GE(P)AF/GUR-29/2020-21

Amount

De-Silting and cleaning/clearing of blockage in sewage lines between manholes by roding using bamboo split, cleaning machine or by mechanical means from man holes to man hole, Nahni/Floor traps to gully trap & gully trap to man hole/IC together with (where ordered ), taking out all debris/sluge from soil pipe lines, vertial stack pipes and removing the debries/sluge from site to out of MOD Land by using tractors or other vehcles including loading, unloading material and depositing off the material by burying in pits as per norms and as directed by Engineer-in-Charge and covered with earth including flushing the line with water & testing after cleaning complete for pipe lines upto 100mm bore complete all as specified.

All as per item No 1.01 here in before but 150 mm bore SGSW/ RCC NP2 pipes.

All as per item No 1.01 here in before but 200 mm to 300 mm bore RCC NP2 pipes.

All as per item No 1.01 here in before but 450 mm bore RCC NP2 pipes.

Cleaning of Gulley Trap including removing GT cover, cleaning of Sludge, earth and all sewarage material flush with water and refixing the GT cover complete all as specified and as directed.

Cleaning of Manhole up to 1.00m Depth including removing MH cover, Cleaning all mud, silt, floating material, hard material like stone, brick bats inculding cleaning mouth of sewage lines and making free from silt etc, flush with water and refixing the MH cover complete all as specified and as directed. Note: This item shall not be operated with items 1.01 to 4 above.

All as per item No 6 here in before but depth of Manhole 1.00 to 2.00 m.

All as per item No 6 here in before but depth of Manhole 2.00 to 3.00 m.

All as per item No 6 here in before but depth of Manhole 3.00 to 4.50 m.

All as per item No 6 here in before but depth of Manhole 4.50 to 6.00 m.

De-Silting & Cleaning of Sludge from tank up to 20 m deep by mechanically operated Sucking/hydraulic pressure machine and taking out Sludge/muddy/ Sewerage water including taking out all debris/sluge from Sludge Tank and removing the debries/sluge from site to out of MOD Land by using tractors or other vehcles including loading, unloading material and depositing off the material by burying in pits as per norms and as directed by Engineer-in-Charge and covered with earth including flushing the line with water & testing after cleaning complete for pipe lines upto 100mm bore complete all as specified.

De-Silting and cleaning of existing storm water drain including removing RCC drain cover and refixing in same/other position after cleaning silt, soil, vegetation growth and removing of rubbish from the premises all as directed by Engineer-in-Charge.

Cleaning of blocked rain water pipe of dia 100-150mm near path and drain and rubbish of the premises complete all as specified and as directed by Engr-in-charge.

Demolition of reinforced Cement concrete of any description and in any position not specifically provided complete all as specified and as directed by Engr-in-charge.

M&L for RCC (1:1.5:3) nominal mix, type A1 using 20mm graded stone aggregate as in drain slab supported on walls and the like complete all as specified and as directed by Engr-in-charge.

M&L for TMT bars 10mm dia and over in dia, cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia as in main distribution bar complete all as specified and as directed by Engr-in-charge.

M&L for use and waste of form work to bottom and sides of slab, for rough finished flat surface of concrete complete all as specified and as directed by Engr-in-charge.

Demolition/Breaking up Drain Pipes (SGSW), AC/RCC 150 mm to 200 mm dia, Jointed in Cement Mortar of any description including demolition of PCC of the Pipes with Bed, complete all as specified and as directed by Engr-in-charge.

M&L for reinforced cement concrete pipe 150 mm dia class NP2 laid and jointed complete with collars as in sewar lines and jointed complete all as specified and as directed by Engr-in-charge.

M&L for reinforced cement concrete pipe 200 mm dia class NP2 laid and jointed complete with collars as in sewar lines and jointed complete all as specified and as directed by Engr-in-charge.

