8343/E8

Amount

Taking down carefully any type of point wiring (light, fan, bell, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets ( excluding light fittings) etc stacking at site for reuse of serviceable items and removal of unserviceable items from site and making good disturbed faces of walls, ceiling, floor etc to match with the existing surface complete all as specified and directed by the Engineer-in-charge.

Material and labour Point wiring with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 Sqmm size, 1100 volts grade cable confroming to IS - 694 1990 drawn through and including PVC casing and caping of suitable size with all accessories including fabricated Galvanise Iron terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 Sqmm multistranded PVC insulated , FRLS type unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light / fan / bell point / 3 pin 5 Amps Switch Socket outlet independent point controlled by one switch single pole one way complete all as specified and as directed.

All as per item No. 2.00 here in-before but for one 3 pin 5 amps socket outlet on the same board with other switch with casing caping / PVC conduit complete all as specified and directed by Engineer in-charge.

All as per item No. 2.00 here-in-before but using 2.5 Sqmm size stranded copper conductor FR grade for one 16 Amp switch socket outlet point on independent board complete all as specified and directed by Engineer-in-Charge.

Material and Labour concealed Point wiring with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core, unsheathed, copper conductor cables drawn through and including PVC conduits , ISI marked, 20mm dia, medium grade with all fittings and accessories of PVC conduits (like Tee, bend etc.) complete fixed to walls/ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, multistranded, single core, copper cable green in colour as in earth continuity wire connecting to common earth point and 1.6 mm thick galvanised iron sunken terminal boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point/ 3 pin 5 Amps socket outlet independent point controlled by one, one way switches complete including cutting, chasing the surface and then making good the same in CM 1:3 complete all as specified and directed by the Engr-in-Charge.

All as per item No. 5.00 here in-before but for one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer in-charge.

All as per item No 5.00 here-in-before but using 2.5 Sqmm size stranded copper conductor FR grade for one 16 amp switch socket outlet on independent board complete all as specified and directed by Engineer-in-Charge.

Material and Labour Concealed Point wiring with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core, unsheathed, copper conductor cables drawn through and including PVC conduits Concealed in walls, ceiling etc with all fittings and accessories (like Tee, bend etc.) of PVC conduits 20mm dia, medium grade complete fixed to walls/ceiling etc for modular switches / sockets with and including 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, multistranded, single core, copper cable green in colour as in earth continuity wire connecting to common earth point and 1.6 mm thick mild steel sunken terminal boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point/ 3 pin 5 Amps socket outlet independent point controlled by one, one way switches complete including cutting, chasing the surface and then making good the same in CM 1:3 complete all as specified and directed by the Engr-in-Charge.

All as per item No. 8.00 here in-before but for one 3 pin 5 amps modular socket outlet on the same board with other switch complete all as specified and directed by Engineer in-charge.

All as per item No 8.00 here-in-before but using 2.5 sq mm size stranded copper conductor cable for one modular 16 amp switch socket outlet on independent board complete all as specified and directed by Engineer-in-Charge.

Supply & fix Switch piano, flush type, SP, one way, 5/6 Amps 230 Volts complete all as specified and as directed.

Supply & fix in repairs Switch piano, flush type, SP, one way, 5/6 Amps 230 Volts, including unscrewing the bakelite sheet of switch board and refixing the bakelite sheet after replacing the piano switch complete all as specified and as directed.

Supply & fix Bell/buzzer push 5/6 Amps, flush type, white/ivory finish complete all as specified and as directed.

Supply and fix Switch socket combination multipurpose 2 in 1, 3 pin 6 Amps 230 volt flush type complete all as specified and as directed.

Supply and fix in repairs Switch socket combination multipurpose 2 in 1, 5 pin 6 Amps 230 volt flush type including unscrewing the bakelite sheet of switch board and refixing the bakelite sheet after replacing the switch socket combination complete all as specified and as directed.

Supply and fix Socket outlet 5 pin, 6 Amps, 230 volt flush type complete all as specified and as directed.

Supply and fix in repairs Socket outlet 5 pin, 6 Amps, 230 volt flush type including unscrewing the bakelite sheet of switch board and refixing the bakelite sheet after replacing the socket outlet complete all as specified and as directed.

Supply and fix Switch socket combination multipurpose 2 in 1, 5 pin 5 & 15 Amps 230 volt flush type complete all as specified and as directed.

