UPGRADATION AND EXTENSION OF EXISTING COOK HOUSE AT ARTY CENTRE, NASIK ROAD CAMP

Surface excavation n.exc 30cm deep and averaging 15 cm deep & getting out in soft/loose soil

Removing of surplus excavated material to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Excavation in post holes (or similar holes) each not exc 0.50 m getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surfaces in soft/loose soil complete all as specified and as directed

Excavating in trenches, n.exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out hard/dense soil complete all as specified and as directed.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out Soft/disintegrated rock complete all as specified and as directed.

Excavating in trenches, n.exc 1.5 m wide and exc 1.5 m to n.exc 3.00 in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and getting out hard/dense soil complete all as specified and as directed.

Removing excavated material to a distance exc. 250 m but n.exc. 500 m and depositing where directed

Excavation over area not exc 1.5 mtr deep for foundation and getting out any types of soil complete all as specified and as directed.

Add to items no. 07 for each additional 1.5m or part thereof in depth beyond the first 1.5 m for foundation and getting outt Soft/disintegrated rock complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Grubbing up tree trunk, girth exc 30 cm n.exc 100 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n.exc. 50 m and clearing site complete all as specified and as directed

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (Below or above ground level) un-reinforced complete all as specified and directed.

M & L for Cement concrete 1:4:8, type D2, using 40mm graded stone aggregates as in foundation, lean concrete complete all as specified and as directed.

M&L PCC 1:3:6, type C2, using 40 mm graded stone aggregate Cement concrete as in foundations, filling and mass concrete complete all as specified and as directed

M&L for PCC 1:2:4, type B2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and directed.

M&L for Brick works with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specifed and directed

M&L For 20 cm thick masanory with AAC block straight or curved in plan exc. 6 m mean radius built in jointing Adhesive manufactured by same AAC Block manufacturer complete all as specified and as directed.

M/L 10 cm thick AAC Block masanory straight or curved on plan exc 6m mean radius built in jointing adhesive manufactured by same AAC Block manufacturer complete all as specified and as directed.

M&L for damp proof course 20 mm thick in cm (1:2) mixed with integral water proofing compound over a coat of blown bitumen of 1.5 kg per sqm blended with clean sand @ 0.05 cum per sqm complete all as specified and as directed.

M&L for Rendering in 10 mm thick Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on brick work or concrete surfaces etc finished surfaces even and smooth complete all as specifed and directed.

M&L for 5 mm thick Ready mix cement plaster in ceiling finished smooth using thin layer of sagol complete all as specified and as directed

M&L for Rendering in 12mm thick Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on brick work or concrete surfaces etc finished surfaces even and smooth complete all as specifed and directed.

M&L rendering 10 mm thick cement mortar on other than fair faces of brick work in CM 1:4 finished even and fair with out using extra cement complete all as specified and as directed

M & L for moorum/red bajri filling in floors or pavings, laid in double layers n.exc. 15 cm thick each, spread, levelled and rammed including watering complete all as specified and as directed.

M & L for hardcore of gauge n.exc 63mm deposited, spread in double layers n.exc 15 cm thick, watered and well rammed to a true surface complete all as specified and as directed.

M & L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in sub base floor finised etc complete all as specified and as directed.

M & L for 40 mm thick Cement concrete type B-0,1:2:4 (12.5 mm graded aggregate) as in as in levelling course (sub base) to flooring finised etc complete all as specified and as directed.

M & L for mild steel TMT bars 10mm dia and over cut to length bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to IS complete all as specified and as directed. Make: Tata tiscon, JSW Neosteel, SAIL

M & L for mild steel TMT bars 6 to 8 mm dia in stirupps, spacers and binders complete all as specified and as directed. Make: Tata tiscon, JSW Neosteel, SAIL

M & L for Advanced Interior Emulsion Paint- Teflon surface protector, Superior stain-resistant, Enhanced anti-microbial, Exceptional crack-bridging premium interior emulsion apply on concrete /brick new plastered surfaces, (dry time before painting after the 28 days minimum curing) on wall/ ceiling surface having a long-lasting 8-years warranty periods, 100% washable, Unmatched Flame Spread Resistance, Environmentally Responsible. This warranty shall cover the durability and performance of the paint. Application of Advanced Interior Emulsion Paint shall be as per the below-given steps to get beautiful walls/ceiling with the smoothest finish: Step 1 : Cleaning of plastered surface free from dust, loose particles, grease or laitance and to ensure that the wall is dry and cured before starting work. Step 2 : Apply Wall Base Coat Primer (Interior) in one coat with brush/ roller with a coverage for 8-10 sqm per litre per coat and allowing 6-8 hours drying time before the next coat.

