Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹89.8 LAccepted-AOC MATHOSHREE PLOT NO 55 SR NO 787 A BEHIND ASHWANI HOSPITAL GOVIND NAGAR NASIK 422 009 | NASIK | NASHIK | MAHARASHTRA | 422009 | ₹89.8 L Quoted ₹91.1 L | L1 | Accepted-AOC L1 |
| 2 | L2₹95.5 LRejected-AOC | ₹95.5 L | L2 | Rejected-AOC NOT L1 |
| 3 | L3₹1.1 CrRejected-AOC SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON W MUMBAI 400 104 | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | ₹1.1 Cr | L3 | Rejected-AOC NOT L1 |
| 4 | L4₹1.3 CrRejected-AOC 70 VARDHMAN NAGAR A P O SHYAM NAGAR AJMER ROAD JAIPUR PIN 342019 | JAIPUR | 342019 | ₹1.3 Cr | L4 | Rejected-AOC NOT L1 |
| 5 | L5₹1.3 CrRejected-AOC PLOT NO 1134 1196 MORIVALI VILLAGE TAL AMBARNATH DIST THANE AMBERNATH 421505 | AMBERNATH | THANE | MAHARASHTRA | 421505 | ₹1.3 Cr | L5 | Rejected-AOC NOT L1 |
| Sl No | Description | Qty | Unit | BRITE INDUSTRIES L10 | AIRFRAME L2 | R J ENTERPRISES L9 | sapana enterprises L7 | Chakshu Enterprise L6 | Pioneer Enterprises L4 | Shree Ayyappa Engineering L3 | pk Enterprises L8 | shakti engineering and electrical works L5 | DURGAI ELECTRICALS L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00Carrying out non- COMPREHENSIVE annual maintenance of 4x 450 TR and 1x 150 TR water chiller plant by approved OMC (original manufacturing company i.e. DAKIN) including following routine work . | |||||||||||||
| 1.01i) Inspecting the machine 4 times a year in equal quarters. During this inspection the following work will be carried out: ii) Check oil Level in the compressor. iii) Check liquid sight glasses to determine ,if there is a refrigerant shortage. iv) Checking of microprocessor logic operation. v) Inspecting the unit for leaks with a soap solution. vi) Inspect entire system for any unusual conditions such as noise, vibration, etc. vii) Check the system operating pressure and temperatures to ensure proper operating conditions. vii) Check Evaporator and condenser approach. viii) Check chilled water flow by checking pressure drop across the chiller. ix) Inspect all safety controls and adjust if required. x) Inspect all operating control and sequence of operation. Xi)Review daily operating log maintained by Customers operating personnel and instruct operating engineer as required. xii) Report to Customer in writing on any detected deficiencies, and if requested, issue estimate to make repairs. xiii) Topping of Refrigerant and Oil if required. (supply of Refrigerant and Oil not included. xiv)Yearly adjustments of controls if required. xv) All maintenance and repair work covered by this agreement will be scheduled by DAIPL and performed during regular working hours, seven (7) days per week, holidays and weekends excepted. Service will be available at other times at an additional overtime cost of one and half (1-1/2) times the normal hourly rate. xvi) Spares will be replaced on extra chargeable basis in case required. xvii) Informing the operating personnel of changes or adjustments made and recommending to them improvements in trouble free operation of the plant. xviii) Imparting operational training to your operating staff at the beginning of contract | |||||||||||||