M&L for Cement Concrete (1:3:6) Type C1 (20mm Graded Stone Aggregate) Bed for Drain Pipes of Bore 150mm including Packing under and Haunching against the Sides of Pipes after they are laid in Foul Condition and Testing, complete all as specified and as directed by Engr-in-charge.

M&L for Cement Concrete (1:3:6) Type C1 (20mm Graded Stone Aggregate) Bed for Drain Pipes of Bore 200 mm including Packing under and Haunching against the Sides of Pipes after they are laid in Foul Condition and Testing, complete all as specified and as directed by Engr-in-charge.

Cleaning top surfaces of Roof by brooming, wire brushing, removing grass, raking out joints to receive plaster and removing debris, grass etc around MH, Sewage tank, roof, Drainage near staging of solar heaters etc to receive plaster complete all as specified and directed by Engineer-in-Charge. Note : (a) Plaster shall be measured and separately under appropriate item of Sch ‘A’. (b) .Rate of this item is inclusive of disconnect fitment as solar heater etc and refixing in same position after completion of cleaning/repairing of surface.

M&L for 15 mm thick cement plastering in CM 1:4 on brick/concrete surfaces of roof and parapet, mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately.

Supply only liquid water proofing compound complete all as specified and as directed by Engr-in-charge.

M&L for roof treatment applying PU & Acrylic based Elostomeric Coating in UV shafe having OVOC coating apply two coat over clean plastered surface of roof complete all as specified and as directed by Engr-in-charge.

S&F in repairs, SFRC perforated drain cover of size 600mm x 450mm x 70mm thick srounded with steel strip 70x1.25mm Reinforced as per manufacturer's design in Munufactured proccess laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes for item 27 to 30: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole. (c) Or equivalent as approved by GE. (ii) Contractor shall provide PV alongwith manufacturer test certificate of SFRC cover.

S&F in repairs, SFRC MH cover of size 600mm x 450mm x 70mm thick srounded with steel strip 70x1.25mm Reinforced as per manufacturer's design in Munufactured proccess laid over existing drain/MH complete all as specified and as directed by Engr-in-Charge.

S&F in repairs, SFRC MH cover of size 600mm x 600mm x 70mm thick srounded with steel strip 70x1.25mm Reinforced as per manufacturer's design in Munufactured proccess laid over existing drain/MH complete all as specified and as directed by Engr-in-Charge.

S&F in repairs, SFRC GT frame and cover of size 300mm x 300mm x 50mm thick srounded with steel strip 50x1.25mm Reinforced as per manufacturer's design in Munufactured proccess laid over existing GT complete all as specified and as directed by Engr-in-Charge.

Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, benching, bed block for rungs, window cills etc including necessary form work complete all as specified and as directed by Engr-in-charge.

M&L for 75mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor and paving including finishing even and smooth without using extra cement, laid in alternate panels by providing 50mmx4mm glass strips complete all as specified and as directed by Engr-in-charge.

Demolition of stone slab and tiles fixed with bedded and jointed of any description complete all as specified and as directed by Engr-in-charge.

M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed by Engr-in-charge.

M&L for 60mm thick Machine pressed precast concrete inter locking paver block M-35 Gde any shape and size with Grey cement and no pigment conforming to IS 15658-2006 grouted with dry fine sand over and including 25mm thick sand cushioning complete all as specified and as directed by Engr-in-charge.

All as per item No 36 here-in-before but using old serviceable inter locking paver blocks.

M&L for 20 Granite (of any type) work (table rubbed and polished, rounded and chamfered ) in steps, jambs, pillars, window- cills, cooking platforms in full length upto 2.50 mtr and laid over and including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble powder with admixture of pigment to match with shade of granite complete all as specified and as directed by Engr-in-charge.

M&L for Chequered Cement Concrete Tiles 300X300X 25mm thick pre printed colour, Set and Jointed in Neat Cement Slurry with Grey Cement and Pigment over and including Screed Bed 15mm thick in Cement Mortar (1:4) as in Path, complete all as specified and as directed by Engr-in-charge. Make-Estilo( RT 30020 Tulip) or equivalent out of make specified in list of makes.

Demolition of brick work build in cement morter of any description and removing of rubbish from the premices complete all as specified and as directed by Engr-in-charge.

M&L for brick work old size burnt clay bricks, sub class B, straight or curved on plan exc 6m mean radium built in CM 1:6 complete all as specified and as directed by Engr-in-charge.

Taking down Cement Plaster from wall of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed.

M&L for rendering 15mm thick in cm 1:4 by using manufacturer/ washed plastered sand on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement including necessary scaffolding complete all as specified and as directed by Engr-in-charge.

Dismantling of existing loose grit wash panel of any description in different level upto 12 storied building (40m ht) including taking down plaster and raking out joint and roughening the old surface to receive new finishes including skefolding/moving trolley for upto 12 storied complete all as specified and as directed by Engr-in-charge.

M&l for Washed stone grit plaster on exterior walls on two layers , under layer 12 mm cement plastered 1:4 (1 cement : 4 coarse sand) using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster , furrolowing he undre layer with scratching tools , applying cement slurry on the under layer @ 3 kg of cement per sqm, top layer 15 mm in cement mortar 1:1/2:2 ( 1 cement:1/2 coarse sand: stone chipping 10 mm nominal size) in panel with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chipping complete all as specified (Payment for providing grooves shall be made separately) complete all as specified and as directed.

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth and getting out in soft/loose soil complete all as specified and as directed by Engr-in-charge.

Returning filling with excavated soil obtained from excavation in layers n exc 25cm including spreading levelling watering and well ramming complete all as specified and as directed by Engr-in-charge.

Removing of old debris obtained from excavation/demolition building material to a distance exc 10 Km but n exc 15 Km and deposited out side the MD land complete all as specified and as directed by Engr-in-charge.

M&L as in repair for Stainless Steel letters or figures (Block, Roman, Itallic or Indian) of size n exc 30cm high fixed with Brass CP Machine Screw in Piller/Post/Gate including necessary Scaffolding complete all as specified and as directed by Engr-in-charge.

M&L for Painting lines, dashes, arrows, letters, etc. on roads pavements & the like exc 10cm but not exc 15cm wide with road marking paint, white or golden yellow or other complete all as specified and as directed by Engr-in-charge.

M&L for precast cement concrete Kerb stone of PCC 1:2:4, Type B1 (using 20mm graded stone aggregate) including chamferring etc and finishing exposed surface in CM 1:4 with even and smooth finish, including fixing in position and removing old kerb stone complete all as specified and as directed.

M&L for applying two coat weather/dust proof paint in Strips exc 15 Cm, over a coat of primer including preparation of new plastered wall surfaces complete all as specified and as directed by Engr-in-charge.

Dismantling of expanded metal any thickness or mesh of weight n exc 4.0Kg/Sqm fixed with fillets of any description complete all as specified and as directed by Engr-in-charge.

S&F 4mm dia chain link MS galvanised fencing of 75x75mm size including line wire, fillets, straining bolts etc complete all as specified and as directed by Engr-in-charge.

Repairing of old chain link fencing, including removing from fillets, straining bolt, removing and refixing of post with PCC, if required and fixing in position in a straight line complete all as specified and as directed by Engr-in-charge.

M&L for framed work such as grills, grating etc with end of bars shouldered and forged into spikes, barred iron doors, ballusters, walk ways railings etc and similar work confirming to Fe 290 Gde E 165 including dismantling of old work complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge.

M&L for cleaning, scrapping of old steel/iron surface and apply one coat synthetic enamel paint including preparation of surface exc 10cm in width or girth complete all as specified and as directed.

Note:- The amount of Rs 81200/- against Schedule of Credit on Page No 133 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

a.k constructions

V.K. Enterprises

M/S Parshant Associates

BRIJ MOHAN LAL AND CO.