Step 3 : Applying Acrylic Wall Putty in two coat (1.5 mm thickness per coat) and coverage for 18-20 sqm per 20 kg bag, using a putty blade, to allow each coat to dry for 4-6 hours, sand the surface with emery papper to obtain a smooth and even finish. Step 4 : Applying Base Coat Primer (interior) in second coat with brush/roller and coverage for 8-10 sqm per litre per coat, allow 6-8 hours drying time before the next coat. Step 5 : Applying Premimum Interior Emulsion in two coats on wall/ceiling surface using roller/brush,maintain proper dilution (as per manufacturer's instructions, coverage 22-24 sqm per litre first coat, 11-13 sqm per litre second coat on smooth wall, usually 40-50% with clean water, ensure minimum 4-6 hours drying time between coats, final finish should be smooth, silky sheen, high washability, crack-bridging film, rich and uniform with desired shade all as specified and directed by Engr-in-charge. steps 2 to 5 shall be of same approved make. Note:-The above task shall be carried out by deploying a skilled worker painter is a professional trained to prepare surfaces,apply paint and finishes to res-idential and commercial properties,possessing expertise in dif-ferent painting styles,techniques,and safety procedures.

M & L Advanced exterior emulsion paint - Top coat - apply two coat and also over a coat of Exterior wall primer premium exterior wall/ceiling surface finish with advanced protection 100% Acrylic emulsion (Water-based) and exterior luxury paint that comes with '12 years of performance warranty periods, smooth/rich sheen finish, Dirt pick-up/algae & fungal resistance, crack bridging ability (elastic film), excellent water repellency & UV protection complete all specified and directed by Engr-in-charge. approved make. Note :-The above task shall be carried out by deploying a skilled worker painter is a professional trained to prepare surfaces,apply paint and finishes to res-idential and commercial properties,possessing expertise in dif-ferent painting styles,techniques,and safety procedures.

M & L for reinforced cement concrete design mix M-25 (20 mm graded stone aggregates) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

M & L for reinforced cement concrete design mix M-25 (20 mm graded stone aggregates) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.

M & L for reinforced cement concrete design mix M-25 (20 mm graded stone aggregates) as in chajjas all as specified and as directed.

M & L for reinforced cement concrete design mix M-25 (20 mm graded stone aggregates) for Beams, cantilevers, bressumm ers, lintels over 1.5m span all as specified and as directed.

M & L for reinforced cement concrete design mix M-25 (20 mm graded stone aggregates) as in Columns, pillars, piers, posts and struts all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) with rough finished surfaces complete all as specified and as directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs also splays between floors and beams complete all as specified and as directed.

Use and waste of formwork to side of concrete foundation, plinth beams, bases of columns, sides of columns for rough finished surfaces of concrete complete all as specified and as directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finishes surfaces of concrete complete all as specified and as directed.

Use and waste of form work to edges of concrete flat horizontal or sloping and similar work exceeding 10 cm but not exceeding 20 cm wide for rough finished surfaces complete all as specified and as directed.

Use and waste of Formwork to sides of square, rectangular and polygoal pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and as directed.

S&F for Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

M & L for Mild Steel work as in plates (plain or chequred) channels, square cut or notched with fabriction and erection of FE 410-W (Gde E-250) qauality A (ordinary and counter sunk) forming holes without any attachment complete all as specified and as directed.

M & L for pre-painted galvalume aluminium zinc coating GI based corrugated/ semi corrugated of approved profile steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specfied and as directed.

S & F pre-painted galvalume aluminium zinc coating AZ-150 grade GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specfied and as directed. (Make - JSW Colouron + or Tata)

M & L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

M & L for 20-25 mm thick Rough shahabad stone slab as in flooring/Plinth protection over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in CM 1:4 complete all as specified and directed.

M & L for full-body Vitrified Tiles(glossy/matt) finished of size 600x600x10-12mm ,600x1200x10-12 mm coloured finished (square/ rectangular) as in floors and including 15 mm thick screed bed in CM 1:6 ,set and jointed in fill up EPOXY TILE GROUT(makes-Asian paints) to match over all specified and directed by Engr-in-charge. Make:Kajaria/Somany/Johnson marbonite/Orientbell

M & L for full-body Vitrified Tiles (glossy/matt) finished of size 600x600x10-12mm, 600x1200x10-12 mm coloured finished (square/ rectangular) as in in riser of steps, skirting, dado and including 15 mm thick backing coat in CM 1:6, set and jointed in fill up EPOXY TILE GROUT to match over all as specified and directed by Engr-in-charge. Make: Kajaria/Somany/Johnson marbonite

