R.I. office cum res at Subalaya_building

Clearing and grubbing road land including uptooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposalof top organic soil not exceeding 150 mm in thickness.

Earth work in excavation of foundation in hard soil within the initial lead and lift including dressing and levelling the bed and depositing the excavated materials away from the work site etc. all complete as directed by the(For Shed Column,New CC area,CC road,Gate Column)

Filling foundation and plinth with sand well watered and rammed including all cost, carriage, royality, taxes and all labour, T & P etc. all complete as per the direction of Engineer-in- charge.(For Shed Column,New CC area,CC road,Gate Column)

Cement concrete (1:3:6) using 40mm HG metal including all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in - charge.(For Shed Column,New CC area,CC road,Gate Column)

Providing C.C. (1:2:4) using 12mm size hard granite crusher broken chips including all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of Engineer- in - Charge.(For Shed Column,New CC area,CC road,Gate Column)

Finishing walls with weather coat of approved shade on new work one coat over a coat of primer to give an even shade including cost of all materials, labour charges, T&P etc required for the work complete. . as per direction of the Engineer-in-charge. (Ground Floor)

First floor

2nd floor

Dismantling and removing doors , windows and ventilators including removal of frames.(Gate)

Providing , fitting & fixing Steel Angle Iron doors & windows frame with M.S grill manufactured from standard rolled steel angle section 50 mm X 50 mm X 6 mm cornered of the frame duly metered and electrically welded with fish tail hold fasts made out of M.S flats of size 200 mm X 50 mm X 30 mm wide & 5 mm thick at the rate of 4 nos per frame with M.S hinges of size 75 mm & 14 SWG thick at the rate of 3 nos for each single leaf shutter tower bolt ring & M.S Grills made out of 19 mm x 5 mm flat properly welded to the window frame with one coat of anti corrosive red oxide zinc chrome primere as per direction of Engineer - in - Charge including 1 % cess.(Gate)