Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.2 LAccepted-AOC | L1 | Accepted-AOC DUE TO QUOTED RATE IS L1 | |
| 2 | L2₹20.2 L+₹93,277.35 (4.85%)Rejected-Finance KALIBARI ROAD TINSUKIA TINSUKIA ASSAM 786171 | TINSUKIA | ASSAM | 786171 | L2 | Rejected-Finance DUE TO QUOTED RATE IS HIGH | |
| 3 | L3₹20.6 L+₹1.4 L (7.39%)Rejected-Finance MILLONALLY LANE 3 POST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L3 | Rejected-Finance DUE TO QUOTED RATE IS HIGH | |
| 4 | L4₹21.0 L+₹1.7 L (9.02%)Rejected-Finance C O ADNEEDS ENTERPRISES TIRAPGATE TIRAPGATE LEKHAPANI TINSUKIA ASSAM 786182 UDYAM AS 26 0000077 | TINSUKIA | ASSAM | 786182 | L4 | Rejected-Finance DUE TO QUOTED RATE IS HIGH |
Tender Value
₹19.2 L
EMD Value
₹38,400
Closing Date
12 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lekhapani
GE Lekhapani Tinsukia, Assam
PROVN OF TOILET BLOCK AT 4C AND PROVN OF TOILET AND BATHING POINT AT TEZU MIL STN UNDER GE LEKHAPANI
2022_MES_544381_4
8682/E8
Open Tender
Miscellaneous Works
Item Wise
180 days
GE Lekhapani
Class E Category a (I)
4 documents required · 4 mandatory
₹500
GE Lekhapani
₹38,400
Yes
19 Jan 2023
18 Nov 2022
17 Dec 2022
18 Nov 2022
12 Dec 2022
26 Nov 2022
Amount
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft / loose soil for roads to required slope gradient, chamber etc complete all as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundations,laying cables,pipe lines,etc and getting out in soft/ loose soil complete all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed.
All as per item No.3 above but depth exc 1.5 m deep but n. exc 3 m complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft loose soil complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
M&L for loose filling with broken brick aggregates of gauge 80 to 150 mm in soakage pit, soak well etc complete all as specified and directed
M & L PCC (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and directed.
M&L Providing RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in foundation, footings, plinth beams,etc and similar works,complete all as specified and directed.
All as per item No 09 above but in coloumns.
All as per item No 09 above but in beams and lintels.
All as per item No 09 above but in chajjas
All as per item No 09 above but as in slabs supported on walls, beams & columnsin floor roof, landing ,etc complete all as specified and directed.
M&L Providing RCC (1:1.5:3) (Nominal mix) type A-1 (using 20mm graded stone aggregate) as in cover slab for manholes, etc set in CM (1:4) with plain fair faces incl chamfered, weathering, throating etc incl necessary use & waste of form work complete all as specified and directed
M&L Providing PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges and other similar bands including use of formwork complete all as specified and directed.
M&L Providing PCC (1:2:4), type B-1, (using 20mm graded stone aggregate) as in bed plates and similar articles including necessary form work,complete all as specified and directed.
M & L 25mm thick Damp proof course to horizontal or vertical surfaces incl necessary formwork in PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) and mixed with integral water proofing compound ,complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
Supply only Integral water proofing compound complete all as specified and directed.
Use and waste of formwork to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels. Cantilevers, shelves including supports, overhangs, etc also splays between floor and beam etc for rough finished flat surfaces of cocrete complete all as specified and as directed.
Use and waste of formworrk to sides of pillars, posts, struts, piers, coloumns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed.
Use and waste of formwork to soffits of suspended slab such as roof slabs, floor slabs, landing and similar works,etc with rough finished flat surfaces complete all as specified and directed.
Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surfaces of concrete complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6 ) ccomplete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
M&L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM (1:6) complete all as specified and directed.
M & L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed.
All as per Item No.27 above, but TMT bars 6 to 8 mm dia complete all as specified and directed.
All as per Item No.27 above, but 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders,complete all as specified and directed.
S& F Mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 4923-1979 grade St- 310 complete all as specified and directed
S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade YSt.-310 complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165,complete all as specified and directed.
S&F Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.
S & F Mild steel bolts with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long and diameter of neck exc 12 mm and n.exc 20 mm complete all as specified and directed
M&L Pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L Pre-painted hot dip aluminium-zinc alloy metallic coated Plain steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in Evas roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F Figured glass , pin headed type 3 mm thick, and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having maximum density of 650 kg/Cum and screw withdrawal strength of 1800N (Face)& 900N (Edge), minimum compressive strength 50N/Sqmm, modulus of elasticity 800N/sqmm and resistance to spread of flame of class A category withproperty of being termite , norer proof and , water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star head counter sunk SS screws, complete all as per direction of Engineer-in-charge.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door / windows / Ceosetory windows & other frames/Chowkat of size 50x100mm comprising of virgin PVC polymer of K valve 58-60 (Suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having mimimum frame density of 750kg/cum, screw withdrawal strength of 2200N (Face) & 1100 N (Edge), minimum compressive strength of 58N/Sq mm, modulus of elasticity 900 N/ Sq mm and reristance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge.
S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F 100 mm stainless steel butt hinges with necessary screws,etc fixed to PVC door complete all as specified and directed.
S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified and directed.
M & L Hardcore of gauge nexc 63mm deposited spread and levelled in layers nexc 15cm thick watereed and rammed to a true surface with broken stone or boulders
M&L 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.
M & L Chequered cement conc tiles cast in rubber moulded glossy finish of approved colour general purpose double layer of size 25cm x 25cm x 22mm thick with mixture of white and grey cement in equal proportions and pigments set and jointed and pointed in neat cement slurry in floor incl layer over 15mm thick bedding of CMr (1:6) complete all as specified and as directed
M & L 25 mm thick PCC (1:2:4) type B-0 , (12.5mm graded aggregate) as in floors complete all as specified and directed.
M&L Glazed coloured ceramic tiles of size 300x450x6 to 7mm thick,as in vertical surfaces such as skirting,dado,etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over and including 10 mm thick rendering as in backing coat in CM(1:4) complete all as specified and directed.
M&L Coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile not exceeding 0.18 Sqm as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed.
M&L for 50 mm thick PCC (1:3:6) type C-1, (using 20 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete as specified and directed.
M&L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces including finished fair and even complete all as specified and directed.
M&L Prepration of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L Rendering 10.mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified and directed.
M&L Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L Rendering 10.mm thick plaster in CM (1:4) on fair faces of ceilings including finishing top even and smooth without using extra cement complete all as specified and directed.
M&L Preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.
M&L Preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paintover a coat of red oxide primer complete all as specified and directed.
S&F GI pipes15mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F GI pipes 20mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
S&F Fancy type long body 15mm dia Bib taps cast copper alloy, chromium plated screwed down to iron pipe or for brass ferrule & fixed complete all as specified and directed.
S&F Fancy type swan long neck 15mm dia pillar taps suitable, cast copper alloy with capstan heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F Vitreous china wash down water closet, "Pedestal pattern with fixing bolt, plastic water closet seat cover, white, closed pattern with flat bottom and cover with aluminised hinging device, complete all as specified and directed.
S&F Vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of P or S trap embedded in cement concrete bedding complete all as specified and directed.
S&F Wash basins white, vitreous China, size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed to wall complete all as specified and directed.
S & F Vitreous china urinal, half stall type, flat back, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, grating and union for discharge/waste pipe, CP screws etc complete all as specified and as directed.
S & F Health flucet 15mm dia with 1.5mtr CP flexiable pipe complete all as specified and as directed.
S&F PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe, brackets all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F 15mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
15 mm dia stop valves, cast copper alloy chromium plated , concealed type with long shank and cap screwed down high pressure with crutch or butterfly handle for iron pipe or for union, complete all as specified and as directed.
S&F 15mm swivel shower with arm 195mm long of PTMT of any colour for fixing with 15mm pipe (Min weight 40 gms) complete all as specified and as directed.
S&F Towel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and as directed.
S&F Rotational moulded polyethylene water storage tanks of 1000 ltr capacity,(cylindrical vertical with closed top) double layered,hoisted and fixed in position all as specified in SSR part-I and complete all as specified and as directed.
S&F 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified and directed.
M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
S & F Salt glazed stoneware gully traps square or round mouthed type P of size 150 x150mm complete all as specified and as directed.
S & F 110mm PVC (SWR) junction single (Single T) equal or unequal with access door
S&F PVC (SWR) bends 110mm dia any radius all as specified and directed.
S&F PVC (SWR) bends 75mm dia any radius all as specified and directed.
S & F PVC (SWR) vent cowl 110 mm bore fixed with pipe complete all as specified and as directed.
S&F PVC (SWR) vent cowl 75mm bore fixed with pipe complete all as specified and as directed.
S&F PVC (SWR) pipes 160mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
M&L PCC ( 1:3:6 ), type C-2 (using 40 mm graded stone aggregate), as in bed to drain pipes of 150mm bore incl packing under and haunching against the sides of pipes after thy are laid and testing complete all as specified and as directed.
M & L Surface point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables of 2x1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC casing & caping terminated in PVC flush box for fixing of switches, sockets, fan regulators etc for one light point controled by one one way 5 Amp switch complete all as specified and as directed.
All as per item No. 88 above but for one 15 Amps socket outlet but using 2.5 sq mm,copper conductor with 2.5 sq mm,PVC insulated single core cable for earth continuity conductor,complete all as specified and as directed.