M & L for Colour Glazed ceramic joint free tiles in vertical surface 350 x 250 x 7mm / 450 X 350 X 7mm thick, laid over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed. Make : Kajaria/Somany/Johnson marbonite

S & F Powder coated aluminium sliding window frames with movable shutters (powder coating of 50 micron, sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and including 4.80 mm thick figured glass & stainless wire mesh fixed with neoprene rubber gasket with aluminium beading, clips, frame made with aluminium section as appended below- (i) Window frame 92x38 mm x2.00mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 20mmx39mmx2.00mm thick and over. (iii) Aluminium beading - 0.7 mm thick. (iv) Stainless steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or along with F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such as aluminium suitable handle with auto interlock cap with suitable size. (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed by Engr-in-charge. Note : Rate for glass and wire shall deemed to be included in the quoted rates

S & F 12mm thickness Toughened glass door (Double shutter), glass panel clear glass /frosted/Etched design/ tinted and edge polished, bevelled(safety finish), design with horizontal etching/stripes (as in image), door size (standard height : 2100mm-2400mm and standard width : 750mm-900mm per shutter and all hardware fitting (ss brushed finish, chrome finish, matte black premium look) stainless steel handle (304 grade) types : D-Types /H -Types pull handles (300mm-1200mm), Hinges/Patch Fittings : Standard-duty/premium floor spring (must be embedded in floor minimum 65-70mm depth and weight for 100-120 kg)/ hydraulic patch fittings, Top patch fitting (stainless steel clamp for fixing glass), Bottom patch fitting (with pivot to floor spring), Locking system (floor-mounted lock or centre lock optional, key/knob operation), top pivot fitting fixed to RCC beam/strong support above, clear opening space (ensure proper alignment for smooth operation), gap allowance (3-5mm between door and floor/walls) and complete Installation all as specified and as directed by Engr-in-charge. Glass Makes : Ozone,Dorma,Godrej,Ebco

S&F vitreous china Wash Basin CALIBRE 580 X430 X200 mm with full pedestal height 790 mm for snow white including stainless steel bottle trap and 40 mm dia GI pipe up to Floor trap all specified and directed by Engr-in-charge. Make : Cat Part No S2040109 wash basin & S2090101, F8060406 pedestal of Cera,

S&F brass chromium plated SS single towel rail 600mm long Cat Part No. CPA-1111 of Jaquar or or equivalent in kohler, grohe and Roca and all specified and directed by Engr-in-charge.

S & F Glass shelf 600 mm long with bracket complete all as specified and directed by Engr-in-charge. Make:Jaquar(cat part No:AKP-35771P)specified and directed

S & F PVC Connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S and F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joint and fixing adhessive with all fittings, including all fixed to walls complete all as specified and as directed.

S and F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors with all fittings complete all as specified and as directed.

S and F 110mm bore PVC (SWR) bends complete all as specified and as directed.

S and F 75mm bore PVC (SWR) bends complete all as specified and as directed.

S and F 110mm bore PVC (SWR) junction single-Tee (equal or unequal) with access door complete all as specified and as directed.

S and F 75mm bore PVC (SWR) junction single-Tee (equal or unequal) with access door complete all as specified and as directed.

S&F Framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed by Engr-in-charge

M & L for appying three coat of white wash on on walls including preparation all as specified and as directed.

S&F for painting with two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces exc 10 cm in width or girth including preparation surfaces all as specified and directed by EIC.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide primer n.exc 10cm girth or width complete all as specified and as directed.

S & F rotational moulded three layers polyethylene water storage tank capacity 2000 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S & F 20mm bore ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

S & F 20mm bore Gun metal gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S & F 15mm bore steel tube medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F 20mm bore steel tube medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F 25mm bore steel tube medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F bib taps, cast copper alloy 15mm bore, screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engr-in-charge. (Cat No. Cera QT F2006151 or equivalent in kohler, grohe and Roca )

S&F 15mm dia brass chromium plated two way bib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as directed by Engr-in-charge. Make Jaguar Cat Part No: FLR 5041 N or equivalent in kohler, grohe and Roca .

S & F 15 mm size chromium plated swan neck type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as directed by Engr-in-charge. Make Cera Cat No F2014104 or equivalent in kohler, grohe and Roca .

S & F Angular stop cock with wall flange complete all as specified and as directed. Make : Jaquar (cat part No:CON-059KN) / Hindware (cat part No: F200005FT) / kohler (cat part No:k-80154IN-4AV-CP)

S & F for Chrome plated brass Sink cock 15 mm dia wall mounted with wall flange and 150 mm (6'') long swivel spout all as directed by Engr-in-charge. Make :- cat no F1023251 Cera.

