Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.6 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹25.2 L+₹62,015 (2.52%)Rejected-Finance | L2 | Rejected-Finance Unsuccessful bidder | |
| 3 | L3₹26.9 L+₹2.3 L (9.21%)Rejected-Finance | L3 | Rejected-Finance Unsuccessful bidder | |
| 4 | L4₹27.2 L+₹2.6 L (10.7%)Rejected-Finance C O PULOKE NEOGI SURYA SEN PALLY PO KADAMTALA 734011 DIST DARJEELING WB | KADAMTALA | DARJEELING | WEST BENGAL | 734011 | L4 | Rejected-Finance Unsuccessful bidder | |
| 5 | L5₹28.5 L+₹3.9 L (16.0%)Rejected-Finance 16 APC SARANI WARD NO 30 DESHBANDHUPARA PO SILIGURI TOWN DIST DARJEELING PIN 734004 WB | SILIGURI | DARJEELING | WEST BENGAL | 734004 | L5 | Rejected-Finance Unsuccessful bidder |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
5 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Bagdogra
GE AF Bagdogra Bagdogra Airport PO, Dist Darjeeling, WB - 734421
PROVISION OF 01 NO OF BOREWELL ALONG WITH ALLIED WORK AT PUMP HOUSE NO 14 AT 20 WING AF STN UNDER GE (AF) BAGDOGRA
2023_MES_599839_1
8509/E8
Open Tender
Civil Works - Water Works
Item Rate
180 days
GE AF Bagdogra
As per NIT
8 documents required · 8 mandatory
₹500
GE AF Bagdogra
₹48,000
Yes
7 Oct 2023
14 Jun 2023
6 Jul 2023
14 Jun 2023
5 Jul 2023
28 Jun 2023
Amount
Drilling and development of bore hole for 200x150mm tube well by reverse rotary circulation method rig machine 24 inch bore size top or bottom by different cutters including all arrangement with appliances and excavation suitable size of pit for clay for circulation of water using bentonite or silty clay as per site/ soil condition for settlement of bore hole from ground level to 30 meters depth complete all as specified and directed.
All as per item No 01 above, but for depth exceeding 30 meters but not exceeding 60 meters.
All as per item No 01 above, but for depth exceeding 60 meters but not exceeding 90 meters.
All as per item No 01 above, but for depth exceeding 90 meters but not exceeding 130 meters.
All as per item No 01 above, but for depth exceeding 130 meters but not exceeding 150 meters.
Electrologing test with using suitable equipments for the bore hole before sinking/lowering of pipes, filters etc for assessing proper delineation of water from Govt recognized agency/Govt firm and report shall be submitted to GE for approval.
Supply, lowering, assembling and fixing, 200mm dia bore, ERW, heavy duty MS housing pipe of 7mm wall thickness, plain ended arc weld butt joint with heavy duty collar and 20x4mm mild steel flat iron centre guide (04 Nos each joint) complete all as specified and as directed.
Supply, lowering, assembling and fixing in position 150mm dia bore ERW heavy duty MS black casing pipe of 6.35mm wall thickness plain ended arc weld butt joint with heavy duty collar and 20x4mm mild steel flat iron centre guide (04 Nos each joint) complete all as specified and as directed.
Supply and lowering & fixing in position 150mm dia bore slotted pipe MS strainer of wall thickness 6.35mm welded with MS pipe and heavy duty collar and welded centre guide MS flat iron 20x6mm complete all as specified and as directed by Engr-in-Charge.
Supply and fixing in position by welding, heavy duty MS reducer 200x150mm of wall thickness 7mm and 20x4mm MS flat iron centre guide 02 Nos complete all as specified and as directed.
Supply, lowering, assembling and fixing in position Each 150mm dia bore heavy duty bail plug 3 meter long ERW Job MS pipe of 6.35mm and cover with 6mm plate duly welded complete all as specified and as directed.
Supply and packing pea size washed gravels surrounding between assembly of pipes and bore holes, top to bottom using 3mm to 8mm size gravel complete all as specified and as directed.
Supply and fixing well cap in two parts made out of mild steel plate for covering 200mm bore of tube well, central arrangement, duly welded with locking arrangement, making holes for passing 100mm dia column pipe and 2 run of 6 Sqmm flat submersible cable complete all as specified and as directed.
Supply and fixing housing clamp made out of 100mmx12mm thick and 700mm long flat iron for casing pipe of size 200mm including necessary nuts, bolts and washers complete (two half piece) all as specified and as directed.
M&L for development of tube well with air compressor of capacity up to 300 PSI till sand/mud/silt-free water of potable quality is obtained complete all as specified. (Air Compressors, Diesel Engine, Pump & Fuels tec shall be arranged at site by the contractor & cost for the same is deemed to be included in the quoted rate). Note:- Total development period shall be upto a period of 48 hours excluding 2 hours rest period after every 8 hours.
M&L for development of tube well by 25% over pumping using suitable engine driven pump after completion item 15 above all as specified. Note:- Diesel Engine, Pump & Fuels etc shall be arranged at site by the contractor & cost for the same shall be deemed to be included in the quoted rate.
M&L for yield testing for the tube well by using diesel engine pump with minimum discharging 10000 Gallon per Hours and vertical test, draw down test, log chart of tube well, yield test report, water test report as per IS (from National Test House, Kolkata) and strata sample box (2nd Class Hard Wood) with glazed shutter and pigeon holes for depth sample complete all as specified and directed. Note:- Testing equipments sample water testing, Diesel Engine, Pump & Fuels etc shall be arranged at site by the contractor & cost for the same is deemed to be included in the quoted rate.
Supply, install, testing and commissioning of three phase borewell submersible pump sets suitable for borewell water, 380 Volts, AC 50Hz of undermentioned specifications: (i) Motor - 12.50 HP with maximum efficiency. (ii) Pump - 6 Stage, Head - 69m min 116m max. (iii) Discharge - 150LPM min 500LPM max, (iv) Cast Iron Pump Bowls Diffuser Casing, stainless Steel Pump Shaft, Bronze Impeller etc. all as specified. Make: Kirloskar/ Texmo/ KSB or equivalent as in the list of makes. Note:- The details specifications of the Pump Set such as stage, head, discharge may be changed after getting proper yield of the tube well and contractor is bound to provide the pump set of amended specifications without any extra cost. Nothing extra is admisible for the same.
Supply, Lowering & fixing MS column pipe including fittings complete of nominal dia of 80mm bore heavy duty (each piece of 3 mtr length) both end flanged and fixed through nuts, bolts, washers, leather gasket including painting with two coats of black bituminous paints externally and internally complete all as specified and directed. Note:- Flange should suitably grooved for passing submersible cable & rope.
Supply, connecting & fixing of PVC insulated PVC sheathed 3 core flat copper cable of size 6 sqmm, 1100 V grade conforms to IS 694:1990 without any joint complete all as specified and directed.
Supply, lowering & fixing 8.0mm dia flexible PVC layered steel rope for holding submersible pump inside the casing pipe and fixed outside at the mid of MS channel with provision of 01 No pully complete all as specified and directed.
M&L for Hydrological Studies and Geophysical Resistivity Survey (Vertical Electrical Sounding) at four locations within the proposed tube well location with a maximum current electrode separation 400m to determine the possibility and pinpoint location of the tube well from Govt approved agency complete all as specified and directed. Note:- If there is no possibility of the tube well by Hydrological studies and Geophysical Resistivity Survey (Vertical Electrical Sounding) in the proposed site, the relevant items or schedules should not to be executed.
Testing of water for all parameters chemical and bacteriological aspect from any Govt approved/recognized lab as approved by the GE complete all as specified and directed.
S&F 150mm bore CI Sluice valve PN - 1.0 IS 14846-2000 with Spindle Iron (Heavy duty) Wheel head and both ends flanged and MS nut bolts and washers and pair of rubber/fiber gasket and fixed in position complete all as specified having Body & Wedge Rings - Bronze IS : 318 Gr. LTB2. Spindle:- SS IS: 6603 Gr. 12Cr12. Gland packing : Greasy Jute Packing. Flange Drilling - IS 1538, Table 4 & 6 complete all as specified and directed.
S&F 100mm bore CI Sluice valve PN - 1.0 IS 14846-2000 with Spindle Iron (Heavy duty) Wheel head and both ends flanged and MS nut bolts and washers and pair of rubber/fiber gasket and fixed in position complete all as specified having Body & Wedge Rings - Bronze IS : 318 Gr. LTB2. Spindle:- SS IS: 6603 Gr. 12Cr12. Gland packing : Greasy Jute Packing. Flange Drilling - IS 1538, Table 4 & 6 complete all as specified and directed.
S&F Non return valve, cast iron, both ends flanged, 100mm bore and all nuts, bolts, washers, gaskits etc. including dismantling of old unserviceable valve complete and removal to MES store yard complete all as directed by Engr-in-Charge.
M&L for construction of valve chamber in replacement 1200x1200x1200mm inernal dimensions, 6mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230mm thick, PCC bed (1:4:8), type D2, 150mm thick, cement plastering, finishing 15mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceable valve pit remains all as specified at site.
M&L for construction of valve chamber in replacement 900x900x900mm internal dimensions, 6mm thick MS sheep cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230mm thick, PCC bed (1:4:8), type D2, 150mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceable valve pit remains all as specified at site.
Cutting of existing pipeline and reducing to required length in position for inside of a new PPR tee size, 160x 160 x 110mm branches to 160 MM, dia bore as per direction of Engineer-in-Charge.
S&F CI Tee of size 150x150x 100mm complete all as specified and directed.
S&F lead joint for 150 mm dia pipe complete all as specified and directed.
S&F CI venturi 100 MM dia in required length, including welding, flange to connect filter Plant complete all as specified and directed.
S&F 100 MM dia MS pipe medium grade with all fittings for IRP inlet/outlet, connection, cutting and making threats, inserting friends, connect sons with nut bolt and required accessories complete all as specified and directed.
M&L for 100mm thick PCC 1:2:4, type B1 (using 20mm graded stone aggregate) 100mm thick as in path/ hardstanding complete all as specified and directed.
BUILDERS ASSOCIATE
HALDER ENTERPRISERS
SHRI P P SHARMA
SUNIL DAS AND CO
M/s Prakash Traders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .