SPECIAL REPAIRS AND ADDITION / ALTERATION OF MALENAD HALL OF BLDG NO P-113 AT CGRA KANKANADY NEW MANGALORE UNDER GE(I)(CG)GOA

Amount

S & F Steel work in tubular square/rectangular/round section trusses as in main and cross beam, rafter and purline including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 , complete all as specified and directed

S & F Fe 410W (Gde E-250) quality A for 6mm thick mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment to bottom of GI pipe complete all as specified and as directed conforming to Fe-410W complete all as specified and directed

S & F Steel work conforming to Fe-410-w(Gde E-250 quality-A), Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. in cluding cleats, brackets, etc. complete all as specified and directed

M & L two coats of Synthetic enamel paint over a coat of red oxide on new steel surfaces of any description, not otherwise described over 10cm width or grith after preparation complete all as specified and directed

S & F for Pre painted galvalume aluminium zinc coating Gi based coorugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed

S & F for Pre painted galvalume aluminium zinc coating Gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed

Taking down existing roof treatment sheet without disturbing plastering coat beneath old water proofing sheet tretment, including cleaning and preparation of old surfaces complete all as specified and directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

M & L for dressed laterite stone masonry, well bonded, bedded and solidly hearted built in Cement mortar 1:6 complete all as specified and directed

Taking down cement plaster on brick walls including racking out joints haking for keys scrubbing down with water etc complete all as specified and directed

M & L rendering 15mm thick in Cement mortar 1:6 on fair surfaces of brick works /concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed

M & L Preparing new plastered surfaces of walls applying two coats of oil emulson distemper over one coat of cement primer complete all as specified and directed

M & L rendering 15mm thick in Cement mortar 1:4 on finished with water proofing compound @ 3% by weight of cement finish the surfaces even and fair complete all as specified and directed [Note:- WPC will be measured and paid separately]

Supply only integral water proofing compound complete all as specified and directed

M & L preparation of finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed

M & L for preparing old surface of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying one coat of Oil emulsion distemper complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

S & F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exc 0.06sqm but n.exc 0.11sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

S & F Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing plaster in cement mortar 1:4 complete all as specified and directed

Taking up or down 15mm dia steel tubing and connections setting aside serviceable pipe for reuse and removing unserviceable pipe from site complete all as specified and directed

Taking up or down 25mm to 32mm dia steel tubing and connections setting aside serviceable pipe for reuse and removing unserviceable pipe from site complete all as specified and directed

Supplying and laying of 16 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed

Supplying and laying of 25mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed

M & L Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed

Dismantling water tanks and removing to store exc 500 but n exc1000 ltrs complete all as specified and directed

S & F 1000 Ltrs capacity rotational moulded polythene water storage tanks three layer (cylindercal vertical with closed top ) hoisted and fixed in position complete all as specified and directed

S & F in repairs 20mm dia float valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed

S & F in repairs Pillar taps fancy type 15 mm bore cast copper alloy, with capstain heads, chromium platedscrewed down high pressure, with or without lettered "Hot" of "Cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed

S & F in repairs for Bib taps fancy type, Chromium plated for iron pipe and fixed 15 mm bore complete all as specified and directed

S & F in repairs Stop valves cast copper alloy 15 mm dia, fancy type, chromium plated, screwed down, high pressure, with crutch handle screwed both ends for iron pipe or for unions complete all as specified and directed

S & F PVC connection 15 mm size with PTMT nuts of lengths 450 mm complete all as specified and directed

S & F in repairs health faucet Chromium plated (hand shower type) with shut off valve (thumb or fush button type) to allow controlled and continuous flow of water with flexible polythene pipe of adequate length and with wall mounted pedestal for hanging faucet including taking down of old one complete all as specified and directed

S & F in repairs Soap dish vitreous china coloured appx size 160mm x 160mm x90mm recessed type fixed to plugs with Chromium plated brass screws complete all as specified and directed

S & F in repairs vitreous china wash basin, white, flat back, size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and 32mm dia waste pipe complete all as specified and directed

S & F in repairs PVC valveless, syphonic action type, flushing cistern 10ltrs capacity, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia. PVC flushing pipe complete all as specified and directed

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white , including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover, mild steel chromium plated hinging device complete but excluding flushing cistern including making good damaged/disturbed surfaces complete all as specified and directed.

S & F in repairs Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed

S & F in repair water closet (squatt pattern) vitreous china 'Orissa 'pettern size 580 x 440 mm white with integral foot rests excluding flushing cistern but including PVC flush pipe & provision of lime concrete bedding complete all as specified and directed.

S & F in repair toilet paper holder of stainless steel of size 10.5 cm x9cm fixed to walls with chromium plated (Chromium Plated) brass screws complete all as specified and directed

S & F Brass chromium plated towel rail 20 mm dia, 'D' type 600mm long between flanges with brackets fixed to walls with brass screws complete all as specified and directed

S & F looking mirror of size 600x450mm, 5mm thick bevelled edge mounted on 6mm thick plywood including fixing with screws and cup washers complete all as specified and directed

S & F Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

S & F in repairs 32mm dia Harrison rails,stainless steel fancy type with fixing brackets, stops, rollers etc complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

S & F 110mm bore PVC (SWR) bends any radius including jointing with solvant cement, complete all as specified and directed

S & F Brands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large haps and staples; chains, hand made sliding bolts, clamps, hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way straps, plate washers and similar small articles conforming to Fe-290 Gde -E-165 complete all as specified and directed

Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each (without taking off shutters from the frames) complete all as specified and directed

S & F Second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

M & L Flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

M & L Preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S & F Factory made PVC door frame of size 50 mm x 47 mmmade out of 5 mm thick plain colour, PVC sheet reinforced with MS square tube complete all as specified and directed

S & F Factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed

S & F 75mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S & F in repairs 100mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed

S & F Aluminium handles 100 mm long cast type, anodised complete all as specified and directed.

M & L for 150mm size aluminium handle (ISI Marked) cast type anodized, fixed complete all as specified and directed.

S & F 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S & F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S & F Floor door stopper of.brass body and tongue with hard drawn steel spring overall length of cover plate 150 mm and fixed complete all as specified and directed

S & F 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L 75mm thick Plain cement concrete 1:3:6 Mix type C2 as in plinth protection and in path surface to be finished without using extra cement complete all as specified and as directed.

Hard core of gauge n exc 63mm, deposited ,spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M & L for dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed

S & F aluminium snap grid size 605 x 605mm false ceiling frame work of angle 25x25x2mm. Main TEE 38x25x1.5mm and cross TEE 25x25x1.4mm and size of grid 605x605 mm complete all as specified and directed.

Providing and fixing 12mm thick perforated Gypsum Board 600mm x 600mm size in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed

S & F hangers 6 mm dia GI(upto 1200 mm length)adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.50mm dia, 40 mm long complete all as specified and directed.

M & L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed

M & L 4mm thick aluminium composit pannel sheet (ACP) with all fixtures for doors and cupboards wherever complete all as specified and directed

Excavataion in trenches width not exceeding 1.5mtr and depth not exceeding 1.5metre for foundations, not exceeding 10 Sqm on plan for manholes etc and getting out in soft/disintegrated rock, complete all as specified and directed

M & L for Plain cement concrete 1:4:8 type D2 using 40mm graded stone agg as in fdn /mass concrete for wall and post struts complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/disintegarted rock complete all as specified and directed

Removing excavated material exc. 50m and n.exc 100m & depositing where directed at a level n exc. 1.5 m in soil all as complete all as specified and directed

M & L Reinforced cement concrete type B1 1:2:4 using 20mm graded aggregate for coloumns, Pillars, Posts etc complete all as specified and directed

M & L Reinforced cement concrete type B1 1:2:4 using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed

Use and waste of form work to sides of pillars,posts, struts, piers, coloumns and stanchions including for fair finished surfaces complete all as specified and directed

M & L Mild steel TMT bars 10mm dia & over cut to length ,bent to shape required including cranking, bending spirally for hooping for coloumns,hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing withclips complete all as specified and directed

M & L Mild steel TMT bars 5mm dia and over up to and including 10mm dia & over cut to length ,bent to shape required including cranking, bending spirally for hooping for coloumns,hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing withclips complete all as specified andd as directed as in stirrups , spaces and binders complete all as specified and directed

M & L Providing Plain cement concrete type B1-1:2:4(using 20mm graded aggregate) in height, coping,kneelers, apex stones,bed plates,incl.weathering, stages for tank, roof kerbs covering over chajjas slightly,rounded or chamfered angles and throating complete all as specified and directed

S & F Gun metal globe or gate valves with iron wheel head, screwed both 25 mm bore in repairs complete all as specified and directed

Taking down and re-fixing of shutters in same opening but exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S & F Powder coated anodised aluminium frame for windows, ventilator with one or more rebates including joining cleat for fixing etc. complete (Minimum thickness of powder coating 50 micron) complete all as specified and directed

S & F Powder coating of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, three track sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed

S & F Ordinary glass, 4 mm thick and glazing with glazing clips to Al frame, exc 0.5 Sqm in each pane complete all as specified and directed

S & F UPVC rain water gutter 160mm x 100mm x 3mm thick complete all as specified and directed

S & F GI spouts 50mm dia projecting at least 45 cm clear of the wall complete all as specified and directed

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. all as specified and directed.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including cover plate and metal flush box as suitable module and including suitable size PVC rigid non metallic PVC conduit with all accessories concealed in walls and including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor complete all as specified and directed :-

(a) one light/fan point controlled by one, one way switch

(c) one switch socket outlet 5 A on same board with other switch

(d) one switch socket outlet 5 A independent with cable 1.5 sqmm

All as per item No. 5 described here-in-before but with copper conductor cable FRLS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.

Taking down existing UNSV aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including suitable size PVC rigid non metallic PVC conduit with all accessories concealed in walls complete all as specified and as directed. (NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC conduit and its accessories of suitable size shall be measured as one unit length).

S/F Switch Modular 6A one way, 1 module complete all as specified and directed.

S/F Switch Modular 16A one way, 1 module complete all as specified and directed.

S/F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S/F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

Modular Fan step regulator, 120W - 2 module complete all as specified and directed.

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed.

S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size complete.

S & F LED lights fitting 20 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete.

S & F LED light fitting 10 Watt bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down old UNSV ceiling fan and deposited to MES store complete all as specified and as directed.

Supply and fixing exhaust fan, metalic body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and as directed.

M&L for MCB Distribution board double door type SPN 12 way, sheet steel, powder painted, with 200 Amps rated bus bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.

M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with 200 Amps rated bus bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.

M&L for MCB SPN 40-60 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.

M&L for MCB SP 6-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.

Supply, lay, testing and commissioning UG cable XLPE insulated 10 Sqmm 2 Core, armored heavy duty electric cable, 1100 volts grade with stranded aluminium conductor in trenches including suitable size of double grip cable gland and joiinting etc complete all as specified and as directed

Excavation in trenches not exc 1.5m in wide and not exc 1.5 m in depth and getting out in hard/dense soil for laying of cables all as specified and directed.

Returning, filling in, including spreading , levelling, watering and well ramming in layers not exc 25cm in soft / disintegrated rock.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point.

Supply and lay riddled earth in trenches for cable protection, spreading, levelling, Punning and consolidating complete all as specified

Supply and lay old bricks sub class A for cable protection laid trenches all as directed

Supply and lay GI pipe medium grade 20 mm dia as cable protection laid on trench/floor, fixed on pole/wall etc of following sizes all as specified

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised ironor steel all as shown in electricalplate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

KOTIAN -ECC

KDR CONSTRUCTION

Gates Infra Construction Co