SPECIAL REPAIR TO BUILDING NO P-,3, P-6,P-7 AND P-8 OF ASCON NODE PADAMPUR UNDER SRIGANGANAGER MIL STN.

Amount

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) of any description complete all as specified and directed by Engineer-in-Charge.

M&L for 25mm thick cement concrete (1:2:4) type B-0, (12.5 mm graded stone aggregate) as in flooring finishing the surface even and fair complete all as specified and directed by Engineer - in - Charge

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc. laid over and including 15 mm thick screed bed in CM 1:4, set and jointed in cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer-in-Charge

M&L for glazed ceramic coloured tiles interior grade, of size 300x200x7mm thick as on vertical surfaces laid over and including 10mm thick rendering in CM 1:3, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.

M&L machine cut kota stone slab flooring 18-20mm thick (minimum size 55 cm x 55 cm) laid over and including 15 mm thick screed bed in CM 1:6 , set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete all as specified and directed by Engineer - in - Charge.

M&L machine cut kota stone slab in verticla surfaces 18-20mm thick (minimum size 55 cm x 55 cm) laid over and including 10mm rendering in CM 1:4, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete all as specified and directed by Engineer - in - Charge.

M&L for 50mm thick cement concrete 1:3:6, type C2 using 40 mm graded aggregate finished even and smooth as in plinth protection complete all as specified and directed by Engineer - in - Charge

Dismatiling brick tiles or terracing tiles, single layer on roofs and mud phuska complete all as specified and directed by Engineer - in - Charge.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the @1.2 kg/ sqm including cleaning surfaces complete all as specified and directed by Engineer - in - Charge.

M&L for Polythelene film , 150 micron thick, laid over a coat of bitumen primer @ 0.30 to 0.50 kg /sqm complete all as specified and directed by Engineer - in - Charge.

M&L for 80mm thick averaging consolidated thickness mud phuska on flat roofs including 25mm thick mud plaster and 3 mm thick leeping plaster complete all as specified and directed by Engineer - in - Charge.

M&L for 40mm thick brick tiles laid on mud mortar & joints grouted flush in CM (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed by Engineer - in - Charge.

Dismantling of brick work built in cement mortar complete all as specified and directed by Engineer - in - Charge.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks complete all as specified and directed by Engineer - in - Charge.

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer - in - Charge.

M&L 15 mm thick rendering in CM 1:6 on brick / concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

M&L 15 mm thick rendering in CM 1:4 on brick / concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

M&L 5 mm thick rendering in CM 1:3 on ceiling surfaces, finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

M&Lfor preparation of new plastered surface of walls and applying two coats of cement based paint over a coat of white wash complete all as specified and directed by Engineer - in - Charge.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, over a coat of chalk whiting as preparatory to distempering complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer - in - Charge.

M & L for prepration of old decorated plastered surfaces of ceilings by brooming down or steel wire brushing, scrapping down smoke soot, moulds,moss and efflorescent salts and trading oil and greasy spots and applying one coats of white wash complete all as specified and directed by Engineer - in - Charge.

M & L for prepration of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds,moss and efflorescent salts and trading oil and greasy spots and applying one coats of white wash complete all as specified and directed by Engineer - in - Charge.

M&L for complete removal of existing treatment of walls including prepration of surfaces with 3mm thick wall care putty and applying two coats of oil emulsion distemper, over a coat of chalk whiting complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered or un-plastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds,moss and efflorescent salts and trading oil and greasy spots and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge.

S&F in replacement steel rolling shutters, exc 5sqm & n.exc 15 sqm, thickness of laths in 1.25mm, including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as directed, complete, gear operated type with bevel gear box and crank handle complete all as specified and directed by Engineer - in - Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sqm but n. exc.4 sqm each complete all as specified and directed by Engineer - in - Charge.

Taking down chowkats or frames (without taking off shutters from the frame) n. exc.1.5 sqm each complete all as specified and directed by Engineer - in - Charge.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.complete all as specified and directed by Engineer - in - Charge.

M&L for pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer - in - Charge.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number & fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a) complete all as specified and directed by Engineer - in - Charge..

S & F 35 mm thick 2nd class hard wood Plain framed, panelled shutter (any no of panels) with panel of timber flat or both sides feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed by Engineer-in-charge.

S & F 20 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-charge.

S&F galvanised steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed to window / ventilator with stainless steel wire staples complete all as specified and directed by Engineer - in - Charge.

S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed by Engineer - in - Charge.

M&L for preparation of new wooden and wood based surfaces over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed by Engineer - in - Charge.

S & F butt hinges, medium weight, cold rolled mild steel, and fixed of size 100mm fixing properly with screws etc complete all as specified and directed by Engineer - in - Charge..

S&F 150 mm mild steel barrel tower bolts, stove enameled black with bright bolt complete all as specified and directed by Engineer-in-Charge.

S&F 150mm size mild steel pressed handle, oval type, stove enamelled black complete all as specified & directed by Engineer-in-Charge.

S&F 300mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed. complete all as specified and directed by Engineer - in - Charge.

M&L for cement concrete 1:3:6 type C-0(12.5mm graded aggregate) for filling of pressed steel frame and hold fast etc. complete all as specified and directed by Engr-in-charge.

S&F in repair, galvanised steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed to window / ventilator with stainless steel wire staples complete all as specified and directed by Engineer - in - Charge.

S & F in repair, 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-charge.

S&F in repair, hasp and staple, safety type stove enameled black, of mild steel 125mm size complete all as specified and directed by Engineer - in - Charge.

S&F in repairs, 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer - in - Charge.

S&F in repair brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flanges including brackets complete all as specified and directed by Engineer-in-Charge.

Taking down Galvanised steel water tubing with all fittings 15 mm bore complete all as specified and directed by Engineer-in-Charge.

Taking down Galvanised steel water tubing with all fittings 20 mm bore complete all as specified and directed by Engineer-in-Charge.

S & F Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laid in floors and making good disturbed surfaces complete all as specified and directed by Engineer-in-Charge.

S & F Galvanised steel water tubing 20mm bore medium grade with all fittings and fixed to walls, ceiling or laid in floors and making good disturbed surfaces complete all as specified and directed by Engineer-in-Charge.

S&F in repair stop cock / stop valve cast copper alloy, cromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair stop cock / stop valve cast copper alloy, cromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm bore bib tap chromium plated, fancy type, with crutch or butterfly handles, screwed down, screwed for iron pipe and fixed complete all as specified and directed by Engineer - in - Charge.

M&L in repair, CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer-in-charge.

S & F in repair grating doom 100mm dia of PTMT (minimum weight 25 gm) complete all as specified and directed by Engineer-in-charge.

Dismantling and taking down water tank of capacity n. exc. 1000 Litre capacity complete all as specified and directed by Engineer - in - Charge.

S&F white colour rotational moulded polyethylene water storage tank 1000 litre capacity (Cylindrical vertical with closed top) hoisted and fixed in position with necessary fittings complete all as specified and directed by Engineer - in - Charge. (Note : 1. PVC tanks shall be ISI marked and having three layers 2. Ball valve shall be measured paid seperatly

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed by Engineer - in - Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc. complete all as specified and directed by Engineer-in-charge.

S & F 110 mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, fixed to wall with matching PVC SWR rings including cutting holes and making complete all as specified and directed by Engineer-in-charge

S&F in repair, vitreous china wash hand basin white, flat back size 550x400mm including brackets, waste coupling 32mm dia of brass Chromium plated, 15mm dia pillar tap of cast copper alloy with capstan head screwed down, high pressure, with or without letter "Hot or Cold" with long screwed shank and fly nuts, 32mm dia, waste pipe low or high density polyethelene of pressure rating 6 Kg/cm2 and PVC connection with PTMT nuts of 15mm dia and 450mm long cutting for and pinning in end of brackets or erecting stand etc. complete all as specified and directed by Engineer - in - Charge.

Surface excavation n.exc 30 cm deep and averaging 15cm deep, surface preparation as per required gradient and camber including well ramming and getting out in soft/loose soil complete all as specified and directed by Engineer - in - Charge.

M&L 100 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) filling and mass concrete complete all as specified and directed by Engineer - in - Charge.

M&L for sand filling under floors, path or in foundations including watering and consolidation complete all as specified and directed by Engineer - in - Charge.

M&L for coloured precast machine pressed rubber moulded concrete interlocking paver blocks of any shape and sizeconfirming to IS 15658-2006 of 60 mm thickness, M -35 grade,set,jointed & pointed in neat cement slurry in floor/pavings/path etc with grey cement and pigment. complete all as specified and directed by Engineer - in - Charge.

M&L for providing precast cement concrete 1:2:4 Type B-1 using 20mm graded aggregate block masonry with solid blocks, exc. 10 cm in width and set in CM 1:4 (kerb stone) complete all as specified and directed by Engineer - in - Charge

Dismantling AC (corrugated, semi corrugated) sheets in roof coverings complete all as specified and directed by Engineer-in-charge.

