Construction of Trunk Roads in Majhola Yojna No-4, Ph-2 (Vistar), Moradabad.

Cleaning Jungle including uprooting of rank vegetation, grass, bush, wood, trees and sapling girth upto 30 cm measured at a height of 1.00 Mt. above ground level and removal of the rubbish upto a distance of 50 M outside the periphery of the area cleared. (Including all material, labour & machinery)

Dagballing 15 cm (6") deep in three line aligned with flag and Jhandies as direction by the E/I. (Including all material, labour & machinery)

Providing, laying, spreading and compacting stone aggregate of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3-wheeled steel roller 8-10 tonnes in stages to proper grade & camber, applying and brooming requisite type of screening/ binding materials to fill-up the interstices of coarse aggregate, watering & compacting to the required density. (45-90 mm gauge stone ballast). (Including all material, labour & machinery)

Providing, laying, spreading and compacting stone aggregate of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3-wheeled steel roller 8-10 tonnes in stages to proper grade & camber, applying and brooming requisite type of screening/ binding materials to fill-up the interstices of coarse aggregate, watering & compacting to the required density. (45-63 mm gauge stone ballast)(RATE ANALYSIS ATTACHED ) AS PER MORTH Specification No. 404 (Including all material, labour & machinery)

Providing & laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface and compacting with rollers to achieve the required density complete as per direction of E/I. (Including all material, labour & machinery)

Supply and fixing 80 mm thick precast cement concrete I shaped interlocking paverblock with top layer of minimum 8mm thickness having plan dimension 200 x (160+120 mm) of O.P. cement, smooth high gloss finish, skid resistant, manufactured from rubber moulds through vibro-compression machanism. The compressive strength of concrete paver blocks shall not be less than 30 MPA (M-30) & weight 5.0 Kg/No. confirming to IS: 15658-2006 with a 4 cm thick layer of fine sand including cost of all material, labour, T&P taxes etc required for proper completion of work as direction by E/I. Grey colour; (Including all material, labour & machinery)

Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including cleaning of roads surface and spraying primer @ 0.60 Kg/SqM using machanical means. (Including all material, labour & machinery)

Providing and laying 50mm/40mm thick macadem with 100-120 TPH Hot mix plant producing an average output of 75 tones per hours using crused aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade level and alignment and rolled as per clauses 501.6 and 501.70 to achieve the desired compaction. (Including all material, labour & machinery)

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor @ 0.20kg/sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per MORT&H specification.(RATE ANALYSIS ATTACHED ) AS PER MORTH Specification No. 503. (Including all material, labour & machinery)

Providing and laying 25mm thick Semi Dense Bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output 0f 75 tones per hour using crushed aggregate of specified grading premixed with bituminous binder,@5.0% weight of total mix and filler transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor controlled to the required grade, level and alignment and rolling with smooth wheeled vibratory and tandem roller to achieved the desired compaction complete in all respect & as per relevant clauses of MORT&H specification section-508. (Including all material, labour & machinery)