S & F PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F CP soap dish complete all as specified and as directed by Engr-in-Charge. Make Jaquar Code No- AKP -35731 P or equivalent in kohler, grohe and Roca

M & L for Precast factory made PCC interocking Paver block, M-30 grade, 60 mm thick of shape & size as per IS : 15658 using grey cement and no pigment or white cement with pigment bedded with 50 mm thick sand cushion (laid uniformly to line and level) over 75mm thick PCC (1:3:6) and 150 mm thick hardcore and 300 mm thick moorum filling over compacted subgrade over rammed earth complete all as specified and as directed by Engineer-in-charge.

M & L machine cut cudappa stone slab 20-25 mm thick in basin partion and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite complete all as specified and as directed.

M & L for Screed bed or bedding layer of cement mortar 20 mm thick for laying floor finishes in cement mortar 1:6 complete all as specifed and directed

Rounding to edges of stone slabs, one side edge such as in steps cooking platform and other similar work complete all as specified and as directed.

Supply only liquid water proofing.

Water proofing on roof including flashing and junction of parapet, kerb, wall etc. As under (a) M&L for 10mm thick plastering (screeding) in cement mortar 1:3 on concrete roof surfaces finished even and smooth without using extra cement and using Water Proofing Compound. Note : Water Proofing Compound shall be paid seperately. (b) Applying oil based bituminous primer on cleaned and dried surface @ 0.2 kg/sqm. (c) Laying by thermo fusion (torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.6kg/sqm and reinforcement with polyester non woven fabric ( not less than 150 gms/sqm) (d) Painting the exposed APP membrane surface with bituminous aluminium paint @ 0.15kg/sqm (Note: ser no. (a), (b) & (c) shall be of same approved make)

M&L for Treating the top surface of filled earth at the rate of 5 litres of chemical emulsion (Antitermite Treatment ) per square metre of surface as per SSR 3.26 part I as specfied and as directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete as per SSR 3.31 part I as specfied and as directed.

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of chemical emulsion (Antitermite Treatment ) per metre of the perimeter wall complete as per SSR 3.30 part I as specfied and as directed.

S&F 800mmx600mm 5 mm thick Glass Mirror with double coat for protection and longevity, 5mm clear glass shelf with stainless steel rail and silver plating on the back for better reflection all as specified and directed by Engr in charge.

S & F Double bowl Sinks manufactured from 1.0 mm thick 304 grade stainless steel size 1016 x 508 mm (40'' x 20'') depth : 203 mm (8'') installation top mount with outlet connection pipe for double bowl sink with overflow and including square strainer 110 x110 mm all as directed by Engr-in-charge. Make :- Cat no B4513123-Gloss finish only, for outlet connection B4724501, B4724502, B4724503, B4811502, for strainer B4811513 (304 grade) of Cera.

S&F for high density polyethylene pipes of Bore 50 mm of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and as directed.

M & L for Zebra indoor roller blind colours made from HDPE sunblock mesh-dual-layered for light control, trendy striped styling smooth manual chain lift with customizable left/right control (manual) and complete Installation including all fitting and accessories as specified and as directed by Engr-in-charge.

Supply and fixing Pipe Supporting Clamping for Single Pipe of dia 20 mm (3/4") down take pipeline with Clamping System consists of Mono Bracket + U Bolt Rubber Sleeve mounted system running vertically with wall distance 100 mm (4"): Pipe Support Clamping made of: 1. Mono Bracket for 20 mm (3/4") pipe having Wall Distance 100 mm (4") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 48 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs. 2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set - Zn Al Flake coated. Hot dip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty for one unit: 1. Mono Bracket for 20 mm (3/4") pipe, Wall distance 75 mm (3") - 1 Nos. 2. U Bolt Rubber Sleeve mounted for 20 mm (3/4") GI / UPVC/ CPVC pipe Dia. - 1 nos and 3. Fixing Nail Zn coated of thickness 6.5 mM & Length 63 mm (2 1/2") - 2 nos. Fixing Details : Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Pune Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : CEPZ/2023/TD/03 and CEPZ/2024/01. Make : Shaivi or equivalent as approved by GE.

Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multi-stranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with modular cover plate with frame of adequate required modules for one light or one fan point controlled by one switch including 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for the following:- Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

(a) One light/ fan point controlled by one, one way switch.

(b) One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

(c) All as per ser item No. 96.01 here in before but on independent board.

(d) All as per ser item No. 96.01 herein before but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.

Supply and fixing of switch modular type 6 Amps one way, 1 module, AC 230 Volts, shrouded terminal, ISI marked complete all as specified and directed.

Supply and fixing of modular type socket 6 Amps 3 pin round socket with child safety shutter (ISI marke), AC 230 Volts, shrouded terminals, smooth plug removal and insertion complete all as specified and directed.

Supply and fixing of switch modular type 16 Amps one way, 1 module, AC 230 Volts, LED based indicator, shrouded terminal, ISI marked complete all as specified and directed.

Supply and fixing of modular type socket 6 Amps/ 16 Amp 3 pin socket with child safety shutter (ISI marke), AC 230 Volts, shrouded terminals, smooth plug removal and insertion complete all as specified and directed.

Supply and fix ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish. Make - Havells /Anchor / Legrand.

Supply and fixing of modular type fan 8 step regulator, 100 watt, AC 230 Volts, 2 module, laser marking complete all as specified and directed.

Supply and fixing of LED round shape 15 watt 220 volts AC surface mounted type with high efficacy PMMA diffuser soft glare free light complete with drivers, clamps and suitable size as per ground requirement complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixinf LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, IP 20 with battery backup and tri-colour CCT with remote control, epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing 35 Watt LED street light fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with bracket of adequate size complete IP66 protection and impact resistance of IK08.E68, including connecting up with 2/3 core flexible copper conductor cable, compete all as specified and directed by Engr-in-Charge.

Supply and fixing of LED round hanging pendant light white colour, suitable for bar counter of capacity 40 Watt complete with connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.

Supply & fixing brushless direct current (BLDC) ceiling fan 1200 mm sweep (ISI Marked), with super enamelled copper wire, white color, Class of insulation "B", 5 Star rated, ISI marked, rated voltage 230Volt AC, 50 Hz , Rated power 26 Watt (+/-) 10%, Rated speed 350 RPM (+/-) 10%, power factor 0.9 at 5th speed, Air delivery 210 Cum/min (CMM), operating temp 75 degree max, 3 nos aluminium blades and thickness 1.1 mm (after painting), Double ball bearing, speed control through regualator, Low voltage starting i.e. 185 Volt minimum, Insulation, resistance more than 2 mega ohM & Leakage current 210 MICRO Amps Max including connecting rod as per existing length, writing MES Nos on ceiling fans complete all specified and directed by Engr-in-Charge. Make : Havells, Model No. PRO-26 or equivalent in /Bajaj/Crompton

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 volts, 50 Hz RPM 1200, copper winding, 300 mm sweep complete and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing sheet metal enclosures with plug & socket triple pole and earth enclosure with three pin and earth plug with socket, 415 volts complete with one MCB of 32 Amps (TP) complete all as specified. Make- L&T/ ABB/ Legrand/ Schenider.

Supply and fixing of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100 Volts grade, FRLS type, cables 16 Sqmm drawn through in and including PVC heavy duty concealed conduit including 16 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Supply and fixing of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100 Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty concealed conduit including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note for item Srl No 111 & 112 :- (i) Four runs of cables and one run of earthing cable and PVC conduit will be measured as one length. (ii) PVC conduit and its accessories shall deemed to be included in the quoted rates. (iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.

Supply and fixing of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100 Volts grade, FRLS type cables, 4 Sqmm drawn through and including PVC heavy duty concealed conduit including 4 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Supply and fixing of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100 Volts grade, FRLS type, cables 2.5 Sqmm drawn through in and including PVC heavy duty concealed conduit including 2.5 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note for item Srl No 113 & 114 :- (i) Two runs of cables and one run of earthing cable and PVC conduit will be measured as one length. (ii) PVC conduit and its accessories shall deemed to be included in the quoted rates. (iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.

Supply and fixing distribution board, sheet metal enlosure double door shutter type, factory made, fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N, 4 ways all as specified & directed.

Supply and fixing distribution board sheet metal enlosure double door shutter type, factory made, fixed flush with wall or outside on wall surface, suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N, 8 ways all as specified & directed. Make - Hager CP No VYS08D or Legrand/ ABB.

Supply and fixing MCB FP 63 Amp, 415 Volts, 50 Hz with 10 KA. Make - Hager of CP No NBN463N or Legrand /ABB.

Supply and fixing MCB DP/SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA. Make - Hager CP No NBN232N or Legrand/ ABB.

Supply and fixing MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA. Make - Hager CP No NBN132N or Legrand/ ABB.

Material & Labour Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and including galvanised earth lead wire of 4.00 mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6 mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

Note :- Schedule of Credit of Amount Rs NIL shall be deducted from total amount.