Dismantling structural/ mild steel work of any description complete all as specified and directed by Engineer-in-charge.

S&F mild steel of rolled sections as in main and cross beams, hip and jack rafters, purlins etc. fixed with angle cleats or other connecting plates of Fe 410 -W (Gde- E- 250) quality- A.complete all as specified and directed by Engineer-in-charge.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed by Engineer-in-charge.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.

M&L 20mm thick Granite (black) tiles machine cut, laid over and including 15 mm thick screed bed in CM 1:6, set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone with including grinding & polishing complete all as specified and directed by Engr-in-charge.

S&F stainless steel plate rack of size 900mmx775mmx250mm made out of 1mm thick stainless steel of first quality complete. Make:- Anupam International Model No- KPR-311and or equivalent make as approved by GE.

S&F sinks with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and waste coupling 40mm bore dia of discharge pipe , waste pipe plain 90cm long suitable for sink waste coupling, waste jali including making grooves , fixing properly or bedding in cement mortar to walll or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer - in - Charge.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in - Charge.

M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes suitable length and thickness for mounting, switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC FLRS insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.

All as per Srl item No -82 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge. (Make of cable - Polycab/Havells/Anchor)

All as per Srl item No -82 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge. (Make of cable - Polycab/Havells/Anchor)

All as per Srl item No. 82 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge.

S & F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in - Charge.

S & F switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S & F switch socket combination 6 Pin, 5/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S & F Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S & F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.

S & F stepped type,single socket fan regulator not less than 400 watt for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge.

S & F in replacment of existing light fitting with batton integrated LED channel 18 watt, 6500 K (integral sleek extruded polycarbonate body LED with white acrylic cover ) tube light fitting wall mounted complete with rod,driver and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/ connector complete all as specified and directed by Engineer - in - Charge.

S & F in replacment angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.

S & F in replacment Water tight bulk head fitting,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery ,glass well,and including 10 watt LED lamp all as specified and directed by Engineer - in - Charge.

S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLS stranded copper conductor drawn in concealed PVC conduict dia 20mm “medium quality” conduit including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. (Note : PVC cable and PVC conduit shall be ISI marked)

S & F in repairs sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

S&F in repairs Sheet metal enclouser for doble door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 4 Way 415 Volt ISI marked 125Amps busbar stove enameled dust and vermin proof,IP:43 protection suitable for incorporation FP MCCB(V-Tech) N1Frame upto 125A ,Isolators and including give connection with wire and cable etc complete all as specified and directedby engineer -in-charge

S&F in repairs MCCB four pole 63 Amps 25 KA , 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge.

S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

M & L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried in ground (earth pit not less than 2.25 Mtr deep below normal ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level, connecting to the Galvanised iron earth lead 4 mm dia GI earth wire, by means of bolts, nuts check nuts and washers of galvanised iron and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20mm graded stone aggregate with 40mm thick cover of RCC (1:2:4) reinforced with XPM (wieght not less than 4gs/Sqm) and frame of angle iron 25mm x 25mm x 6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm x 8 mm FI with fixing arrangements, funnel, wire mesh and earth work in hard dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 Mtrs all as per electrical Plate No.3 of SSR Part I and connecting to earth test point including taking our unserviceable earthing with all acessories all as specified or indicated including testing on completionall as specified and directed by Engineer - in - Charge. Note :- Item of earthing includes the cost of 7.5 Mtr long galvanised iron earth 4 mm dia and protection pipe of 15mm dia GI medium grade. Extra lengths if required shall be provided by contractor with out any extra cost to Govt.

S&F in replacment security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge

Excavation in trenches not exceeding 1.5 mtr wide and not ecxceedinf 1.5 mtr depth for laying of cable complete all as specified and directed by Engineer - in - Charge

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm complete all as specified and directed by Engineer - in - Charge

Removal of Excavated material n exceeding 50 mtr and depositing where complete all as specified and directed by Engineer - in - Charge

Supply & filling/ laying a layer of dry coarse sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and directed by Engineer - in - Charge. Note:- After punning drain 18 cm will be measured for payment.

Supply and lay standard size bricks subclass B type complete all as specified and directed by Engineer - in - Charge

Supply, laying, jointing, testing and commissioning in replacement 16 Sqmmx4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/ paths/ drain/culverts or passing through pipes complete all as specified and directed by Engineer - in - Charge

Note : (i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline. (ii) Contractor will furnish the performance warranty certificate along with name of dealer from the manufacturer for a specified period as recmmended by the company for the equipments mentioned against respective items.

Aggarwal brothers and company