CERTAIN REPAIR TO MANHOLES, SEPTIC TANK SEWAGE LINE FENCING PATH DRAIN AND OTHER MISC B/R WORK UNDER AGE B/R II OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A'

Note for Cleaning of sewage line, manhole, Sump/septic tank, soakage well, trap etc: - (i) The contractor shall provide two safiwala with two helper alongwith cleaning insruments/tools to report at complaint cell/AGE BR-II office in the morning by 9:00 Hrs to receive day to day complaints. (ii) All the sewage pump, tool and plant and other allied arrangement for making sewage line functional will be made by the contractor without any extra cost to the Govt and cost shall be deemed to be included with quoted unit rate. (iii) The details of Safai wala shall be submitted by the contractor to GE through Engineer-in-charge Name, Father’s name, Full address with passport size photo, covid test and insurance of employees (Safai wala) within 15 days commencement of work alongwith insurance from Govt Agency. (iv) Details of bldgs Nos or location/position of septic tank, manhole, soakwell shall mentioned against each job in Register. (v) Complaint should br attend/completed within 48 Hrs after receiving complaint slip failing which a penalty of rate 500/- will be recovered from the contractor.

Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

Cleaning / clearance of blocked WC (any type) at any floor from WC to first manhole and making the drain pipe fully functional by flushing with water to the entire satisfaction of Engr-in-Charge, including disposal of sludge / waste materials upto 50 mtr and burrying the same in a pit complete all as specified and directed. Note: - (a) Cost of excavation and removal of surplus soil for pit for burrying the wastes/sludgs etc shall deemed to be included in the unit rate. (b) Any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engineer-in-Charge without any extra cost.

Cleaning / clearance of blocked kitchens, bathroom, WHB from Nahani /floor trap to gully trap / Ist manhole and making the drain pipe full functional by flushing with water to the entire satisfaction of Engineer-in-Charge, including disposal of sludge /waste material upto 50m and burrying the same in a pit complete all as specified and directed. Note: - (a) Cost of excavation and removal of surplus soil of pit for burrying the wastes/sludgs etc shall deemed to be included in the unit rate. (b) Any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engineer-in-Charge without any extra cost.

Cleaning of blocked pipe from Floor trap/Nahani trap, Gully trap, water closet and CI pipe upto First manholes by removing the sludge/mud,silt both organic and inorganic nature including any type of forign materialand removing waste material slaudge etc to a distance exceeding 50 mtrs and sealing the sides of traps in bath/kitchen using Aqua TS of 'Aquashield water proofing' or equivalent, any damage caused during cleaning shall be made for smooth functioning and madde good by the contractor to the entire satisfaction of EIC.

Dewatering of septic tank/soakage well of any depth and description by manual or with sewage pump and sewage tanker after pluging of incoming sewage line and throwing water into non residential area or in drain/nallaha complete all as specified and directed.

M&L for cleaning of man holes not exc 1.5 mtr deep and removing slaudge/waste material to distance n.exc 50 mtr and burying in pits and refilling the same complete all as specified and as directed. (Note: The cost for excavation and earth work for pits is deemed to be included in the unit rate)

Description all as per serial item no 9.00 above but exceeding 1.5 mtr deep not exceeding 3.0 mtr.

Description all as per serial item no 9.00 above but exceeding 3 mtr deep and above.

Cleaning of underground drain pipe of 150 mm bore including manholes by rodding from manhole to manhole, manhole to septic tank, flushing with water taking out sludge and other materials blocking the drain pipes, carrying/removing the same outside the defence land complete all as specified and directed.

Cleaning of underground drain pipe of 200 mm bore including manholes by rodding from manhole to manhole, manhole to septic tank, flushing with water taking out sludge and other materials blocking the drain pipes, carrying/removing the same outside the defence land complete all as specified and directed.

Cleaning of underground drain pipe of 300 mm bore including manholes by rodding from manhole to manhole, manhole to septic tank, flushing with water taking out sludge and other materials blocking the drain pipes, carrying/removing the same outside the defence land complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes foundations of poles/stays/pipes etc .not exc 10 Sqm area on plan and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

Removing of excavated soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.

M&L for Plain cement concrete, (Nominal Mix), type D-2, 1:4:8 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete etc complete all as specified and directed by Engr-in-Charge.