Supply and fix in repairs Switch socket combination multipurpose 2 in 1, 5 pin 5 & 15 Amps 230 volt flush type including unscrewing the bakelite sheet of switch board and refixing the bakelite sheet after replacing the Switch socket combination complete all as specified and as directed.

Supply and fixing Lamp holder suitable for batten fittings complete all as specified and directed by the Engr-in-Charge.

Supply and fixing in repairs Lamp holder suitable for batten fittings complete all as specified and directed by the Engr-in-Charge.

Supply and fix Ceiling rose surface Bakelite three terminals 230 volts complete all as specified and as directed.

Supply and fix in repairs Ceiling rose surface Bakelite three terminals 230 volts complete all as specified and as directed.

Supply and fix Call bell ding dong AC 230 volts, single pole complete all as specified and as directed.

Supply and fix in repsairs Call bell ding dong AC 230 volts, single pole complete all as specified and as directed.

Supply & fix Electronics fan regulator, step type, AC 120/280 volt, white/ivory finish complete all as specified and as directed.

Supply & fix in reapairs Electronics fan regulator, step type, AC 120/280 volt, white/ivory finish including unscrewing the bakelite sheet of switch board and refixing the bakelite sheet after replacing the Electronics fan regulator complete all as specified and as directed.

Supply & fix Modular type switch 6 Amps 230V AC single module one way complete all as specified and as directed.

Supply & fix Modular type Switch socket combination 3 pin 5 Amps, 230 Volts complete all as specified and as directed.

Supply & fix Modular socket outlet 6 Amps 3 Pin shuttered type 230V AC 2 module complete all as specified and as directed.

Supply & fix Modular Switch socket combination 5 pin, 5/15 Amps, 240 Volts shuttered type complete all as specified and as directed.

Supply & fix Modular electronics step type fan regulator step type 230/ 240 Volts mplete all as specified and as directed.

Supply & fix modular cover plate with frame for fixing of modular switches/sockets complete for 2 modules complete all as specified and as directed.

All as per item No 32.00 here-in-before but for 3 modules.

All as per item No 32.00 here-in-before but for 4 modules.

All as per item No 32.00 here-in-before but for 6 modules.

All as per item No 32.00 here-in-before but for 8 modules.

Supply & fix Sunken flush metal GI boxes for fixing of modular switches/sockets flush to the walls 2 Modules complete for modules complete all as specified and as directed.

All as per item No 37.00 here-in-before but for 3 modules.

All as per item No 37.00 here-in-before but for 4 modules.

All as per item No 37.00 here-in-before but for 6 modules.

All as per item No 37.00 here-in-before but for 8 modules.

Supply and fixing Recess mounted LED luminaries 36 watt , 2'x2', premium commercial luminarie and making connection with PVC cable of 0.50 sq mm three core sheatered not more than 0.5 meter in lenght including taking down old unserviceable recess light fittings complete all as specified and as directed. Make:- Crompton cat part No. LCTLRNE-36-FO-WW or Make:- Bajaj Cat part No. BZRSQL 36W GZi NW or Make:- Surya cat part No. SLE FP 36 R22.

Supply and fixing LED Downlight 9 /10/12 watt with all accessories and making connection with PVC cable of 0.50 sq mm three core sheatered not more than 0.5 meter in lenght including taking down old unserviceable recess light fittings complete all as specified and as directed. Make:- Crompton cat part no. CDR-211-09-30-SL-NWH or make:- Havells Cat Part No. SPIRITLAMPUNITDLR10WLED827MOD24D or Surya cat part No. SLE DLR 12W STELLAR PRIME XX.

Supply and fix AC starter unit consisting of one 25 Amp capacity starter, one 240 V 20 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top prewired complete all as specified and as directed including taking down old unserviceable starter unit. Make:- North West / Anchor / ABB / Legrand.

Supply and fix Plug and socket in sheet metal enclosures with two pin and socket complete with and MCB SP 20 Amps 240 Volts heavy duty including taking down old unserviceable one complete all as specified and as directed. Make:- ABB / Legrand/ Schneider/ Siemens.

Supply and fix Sheet metal enclosure Metal Door for DB's where MCBs to be used 4 way single pole and neutral with 200 amps rated bus bar including taking down old unserviceable DB complete all as specified and as directed. Make:- L&T/ Schneider/ ABB/ Siemens/C&S Note:- (1) Quoted rates are inclusive of taking down DB including MCBs. (2) Found Unserviceable MCBs will be contractor property and will be measured under Schedule of Credit. (3) Found Serviceable MCBs will be taken into safe custody for reuse under relevent item of this Schedule.

