Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 LAccepted-AOC | ₹1.8 L | L1 | Accepted-AOC Lowest bid |
| 2 | L2₹2.1 LRejected-Finance NOT AVAILABLE | ₹2.1 L | L2 | Rejected-Finance Other than L1 |
| 3 | L3₹2.2 LRejected-Finance SUMATEE BHAWAN GUWAHATI AIRPORT NEAR BORJHAR TELEPHONE EXCHANGE GUWAHATI 781015 ASSAM | KAMRUP METRO | ASSAM | 781015 | ₹2.2 L | L3 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | M/s A R Traders L2 | SHIVAM CONSTRUCTION L1 | Ms Sukumar Talukdar and Co. L3 |
|---|---|---|---|---|---|---|
| 1.00 | S&F for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portion) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, straight, mitred and jointed mechanically whetever required including cleat angle, Aluminium snap beading for glazing/ panellig C.P brass/ stainelss steel screws, all complete as per architectural drawings and directions of Engineer-in-Charge. | 60 | Kg | 780 ₹46,800 | 815 ₹48,900 | 890 ₹53,400 |
| 2.00 | S&F for Anodised aluminium powder coated (thickness of powder coating not less than 50 micron) door shutters aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium shap beading screws etc. complete all as specified and directed. | 2.1 | Sqm | 6,000 ₹12,600 | 2,950 ₹6,195 | 6,000 ₹12,600 |
| 3.00 | S&F for Sheet glass 5.5 mm thickness, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane as per instructions of manufactruers . | 20 | Sqm | 800 ₹16,000 | 1,185 ₹23,700 | 1,690 ₹33,800 |
| 4.00 | S&F for 12 mm thick particle board for insulation purposes, fixed with screws to aluminium frame work complete all as specified and directed. | 20 | Sqm | 1,350 ₹27,000 | 675 ₹13,500 | 1,250 ₹25,000 |
| 5.00 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc complete all as specified and directed. | 0.33 | CuM | 1,250 ₹412.50 | 400 ₹132 | 1,100 ₹363 |
| 6.00 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM (1:6) finished even and smooth without using extra cement all as directed by Engr-in-Charge | 7 | Sqm | 400 ₹2,800 | 270 ₹1,890 | 300 ₹2,100 |
| 7.00 | M&L for preaparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over a coat of chalk whitening (preparatory to distemper) applied over 1 to 2mm thick BIRLA/ JK (or equivalent) water-proof wall care putty complete all as specified and directed by Engineer-in-Charge. | 7 | Sqm | 90 ₹630 | 72 ₹504 | 200 ₹1,400 |
| 8.00 | S&F in repair mild steel mortice lock 4 levers, vertical type, size 100mm complete all as specified and directed. | 1 | Each | 3,500 ₹3,500 | 750 ₹750 | 1,400 ₹1,400 |
| 9.00 | S&F for anodised aluminium powder coated (thickness of powder coating not less than 50 micron) window and ventilator shutters, sliding type with sash bars, aluminium sections weighing 0.55kg/mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified and directed. | 1.44 | Sqm | 6,000 ₹8,640 | 2,380 ₹3,427.20 | 6,000 ₹8,640 |
| 10.00 | S&F for mild steel in framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard brars barred iron doors; ladders; framed baulsters ; walk ways railings; frame work of water tank and similar work conforming to Fe 290. Gde E-165 | 60 | Kg | 160 ₹9,600 | 136 ₹8,160 | 140 ₹8,400 |
Updated dates
Tender Value
Refer Docs
EMD Value
₹4,560
Closing Date
22 Apr 2026, 6:00 pmClosed
GE (AF) BORJHAR
Garrison Engineer (AF) Borjhar, Military Engineer Services, Guwahati Airport- PO, Borjhar Airport, Guwahati-15, Assam, Pin- 781015, Tele 0361 - 2840127
Provn of certain works services for REB (E) at 19 Wing under GE (AF) Borjhar
2026_MES_757680_1
8542/BOR/E8
Open Tender
Civil Works
90 days
GE (AF) BORJHAR
MES Contractor enlisted as Class E category a(i) and having deposited Standing Security of Rs 1,00,000.00 with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category.
7 documents required · 7 mandatory
₹300
GE (AF) Borjhar
₹4,560
Yes
23 May 2026
25 Mar 2026
24 Apr 2026
25 Mar 2026
22 Apr 2026
8 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
S&F for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portion) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, straight, mitred and jointed mechanically whetever required including cleat angle, Aluminium snap beading for glazing/ panellig C.P brass/ stainelss steel screws, all complete as per architectural drawings and directions of Engineer-in-Charge. | - | Kg | - | - | |
S&F for Anodised aluminium powder coated (thickness of powder coating not less than 50 micron) door shutters aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium shap beading screws etc. complete all as specified and directed. | - | Sqm | - | - | |
S&F for Sheet glass 5.5 mm thickness, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane as per instructions of manufactruers . | - | Sqm | - | - | |
S&F for 12 mm thick particle board for insulation purposes, fixed with screws to aluminium frame work complete all as specified and directed. | - | Sqm | - | - | |
Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc complete all as specified and directed. | - | CuM | - | - | |
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM (1:6) finished even and smooth without using extra cement all as directed by Engr-in-Charge | - | Sqm | - | - | |
M&L for preaparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over a coat of chalk whitening (preparatory to distemper) applied over 1 to 2mm thick BIRLA/ JK (or equivalent) water-proof wall care putty complete all as specified and directed by Engineer-in-Charge. | - | Sqm | - | - | |
S&F in repair mild steel mortice lock 4 levers, vertical type, size 100mm complete all as specified and directed. | - | Each | - | - | |
S&F for anodised aluminium powder coated (thickness of powder coating not less than 50 micron) window and ventilator shutters, sliding type with sash bars, aluminium sections weighing 0.55kg/mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified and directed. | - | Sqm | - | - | |
S&F for mild steel in framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard brars barred iron doors; ladders; framed baulsters ; walk ways railings; frame work of water tank and similar work conforming to Fe 290. Gde E-165 | - | Kg | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.68 MB
Tndr8542.pdf
Tender Documents • 1.22 MB
BOQ_848710.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid