Electrification of Railway Buildings inside plant

Amount

Supply Part

11/11 KV(UE) Grade,3x120 sqmm Al XLPE Stranded Compacted Circular Aluminium Conductor, Conductor Screen of Extruded Semi-Conducting Compound, Extruded XLPE Insulated, Insulation Screen of Extruded Semi-Conducting Compound, Metallic Screening of Copper Tape (Earth Fault Current of Metallic Screen- 0.2 KA for 1 sec. per core), Cores Laid up, Extruded FR-LSH PVC Type ST-2 Inner Sheathed, Galvanised Steel Flat Strip Armoured and Overall Extruded FR-LSH PVC Type ST-2 Outer Sheathed Power Cable Confirming to IS 7098 P-2.. (Kindly note that single cable length is not below 1000m)

11KV straight through cable jointing with heat shrinkable jointing kit of 120 sqmm size cable

11KV outdoor cable jointing with heat shrinkable jointing kit of 120 sqmm size cable

11KV indoor cable jointing with heat shrinkable jointing kit of 120 sqmm size cable

Cable Route Marker

HDPE Pipe 140mm O/D PN-4, PE-80 Grade UV Stabilized for 11 kV cable underground etc. road crossing.as per NBC/CPWD guidelines.

GI Pipe 6"dia

3.5 Corex240 sq. mm 1.1 KV XLPE armoured(Galvanised steel wire/strip) LT cable as per IS:7098 P-1 (In single length run)

3.5 Corex50 sq. mm 1.1 KV XLPE armoured(Galvanised steel wire/strip) LT cable as per IS:7098 P-1 (In single length run)

3.5 Corex35 sq. mm 1.1 KV XLPE armoured (Galvanised steel wire/strip) LT cable as per IS:7098 P-1 (In single length run)

3.5 Corex25 sq. mm 1.1 KV XLPE armoured (Galvanised steel wire/strip) LT cable as per IS:7098 P-1 (In single length run)

320 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect.

800 K.V.A., 11/0.433 K.V., “ENERGYEFFICIENT”, (Level-2), i.e. Level-1(Amendment 4) Copper Wound, Out-door,Delta-Star, Oil Immersed Transformer Off-LoadTap Changer, as per B.I.S. 1180 (Part-1) 2014Specifications

ST Pole 11 Mtr IS-410 SP-55

Stone pad 300x300x75mm

LT Clamp with bolt & nut(for shackle insulator use in S.T. Pole)

Earth wire clamp hook,nuts &bolts for ST pole

LT Shackle Insulator

Bolts & Nut for shakle insulator

X-arm M.S. Angle 65x65x6mm V Type for ST pole

Cross arm holding clamp with nut & bolt for ST pole

11KV Pin Insulator

11KV Pin with nut

E/F Bracket with clamp, nut, bolt for ST pole

Loop guard complete 3-Phase,and one phase for lighting

ACSR Racoon conductor

ACSR weasel conductor

G.I. earth wire 5MM 6 SWG

G.I. earth wire 4MM 8 SWG

Aluminium binding wire

Jointing sleave for ACSR Racoon, weasel

Spacer LT PVC

11KV DISC INSULATOR(B&S type) WITH FITTING

Earthing Complete (MS earthing rod of 20x2500 mm,SWG 6 earth wire,etc.)

Stay Set complete(GI stay rod (16x1800mm, stay clamp,11kv stay insulator,stay wire 7/10 SWG approx 5 kg), etc.)

Danger board with clamp

Aluminium paint

Red paint

Red Oxide

Guarding angle(MS angle 65x65x5mm/2.21 M long) with clamp, nut, bolt

Top channel 125x65x2240mm

Dropper channel 100x50x2028mm for cable supporting

clamp for channels with nut & bolts

P.G. Clamp

Number plate with clamp

11KV TPMO with polymer insulator complete

3-Phase D. O. Fuse Set complete

MS angle Iron 65x65x6mm,2700 mm Long bracing Complete with 4 clamps

T-off Channel 100x50x1300mm with Clamp nut& bolt

Guarding X-arm(MS Angle 65x65x6mm/3.300 Mtr Long 5.8 kg/Mtr with Clamp and nut & bolts

11 kv Lightening arrestor

Erection Part

Laying of HT/LT cable in Cable Tressle with fixing with MS flat clamps as required alongwith cable tags at every 40mtr

Laying of HT/LT cable in direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required, and fixing cable route marker as required.

Straight through cable joint for 3x120 sqmm XLPE cable

Indoor type cable termination for 11kv 3x120 sqmm

Outdoor type Cable termination for 11 kv 3x120 sqmm

Fixing of 320 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect.

Making of end termination with brass compression gland and aluminium lugs of 3.5C X35 Sqmm PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade , Al lugs and gland to be supplied by the contractor at his own cost.

Making of end termination with brass compression gland and aluminium lugs of 3.5C X50 Sqmm PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade , Al lugs and gland to be supplied by the contractor at his own cost.

Making of end termination with brass compression gland and aluminium lugs of 3.5C X240 Sqmm PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade , Al lugs and gland to be supplied by the contractor at his own cost.

Earthing work, burring of Safe Earthing Electrode T-39 Cu Copper Coated, Length up to 3000mm, outer pipe 76.3mm x 3.2 inner pipe 42.4mm x 2.6mm, terminal Dia12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC)capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25 mmx 3mm Strip will be extra). Make: As approved in U.P. P.W.D., & C.P.R.I. Certified, all required material to be supplied by Contractor at his own cost.

Earthing work, burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot DipGalvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC)capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified, all required material to be arranged by the contractor at his own cost.

Laying of 25mm x 3mm. G.I. strip for earthing purpose as required complete in all respects. all required material GI strip etc.to be arranged by the contractor at his own cost.

Fixing of one number 8 SWG G.I. wire in 15mm dia G.I. pipe for earthing, laid in ground or in wall duty concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. all required material GI wire etc. to be arranged by the contractor at his own cost.

Fixing of 25mm x 5mm Copper strip for earthing purpose as required.all required material Copper strip, etc.to be arranged by the contractor at his own cost.

shifting of 11/.43 KV ,800KVA T/F,miscellaneous expenditure etc.

Construction of T/F plinth as per respo norm with all cost of labour T&P and material required for proper completion of work.

FRP/MS strip(50x6mm) Fencing of 11/.43 KV (Sub-Station size-3x3 m(6 ft height including civil work) )as per respo specification and all required material to be arranged by contractor at his own cost.

Body Earthing of T/F as per Respo specification with all cost of labour T&P and material etc required for proper completion work

Erection of ST Pole 11 Mtr IS-410 SP-55

Stone pad 300x300x75mm

LT Clamp with bolt & nut for S.T. Pole

Earth wire clamp with nuts &bolts for ST pole

LT Shackle Insulator

Bolts & Nut for shakle insulator

X-arm M.S. Angle 65x65x6mm V Type with clamp

Cross arm holding clamp with nut & bolt for ST pole

11KV Pin Insulator with pin & nut

E/F Bracket with clamp,nut,bolt

Loop guard complete 3-Phase,and one phase for lighting

ACSR weasel/Racoon conductor

G.I. earth wire 4,5MM 6/ 8 SWG

Aluminium binding wire

Jointing sleave for ACSR Racoon, weasel

Spacer LT PVC

11KV DISC INSULATOR WITH FITTING

Earthing Complete

Concreting of 11 Mtr STP pole

Fixing and Grauting of stay set complete

Danger board with clamp

Aluminium/Red paint

Red Oxide

Fixing of Gaurding angle with clamp

MS top channel 125x65x6mm,2240 mm

MS channel 100x50x6mm,2028mm Long with clamp, bolts, nuts & washers(Dropper for fuse set)

P.G. Clamp

Number plate with clamp

11KV TPMO with polymer insulator complete

3-Phase D. O. Fuse Set complete

MS angle Iron 65x65x6mm,2700 mm Long bracing Complete with 4 clamps

T-off Channel 100x50x1300mm with Clamp nut& bolt

Guarding X-arm(MS Angle 65x65x6mm/3.300 Mtr Long 5.8 kg/Mtr with Clamp and nut & bolts

11 kv Lightening arrestor

140 mm OD PN-4 PE-80 grade UV stabilized HDPE pipe as per IS:4984

GI pipe 6"dia

DURGESH ENTERPRISES