Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.8 LAccepted-AOC 60 4 MOTILAL GUPTA ROAD GROUND FLOOR KOLKATA 700 008 | KOLKATA | WEST BENGAL | 700008 | L1 | Accepted-AOC Being lowest bidder and reasonable | |
| 2 | L2₹44.3 L+₹3.1 L (7.43%)Rejected-Finance 2 10 PANCHANANTALA ROAD KOLKATA 700 041 | KOLKATA | WEST BENGAL | 700041 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹50.6 L+₹9.4 L (22.7%)Rejected-Finance 8 28 BIJOYGARH P O JADAVPUR KOLKATA 700 032 | KOLKATA | WEST BENGAL | 700032 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹50.9 L+₹9.7 L (23.4%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹53.3 L+₹12.0 L (29.1%)Rejected-Finance 51 1 FULBAGAN ROAD BAGHAJATIN KOLKATA 700086 WEST BENGAL | KOLKATA | WEST BENGAL | 700086 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
19 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
REPAIRS AND CLEANING OF DRAIN, MOAT WALL, RCC JALI AND MISC B/R WORKS ALONGWITH CERTAIN REPAIR TO SEWAGE LINE/SEWAGE SYSTEM OF ZONE-I OF AGE B/R-II UNDER GE (FW) KOLKATA
2022_MES_555613_4
8914/FW/E8
Open Tender
Civil Works
Item Rate
210 days
GE(FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE(FW) Kolkata
₹92,000
9 Mar 2023
3 Dec 2022
20 Dec 2022
3 Dec 2022
19 Dec 2022
5 Dec 2022
Amount
Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thick below or above GL complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description in any position not otherwise specially provided for complete all as specified and as directed..
Demolition of cement concrete (reinforced) of any description (reinforcemet cut as required to facilate demolition etc.,) complete all as specified and as directed..
Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.
Dismantling structural steel or mild steel work of any description not otherwise specifically provided for etc., complete all as specified and directed.
Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debris/ rubbish, etc., complete all as specified and as directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing tiles and rubbish off the premises and disposed outside MOD area complete all as specified and directed.
Demolition of stone/concrete slabs and tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar, etc complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting any gauge or any thickness in roof covering including stacking serviceable materials of re-use and removing unserviceable materials complete all as specified and directed.
Dismantling of post struts (wood, steel or RCC) any section incl taking out embedded portion in natural ground and making good disturbed ground complete all as specified and directed.
Dismantling of old chain link wire mesh fencing including flat iron, ms round supporting bars, bracing bar etc complete all as specified and directed.
Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches of 100 mm internal dia complete all as specified and as directed.
All as per Item No. 12 above, but for 150 mm bore cast iron/RCC pipes
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 150 mm set in cement mortar complete all as specified and as directed.
All as per Item No. 14 above, but for demolition and breaking up drain pipes 200 mm bore drain pipes
All as per Item No. 15 above, but for demolition and breaking up drain pipes 300 mm bore drain pipes
All as per Item No. 16 above, but for demolition and breaking up drain pipes 450 mm bore drain pipes
Excavation in post holes each not exc 0.5 cum getting out returning filling in and removing earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance not exc 50m and making good surface as in soft /loose soil complete all as specified and directed.
Excavation in trenches n exc 1.50 m wide and n exc 1.50m depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exc 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in soft/loose Soil, complete all as Specified and as directed.
All as per item No.19 above, but for excavation depth exc 1.5m upto 3.0 m deep
Returning filling in incl spreading , levelling , watering and well ramming in layers not exc 25 cm as in soft/ loose Soil, complete all as Specified and as directed.
Removing excavated materials, soil etc from site and disposed off outside MOD area complete all as specified and as directed.
M&L Brick Work with Sub-Class ‘B’ fly-ash Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.
M&L Brick Work with Sub-Class ‘B’ fly-ash Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished rendering surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for use and waste for form work to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams for rough finished surfaces of concrete flat complete all as specified and directed
M&L for RCC 1:1½:3, type A1 (nominal mix) (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5 mtr span complete all as specified and directed. (Note : Reinforcement to be measured and paid separately).
M&L for PCC (1:3:6) type C-2 (40mm graded stone agg) as in foundations, sub base of floor/footpath, filling and mass concrete all as specified and directed.
M&L Pre-cast Reinforced Cement Concrete type A1(1:1½:3) using 20 mm graded crushed stone aggregate) by volumetric mix as in Cover Slab of drain, Man Holes, Septic Tanks, etc., set in Cement Mortar 1:4 including necessary forms, moulds, etc., complete all as specified and as directed. (Note : Reinforcement to be measured and paid separately).
S&F 35mm thick precast cement concrete Type B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) louvers and jallies including all moulding, but excluding frame set in cement mortar 1:4, as in repairs, complete all as specified and as directed.
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to length, bent to shape required as in reinforcement and binding with MS wire ( annealed ) not less than 0.90 mm dia complete all as specified and directed .
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured Galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile Galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile Galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
All as per Item No. 33 above, but 0.50 mm thick coloured plain Galvalume sheet as in ridge/valley gutter of roof.
M&L ornamental MS framed work such as grills, gate, gratings etc with end of bars shouldered and rivets welded etc framed guard bars barrel iron door ladder framed balusters walk ways, railing, conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
M&L mild steel Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. (NOTE: PCC for foundation will be measured separately)
Fixing only RCC post or angle iron post (obtained from item No 9 here-in-before) complete all as specified and as directed. (NOTE: PCC for foundation will be measured separately)
M&L Mild Steel Screw Bolts (machine made) 11 mm to 15mm diameter of neck and length of bolt exc 5 Cm and not exc. 10 Cm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified and as directed.
S&F MS 10 mm dia round bar and fixed independently to angle iron for chain link fencing cut to length, bend to shape required, complete all as specified and as directed
S&F in repairs galvanized 2 strand steel barbed wire fencing conforming to IS : 278, with 2.24 mm dia. barb wire conforming to IS : 280 with zinc coating as per IS : 4826, barbed with 2 mm dia. barbs at 75 mm spacing and straining and fixing to any type of standard rails/RCC fencing posts straining bolts, including securing or tying at crossing with and fixing of galvanized mild steel wire, staples or steel pins etc. incl taking down existing fencing complete all as specified and directed. (Note: - Each line of wire will be measured)
S&F 4 mm dia PVC coated galvanised mild steel chain link fencing of mesh size 50 x 50 mm fixed with straining bolts including line wire any mesh size and type to any type of standards, rails, straining bolts etc. including provision of binding wire, complete all as specified and as directed. NOTE: MS post, MS round bars, flat iron, nuts & bolts shall be measured and paid separately.
Refixing of old serviceable chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed. NOTE: MS post, MS round bars, flat iron, nuts & bolts shall be measured and paid separately.
M&L for cement concrete (1:2:4) type B-1, using 20 mm graded stone aggregate, as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
M&L for providing 25 mm thick, Plain Cement Concrete (1:2:4) type B-0 (using 12.5 mm graded aggregates) as in sub base of floor completed all as specified and directed.
M&L for providing 75 mm thick, Plain Cement Concrete (1:3:6) type C-2 (using 40 mm graded aggregates) as in sub base of floor completed all as specified and directed.
M&L for providing 100 mm thick, Plain Cement Concrete (1:2:4) type B-2 (using 40 mm graded aggregates) as in sub base of floor completed all as specified and directed.
M&L for providing PCC (1:2:4) type B-1, using 20 mm graded stone aggregate, as in surface channels and drains including necessary from work complete all as specified and as directed.
M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed
Add or deduct for 25mm girth or part there of over or under 30cm girth in cement concrete, using extra cement, including forms, mould, mitred/stopped ends etc. complete all as specified and directed
M&L Vitrified ceramic coloured (light shade) tiles, double charged, 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm but not exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over and incl screed bed 15mm thick cement mortar 1:4 complete all as a specified and as directed
M&L for full body homogeneous glazed Vitrified ceramic coloured (light shade) tiles, double charged, 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.70 Sqm but not exc 1.90 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over and incl screed bed 15mm thick cement mortar 1:4, complete all as a specified and as directed
M&L for full body homogeneous Vitrified (hard Stone) ceramic coloured (light shade) tiles, double charged, 16 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over and incl screed bed 15mm thick cement mortar 1:4, complete all as a specified and as directed
M&L coloured glazed ceramic tiles in vertical surfaces 450X300X7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, fixed over and incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.
S&F non-skid ceramic coloured tiles (square / rectangular), 7 to 8 mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and directed.
S&F in position, at or near ground level, factory made precast cement concrete kerb stone blocks, in M-25 grade cement concrete, fixed to the required line, level and curvature, jointed in cement mortar 1:3, including making joints with or without grooves (thickness of joints, except at sharp curves shall not be more than 5 mm) including making drainage opening wherever required complete all as specified and directed.
M&L for granite slab of 18 to 20mm thick, of approved quality (table rubbed and polished), machine cut, bedded and jointed with grey cement slurry and pointing with white cement with admixture of pigment to match the shade of granite stone as in steps, jambs, pillars, window cills, cooking platform and the like including grinding and polishing, laid over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for Machine cut kota stone slab flooring /trades 18-20mm thick over 20 mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for preparation of new /old floor and applying one coat of ready mixed paint complete all as specified and as directed..
S&F 20mm thick pre-polished decorative cement concrete tiles of size 300mm x 300mm, as in flooring, laid over and including 20mm thick backing layer of cement mortar (1:6) set and jointed in neat cement slurry and pointed in white cement mixed with admixture pigment to match the shade, complete all as specified and directed by Engineer-in-charge.
S&F 25 mm thick pre-polished coloured chequered tiles of size 400mm X 400mm jointed and pointed in neat cement slurry with white or coloured to match, laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
S&F 15mm thick pre-polished decorative cement concrete tree guard tiles of approved size, design and colour laid on vertical surfaces over 15mm thick backing layer in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with admixture of pigment to match the shade complete all as specified and as directed.
Supply and laying machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size as approved by GE conforming to IS 15658-2006 of 60 mm thickness, M-35 grade, laid to proper slope & gradient over screed bed, joints filled with white cement mixed with pigment to match the shade of paver block complete all as specified and directed. (NOTE: Sand cushioning shall be measured and paid separately)
All as per Item No. 62 above, but using old serviceable blocks obtained from dismantling (NOTE: Sand cushioning, if required shall be measured and paid separately)
M&L Sand filling under floors under paver block, thickness not exc 40 mm including consolidation complete all as specified and as directed
M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by using high pressure jet washer including cleaning the surface by scrapping as required using emery paper, putty blade/scraper as applicable for removing loose paint, corrosion, algae formation etc., to make the surface clean and free from dust, for upto 4 storey height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by scrapping and removing treated surfaces with mechanical wall sander (having vacuum mechanism for suction) having minimum 1500 RPM, sanding pad of 80 grit size having 7"- 9" dia (as required) including cleaning, watering to make the surface clean and free from dust, for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for preparation of new surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc including necessary safety & protective measures such as safety belt, headgear etc, finishing the surface with 2 mm thick exterior wall putty (in two layers) for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L for applying 2mm thick wall care putty (in two layers) on old cleaned surfaces of walls, soffits of chajja, roof slab etc, for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for preparation of old treated/painted surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crackfill paste and applying one coat of weather proof exterior emulsion paint of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of acrylic distemper on new plastered surfaces of ceilings, finished with rollers over a coat of alkali resistant primer complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls and applying one coat of cement base paint with brush complete all as specified and directed.
M&L for preparation of old painted wooden surface of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.
M&L applying one coat of synthetic enamel paint on steel & iron surfaces of any description, exc 10cm width or girth when unconnected with other painting or when painted in different tint including preparation of old painted surface complete all as specified and directed.
M&L Preparing old decorated wall/ plastered/ concrete surfaces of any description, over 10 cm width or girth and applying Two Coats of Synthetic Enamel Paint, complete all as specified and as directed.
S&F in repair RCPC (Reinforced Cement Polymer Concrete) grating slab of size 900 mm x 450 mm x 100 mm thick, of Capacity 3 MT fixed in proper position complete as directed by Engr-in -Charge.
S&F in repair RCPC (Reinforced Cement Polymer Concrete) grating slab of size 600 mm x 450 mm x 100 mm thick, of Capacity 3 MT fixed in proper position complete as directed by Engr-in -Charge.
S&F in repair 450mm dia 50mm thick RCPC man hole cover with frame of 540mm dia, 100mm thick of 3MT capacity fixed in proper position incl taking out existing cover complete all as specified and directed.
All as per item No. 79 above but for 5 MT capacity
S&F in repair Vitreous China Wash Hand Basin 550mm x 400mm in size, white, Flat Back or Angle Back Type, making good disturbed Surfaces in Cement Mortar 1:3, providing CP waste coupling and PVC waste pipe and connected Items, complete all as specified and directed. (Make of WHB : PARRYWARE, Model: FLAIR / HINDWARE, Model: MARIO / JAQUAR, Model: CONTINENTAL / CERA, Model: CLAIR/ASIAN PAINTS, Model: SIRIUS) (NOTE: Quoted rate shall be deemed to be inclusive of the cost of brackets, waste coupling and waste pipe)
S&F in repairs Vitreous china, white, half stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe incl providing 32mm bore PVC discharge pipe complete all as specified and directed. (Make of Urinal : CERA, Model: CARYS / HINDWARE, Cat No: CORTO / PARRYWARE, Model: Aquaseal N )
S&F in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 / CERA, Model: COVY)
S&F in repairs vitreous china (white) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK)
S&F in repair vitreous china floor mounted coupled closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC seat cover and connecting fittings complete all as specified and directed. (Make :CERA, Model : CALIBRE / ASIAN PAINTS, Model: PRIMUS / JAQUAR, Model: CONTINENTAL / HINDWARE, Model: ALPHA S 220 / PARRYWARE, Model: INDUS)
S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART /ESSCO, Cat No: WHE-WHT-183NL/ASIAN PAINTS, Model: TREND)
S&F in repairs Low density polythelene pipe connection, comprising of 15 mm dia 600 mm long having PTMT union at each end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, ESS ESS, or equivalent model in SHAKTI / JEXON)
Supply and laying 450 mm bore reinforced concrete pipe of Class NP-2, laid and jointed with jute & cement mortar 1:1, complete with collars all specified and as directed.
All as per item No. 88 above, but 300 mm bore pipe
All as per item No. 89 above, but 200 mm bore pipe
All as per item No. 90 above, but 150 mm bore pipe
Supply, laying, jointing & testing 150 mm internal dia salt glazed stone ware drain pipes laid in trenches and jointed as specified in SSR complete all as specified and directed.
M&L concrete bed to drain pipe including packing under and haunching against the side of drain pipe after laid and tested in PCC 1:3:6 type C2 for 450 mm bore RCC pipes complete all as specified and directed.
All as per item No. 93 above, but PCC bedding for 300 mm bore pipe
All as per item No. 94 above, but PCC bedding for 200 mm bore pipe
All as per item No. 95 above, but PCC bedding for 150 mm bore RCC/ SGSW pipe
Supply and fixing 110mm bore PVC (SWR) pipes, single socketed, in any length, with rubber ring joints, fixed to wall all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing 110 mm PVC (SWR) Bend any radius complete all as specified and as directed by the Engineer-in-charge.
Supply and Fixing 110 mm PVC (SWR) vent Cowl, complete all as specified and as directed by the Engineer-in-charge.
S&F in repair Cast iron work grade FG -150 unmachined in brackets, gratings, railing, frames, manhole covers and similar articles exc 5 Kg each complete all as specified and as directed.
All as per Item No. 100 above, but not exc 5 Kg each
Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), finished smooth and reforming benching for 150 mm bore pipe as required and as directed by the Engineer-in-Charge.
-ditto- all as per Item No. 102 above, but for 200 mm bore pipe
-ditto- all as per Item No. 103 above, but for 300 mm bore pipe
S&F in repair cast floor trap 100 mm dia with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with run lead complete all as specified and directed.
S&F Salt-gauged stoneware gully traps, square or round mouthed, type 'P', size 150x150 mm complete all as specified and directed.
Cleaning of gully trap of any depth (not exceeding 0.50 metre each), by taking out accumulated garbage, silt, mud etc and removing the same at a distance not exceeding 50 metre (where directed), washing and well flushing of the gully trap with water complete as directed by the Engineer-in-Charge.
Cleaning of floor trap (of any type/size), by taking out accumulated silt, mud etc and removing the same at a distance not exceeding 50 metre (where directed), washing and well flushing of the floor trap with water complete as directed by the Engineer-in-Charge.