M&L for Plain cement concrete, (Nominal Mix), type B-2, 1:2:4 (using 40 mm graded crushed stone aggregates) as in surface channel and drain complete all as specified and directed by Engr-in-Charge.

M&L for Plain cement concrete, (Nominal mix), type B-1, 1:2:4 (using 20mm graded crushed stone aggregates) as in cills, coping, apex stone, bed plates and lintel upto 1.6m clear span etc including weathering slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

M&L for Precast reinforced cement concrete, (Nominal mix), Type B-1, 1:2:4 (using 20mm graded crushed stone aggregates) as in cover slab, manhole cover, shelves and similar articles with plain face, set and jointed in cement mortar 1:4 complete all as specified and directed. Note: - Reinforcement shall be measured and paid separately

M&L for Reinforced cement concrete, (Nominal mix), type B-1, 1:2:4 (using 20mm graded crushed stone aggregates) as in slab supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note: - Reinforcement shall be measured and paid separately.

Supply only liquid water proofing compound of approved quality complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6 complete all as specified and directed.

Ditto all as per serial item No 24.00 here-in-before but except bricks Note: - Old bricks obtained against demolition shall be used.

Form work to sides and soffits of suspended slab, such as roof slab, floor slab, landing and similar work not exceeding 200mm thick (horizontal or sloping) for rough finish surfaces complete all as specified and directed.

Taking down cement plaster of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 with water proofing compund, finished surfaces fair and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note: - WPC shall be measured and paid separately under relevent items.

M&L for TMT bars 10mm dia, (Fe-500/ Fe-550D) cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars 8mm dia, (Fe-500/ Fe-550D) cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar for any size dia pipes complete all as specified and directed.

M&L for Plain cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in plain cement concrete (Nominal mix) type D-2, 1:4:8 (using 40mm graded crushed stone aggregates) for 100mm bore pipe complete all as specified and directed.

M&L for Plain cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in plain cement concrete (Nominal mix) type D-2, 1:4:8 (using 40mm graded crushed stone aggregates) for 150mm bore pipe complete all as specified and directed.

M&L for Plain cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in plain cement concrete (Nominal mix) type D-2, 1:4:8 (using 40mm graded crushed stone aggregates) for 200mm bore pipe complete all as specified and directed.

M&L for Plain cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in plain cement concrete (Nominal mix) type D-2, 1:4:8 (using 40mm graded crushed stone aggregates) for 300 mm bore pipe complete all as specified and directed.

M&L for Salt glazed stone ware drain pipe of 100mm bore (internal bore) garde 'A' laid in trenches and jointed complete all as specified and directed.

M&L for Salt glazed stone ware drain pipe of 150mm bore (internal bore) garde 'A' laid in trenches and jointed complete all as specified and directed.

M&L for Salt glazed stone ware drain pipe of 200mm bore (internal bore) garde 'A' laid in trenches and jointed complete all as specified and directed.

M&L for Salt glazed stone ware drain pipe of 300mm bore (internal bore) garde 'A' laid in trenches and jointed complete all as specified and directed.

M&L for cast Iron floor trap with dia of outlet 75mm with CI grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1 complete all as specified and directed.

M&L for steel 75/100mm gratings with dia of outlet with including jointing to waste pipe fixed in cement concrete PCC 1:2:4, type B-1/white cement complete all as specified and directed.

M&L 40mm thick plain cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and directed.

M&L for 100mm thick PCC type B-2 1:2:4, using 20mm graded crushed stone aggregate as in flooring finished even and smooth without using extra cement with spike rolling to surfaces or making impression of expanded metal, whilst the concrete is green complete all as specified and directed.

M&L for providing 75mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 metre and turnings) duly filled with fine sand and bitumen in the ratio of 3:1, complete all as specified and directed.

Demucking of filled soil in drains of any size depth or section in any condition as per site requirement and spreading along road side berms complete all as specified and directed.

Cutting/clearing of small plants, bushes, wild vegetation growth and removal of rubbish and other materials upto a distance exc. 50mtr but n. exc 100 mtr complete all as specified and directed.

M&L for vitreous china squatting pan water closet, orissa pattern, size 580x440mm, white with integral foot rests including 'P' or 'S' trap of same material (excluding flushing cistern and flush pipe), provn of cement concrete/lime concrete and jointing to flush pipe (fixed in repair) and making good to dismantled/damaged tiling floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated) complete all as specified and directed.

M&L for Vitreous china coloured wash down water closet pan ( anglo Indian/Padestal Pattern), ( in repair), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), and making good to dismantled/damaged tiling floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated) complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick, area of each tiles exc. 0.11 SQM and but n.exc. 0.18 SQM in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, incl Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 450mm x 350mm x 7mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, incl Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F (in repair) angle valves cast copper alloy 15 mm, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed.

S&F as (in repair) bib tap 15 mm bore fancy type cast copper alloy complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

M&L for 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends (fixed in repair), complete all as specified and directed.

M&L PCC 1:5:10 type E2 using 40 mm graded brick aggregate as in filling under sunken floors incl, Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F as in repair 15mm bore Pillar taps fancy type, cast copper alloy, with chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed

S&F in repair white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed.

Dismantling of cast iron or pvc or reinforced concrete drain pipes, upto 100mm bore jointed in cement mortar and taking out of trenches, if required.

S&F in repair for 50 mm bore pvc, waste and vent pipes(spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or vertically cast complete all as specified and directed.

S&F in repair for 75 mm bore pvc soil, waste and vent pipes(spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or vertically cast, complete all as specified and directed.

S&F in repair for 110 mm bore PVC soil, waste and vent pipes(spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or vertically cast/fixed in wall , complete all as specified and directed.

S&F 110 mm bore PVC Bends of (any radius), diminishing piecs or tapers (larger bore measured) fitted with oval accesss doors complete all as specified and directed.

S&F 75 mm bore cast iron Bends of (any radius), diminishing piecs or tapers (larger bore measured) fitted with oval accesss doors complete all as specified and directed.

S&F 75 mm bore PVC of single Tee/Y junction laid and jointed, complete all as specified and directed.

S&F 110 mm bore PVC of single Tee/Y junction laid and jointed, complete all as specified and directed.

S&F in repairs 110/125 mm PVC floor trap/nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 complete all as specified and directed.

S&F in repairs Salt-glazed stoneware gully traps, square or round mouthed, type `P' of size 150x100. Rates includes for conecting to drains and setting in cement mortar 1:1.

Dismantling posts or struts embedded in Concrete, brick work, masonry, etc. (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground all as directed.

Dismantling posts or struts embedded in natural ground etc. (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground all as directed.

Dismantling of fencing any type all as directed.

Excavating in post holes (Or similar) each n exc 0.5 Cum getting out returning fillin in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good complete all as specified and directed.

M&L for Cement concrete Type C2 1:3:6 (40mm graded stone aggregrate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for Steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth including preparation of surfaces complete all as specified and directed.

Mild for steel screw bolts(machine made) 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends Fe 290 (Gde E-165) complete all as specified and directed.

M&L for PCC (1:3:6) Type C1 using 20 mm graded stone aggregate as in surface channel & drain including form work complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth of cement concrete using extra cement including forms moulds, mitred/ stopped ends etc.

Ditto all as item no. 80 here-in-above but Add or deduct for each 25 mm girth or part thereof over or under 30cm

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.

M&L hardcore of broken stone or boulders gauge n.exc 63 mm, deposited, spread & levelled in layers n.exc 15 cm thick, watered & rammed to a true surface complete all as specified & directed.

M&L for 75 mm thick cement concrete 1:3:6 type C- 2 using 40mm graded stone aggregate as in floor complete including all as specified & directed.

M&L Sand cushoning under interlocking paver block floors or in foundations including watering and consolidation complete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and pigment complete all as specified and directed.

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete including provision of 20mm screed in CM 1:6, complete all as specified and directed.

Removing excavated materials (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m the starting point complete all as specified and directed.

M & L for PCC 1:3:6 type C1 using 20 mm graded aggregate as in copping and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L Fly ash Brickwork straight or curved on plan exc 6m mean radius built in Cement morter 1:6 complete all as specified and directed.

M&L Brickwork with flyash bricks, straight or curved on plan to any radius i n half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) as finished fair and even without using extra cement complete as specified and directed.

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed

Dismantling barbed wire fencing any type complete all as specified and directed.

S & F galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia bars at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provn of galvanised MS wire complete all as specified and directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 20,875.00 (refer Tender Srl Page No 39). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

NAYAK BROTHERS

GURUNG CONSTRUCTION

MS CHOWDHURY ENTERPRISE

M/S R. K. INDUSTRIES