M & L for concealed point wiring complete with 1.5 sq mm FRLSH,PVC insulated multi standard copper conductor single core cable 1100 volts grade,drawn into and including non metalic PVC rigid conduit medium grade of size not less than 20mm bore and conduit accessories fixed on wall roof etc, and including provn of PVC insulated 1.5 sq mm copper conductor cable for earth continuity and connected to common earth dolly and pressed steel terminal boxes made out of 1.6 mm thick MS sheet concealed in wall and laminated sheet cover of 3 mm thick on top for housing the switches socket,outlet etc.,for one light point controled by one one way 5 Amp switch complete all as specified and directed by Engineer-in-Charge. Note: caused of PVC conduit cutting chases of wall making good disturbed wall surfaces including finishing with cement mortor 1:4 matching with existing shade of the painted surface are deemed to be included in the quoted rate.
All as per Item No.90 above but one Exhaust fan point controlled by one way 5 Amp switch complete all as specified and as directed.
S&F Switch piano flush button, single pole, one way 5 Amp complete all as specified and as directed.
S&F Switch socket combination, 5 in 1, multipurpose 5/15 Amps flush type universal complete all as specified and as directed.
S&F Ceiling rose, 3 terminals, surface bakelite / PVC / Polycarbonate, isolated body to be fixed on wall/ceiling complete all as specified and directed.
S&F Integrated LED tube light fitting complete set 1 x 20 watt connector block etc. complete with all accessories internally pre-wired and connecting the same to ceiling rose with using copper conductor 23/0.0076 flexible twisted twin core cable ,and fixing the light fitting to walls / roof complete all as specified and directed.
S&F Integrated LED tube light fitting complete set 2 ft, 1 x 10 watt connector block etc. complete with all accessories internally pre-wired and connecting the same to ceiling rose with using copper conductor 23/0.0076 flexible twisted twin core cable ,and fixing the light fitting to walls / roof complete all as specified and directed.
S&F Single pole and neutral DB wall mounting type,240 Volts,8Way with 200 Amps rated bus bar,double door suitable for fixing MCB's including connecting etc complete all as specified and directed.
S & F MCB SPN 32 Amps, 10KA, C curve, 240 volts,complete all as specified and directed.
S & F MCB SP 6 to 32 Amps, 10 KA, C curve 240 volts,complete all as specified and directed.
S & F LED building security light fitting 25W new generation energy saving and environmental friendly long lofe made up of pressure diecasr aluminium housing with high power LED as lighting source with IP65 protection and impact resistance of IK07 complete all as specified and directed.
Supply,laying of sand for sand cushioning with a layer of sand 8cm thick before laying of cable and 15cm thick after laying of cable in trenches complete all as specified. Note: punned thickness shall be measured.
M&L Brick protection using old size sub class ‘B’ new bricks, laid flat dry but jointed, laid length wise perpendicular to the axis of cable complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 2 core,10 sq mm laying in trenches/walls complete all as specified and directed.
S&F 40 mm bore GI tubing (light grade) with necessary fittings, clamps,etc laying in trenches/wall for cable protection complete all as specified and directed.
S & F Exhaust fan 300 mm sweep , 1400 RPM,heavy duty metal body and connecting the same to ceiling rose with using copper conductor 23/0.0076 flexible twisted twin core cable ,and fixing the light fitting to walls / roof complete all as specified and directed.
M&L Cutting existing steel tubing for alteration or addition (each cut measured ) bore of pipe 40 mm / 50 mm /80mm complete all as specified and directed.
M&L Screwing existing steel tubign for alterations or additions (or lengthening screw on pipe to form connector complete all as specified and directed.
S&F GI steel water tubing of size 25 mm bore,( medium grade) galvanised with all fittings and accessories complete in trenches/ on wall/under road complete all as specified and directed.
S&F GI steel water tubing of size 40 mm bore,( medium grade) galvanised with all fittings and accessories complete in trenches/ on wall/under road complete all as specified and directed.
S&F Gun metal globe or gate valves of size 20 mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
S&F Gate, globe valves of size 25 mm bore cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F Gate, globe valves of size 40 mm bore,cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed complete all as specified and as directed.
M&L Earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 (using 20 mm graded stone aggregate) for earth pit and 40 mm thick pre-cast RCC cover in (1 : 2 : 4) type B1(using 20 mm graded stone aggregate) with 3 Nos 8 mm dia TMT bars both ways,etc and testing on completion and all as specified and directed by Engineer-in-Charge.
M & L Brick valve chamber of internal size 90 cm x 90 cm x 90 cm by using brick masonry with 23 cm thick wall in CM (1:6) including excavation, earth work in any strata and 75 mm thick PCC (1:4:8) foundation type D-2 (using 40 mm graded stone aggregate) and top of brick walls with 50 mm thick PCC 1:2:4 type B1(using 20 mm graded stone aggregate) and plastering both internal and external surfaces with 10 mm thick CM (1:4) and providing 3.15 mm MS sheet chamber cover double opening arrangement center lock system with40x40x6mm angle iron frame duly painted with two coats of black bituminous paint over one coat of red oxide primer complete all as directed by Eng-in-charge.
M/s NARAYAN MUKHERJEE & CO
M/S D R GOPE
ADNEEDS ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .