Provn of street lights with poles and Repair and Replacement of wiring in Bldg No. P-67 and P-70 under AGE EM-I of GE NORTH MAMUN

Amount

Taking down carefully unsv aluminium point wiring light/fan/socket or power complete and including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc) and removing material from site and making good to the disturbed surface matching with existing specification complete.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLS PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit /existing conduit of appropriate size but not less than 20mm dia with all accessories and FRLS PVC insulated 1.5 Sqmm multi standard unsheathed copper wire for continues earth, with inner, outer frame plates including metal flush shunken boxes with zinc oxide plated suitable size for mounting switches, sockets, fan regulators etc connecting earth dolley with PVC unsheathed flexiblke copper conductor green in color and making good to the disturbed surface of wall/floor and matching with existing specifications for the One light /fan/bell point controlled by one switch.

One 5 pin socket outlet 5 Amps on independent board with separate switch 5 Amp one way.

One 5 pin socket outlet 5 Amps on same board with separate switch 5 Amp one way.Make-

All as per item No 2 above but one light point controlled by two nos of switch of two way point for stair case with 1.5 aqmm PVC insulated copper conductor FRLS type.

All as per item No 2 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.

Supply and Fixing the modular switch piano type flush button single pole 16 Amp one module, front operated (lncl taking down old).

Supply and Fixing the modular socket 2 module 2 in 1, 5/16 pin combimed pin 16 Amp (lncl taking down old).

Supply and Fixing the modular switch piano type flush button single pole 10 Amp one module, front operated (lncl taking down old).

Supply and Fixing the modular socket 2 module 2 in 1,5 pin combimed pin 6 Amp. (lncl taking down old).

Supply and Fixing the modular switch piano type flush button single pole 10 Amp one module, front operated 2 way switch. (lncl taking down old).

S & F Modular type bell push 10 A 1 module, complete all as specified and directed. (lncl taking down old).

Supply and fix bell electric heavy duty Ding Dong type 230 volts single pole complete and all as specified.

S&F ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals. (lncl taking down old).

S&F Lamp holder/angle holder insulated body with back plate for batten fittings. (lncl taking down old).

Supply and fix LED lamp 14 watts 230 volts retfrofit suitable for any type lamp holder as required.

S & F Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 120W- 2 module including necessary connections complete all as specified and directed.

Taking down ceiling fan/Exhaust fan by disconnecting the electric connection and dismantling the blades and removing n from ceiling/roof of bldg by descrewing the nut bolt and all as specified and directed.

Rehanging only of ceiling fan /exhaust fan and connecting up including provision of PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50Sqmm from ceiling rose or connector to fan including minor repairs such as replacement of locking pin, reel insulators, bolts, nuts etc and spraying one coat of synthetic enamel paint of required color all as pewr required and directed by Engr-in-charge.

Supply and fixing the bulk head light fitting LED type 10 watt complete with lamp and having IP-63 protection and fixing on wall/ceiling complete with all accessories and including connecting up with ceiling rose by using PVC insulated and overall sheathed flexible copper conductor cable 3 core 0.50 Sqmm. (lncl taking down old).

S & F in replacement of 20 Watt LED tube light fitting prewired with all accessories and including LED tube rod 20 Watt inlcuding connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50Sqmm. Note : All LED fittings willbe approved from NVBL lab certificate and the certificate for 5 years warrany of product from Auth dealer will be produced while put up the samples for approval from accepting Officer.

Supply and Fixing in replacement wall mounted type fancy light fitting with 9 watt LED bulb and with decorative diffuser and mounting clips and lamp holder, wall mounting arrangment and all as specified and directed. Note : LED fittings willbe approved from NABL lab certificate and the certificate for 5 years warrany of product from Auth dealer will be produced while put up the samples for approval from accepting Officer.

S&F in repair decorative mirror light of toughened glass and having with 1x7 Watt LED, mounting on surface with high output didffuser and 1' length with all accessories connected with twisted flexible copper conductor all as specified and direted. Note : LED fittings willbe approved from NABL lab certificate and the certificate for 5 years warrany of product from Auth dealer will be produced while put up the samples for approval from accepting Officer.

S & F decorative wall mounting bed side light 3 watt fitting LED type having flexible neck all as specified and directed.

Supply and Fixing the surface mounting LED light fitting 12 watt square/round shape with aluminum housing and PMMA diffuser with inbuilt driver and connecting from ceiling rose to fitting by using PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50Sqmm and all as specified and directed. Note : All LED fittings willbe approved from NABL lab certificate and the certificate for 5 years warrany of product from Auth dealer will be produced while put up the samples for approval from accepting Officer.

S & F surface mounted LED with full diffuser of 30/31 watt LED panel with inbuilt driver and connecting from ceiling rose to fitting by using PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50Sqmm Includind all fixing arrangement at required at site and all as specified and directed. Note : All LED fittings willbe approved from NABL lab certificate and the certificate for 5 years warrany of product from Auth dealer will be produced while put up the samples for approval from accepting Officer.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 2+6 way double door open able complete, including taking out old unsv MCB DB any size/type.

S&F in replacement distribution board iron clad, double door with IP-30 protection suitable for TPN as incomer and MCB as outgoing 415 Volts 3 phase 50 C/S '4' way, complete with approriate size copper busbar and neutral link complete with one TPN 4 pole 415 Volts 63 Amps rating with rupturing cap 10 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge (Outgoing MCB will be measured and paid separetly).

S&F 6 to 32 A SP MCB single pole 240 V 10 KA C Series. (lncl taking down old).

S&F 40-63 A SP MCB single pole 240 V 10 KA C Series. (lncl taking down old).

S&F MCB single pole with natural 240 volts 40-63 Amps C series. (lncl taking down old).

M&L for sub main wiring in replacement with FR PVC insulate sheathed 2 x 6 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into PVC concealed conduit with 6.0 sqmm PVC insulated green copper cable for continues earth PVC pipe not less than 20 mm dia with all accessories complete including the taking down old u/s submain wiring of any descreption and all as specified and directed.

S & F sheet metal enclosures with single pole and neutral enclosure with two pin and earth plug and socket complete with one MCB 20 A 240V. (lncl taking down old).

M&L replacement for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion.

Supply, laying, jointing and testing of 25 Sqmm 4 core XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches/pipes, fixed to poles/walls complete all as directed incl taking out the old burnt out cables all as directed.

Excavating in trenches in soft / loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation of poles, trenches for laying of cable, or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Returning filling with earth obtained from excavation including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as directed.

Removing surplus soil to a distance not exceeding 50m and depositing at a level not exceeding 1.5m above the starting point complete all as directed.

M & L for sand filling in trenches dry and and clean sand unwashed including punning around cable for protection of under ground cable complete all as specified and directed.

M & L for well burned bricks, laid flat (old size) sub class B designation 75 for cable protection copmplete all as specifed and directed.

M/L replacement for tube, light grade galvanised with all fittings laid in trenches/through wall / under road or floor of 40mm bore.

Excavation in trenches in Soft / loose soil n. exc. 1.5 Mtr in width and exc. 1.5 Mtr but not exc. 3.00 Mtr In depth and getting out all as required for laying of cable/ poles.

Material and Labour for pre cast cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregrate for foundation pole, stay wire etc filling as mass concrete including necessary form work complete all as specified.

Material and Labour for pre cast cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregrate for coping of poles and foundation of stay complete all as specified.

Material and labour for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint.

Material and labour for erection of steel tubular swaged pole 9 mtr long with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP 31, including painting with anti corrosive paint internally complete and externally up to planting depth, alternative green & white strips of 30 cm height upto 1.5 mtr above ground level all as required at site or directed by Engr-in-charge.

Supply and fixing LED street light fitting 60 Watts, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening, seperate driver compartment with IP66 protection and impact resistance of IK07 complete making connection with street light box or OH line using PVC insulated and sheathed single core multi stranded aluminium coductor cable of size 1.5 Sqmm all as directed by Engr - in - Charge. including GI Bracket 1.2m legnth GI tubing medium grade 40mm bore with fittings laid for protection of cable under road crossing fixed to walls or pole complete all as specified and as directed. (clamps for fixing pipe, nuts, bolts washers shall be measured separately).

Supply, installation, connecting electrically and testing of street light junction box, pole mounted made out of CRCA sheet 2mm thick, powder coated having door with magnetic lock complete with bus bar 4 Nos suitable for 3 phase 4 wire supply system, made of alumn strip of size 20X3mm, two single pole 240 volts 'C' Curve type 6 Amps with rupturing cap 10 KA, including fixing arrangement made of MS Clamps of requisite size nuts, bolts and washers complete all as required at site or directed. (Cables enteries should be through proper metallic cable gland.)

Supply, laying, testing and commissioning of LT cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core.

Material and labour for GI tubing medium grade 40mm bore with fittings laid for protection of cable under road crossing fixed to walls or pole complete all as specified and as directed. (clamps for fixing pipe, nuts, bolts washers shall be measured separately)

M&L for earthing with GI earth plate electrode of size 60x60cmx6mm thick buried directly in ground to a depth not less than 2.25m deep below normal ground level with top edge of the earth plate not less than 1.5m deep below normal ground level connected to GI Wire of size 4mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full lenght of earth plate, 40mm dia GI tubing light grade protection pipe upto test point 20mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30X30cm made of RCC 1:3:6 with suitable handle, angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate and filling of vegetable soil to the remaining 10%, removal of surplus soil and returning filling in all as required at site including test point made out of steel plate of size 75x75x6mm fixed to wall all as specified in plate No 3 of SSR Part-I and directed by Engr-In-Charge.

M/S Vijay Punj Constructions

M/S BHATIA CONSTRUCTION

Ashoka Engineers

KULBHUSHAN AGGARWAL