SPL REPAIR TO GATE, CULVERT AND PATH/HARD STANDING AT MRS SUBSTATION AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R-II UNDER GE PANAGARH

Amount

Excavation over areas n. exc 1.50m deep and getting out in soft/loose soil complete all as specified and directed.

M&L for Excavation in trenches n exc 1.5m wide and nexc 1.5m depth for foundation etc or for shaft ,well cessipts, man hole ,pier hole etc n-exc 10 sqm on plan and n exc 1.5m depth and getting out soft/lose soil complete all as specified and directed.

M & L for hardcore of broken stone boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for sand filling under floor in foundation including watering and consolidation complete all as specified and directed.

M & L for cement concrete 1:4:8, Type D-2 (Using 40 mm graded stone aggregates) in foundations etc complete all as specified and directed.

M & L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

M & L for 100 mm thick plain Cement concrete type B-1, 1:2:4 using 20mm graded aggregate) as in floors finshed even and smooth w/o using extra cementsub base complete all as specified and directed.

M & L for Removing excavated soil n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L for Returning ,filling including spreding,levelling watering and well raming in layer n exc 25 cm complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

M & L for fly ash brickwork with subclass `B' bricks old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4),complete all as specified and directed.

Preparation surfaces of steel over 10 cm width or girth and apply of two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming ho complete all as specified and directed

Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths ) complete all as specified and directed

Material and labour for steel work in tubular trusses Post/columns including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade ST-240, complete all as specified and directed.

M&L for RCC M-25 design mix using 20mm graded stone aggregade) as in foundation,and mass filing and mass concrete etc complete all as specified.

M&L for Reinforced cement concret M-25 Design mix using 20mm graded stone aggregate as Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attach complet all as specified.

M&L for Reinforced cement concret M-25 Design mix using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs complete all as specified and directed.

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in Precast cover slab in in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces

M&L for Form work to soffits of suspended slabs such as roof, column floor s slab landing and similar work n-exc 200mm thick (horizontal or sloping) of rough finished concret surface complect all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete complete all as specified and directed

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, for rough finished surfaces of concrete complete all as specified and directed.

M&L for 10mm dia and over TMT Steel bar cut to length bent to shape reqd incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 25.00 mentioned here-in-before but 6mm to 8mm dia as in striups complete all as specified and directed.

All as per item No 25.00 mentioned here-in-before but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Demoltion of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work built in cement mortar complete all as specified and directed

Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for machine pressed precast concrete inter locking paver block any shape and size conform to any size conform to IS 15658-2006 of 80mm thick M-40 grade complete all as specified and directed. Make: M/s Anjali Tiles/ M/s Ultra Tiles/M/sTerra Firma.

M & L for 0.5mm thick semi corugated Pre- painted galvatume aluminum zinc coating GI based of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Mild steel work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed.

S&F Mild steel framed work such as small article, grill grating gate, etc with ends & bar, welded, pintel hinges, hungs as gates stops ,hand made sliding bolts and similar work confirming grade Fe 290Gde or E 165 complete all as specified and directed.

M&L for preparation of new surfaces of steel and applying one coat of red oxide zinc chrome over 10cm in width or girth and applying two coat of synthetic cnamel paints complete all as specified and directed by EIC

M&L for granite of any type of work (table rubbed and polished) instep,jams pillers etc and like cement mortor 1:4 10mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L fly ash brick work with subclass 'B' bricks straight or curved on plan n exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L for RCC M-25 Design mix using20mm graded stone aggregade) as in column ,piller ,pier ,post and struts etc complete all as specified and directed.

M&L for RCC M-25 design mix using 20mm graded stone aggregade) as in foundation,pier ,post and struts etc complete all as specified and directed.

M&L for RCC M-25 design mix using 20mm graded stone aggregade) as in foundation,and mass filing and mass concrete etc complete all as specified and directed.

M&L for Form work to Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concret surface complete all as specified and directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, for rough finished surfaces of concrete etc complete all as specified and directed.

All as per item No 42.00 mentioned here-in-above above but depth exc 1,50 but n.exc 3,0m in any type of soil complete all as specified and directed.

M&L for fly ash brick work with old size ( subclass 'B') bricks straight or curved on plan n exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation and mass filling complete all as specified and directed.

M&L for 15mm thick plastering in cement & sand mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement complete all as specified and directed.

M&L for precast RCC type B1 1:2;4 (20mm graded aggregate) as in cover slab for man hole and similar article with plain face in cm 1:4 complete all as specified and directed.

M&L for cement concret 1:2:4 type B-2 using 40mm stone aggregate as in retaining wall any thickness including necessary form work complect all as specified.

Supply only WPC complete all as specified and directed

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars of 150mm bore complete all as specified and directed

M&L for cement concret 1:3:6 type c-2 concreet bed to drain pipes includind packing under ,and hunching against the side of pipes after they are laid and tested and complect all as specified.

M&L for plain Cement concrete 1:2:4 type B1 using 20mm stone aggregate as in flooring & in foundations, filling and mass concrete complete all as specified and directed.

M&L for soakge well in ordinary soil, foundation in PCC 1:3:6 well honey combed and solid concrete including chamber brick work with filling with brick bats complete of sie 1,2m dia X 3m deep (as per Drawing enclosed) complete all as specified and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in footings fdn beams complete all as specified and directed.

All as per item No 54.00 mentioned here-in-above but in beam and lintels complete all as specified and directed.

M&L for use and waste of formwork to side for coloums complete all as specified and directed

All as per item No 56.00 mentioned here-in-above but for chajjas complete all as specified and directed.

All as per item No 56.00 mentioned here-in-above but for sides and sofits of beams and lintels complete all as specified and directed.

All as per item No 56.00 mentioned here-in-above but for sofits of slab complete all as specified and directed.

All as per item No 56.00 mentioned here-in-above but for side of slab exc 10cm but n.exc 20cm thick complete all as specified and directed.

M&L for cement concrete type C2 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying Two or more coats of 100% Premium acrylic emulsion paint (exterior weather proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. Make: M/s Asian Paint Ltd (Apex Ultima) M/s Shalimar Paints Ltd (Xtra Tough) M/s Berger Paints Ltd (Weather Coat All Guard)

M&L for rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar 1:3 complete all as specified & directed.

M&L for prepration of newly plastered surfaces of wall and applying one coat of alkali resistance primer and two coat of oil bound distemper over a layer of 3 mm thick wall care putty complete all as specified and directed.

M&L for prepartion of newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet trip of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F Factory made steel ventilator with centre hung shutters, dovetailed or welded including pintol hinges, steel handles, etc. as shown with fixed type including one shop coat of red oxide zinc chrome primer complete all as specified.

S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed

S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm long aluminium alloy handles,fabricated type, anodised complete all as specified and directed.

M&L for glazed ceramic colour joint free tiles tiles in verticle surface 350x250x7mm thick set and jointed in neat cement slurry over 10 mm thick 1:4 cement mortar plaster and pointed in coloured cement to match complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm in floors laid over 15mm thick 1:6 cement mortar screed bed etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match complete all as specified and directed.

M&L for cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate 25 mm thick as in floor for receiving screed bed of floor tiling complete all as specified and directed.

Preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

3mm thick figured glass, pin headed type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F Stop valves 15mm dia CP fency type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

M&L for steel tubes,15mm dia bore 'medium grade' with all fitting; laid in trenches or wall complete all as specified and directed.

M&L for PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement etc complete all as specified and directed.

S&F vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets,complete all as specified and directed.

S&F 15mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT orCOLD' with long screwed sunk and fly nuts complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) including urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms) and including waste pipe complete all as specified and directed.

S&F CP Bib taps 15mm dia, with crutch of butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fency type and fixed complete all as specified and directed.

S&F vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests and PVC (SWR) S or P traps (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S&F 10 litre capacity two way flash PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

S&F Tubular towel rail, 20mm dia, D type, brass chromium plated, 60cm long between flanges complete all as specified and directed

S&F PVC connection pipe 15mm size & 600mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top with three layered) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge capacity 1000 Ltrs complete all as specified and directed.

Supply and fixing of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25 mm dia with fly nut complete all as specified and directed.

M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed.

Supply & fix 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.

E/M Portion Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FR PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

All as per item No 95.00 mentioned here-in-above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed

All as per item No 95.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.

M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

Supply and fixed switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed.

Supply and fixed switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps) flush type controlled by one switch complete all as specified.

S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type 230 V complete all as specified and as directed .( For Same Board only) complete all as specified and directed.

Supply and fixed switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified and directed.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply and fixing Bldg security light fittings 25 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.

Supply and fixed 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.

Supply and fixed epoxy powder coated sheet metal enclosure for DBs, double door , Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed.

Supply and fixed MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion complete all as specified and directed.

S & F ventilating exhaust fan 230 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed.

Supply, laying / fixing / connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge for the following ratings Note:- (i) Excavation,sand cushioning,brick will be measured and paid separtely. (a) 10 Sqmm x 2.0 core

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . Note :- Punned thickness 18 cm shall only be considered for payment

Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.

S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.

NATIONAL CONSTRUCTION CO

SUPARNA TRADING

M/S ROY MITRA ENTERPRISE