Cleaning of blocked water closet (of any type/pattern) including connected CI pipe line (of any bore) upto 1st manhole and well flushing with water and testing on completion complete all as specified and directed.
Cleaning of blocked waste line (of any bore) from sink/urinal/wash basin to floor trap manually (by pushing bamboo split, tied with gunny bags at one end to other) including dewatering and well flushing with water and testing on completion complete all as specified and directed.
Cleaning of Manhole chamber of any size, of depth not exc 1.0 metre each, mechanically, removing muck/sludge/silt/mud, liquid etc under any position including foul condition and cleaning the inlet and outlet with water, placing back the manhole cover in position and disposing off the sludge/debris out of MOD land complete all as specified and directed.
All as per Item No. 111 above, but for mechanical cleaning of manhole of depth exc 1.0 m but not exc 3.0 m
Cleaning of sewage line/ storm water line of 150 mm bore by mechanically using trolley mounted water jetting machine including dewatering, de-silting and well flushing the line with water and tesing on completion complete as directed by the Engineer- in- Charge.
-ditto- as per Item No. 113 above but for cleaning of 200 mm bore sewage line/storm water line
-ditto- as per Item No. 114 above but for cleaning of 300 mm bore sewage line/storm water line
Cleaning of septic tank, any size, mechanically, removing muck / sludge / silt /mud, liquid etc from inside of septic tank, in any position including foul condition and cleaning the inlet and outlet with water, placing back the cover slab in position and disposing off the sludge/debris out of MOD land complete all as specified and directed.
NOTE FOR ITEM NO. 111 to 116 :- (1) The sludge/debris shall be disposed off in sealed containers or sludge removal tankers. Contractor is expected to consider this aspect whicle quoting his rates. No claim, whatsoever, shall be entertained on this account afterwards. (2) Item No 79 and 80 shall be executed only on urgent requirement. (3) Mechanised cleaning vehicle, water jetting machine including fuel and operater, as and when ordered by the Engineer-in-Charge shall be provided by the contractor under his own arrangement. No extra claim shall be admissible during currency of work.
S&F Cast iron (sand cast) soil, waste and vent pipes 100 mm bore of any length with or without ears with cement joints all as specified laid in trenches or in floors complete all as specified and directed.
-ditto- but 100 mm bore pipes fixed on walls
-ditto- but 150 mm bore pipes fixed on walls
S & F CI bend (any radius), diminishing pieces or tapers (larger bore measured) for 100 mm bore pipe complete all as specified and directed.
-ditto- but fitted with oval access door
S & F 100 mm bore CI (sand cast) vent Cowl, complete all as specified and directed.
S&F CI branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parellel branches, for 100mm dia pipe complete all as specified and directed.
S&F cast iron rain water socket pipes, without ears, conforming to IS:1230-1979, 100 mm bore, fixed with cement joints on walls incl necessary scaffolding complete all as specified and directed.
S & F 100 mm bore CI rain water bends or elbow square complete all as specified and directed.
Cutting of vegetation, grass, bush, weeds, trees upto 1 metre height above the ground level in around 3 metre of the periphery of of manhole, drain etc and removing the tree roots complete and removing the vegetation, debris etc to a distance exc 500 metre but not exc 1 km complete all as specified and directed.
M&L for up-rooting of tree from walls of bldgs up to extended root and spraying of Muriatic Acid required quantity complete for any location of bldg up to 04 storey and making good distributed surface with cement mortar (1:4) or cement concrete type C1 (1:3:6) using 20mm graded aggregate complete all as specified and directed.
Cleaning of existing covered drain, of average opening width 250mm and depth 250 mm (approx half of depth filled up), by removing and re-fixing of cover-slab (wherever applicable) taking out accumulated silt, mud, earth, rubbish, vegetation etc from the drain and removing the same at a distance exceeding 500 metre but not exceeding 1 Kilometre where directed, washing of the drain with water complete all as directed by the Engineer-in-Charge.
All as per Item No. 129 above, but drain of average opening width 450mm and depth 400mm
All as per Item No. 130 above, but drain of average opening width 700mm and depth 400mm
All as per Item No. 131 above, but drain of average opening width 800mm and depth 700mm
ARATI TRADING CO
DEB AND COMPANY
DILIP CONSTRUCTION
NUPUR CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .