Construction of car parking at Inder Nager Dhali ward no 20

Amount

Demolition below G.L. Upto 1.50Metres depth and disposal of unserviceable materials within 20 metres lead. un-reinforced cement concrete more than 15 cm. Thickness.

Demolition of stone masonry below G.L. upto 1.5 metres depth including stacking of serviceable materials and disposal of un-servicable materials within 20 metres lead. Rubble masonry in cement mortar.

Dismantling steel work upto span of 10 metres and height between ridge and floor level upto 5 metres in single sections including dismantling and stacking the materials within 20 metres lead (Riveted work where rivets are required to be cut shall be measured and paid for separately). Channels, angles, tees and flats:-

Cutting in earth work in all kinds of soil including spade work, pick work, jumper work and blasting work and disposal of excavated earth up to all leads and lifts as directed by Engineer-in-Charge. (Disposal of earth/muck in MC dumping site at Bharyal free of cost, transportation charges will be paid extra)

Excavation in earth work in all kinds of earth work including spade work, pick work, jumper work, B/work chiseling wedging out of rock etc. up to all lifts in earth work including dressing of sides and bed and disposing of excavated earth to be leveled and neatly dressed as directed by the Engineer-in-charge. (Disposal of earth/muck in MC dumping site at Bharyal free of cost, transportation charges will be paid extra)

Providing and laying cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in Foundation and plinth.

Providing from work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling upto all heights and removal of the same for insitu-reinforced concrete & plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters buttresses, plinth and string courses and the like

Steel work welded in built up sections,trusses and framed work,including cutting,hosting,fixing in position and applying a priming coat of red lead paint.In beams joists channels,angles,tee,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.

As per item No. 8 here in before but rforving only dismantles steel from railing

Malwa & Labour for painting two coat of synthetic enamel paint other than white read lead/Red oxide/zinc oxide primer, brushing to give an even shade including cleaning the surface of steel all dirt, dust and other foreign materials

SATISH KUMAR JAGTA

RAM LAL