Supply and fix Sheet metal enclosure Metal Door for DB's where MCBs to be used 8 way single pole and neutral with 200 amps rated bus bar including taking down old unserviceable DB complete all as specified and as directed. Make:- L&T/ Schneider/ ABB / Siemes/C&S Note:- (1) Quoted rates are inclusive of taking down DB including MCBs. (2) Found Unserviceable MCBs will be contractor property and will be measured under Schedule of Credit. (3) Found Serviceable MCBs will be taken into safe custody for reuse under relevent item of this Schedule.

Supply and fixing MCB DB Metal Door TPN 4 way including bus bar neutral link, earth bar and din rail, recessed with wall surfaces and making good surfaces of wall including taking down old unserviceable DB all as specified and directed by the Engr-in-Charge. Make:L&T/ Siemens/ Schneider/ ABB/C&S Note:- (1) Quoted rates are inclusive of taking down DB including MCBs. (2) Found Unserviceable MCBs will be contractor property and will be measured under Schedule of Credit. (3) Found Serviceable MCBs will be taken into safe custody for reuse under relevent item of this Schedule.

Supply and fixing MCCB DB, Vertical TPN, 6 way, metal door, conforms to IS 8623-1&3, IK 09, made of CRCA sheet steel, RAL 9003, powder coated, provided with insulated vertical phase neutral bus bars, with earth bars, sticking saddles complete including taking out old unservicaeble one complete all as specified and directed by the Engr-in-Charge. Make:- L&T/ Schneider/ Siemens/ ABB/C&S Note:- (1) Quoted rates are inclusive of taking down DB including MCCBs. (2) Found Unserviceable MCCBs will be contractor property and will be measured under Schedule of Credit.

Supply and fix MCB 6 to 32 Amps, SP, 240 Volts , 'C' curve braking capacity 10 kA as directed by the Engr-in-Charge. Make:- L&T/ Schneider/ siemens/ ABB/C&S

Supply and fix MCB , 63 Amps, DP, 240 Volts , 'C' curve breaking capacity 10 KA as directed by the Engr-in-Charge. Make:-L&T/ Schneider/ siemens/ ABB/C&S

Fixing only MCB of any capacity and any no of pole. Note:- Old serviceable MCB obtained from taking down of DB shall be reused.

Supply and fix Isolator 63 amps, 415 Volts, four pole including taking down old unserviceable one as directed by the Engr-in-Charge. Make:-L&T/ Schneider/ siemens/ ABB/C&S

Supply and fix in repairs MCB 6 to 32 Amps, SP, 240 Volts , 'C' curve braking capacity 10 kA as directed by the Engr-in-Charge. Make:- L&T/ Schneider/ siemens/ ABB/C&S

Supply and fix in repairs MCB , 63 Amps, DP, 240 Volts , 'C' curve breaking capacity 10 KA as directed by the Engr-in-Charge. Make:-L&T/ Schneider/ siemens/ ABB/C&S

Supply and fix in repairs Isolator 63 amps, 415 Volts, four pole including taking down old unserviceable one as directed by the Engr-in-Charge. Make:-L&T/ Schneider/ siemens/ ABB/C&S

Supply and fix 25mm external dia, medum grade, ISI marked Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed.

Supply and fix 32mm external dia, medum grade, ISI marked Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed.

Materials and labour Sub main wiring with 2 runs of single core PVC insulated FRLS unsheathed stranded copper conductor of size 4 Sqmm and one run of PVC insulated FRLS unsheathed multistrand copper conductor of size 4 Sqmm FRLS type as earth lead drawn in and including PVC Conduit, medium grade, ISI marked including all fittings and taking out old unserviceable sub main wring including PVC casing caping complete all as specified and as directed. Note:- Two runs of 4 Sqmm conductor as main and one run of 4 Sqmm conductor for earthing conductor with one run of PVC casing caping shall be measured as one unit.

Materials and labour Sub main wiring with 2 runs of single core PVC insulated unsheathed stranded copper conductor FRLS type of size 6 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor of size 6 Sqmm FRLS type as earth lead drawn in and including PVC conduit, medium grade, ISI marked not less than 25mm dia after taking out old un serviceable wring including PVC conduit complete all as directed. Note:- Two runs of 6 Sqmm main conductor and one run of 6 Sqmm earthing conductor with one run of PVC conduit shall be measured as one unit.

Removing unserviceable ceiling fan upto 1200/ 1400 mm sweep from its original position for inspection removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, and capacitor, shaft, rubber reel and PVC connector cleaning and repairing of slots, reassembling and refixing of fan complete including steel clamp with nuts bolt hook for fixing of fan and including 1.5 Mtr length connecting rod and fixing back in position after servicing complete all as specified and as directed. Note:- (i) Spares such as bearing, capacitor, bush, shafts, nuts bolts, rubber reel , fan blade and PVC connector will be measured and paid separately as "Supply only" under relevant items here-in-after and other spare parts which are required to be repalced shall deemed to be included in the rate quoted.

Removing unserviceable Wall mounted fan of any sweep from its original position for inspection removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, and capacitor,cleaning and repairing of slots, reassembling and refixing of fan complete in its original position after servicing complete all as specified and as directed. Note:- (i) Spares such as bearing, capacitor, bush, shafts, nuts bolt will be measured and paid separately as "Supply only" under relevant items here-in-after .

Rewinding the fan motor of ceiling fan 1200/ 1400 mm sweep with super enamelled copper winding wire of suitable gauge and varnishing including testing of fan after rewinding complete all as directed by Engineer-in-Charge.

Rewinding the fan motor of Wall mounted fan of any sweep with super enamelled copper winding wire of suitable gauge and varnishing including testing of fan after rewinding complete all as directed by Engineer-in-Charge.

Supply only Ball bearing suitable for ceiling fan upto 1400mm sweep / Wall mounted fan 400mm sweep.

Supply only Capacitor of 2.5 mfd for ceiling fan./ wall mounted fan.

Supply only Gun metal bush of suitable for ceiling fan .

Supply only nuts, bolts for ceiling fan.

Supply only shaft for ceiling fan 1200/1400mm sweep.

Supply only PVC Connector for ceiling fan 1200/1400mm sweep.

Supply only Rubber reel insulator for ceiling fan 1200/1400mm sweep.

Material and Labour Painting of ceiling fan of any size and sweep complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc including taking out of ceiling fan and refixing in same position complete all as specified and as directed by Engineer-in-Charge.

Material and Labour Painting of Wall mounted fan of any size and sweep complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc including taking out of ceiling fan and refixing in same position complete all as specified and as directed by Engineer-in-Charge.

Removing unserviceable exhaust fan upto 450 mm sweep from position replacement of unserviceable bush and bearing, open the covers for repairs removing burnt out coils from the slots, cleaning and repairing of slots and refixing of fan complete all as specified and as directed. Note:- (i) Spares such as bearing, capacitor and bushes etc will be paid separately as Supply only under relevent items here-in-after.

Rewinding the fan motor of exhaust fan of any sweep with super enamelled copper winding wire of suitable gauge and varnishing including testing of fan after rewinding complete all as directed by Engineer-in-Charge.

Supply only Bush suitable for exhaust fan of suitable sweep.

Supply only Ball bearing suitable for exhaust fan of suitable sweep.

Supply only capacitor 3.15 mfd for exhaust fan of suitable sweep.

Material and Labour Painting of Exhaust fan of any size and sweep complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc including taking out of exhaust fan and refixing in same position complete all as specified and as directed by Engineer-in-Charge.

Materials and labour Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6.00 mm thick buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip projected by 15 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 Cm c/c both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I including taking out of old unserviceable earth pit with all accessories complete all as specified and as directed.

EXTERNAL ELECTRIFICATION:-

Supply and fix New generation energy saving and environmental friendly long life LED street light luminaries 90 watt with 50mm dia light grade GI pipe bent to shape of 45º 1.5 long, made up of pressure die cast aluminium housing with high power LED as lighting source and lens separate driver compartment with IP66 protection after taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge. Make:- Crompton cat part No. LSTP-90-CDL-M or Make:- Bajaj cat part No. BRTFG 90W LED I V2 or Make:- surya cat part No. SLE UL 90W IP66 (LXN)

Supply and fix New generation energy saving and environmental friendly long life LED street light luminaries 45 watt with 50mm dia light grade GI pipe bent to shape of 45º 1.5 long, made up of pressure die cast aluminium housing with high power LED as lighting source and lens separate driver compartment with IP66 protection after taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge. Make:- Surya cat part No. SLE UL 45W IP66 (LXN) or Make:- Bajaj BRTFG 45W LED V2 or make:- Crompton cat part No.LSTS 45 CDL M.

Supply and fix LED IP65 rated inverted Pyramid Tripod type, LED Bollard 9/10 Watt capacity with soft 360° light distribution with all accessories and necessary connection including taking down old unserviceable one complete all as specified and as directed. Make:- Crompton cat part No. LBLSN 10 CDL or Make:- Surya cat part No. SLE BL 9W- BLK800.

Supply and erecting steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screw as specified, type 410 SP-31, 9 Metre long including two coats of aluminium paint over one coat of red oxide primer including 200mm thick PCC type D2 ( 1:4:8, using 40mm graded crushed stone aggregates) for pole foundation bed with dismantling of old unserviceable pole and PCC complete all as specified and as directed by the Engr-in-Charge. Note:- Rates quoted shall be deemed to be inclusive of following works:- (a) Material and labour for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coats of aluminium paint over a coat of red oxide primer including preparation of surface. (b) Material and labour for writing letter or figures (Block, Roman, Italic as Indian) with thick synthetic enamelled paint of apprised shade n exc 5 Cm height including numbering of pole all as directed by EIC. Make:- Calcutta Pole/ Bansal/ Jindal steel/ National Tubing

Material and labour for PCC (1:2:4) type B-2 using 40mm graded stone aggregate with and including all necessary form work complete all as specified & directed.

Supply and fix LED decorative post top lantern, 40 Watt capacity for energy efficient conservation upto 50% and with eco friendly lighting system with all accessories and necessary connection including taking down old unserviceable one complete all as specified and as directed. Make:- Crompton cat part No. LPTO 40 CDL-M or Surya cat part No. SLE PT 40W-ETPP or Make:- Bajaj cat part No.BRIL 45W LED NW

Material and labour Preparation of old painted surface of existing steel tubular swaged pole 9 mtr long, cross arms, clamps, GI street light bracket etc and applying two coats of aluminium paint including writing pole number & bottom of pole painted with black paint with yellow strip around between the junction of aluminium paint and black paint complete all as specified and directed.

Supply and fix Thermoplastic, polycarbonate pole junction box of size 170mmx 170mmx 1052mm and box should have four terminal of 25 Sqmm and earth terminal along with MCB 6 Amps and fixed to pole with MS clamp made out of MS flat of section 25x 3mm including all necessary fittings and connection including taking down old unserviceable one complete all as directed by Enginner-in-Charge. Make:- RMC / Hansel.

All s per item No 90 here-in-before but size 100mm x 100m x 75mm

Supply and Fix CPRI approved feeder pillar box, outdoor type, totally enclosed vermin proof of size 1000mmx 700mm x400mm double door, both front and back side with locking arrangement, prewired made out of 3mm thick CRCA sheet with 04 Nos legs made out of mild steel angle iron 40mmx 40mm x6mm section and 0.60 m long suitably grouted on ground with PCC type C2 (1:3:6, using 40mm graded crushed stone aggregates) and cement plaster 15mm thick in CM 1:4 including painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including 400 amps rated aluminium bus bar 400 amps rated duly colour coded 04 Nos and connecting through copper wire of approprite size with various accessories to be accmodated in it and connecting incoming and outgoing cable by means of necessary lugs, glands, PVC tape including testing on complete installation complete all as specified and as directed. Note:- Cost of MCCB, change over switch, voltmeter, Ampmeter & indicator lamps shall be measured and paid under relevant items of these schedule as 'Supply' only items against Item Nos. 92 below.

Supply only MCCB, 160 Amps, 36kA, four pole with thermal and magnetic release including necessary connection including taking down old unserviceable one complete all as specified and as directed Make:- L&T/ Schneider/ siemens/ ABB.

Supply only Changeover Switch, in sheet steel enclosure, four pole, 200 Amps, 415 V including necessary connection including taking down old unserviceable one complete all as specified and as directed. Make:-L&T/ Schneider/ siemens/ ABB.

Supply only Changeover Switch, open execution type, four pole, 250 Amps, 415 V including necessary connection including taking down old unserviceable one complete all as specified and as directed. Make:-L&T/ Schneider/ siemens/ ABB.

Supply only Changeover Switch, in sheet steel enclosure, four pole, 250 Amps, 415 V including necessary connection including taking down old unserviceable one complete all as specified and as directed. Make:-L&T/ Schneider/ siemens/ ABB.