| 1.02 | Chiller Unit 450 TR Model No. SAAEA7CH4WAMMA | 3 | Each Job | 62,000 ₹1.9 L | 50,000 ₹1.5 L | 65,000 ₹1.9 L | 59,500 ₹1.8 L | 59,500 ₹1.8 L | 60,000 ₹1.8 L | 55,000 ₹1.6 L | 65,000 ₹1.9 L | 59,000 ₹1.8 L | 40,000 ₹1.2 L |
| 1.03 | Chiller Unit 450 TR Model No. SAAEA7CH4WAMMA | 3 | Each Job | 62,000 ₹1.9 L | 50,000 ₹1.5 L | 65,000 ₹1.9 L | 59,500 ₹1.8 L | 59,500 ₹1.8 L | 60,000 ₹1.8 L | 55,000 ₹1.6 L | 65,000 ₹1.9 L | 59,000 ₹1.8 L | 40,000 ₹1.2 L |
| 1.04 | Chiller Unit 450 TR Model No. SAAEA7CH4WAMMA | 3 | Each Job | 62,000 ₹1.9 L | 46,000 ₹1.4 L | 65,000 ₹1.9 L | 59,500 ₹1.8 L | 59,500 ₹1.8 L | 60,000 ₹1.8 L | 55,000 ₹1.6 L | 65,000 ₹1.9 L | 59,000 ₹1.8 L | 40,000 ₹1.2 L |
| 1.05 | Chiller Unit 450 TR Model No. SAAEA7CH4WAMMA | 3 | Each Job | 62,000 ₹1.9 L | 45,000 ₹1.4 L | 65,000 ₹1.9 L | 59,500 ₹1.8 L | 59,500 ₹1.8 L | 6,000 ₹18,000 | 55,000 ₹1.6 L | 65,000 ₹1.9 L | 59,000 ₹1.8 L | 40,000 ₹1.2 L |
| 1.06 | Chiller Unit 450 TR Model No. PFS1701DBRYV | 3 | Each Job | 62,000 ₹1.9 L | 25,000 ₹75,000 | 65,000 ₹1.9 L | 59,500 ₹1.8 L | 59,500 ₹1.8 L | 6,000 ₹18,000 | 55,000 ₹1.6 L | 65,000 ₹1.9 L | 59,000 ₹1.8 L | 30,000 ₹90,000 |
| 2.00Supply and replace the following defective / worn out spares / controls for the chiller Plant all as specified and as directed. | |||||||||||||
| 2.01 | Pressure transducer - Low pressure / High Pressure / Oil pressure up to 10 Kg / cm2 | 2 | Each | 44,005 ₹88,010 | 31,000 ₹62,000 | 44,010 ₹88,020 | 45,000 ₹90,000 | 45,000 ₹90,000 | 42,000 ₹84,000 | 41,000 ₹82,000 | 42,000 ₹84,000 | 44,010 ₹88,020 | 30,800 ₹61,600 |
| 2.02 | Temperature sensor suitable for the chiller unit. | 2 | Each | 18,012 ₹36,024 | 16,500 ₹33,000 | 18,020 ₹36,040 | 19,000 ₹38,000 | 19,000 ₹38,000 | 19,000 ₹38,000 | 15,000 ₹30,000 | 19,000 ₹38,000 | 18,010 ₹36,020 | 15,000 ₹30,000 |
Tender Value
₹1.3 Cr
EMD Value
₹2 L
Closing Date
20 Jan 2026, 6:00 pmClosed
Col Saikat De CWE (Navy) Vasco
CWE (Navy) Vasco
COMPREHENSIVE MAINTENANCE OF AIR CONDITIONING PLANTS LOW PRESSURE AIR DRYER SYSTEM FIRE FIGHTING SYSTEM AND REPLACEMENT OF HIGH MAST LIGHT TOWER LIGHT AT PIER 2 AND PIER 5 UNDER GE SB KARWAR
2025_MES_745864_1
86045
Open Tender
Electrical and Maintenance Works
330 days
Karwar
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,000
GE (SB) Karwar
₹2 L
Yes
24 Feb 2026
23 Dec 2025
22 Jan 2026
23 Dec 2025
20 Jan 2026
13 Jan 2026
Carrying out non- COMPREHENSIVE annual maintenance of 4x 450 TR and 1x 150 TR water chiller plant by approved OMC (original manufacturing company i.e. DAKIN) including following routine work .
i) Inspecting the machine 4 times a year in equal quarters. During this inspection the following work will be carried out: ii) Check oil Level in the compressor. iii) Check liquid sight glasses to determine ,if there is a refrigerant shortage. iv) Checking of microprocessor logic operation. v) Inspecting the unit for leaks with a soap solution. vi) Inspect entire system for any unusual conditions such as noise, vibration, etc. vii) Check the system operating pressure and temperatures to ensure proper operating conditions. vii) Check Evaporator and condenser approach. viii) Check chilled water flow by checking pressure drop across the chiller. ix) Inspect all safety controls and adjust if required. x) Inspect all operating control and sequence of operation. Xi)Review daily operating log maintained by Customers operating personnel and instruct operating engineer as required. xii) Report to Customer in writing on any detected deficiencies, and if requested, issue estimate to make repairs. xiii) Topping of Refrigerant and Oil if required. (supply of Refrigerant and Oil not included. xiv)Yearly adjustments of controls if required. xv) All maintenance and repair work covered by this agreement will be scheduled by DAIPL and performed during regular working hours, seven (7) days per week, holidays and weekends excepted. Service will be available at other times at an additional overtime cost of one and half (1-1/2) times the normal hourly rate. xvi) Spares will be replaced on extra chargeable basis in case required. xvii) Informing the operating personnel of changes or adjustments made and recommending to them improvements in trouble free operation of the plant. xviii) Imparting operational training to your operating staff at the beginning of contract
Chiller Unit 450 TR Model No. SAAEA7CH4WAMMA
Chiller Unit 450 TR Model No. SAAEA7CH4WAMMA
Chiller Unit 450 TR Model No. SAAEA7CH4WAMMA
Chiller Unit 450 TR Model No. SAAEA7CH4WAMMA
Chiller Unit 450 TR Model No. PFS1701DBRYV
Supply and replace the following defective / worn out spares / controls for the chiller Plant all as specified and as directed.
Pressure transducer - Low pressure / High Pressure / Oil pressure up to 10 Kg / cm2
Temperature sensor suitable for the chiller unit.
Pressure relief valve
Gasket Partition Sr no M05
Valve-Ball 7/8 Sr-17307
Valve-Ball 1/8 Sr-17309
Valve Saloined 5/8 ODF
Expansion valve as per existing
Flow switch as per existing.
Material and labour for descaling of complete condenser units for central/ package type AC plant of capacity 450 TR by means of adding descaling chemical solution or equivalent in the cooling tower sump of required quantity and circulating the liquid to remove the scales inside the pipes and removing side covers of condenser, cleaning the water tubes by scrubbing with nylon brushes and flushing with fresh water, re fixing the covers, Inlet and out let pipes including replacement of neoprene rubber gasket etc. complete all as specified and directed by Engineer-in-charge
Material and labour for descaling of complete condenser units for central/ package type AC plant of capacity 150 TR by means of adding descaling chemical solution or equivalent in the cooling tower sump of required quantity and circulating the liquid to remove the scales inside the pipes and removing side covers of condenser, cleaning the water tubes by scrubbing with nylon brushes and flushing with fresh water, re fixing the covers, Inlet and out let pipes including replacement of neoprene rubber gasket etc. complete all as specified and directed by Engineer-in-charge
Repairing /servicing and overhauling the centrifugal pump by dismantling the pump coupled with induction motor, opening the pump, inspecting for defects and replacing the worn out parts like gland bush, bearings, gland bolts and nuts, gland packing, gasket, water seal etc including repairs to pump shaft by remetalling, grinding, polishing and reassembling the same and replacing the rusted nuts, bolts, washers etc and coupling with motor testing complete for the following capacity of pump all as specified and directed by Engr-in-charge.
(a) Primary chiller water pump capacity 300 USGPM of make -Xylum
(b) Primary chiller water pump capacity 900 USGPM of make-Xylum,
(c) Secondary chiller Pump 300 USGPM of make -Xylum
(d) Secondary chiller Pump 900 USGPM HP of make - Xylum
(e) Condenser Pump 450 USGPM of make Kirloskar, Xylum, Crompton
(f) Condenser Pump 1350 USGPM of make Kirloskar, Xylum, Crompton
Material and labour for taking out the centrifugal pump motor and transporting to work shop , split opening the motor removing the u/s burnt winding wire, cleaning the slots, re winding with super enameled copper conductor wire of suitable size including insulating materials, varnishing and drying and reassembling and transporting back to site , coupling with pump testing and commissioning all as directed for the following capacities of motors : -
(a) Primary chiller water pump motor cap 5.4 HP of make Kirloskar, Xylum, Shakti
(b) Primary chiller water pump motor cap15 HP of make Kirloskar, Xylum, Shakti
(c) Secondary chiller Pump motor cap 50 HP of make Kirloskar, Xylum, Shakti
(d) Secondary chiller Pump motor cap 150 HP of make Kirloskar, Xylum, Shakti
(e) Condenser Pump motor cap 30 HP of make Kirloskar, Xylum, Crompton
(f) Condenser Pump motor cap 40 HP of make Kirloskar, Xylum, Crompton
Dismantling the covers of cooling tower and the cooling fan blades from the position, electrical connections and taking down the cooling tower motor of capacity 30 HP, split opening the motor, removing the burnt out winding, cleaning the slots re winding with super enameled copper conductor wire of suitable size including insulating materials, varnishing and drying and reassembling and transporting back to site and testing on commissioning all as directed by Engineer -in Charge.
Dismantling the covers of cooling tower and the cooling fan blades from the position, electrical connections and taking down the cooling tower motor of capacity 11 HP, split opening the motor, removing the burnt out winding, cleaning the slots re winding with super enameled copper conductor wire of suitable size including insulating materials, varnishing and drying and reassembling and transporting back to site and testing on commissioning all as directed by Engineer -in Charge.
Supply and fix cooling tower fins as per existing size and shape during all as specified and directed
Descaling of cooling tower by dismantling the cooling tower fins removing the scales in the fins, sump by scrubbing with wire / nylon brush and refixing the fins in position including replacing the float valve for supply water line, painting the steel/wooden surfaces with two coats of enamel paint over a coat of zinc oxide primer and testing the cooling tower all as specified and as directed.
Supply and fill Gas R-134 a in cylinder for charging / topping up whenever required.
Material and Labour for leak testing of gas by evacaveting the gas by suitable means and filling with nitrogen gas for 24 hours rectifying the leakages with and including required material / brazing etc. and refilling gas testing chiller all specified and directed.
Supply and replace in repairs Motorized butter fly valve of dia 250 mm suitable for condensing /chiller water line with ISI marked including jointing with gasket ,nut, bolts washer all as specified by Engr-in- charge
Supply and replace in repairs Motorized butter fly valve of dia 150 mm suitable for condensing /chiller water line with ISI marked including jointing with gasket ,nut, bolts washer all as specified by Engr-in- charge
Supply and fix in replace in repairs Ball valve of dia 40 mm suitable for condensing /chiller water line with ISI marked including jointing with proper gasket ,nut, bolts washer all as specified by Engr-in- charge
Supply and fix in replace in repairs Ball valve of dia 25 mm suitable for condensing /chiller water line with ISI marked including jointing with proper gasket ,nut, bolts washer all as specified by Engr-in- charge
Supply and fill compressor oil for centrifugal compressor for toping up / replacement as required and all as directed.
Supply and fill the dosing chemical Corrosion/Scale Inhibitor INDION 7106 for dosing plant as required and all as directed. Make :Ion Exchange
Supply and fill the dosing chemical Corrosion/Scale Inhibitor INDION 9053 for dosing plant as required and all as directed. Make : Ion Exchange
Supply and fill the dosing chemical Corrosion/Scale Inhibitor INDION 5489 for dosing plant as required and all as directed. Make : Ion Exchange
Supply and fill the dosing chemical Corrosion/Scale Inhibitor INDION 5545 for dosing plant as required and all as directed.
Supply & fixing in replacement of water pressure gauge (0 to 16 Kg/cm2) as per existing
Supply& fixing in replacement of Temp gauge (0 to 100 deg Centigrade) as per existing.
Supply and fix in repair and replacement of Digital flow meter
S&F in replacement of following ball bearing (NDE/DE) suitable for cooling tower motor ,chiller motor, Blower motor, condenser motor etc removing of existing unserviceable bearing of any type or make all as directed by Engr-in-charge.
Supply and fix in replacement MCCB of following capacities
(a) 630 A TP 50 KA Adjustable type 415V AC
(b) 400A,TP.415V,50 Hz, 36 KA adjustable type
(c) 250A,TP.415V,50 Hz 36 KA adjustable type
(d) 125A,TP.415V,50 Hz 36 KA adjustable type
(e) 100A,TP.415V,50 Hz,16KA adjustable type
(f) 160A,TP.415V,50 Hz,36KA adjustable type
(g)63A,TP,415V,50Hz,16KA adjustable type
Supply and fix in replacement of Power contactor AC-3 of Aux voltage 230V
(a) MNX 95-TP of rating 95A,
(b) MNX 80-TP of rating 80A,
(b) MNX 75 -TP of rating 80A,
(c) MNX 25-TP of rating 25A,
(d) MNX 265 -TP of rating 265 A,
Supply and fix in replacement of over load relay with inbuilt single phase protection of following capacities
(a) MN5 of rating 20-33A
(b) MN5 of rating 14-23A
(c) MN12 of rating 28-46.5 A
(d) TA200DU 135 A
Servicing of existing installed VFD as per manufacturer's standard and testing complete as per specified and directed
Painting of 450 TR capacity existing cooling tower with existing color all as per directed and specified.
Supply and replacement and testing of GM gate/ globe valve heavy duty confirming to IS-778 with iron wheel head screwed both end for 50 mm or size as per existing complete all as specified and directed.
Supply and fix in replacement MCB of following capacities
(a) 6A to 32 Amp ,SP,240V,50Hz,10 KA C curve
Supply Erecting testing and commissioning in repair O closed cell elastomeric nitrile rubber with aluminum foil laminated on one side, having thermal Temperature, of 20 c as per EN 12667, moisture diffusion resistance factor or u Value of minimum 7000 for base insulation material without the foil as per EN 12086, fire performance such that it passes Class 1 as per BS476 Part 7 for surface spread of flame and also fire performance of V0, HB as per UL 94, 1996, density without the foil between 40 to 55 KG/ Cum. the insulation material shall be FM ( factory Mutual) USA approved and dust & fiber free. the Aluminium foil shall be 60 microns thick and its weight shall be 193 gms as per EN ISO 2286-2, tensile strength 90 N/ 15 mm as per EN ISO 527-3 with elongation>10% as per EN ISO 527-3. All complete as specified in particular specification 19 mm thick thermal insulation as directed.
Repair to Microprocessor based control panel display unit for 450 TR AC chiller unit including spare parts
Repair to Microprocessor based control panel display unit for 150 TR AC chiller unit including spare parts
Preventive Maintenance of ELGi Air Compressor system by approved OMC (original manufacturing company i.e. ELGI) including following routine work .ELGi Air Compressor Qty- 03 ( Four Visit every Compressor) MODEL - OF300AE
Preventive Maintenance of Air dryer system by approved OMC (original manufacturing company i.e. ELGI) including following routine work .Air Dryer Qty- 02 ( Four Visit every Air Dryer)
Scope of work Note - item No 1 & 2 Check and ensure the oil level and quality of oil i) Check and ensure there is no air and oil leakage in the compressor package ii) Check, clean and change the air filter as required iii) Change oil and oil filter at recommended intervals iv) Check and replace the oil separator element at recommended intervals v)Check and replace the drive coupling element if required vi) Check and ensure the operation of the safety valve against the set pressure vii) Check and ensure all the quick coupling fitting and flexible hoses are intact viii) Check and ensure the proper functioning of all the valves in the compressor package and replace the service kits if required. ix) Check and ensure the proper functioning of the auto drain valve and clean/change as required x) Check and ensure the proper functioning of all the safety switches xi) Check and ensure the proper functioning and condition of electrical contactors xii) Check and ensure the proper functioning of all safety interlocking devices xiii) Check the condition of the air end and main motor bearings by using SPM and remedial measures recommended once in year. xiv)Check the compressor operating environment and advise relevant recommendations for reliable operation of compressor. xv) Study and recommend upgrade kits if applicable xvi) Submit the Compressor Performance/Health Check Report once in a year Note: All the maintenance activities shall be carried out as per the
Carrying out Half yearly maintenance of ELGi Air Compressor system by approved OMC (original manufacturing company i.e. ELGI) including following routine work included Child part of 8000 hr consumable kit OA3. kit part No- 41240089
During this inspection the following Item will be carried out: ii) Air filter element OW4 iii) AIR OIL SEPERATOR SPINON . iv) KIT - AIR PIPING OA3 v) KIT IC MOS OA2 vi) KIT-LUBRICATION PIPING - OA3. vii) KIT-PIPE COUPLING OA3 vii) OIL FILTER ELEMENT-75 LPM viii) PANEL FILTER AV230
Supply and replacement of Low Pressure compressor ELGI AIRLUBE UT SYN PLUS 209 Ltr
Supply and Greasing of Low Pressure compressor GREASE- EM UNIREX N3
Supply and replacement in repair of Auto Drain Valve as per existing with ISI marked complete all as specified and directed.
Supply and replacement in repair of Motorized Butterfly Valve 100 mm in Air compressed line with ISI marked complete all as specified and directed. Make- SAMSOM Controls
supply and replacement in repair of Non Return Valve size 150mm in compressed line with ISI marked complete all as specified and directed.
supply and replacement in repair of Gate Valve size 150 mm in compressed line with ISI marked complete all as specified and directed.
supply and replacement in repair of Gate Valve size 100 mm in compressed line with ISI marked complete all as specified and directed
Supply and replacement in repair of Pre Filter 5 micron Element with ISI marked complete all as specified and directed.
Supply and replacement in repair of Pre Air Filter 1 micron Element with ISI marked complete all as specified and directed.
Supply and replacement in repair of After Air Filter 1 micron Element with ISI marked complete all as specified and directed.
Supply and replacement in repair of Differential pressure Valve (DP Valve) with ISI marked complete all as specified and directed.
Supply and replacement in repair of Pressure -Reducing valve (RP valve)with ISI marked complete all as specified and directed.
Supply and replacement in repair of Solenoid Valve 5/2 Way with ISI marked complete all as specified and directed.
Supply and fix in repair and replacement of Pressure Gauge with ISI marked complete all as specified and directed.
Supply and fix in repair and replacement of Temperature Gauge with ISI marked complete all as specified and directed.
supply and fix in replacement of Air Dryer Actuator as per existing with ISI marked complete all as specified and directed
Labour only for Non Comprehensive Routine maintenance checkup of Fire alarm system's error and alarms, necessary inspection of the Fire alarm system and take necessary corrected actions, resolve any issues regarding the system and take corrective actions for the problems , check connectivity and communication at all terminations, check all power sources and outlets used in the system complete for all panels all Fire alarm system at Pier-2 & Pier-5' with respective Tunnel Area by authorised service engineer of OEM and furnish the report to Engineer-in-charge.
(a) All as per above item No 1 but for CWP-03 at Naval Base karwar
(b) All as per above item No 1 but for UC-02 at Naval Base karwar
(c) All as per above item No 1 but for 5 SS at Naval Base karwar
(d) All as per above item No 1 but for SWP- 02 at Naval Base karwar
(e) All as per above item No 1 but for Pier-5 with Lower Deck at Naval Base karwar
(f) All as per above item No 1 but for 2 SS at Naval Base karwar
(g) All as per above item No 1 but for Pier-2 with lower Deck at Naval Base karwar
Material and labour in repair 4 zone fire Suppression system Panel with 6 hours battery back up, detector circuit monitored for open circuit, short circuit and 4 zone panel including 2 No 12V,7 AH dry rechargeable battery etc complete all as specified and directed by Engineer-in-Charge.
Supply & installation in repairs of Hooter/Sounder cum strobe along with required accessories complete all as specified and directed by Engineer-in-charge.
Supply & installation in repairs of Addressable Smoke detector along with required accessories complete all as specified and directed by Engineer-in-charge.
Supply & installation in repairs of Addressable Manual Call Point along with required accessories complete all as specified and directed by Engineer-in-charge.
Supply & Laying in repairs of 2 Core 1.5 Sq mm Copper Flexible Cable for control wiring with & including copper lugs, connectors etc complete all as specified and directed by Engineer-in-charge.
Supply & Fix in repairs lead acid type battery of 12 Volts 7 AH capacity complete all as specified and directed .
Supply and installation in repair of MCP Glass only complete all as specified and directed
Supply and installation in repair of mother board of Fire Alarm control panel complete all as specified and directed
Supply and installation in repair of Power supply of Fire Alarm control panel complete all as specified and directed
Supply & installation of Addressable Multi Sensor detector along with required accessories complete all as specified and directed by Engineer-in-charge.
Supply & installation in repairs Zone control Valve along with required accessories complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair and replacement of Signal Butter fly valve complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair and replacement of Water flow indicator complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair and replacement of Pressure gauge complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair and replacement of Drain Valve as per existing Zone control valve
Supply & installation in repairs Water Curtain Nozzle along with required accessories complete all as specified and directed by Engineer-in-charge. Make HD Fire /Honeywell or Equivalent.
Supply and fix in repair Fire sprinkler Pendent 68 Degree temperature rating pendent type complete all as specified and directed by Engineer-in-charge
Supply & installation in repairs Deluge Valve along with required accessories complete all as specified and directed by Engineer-in-charge.
S&F in repairs hose box made of 18 gauge MS Sheet 800mm X 750mm X 300 mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and inside yard complete all as specified and directed.
Supply and fix in repair Branch pipe gun metal 63 mm instantaneous inlet, made threaded outlet, 15mm bore nozzle short complete all as specified and directed by Engr-in-charge.
Supply and fix gun metal Double headed hydrant landing valve of 63 mm dia with instantaneous coupling complete all as specified and directed by Engr-in-charge.
Material and labour RRL hose type A 15 m length and 63 mm dia, non-percolating type conforming to IS 636 complete all as specified and directed by Engr-in-Charge
Supply and fix in repair and replacement of Double headed Hydrant Valve complete all as specified and directed.
Supply and fix in repair and replacement of Butterfly Valve of size 100 mm dia complete all as specified and directed.
Supply and fix in repair and replacement of Butterfly Valve of size 80 mm dia complete all as specified and directed.
Supply and fix in repair and replacement Tango XL -BVP485 LED Floodlight 400 Watt @ 48K Lm IP 66/IK08 on 60 meter High Mast pole, class B serviceability Pressure Die casting Optical Covers Exposed Lens Optics Polycarbonate housing Anti dust exposed Lens 120Lm/W efficacy with high power surge 4KV Internal and 20KV External with Driver protection 440 V (P2P) protection for 8 hr and operating Voltage 120-277 volt complete in all respect all as specified and directed by Engineer-in-charge.
Supply and fix in repair and replacement AMAZE BJFL 350 LED ME WH Floodlight 350 Watt @ 42K Lm IP 66/IK08 on 30 meter High Mast pole, class B serviceability Pressure Die casting aluminium frame with heat resistant toughened clear glass 120Lm/W efficacy 5700k Color temperature with high power surge 4KV Internal and 10KV External with Driver protection 440 V (P2P) protection for 8 hr and operating Voltage 120-277 volt complete in all respect all as specified and directed by Engineer-in-charge.
Supply and fix in repair and replacement AMPL F 480L LED WH- NB- A3 TG SD Floodlight 400 Watt @ 48K Lm IP 66/IK08 on 30 meter High Mast pole, class B serviceability Pressure Die casting aluminium frame with heat resistant toughened clear glass 120Lm/W efficacy 5700k Color temperature with high power surge 4KV Internal and 10KV External with Driver protection 440 V (P2P) protection for 8 hr and operating Voltage 120-277 volt complete in all respect all as specified and directed by Engineer-in-charge.
Supply and fix in repair and replacement of 100 Amp Four Pole 10KA MCCB complete all as specified and directed by Engineer-in-charge
Supply and fix in repair and replacement of 70/63 Amp Three Pole Power contactor with 230V AC, Add on 1NO+1NC contact complete all as specified and directed by Engineer-in-charge
Supply and fix in repair and replacement of 9 Amp Three Pole Power Contactor with 1NO Contact, Coil Voltage : 230V AC, Add on 2NC contact complete all as specified and directed by Engineer-in-charge
Supply and fix in repair and replacement of Fm1 / Quartz Daily Time Switch, 240V AC, Flush Mounting complete all as specified and directed by Engineer-in-charge
Supply and fix in repair and replacement of Illuminated Push button with element for Raise (Green) & Lower (Green) complete all as specified and directed by Engineer-in-charge
Supply and fix in repair and replacement of Phase Indicating Lamp R (Red), Y (Yellow), B (Blue) complete all as specified and directed by Engineer-in-charge
Please Enable Macros to View BoQ information
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
86045Tender.pdf
Tender Documents • 0.82 MB
BOQ_835171.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid