REPAIR TO ROOF SHEET FALSE CEILING PLASTERING PERIODICAL SERVICE INCLU INTERNAL ELECTRIFICATION AT WCLU AND OTHER MISC LOCATION UNDER GE (P) CH CHANDIMANDIR

Amount

Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing unserviceable tiles from outside of CH (WC) Chm complete all as directed.

Coloured Non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layers in CM (1:6) etc complete all as specified and directed.

Coloured Non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layers in CM (1:6) etc complete all as specified and directed.

Coloured Vitrified ceramic tiles digital 10mm thick (square/rectangular) polished, area of each tile n. exc 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed

All as per item No 03 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM (1:4) etc complete all as specified and as directed.

Glazed ceramic coloured tiles of size 300mmx450mmx7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc to match including 10 mm thick screed bed or bedding layers in CM (1:4) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid beded and pointed in any mortar

Granite (of any type) work 16 to 18mm thick (table rubbed and polished) in flooring, steps, jambs, pillars, windowcills, cooking platforms and like with and including 15mm thick bedding in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as directed.

Granite (of any type) work 12mm thick (table rubbed and polished) for vertical surface/ wall lining (veneering to wall), over & including 10mm thick rendering in CM 1:4 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed.

Machine cut kota stone slab flooring (pre-polished) 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per item No 10 above but in skirting/dado including 10 mm thick screed bed in CM (1:4) complete all as specified and directed.

Taking down chowkhats or frames n. exc 1.5 sqm each (without taking off shutters from the frames) including cutting out holes for taking out holdfasts and filling the same with PCC 1:2:4 (12.5 mm graded aggregate) , forming jamb if required and plastering jamb cill soffits with CM 1:4 full thickness of wall and side of walls if broken upto 300mm each side during dismantling and making good surfaces with preparation and painting the surfaces with two coats of matching colour on outer and inner surface of wall complete all as specified and directed. Note : Rate also includes labour and material cost of PCC and bricks if required to make good the surface jambs , plastering and painting with matching shade upto complete satisfaction of Engineer-in-Charge

All as per item No 12 above but exc. 1.5 Sqm and n. exc 4 Sqm each

Taking down shutter of any description n exc 1 sqm each all as directed.

Taking down shutter of any description exc 1 sqm but nexc 2 sqm each all as directed.

Taking down shutter of any description exc 2 sqm each all as directed.

Factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, complete all as specified

Factory made steel windows (Box type) w/o glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, complete all as specified

Framed work such as grills, grating, framed guard bars, walk ways, railings etc. using steel conforming to Fe-310-O or Fe-410-O fixed as in repair complete all as specified and directed.

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed (Size of frame 125 x 60mm)

35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (with out shash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.

Panelled shutter (Factory made) 35mm thick of second class hard wood (hollock), edges of framing plain chamfered or rounded, fitted with cut & mitre complete all as specified and directed.

Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

Factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick (stile), with 2, 4 or 6 raised panel design with 2mm thick single piece extruded PVC profile on the front face & 2mm plain coloured single piece extruded PVC profile on back face etc complete all as specified and as directed.

Aluminium barrel tower bolt, 150 mm long,extruded section complete all as specified and as directed.

Aluminium barrel tower bolt, 150 mm long,extruded section fixed in repairs, complete all as specified and as directed.

All as per item No 26 above but 100mm long

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long fixed in repairs complete all as specified and directed

Cold rolled mild steel butt hinges 100 mm long medium weight complete all as specified and directed.

Steel helical door spring 300mm ordinary rat rail rod pattern springs including roller plate complete all as specified and as directed.

150mm long extruded aluminium alloy handle, fabricated type, anodised etc complete all as specified and as directed.

150mm long extruded aluminium alloy handle, fabricated type, anodised etc fixed in repairs, complete all as specified and as directed.

Mortice lock brass 4 levers, vertical type 100 mm fixed in repairs, complete all as specified and as directed.

Powder coated aluminium alloy curtain rails 20mm dia fixed to required lenghts etc fixed in repairs, complete all as directed.

Brass chromium plated curtain rails brackets fancy type for 20mm dia curtain rails etc fixed in repairs, complete all as directed.

Floor door stopper of aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor overall length of cover plate 150mm etc fixed in repairs, complete all as directed.

Aluminum (extruded section body) door closer hydraulically regulated, universal type suitable for door 61 to 80 Kg of approved make fixed in repairs, complete all as directed.

Stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and directed.

Stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples fixed in repairs, complete all as specified and directed.

Taking down aluminium door shutters for necessary repair work and re-fixing in position after adjusting or replacing defective members of rails and styles in position with replacement of steel screws re-threading and fixing on existing devices, resetting or replacing top pivots, floor spring, bottom steel plates etc and resetting or replacing glazing etc for proper function of aluminium door of any size etc complete all as specified and directed. Note : Supply of aluminum section, glazing, top pivots, floor door spring, rubber beading shall be included in quoted rates

Powder coated aluminium frames (Thickness of powder coating not less than 50 micron) for doors , windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified (Thickness of section not less than 3.00MM)

Powder coated aluminium door shutters made out of hollow extruded aluminium sections as mentioned below with and including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, tower bolts, anodised aluminium snap beading, screws to hold glass/ prelaminated particle board etc complete all as specified & directed comprising the following :- (a) Top rail :100mm x 44-45mm, 2.00mm thick (b) Middle & Bottom rail - 150mm x 44-45, 2.00mm thick (c) Vertical styles :83-84mm x 44-45mm, 2.00mm thick

Powder coated aluminium window and ventilator shutter made out of hollow extruded aluminium sections as mentioned below with and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws/U section to hold glass & wiremesh, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified & directed comprising the following :- (a) All rails stiles shall be 83-84mm x 44-45, 2.00mm thick

0.56mm thick plain aluminium sheeting as in ridges, hips, valley gutter, drip and straight flashing etc fixed in repairs, complete all as specified and directed.

Dismantling of wooden boarding of any description and fixed in any position with screws etc complete all as directed.

12mm thick plywood, grade BWR, type BB, fixed with screws to timber framed work etc complete all as specified and directed.

17/18mm thick pre laminated PVC Solid board, pre laminated both side with white lamination as in cupboard side box,cupboard shutters, shelves and drawers fixed with screws and adhesive (Each Individual part will be measured seprately) complete all as specified and directed.

9mm thick pre-laminated particle board, interior grade, pre-laminated both side with decorative choice lamination, ISI marked ( IS: 12853) fixed as panels in aluminium joinery etc in repair complete all as specified and directed.

Hacking out old broken glass of any thickness, size quality or description from wooden frames glazed with putty or fixed with bead complete all as directed.

3mm thick tinted glass, ordinary quality and glazing with oil putty in square n.exc 0.50sqm in each pane complete all as specified and directed.

All as per item No 51 above but exc 0.50 sqm in each pane.

All as per item No 51 above but 4mm thick frosted glass

All as per item No 51 above but 5.5mm thick glass.

Preparation of new wood surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Preparation of old wood surface of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Demolition of brick/stone massonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as directed.

Brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls finished even and smooth without using extra cement etc complete all as directed.

Rendering 5 mm thick in CM (1:3) as in ceiling finished even and smooth without using extra cement complete all as specified and directed

Preparation of old/newly plastered surfaces of wall and applying one coats of cement base paint etc complete all as specified and directed.

Preparation of old plastered surfaces of ceiling and applying one coats of white wash complete all as specified and directed.

Removing of existing treatment of walls and applying one coat of wall care putty and applying two coat of exterior emulsion paint over a coat of primer complete all as specified and directed.

Preparation of old plastered surfaces of wall and applying one coat of oil emulsion distemper etc complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of birla white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as directed.

Preparation of old steel surface and applying one coat of synthetic enamel paint complete all as specified and as directed.

Prepration of old painted wooden surfaces of any description, not otherwise described for, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge/thickness in roof or wall covering complete all as directed.

Pre-painted galvalume aluminum and zinc alloy coating with steel based corrugated steel sheet 0.50mm thick of a colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws etc complete all as specified and as directed.

Galvanised corrugated steel sheeting with two corrugation side lap fixed with L-type or J type cranked hook bolts as in roof coverings, thickness of sheet 0.63 mm.

All as per item no 72 above but in ridges to suit the profile of roofing.

6 mm thick asbestos cement corrugated or semi corrugated sheets in roof fixed with 'L' type or J type or cranked hook bolts.

6 mm thick asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheets fixed with 'L' type or J type or cranked hook bolt.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as directed.

False ceiling of perforated particle designer boards of size 595mm x 595mm x 4mm thick fixed on precoated GI everest grid of tee 2430, framed and suspended with 4mm dia wire including clips etc in patterns as approved by GE, in panels of size 605mm x 605mm fixed in ceiling with necessary fitting and fixtures as per manufacturers instructions, etc complete all as specified and directed.

Providing and fixing Gypsum board ceiling with tiles of size 595mm x 595mmx12mm thick having PVC paper on front side and metalised polyster layer on the back side suitable placed in existing false ceiling grid made of aluminium /GI/MS as per manufacturers instruction etc complete all as specified and directed.

500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed in repairs, etc complete all as directed.

All as per item No 79 above but 1000 litres capacity

GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking down GI tubing with all fittings etc complete all as directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as directed

GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking down GI tubing with all fittings etc complete all as directed.

Bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule fixed in repairs, complete all as directed.

15mm size fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs, etc complete all as directed.

15mm bore brass CP fancy Type center hole basin mixer for mixing hot & cold water screwed down for iron fixed etc fixed in repairs, complete all as specified and directed.

Angular stop valves 15 mm dia cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions fixed in repairs, complete all as specified and directed.

Stop valves 15 mm dia cast copper alloy, chromium plated, fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed.

20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed in repairs, etc complete all as directed.

Waste pipe/ fitting (brass, chromium plated) of any size for sinks, wash basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other and fixed in repairs, etc complete all as directed.

Bib tap 15mm PTMT, fancy type any colour high pressure screwed for iron pipe and fixed in repairs, etc complete all as directed.

Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 etc fixed in repairs, complete all as directed.

Brass chromium plated shower rose 125mm size (ABS body face plate with single flow including shower arm with wall flange 15mm bore) etc fixed in repairs, complete all as specified and directed.

CP Toilet paper holder, fixed to walls with CP brass screws etc fixed in repairs, complete all as directed.

Viterous china squatting pan Orissa pattern size 580 x 440mm white with 'P' or 'S' trap, front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) including provision of lime concrete bedding and connections to flushing cistern/pipe and making good disturbed portion to match existing surface etc fixed in repairs, complete all as directed.

Vitreous china wash down water closet pan (pedestal pattern) white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device fixed in repairs, complete all as specified and directed.

Plastic water closet seat cover white /colour ,closed pattern with flat bottom end cover and mild steel chromium plated hanging device etc fixed in repairs, complete all as specified and directed.

Vitreous china wash basin white flat back size 550 mm x 400mm including all fittings including cutting for and pinning in ends of brackets or erecting stand etc fixed in repairs, complete (waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets etc shall be deemed to be included in the quoted rate)

PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe fixed in repairs, complete all as specified and directed.

110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor/fixed to walls etc fixed in repairs, complete all as specified and directed

110 mm dia PVC (SWR) bends of any radius complete all as specified and directed

Grating CP 110 mm dia etc fixed in repairs, complete all as specified and as directed.

15 mm dia 450 mm long PVC connection pipe with 02 Nos nut at each ends with rubber washer etc fixed in repairs, complete all as specified and directed.

Fancy type Brass chromium plated 600mm long Towel Rod fixed with screws and wooden/plastic cleats etc complete all as directed.

75mm dia cast iron nahani trap/floor trap, with stainless steel grating including grating jointing to waste pipe fixed in cement concrete type B1 (1:2:4) including taking out old floor trap

Brass chromium plated fancy type health faucet or aeroplane jet with 900mm long stainless steel knitted hose pipe for faucet/sensor mixer etc fixed in repairs, complete all as directed.

Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr depth complete all as specified

Returning , filling in including spreading , levelling , watering and well ramming in layers not exceeding 25 cm brick each layer complete all as specified

Removing excavated material not exceeding 50m and depositing where directedat a level not exceeding 1.5 m above the starting point

Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection complete all as directed.

Galvanised steel tubing, light grade, with fittings and MS clamps, nuts, bolts etc of 40 mm dia bore for cable protection for road crossing or ground in pillars for fixing gate light etc complete all as specified.

Supply and lay bricks of sub class 'B' type for protection of U/G cable in trenches all as specified and directed.

Taking down fan, ceiling cable end , dismantling blades and removing fan and blades to store yard AGE E/M (P)

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan Note : Fan will be issued from MES Store taking down under item No 114

Point wiring using approved colour coding as per IS (For phase and neural), with stranded copper conductor 1.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 1.5 Sqmm (Nominal area) single core, multistranded, FRLS, PVC insulated and unsheathed cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified for the following :- Make of cable : Plaza/Finolex/Havells

One light point controlled by one switch/one fan point/one bell or buzzer controlled by one switch & fan regulator.

One socket outlet three pin, 5 Amps on the same board.

One socket outlet three pin, 5 Amps, independent.

Point wiring using approved colour coding as per IS (For phase and neural), with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cabel 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 2.5 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps all as specified. Make of cable : Plaza/Finolex/Havells

Point wiring using approved colour coding as per IS (For phase and neural), with stranded copper conductor 4 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cabel 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 4 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps all as specified. Make of cable : Plaza/Finolex/Havells

Modular metal flush terminal boxes with lumina plate and frame suitable for 3 module complete all as specified and directed. Make : SSK/Legrand/ Anchor

Modular metal flush terminal boxes with lumina plate and frame suitable for 4-5 module complete all as specified and directed. Make : SSK/Legrand/ Anchor

Modular metal flush terminal boxes with lumina plate and frame suitable for 6 module complete all as specified and directed. Make : SSK/Legrand/ Anchor

Modular metal flush terminal boxes with lumina plate and frame suitable for 8 module complete all as specified and directed. Make : SSK/Legrand/ Anchor

Switch modular type single pole one module, 6 Amps complete all as speciifed. Make : SSK/Legrand/ Anchor

Switch modular type single pole one module, 16 Amps complete all as speciifed. Make : SSK/Legrand/ Anchor

Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6 Amps complete all as speciifed. Make : SSK/Legrand/ Anchor

Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6/16 Amps complete all as speciifed. Make : SSK/Legrand/ Anchor

Modular bell push single pole one module, 6 Amps complete all as speciifed. Make : SSK/Legrand/ Anchor

Modular blank plate one module.

Ceiling rose 3 pin, 230 volts PVC polycarbonate insulated body complete all as specified. Make : SSK/CONA/ANCHOR.

Bell ding dong AC 230 volts PVC polycarbonate insulated body complete all as specified. Make : CONA/ANCHOR/LEGRAND.

Modular fan step regulator 120 Watts for 48"/56" sweep ceilling fan 2 Modular complete all as specified. Make : Anchor/Havells/SSK/Legrand

Supply and fixing in replacement LED battern made out of CRCA ms sheet/ alumunium, 4 feet long both side connection arrengement suitable for retrofit LED tube complete all as specified and directed. Make : Helonix/Philips/Havells/Anchor Panasonic

Supply fixing in replacement Retrofit LED tube light 18/20 watt minimum lumens 1980 of 4 feet size with aluminium heat shrink both end connection. Make : Helonix/Philips/Havells/Anchor Panasonic

Supply and fixing in replacement of LED Luminaire 42 Watt minimum, 6500 K suitable for armstorng/grid cealling/surface mounting, with its super bright LED, 2X2 GRID CEILING,including 42 watt LED strip recess mounted complete with drivers and others accessories as per manufactures recommendation complete including fixing arrengement with existing complete all as specified and directed. Make Halonix/Phillips/Havells/Anchor Panasonic

Supply and fixing in replacement Bulk head reliable LED solution with milky diffuser including 6/8 Watt 6500K LED strip including driver ,accessories to fix the same with existing wall and all connected accessories as per manufacturers recommendation complete all as specified and directed. Make Halonix/Phillips/Havells/Anchor Panasonic

Supply and fixing decorative wall mounted Bed side lamp including 5 watt LED bulb/strip Make : Wipro/ havells or make approved by engr in charge

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. all as specified.

Sub main wiring in replacement (with approved colour coding as per IS) with single core FRLS PVC insulated multistranded copper conductor cable 1.1 KV grade (main cable two runs of main cable) alongwith one run of single core FRLS PVC insulated flexible stranded copper donductor 1.1 KV grade of earth for earthing drawn in existing surface/recessed steel/PVC conduit/ concealed conduits with following size

2 run of 6 Sqmm cable + 1 run of 6 Sqmm

2 runs of 4 Sqmm cable +1 run of 4 Sqmm earth wire

Notes: (i) Conduit & conduit accessories shall be measured & paid for separately.

(ii) For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 RUNNING METRE" MAKE OF CABLE: FINOLEX/RPG/PLAZA./Havells

25mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified.

40mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified.

Cutting chases in existing wall for laying of PVC conduits including making good disturbed surfaces of wall after concealing the conduit in wall all as specified.

Sheet metal enclosure 8 way SPN double door, 240 volts complete all as specified and directed. Make : Legrand/C&S/Havells/Indoasian

Sheet metal enclosure 12 Way SPN double door, 240 volts complete all as specified and directed. Make : Legrand/C&S/Havells/Indoasian

Supply and fix in replacement MCB SPN, 'B' series. 10 KA, 240 Volts 40 Amps capacity. Make : Legrand/ C&S/Havells/Indoasian

Supply and fix in replacement MCB SPN, 'B' series. 10 KA, 240 Volts 63 Amps capacity. Make : Legrand/ C&S/Siemens/Indoasian

Supply and fix in replacment MCB SP, 'B' series. 10 KA, 240 Volts, 6-32 Amps capacity. Make : Legrand/C&S/ Siemens/Indoasian

Taking down carefully copper/aluminium sub main wiring complete, including existing batten/conduit etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified.

Supply and fixing MCB TPN DB 4 way double door ,wall mounted,powder coated sheet steel encloser fitted with bus bar ,DIN channel,neutral link and earth link complete connection all as specified and directed.Make : Indoasian/Hager /Legrand/C&S

Supply and fixing MCB TPN 63 Amps . 10 KA ,415N ,IP 20 protection,C curve,operating voltage 415V AC complete all as specified and directed.Make : Indoasian/Hager /Havells/Legrand

Supply and fixing of LED post top lantern with die cast aluminium spigot,spun aluminium powder coated top cover and clear acrylic diffuser .IP 65 protection with max wattage 30 and minimun lumens 3200 with accessories complete all as specified and directed.Make : Havells/C&S LTGLC30WHPlED/W or equivalent in Havells/C&S LTGLC30WHPlED/W

Earhting complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvenised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 03 connected to earthing test point all as specified or indicated including testing on completion.

LED 18 watt , powder coated die cast aluniminium die cast Operated SMD LED Street light 5700k with GI pipe of 40mm nominal dia and required length with nut, bolt and washer complete as specified and directed Make : Havells/C&S LTESSL18WLED

XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of 35 Sqmm 3.5 core. Make : Havells/Gloster/Plaza/RPG/Asian Cables/ Kalinga/ NICCO

XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of 25 Sqmm 3.5 core. Make : Havells/Gloster/Plaza/RPG/Asian Cables/ Kalinga/ NICCO

XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of 16 Sqmm 3.5 core. Make : Havells/Gloster/Plaza/RPG/Asian Cables/ Kalinga/ NICCO

Taking up carefully defective LT UG cable of size 16 to 35 Sqmm 2/4 core and above size disconnecting electric supply from both ends, tracing fault and setting aside/depositing to MES store yard all as specified and directed.

Double wall corrugated (DWC) high density polythene pipes cut to length/size as per site requirement having corrugation on the outer wall and plain surface on the inner wall confirming to IS : 14930 (Part I & II) for protection of underground cable/in PCC with and incl all fittings as required at site for outer dia 78mm, inner dia 63.5mm incuding cutting floor & making good the same to match the existing adjoining surface etc all as specified and directed. Make : Rex Poly Extrusions (Eledrex) or equivalent (ISI Marked). Note : Rates also includes accessories for fixing DWC pipe along wall/roof/cable trays. Note : Rates are inclusive of dimantling/taking out of LT cable from cable tray/along wall for fixing DWC pipes.

Outdoor bus bar made out of CRCA sheet 2mm thick incorporated with 3 phase 4 wire aluminium bus bar of size 40x5 in step way fixed on hygroscopic base insulator with one no incoming MCCB 250 Amp 4P, 36 KA , with thermal adjustable form 70% to 100% , ICS=100% , duly prewired with suitable size of aluminium cable thimbles ,on angle iron frame of size 40x40x5mm grouted in the PCC 1:2:4upto 30 cms deep and 40 cm ground clearance above the ground level upto bottom of bus bar chamber duly painted with powder coated paint and angle iron frmae with two coats of synthetic enamel paint over a coat of red oxide primer including taking down existing complete all as specified and directed. Make L&T/ABB/Schneider

M/S Gupta and Sons

chahalbuilders