Supply only MCCB, 250 Amps, 36kA, four pole with thermal and magnetic release including necessary connection including taking down old unserviceable one complete all as specified and as directed Make:- L&T/ Schneider/ siemens/ ABB.

Supply only MCCB, 200 Amps, 36kA, four pole with thermal and magnetic release including necessary connection including taking down old unserviceable one complete all as specified and as directed Make:- L&T/ Schneider/ siemens/ ABB.

Supply only MCCB, 100 Amps, 36kA, four pole with thermal and magnetic release including necessary connection including taking down old unserviceable one complete all as specified and as directed Make:-L&T/ Schneider/ siemens/ ABB.

Supply only MCCB, 63 Amps, 25kA, four pole with thermal and magnetic release including necessary connection including taking down old unserviceable one complete all as specified and as directed Make:-L&T/ Schneider/ siemens/ ABB.

Supply only MCB , 32 Amps, DP, 240 Volts , 'C' curve breaking capacity 10 KA as directed by the Engr-in-Charge. Make:-L&T/ Schneider/ siemens/ ABB.

Taking out unserviceable UG cables of any type and any sizes from trenches etc and removing from the site of work complete all as specified and directed. Note:- (i) Serviceable bricks obtained shall be stacked properly for re-use. (ii) Excavation and earth work shall be measured and paid separately under relevant item of these schedule.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 120 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 95 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 70 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 50 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 25 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 16 Sqmm 4 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 10 Sqmm 4 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out as in soft/loose soil for foundation of pole, laying of electric cables etc complete all as directed by the Engr-in-Charge.

All as per item No 109 here-in-before but exceeding 1.5m and not exc 3.00m in depth beyond 1.5m

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm thick complete all as specified in soft/loose soil and as directed by Engineer-in-Charge.

Removing excavated materials of soil not exc. 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge.

Materials and Labour Cutting existing road / path etc for taking out cable and proction pipe and making good the disturbed surfaces with cement concrete type C2 ( 1:3:6, using 40mm graded crushed stone aggregates) of suitable depth complete all as directed by Engineer-in-Charge.

Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge. Note:- Thickness after punning down shall be measured for payment.

Supply and laying in trenches Bricks, sub class 'B' over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge.

Laying only in trenches Old serviceable bricks obtained from taking out old unserviceable XLPE cable, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge.

Supply and fix GI pipe, 40mm bore, light grade for protection & passing of LT cable fixed to pole/walls/laid under floor/roads complete including fittings/clamps as required at site all as specified for size of 40mm bore dia all as specified & directed at site including taking out old unserviceable one.

Supply and fix GI pipe, 50mm bore, light grade for protection & passing of LT cable fixed to pole/walls/laid under floor/roads complete including fittings/clamps as required at site all as specified for size of 50mm bore dia all as specified & directed at site including taking out old unserviceable one.

Supply and fix GI pipe, 80mm bore, light grade for protection & passing of LT cable fixed to pole/walls/laid under floor/roads complete including fittings/clamps as required at site all as specified for size of 80mm bore dia all as specified & directed at site including taking out old unserviceable one.

Materials and Labour for repairing of LT Panels by carry out checking of all electrical connections properly including incoming and outgoing cables with lugs and connections properly with proper size of nuts, bolts and washers as per the requirement and realignment of the cable with MS clamp as directed by Engineer-in-Charge including replacement of old unserviceable spare parts and insulation of busbar with colour code insulation tape and preparation of surfaces of panels internally and externally with dry cloth and removal of dust particles by using air blower and scratching the old painted surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer including repairs of PCC complete all as specified and as directed. Note:- Spare parts shall be measured and paid separately under relevant items of this schedule as " Supply only" items.

Supply only LED indication lamp of colour red, blue & yellow. Make:- L&T/ Schneider/ siemens/ ABB.

VAGIRATHI ENGINEERING COMPANY

TOTCO

INDIA ELECTRICAL EQUIPMENTS

UNIVERSAL TRADING CENTRE

R.K.TRADING CO. INDIA

DILIP CONSTRUCTION

EASTERN REFRIGERATION AND ELECTRICAL CO

UNITED ENGINEERS

DEB AND COMPANY

PRABIR TRADERS

ELECTRO FREEZE

SINHA ENTERPRISE

SHEIKH ENTERPRISE

S.K. TRADERS