REPAIR/MAINT OF DRAINS, STORM WATER DRAINS, CHAIN LINK FENCING, BOUNDAY WALLS, HARDSTANDING, PAVER BLOCKS, GATES, AND ALLIED WORKS AT KLP OTHER THAN KLP AREAS UNDER AGE B/R-III OF GE (AWC) MHOW

Amount

Dismantling posts or struts (Wood, steel or RCC) any section including taking out embedded portion in concrete, brick work, masonary etc, and making good disturbed ground complete all as specified.

M & L for excavation in post holes (or similar holes) n.exc 0.5 cum on plan and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removind surplus soil to a distance not exc 50m and making good surface all as specified.(soft/loose soil)

M & L PCC 1:3:6 type C-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. complete all as specified and directed.

S & F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Dismantling fencing wire mesh, any type complete.

Supply only chain link MS galavanised fencing any size or type all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S & F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing, and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed

Restraining & resecuring existing galvanised/ms barbed wire straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed

Dismantling of disturbed existing galvanised steel sheeting from the angle iron picket, MS square tube frame, or any other type of fixing and stacking the same a side or store safely and refixing the same to angle iron pickets or MS steel frame at old/new place after completetion of stone/ Brick wall work in any height , any position, any description, fixed galvanised sheet with coach screws and washers, as in wall clading, roof, or as view cutter over the boudary wall, etc. complete all as specifed and directed.

Dismantling of Concertina coil of any dia and length over existing barbed wire fencing of any height, shape or any place and re laying of concertina coil in old/new location in any dia , any expended length any height , any place and securing two colis each other and to barbed wire with 'U' clips staples , including all necessary securing material complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any guage, thickness, including nainital or similar pattern roof coverings

S & F Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, wall clading, or as view cutter over the boundary wall, etc. including dismantling of corrugated steel sheeting, complete all as specifed and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F mild steel framed work in doors or gate in angle or other section with gusset plates, rails, braces etc complete drilling for fixing and either hooks and bottom hinges grouted in ground or hanging fittings including 375 mm long sliding door bolts complete all as specified and directed. (Fe 410-W Gde E-250 quality -A)

M & L Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M & L Preparation of old steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth apply one coat of synthetic enamel paint complete all as specified and directed.

S & F mild steel TMT round bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooking for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Ditto as item above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers,distribution and binders

M&L for RCC type A1 1:1.5:3 ( 20 mm graded aggregates) as in foundations, including rafts, footings, foundation beam, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC type A1 1:1.5:3 ( 20 mm graded aggregates) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M&L for RCC type A1 1:1.5:3 ( 20 mm graded aggregates) as in columns, posts and struts complete all as specified and directed.

M&L for RCC type A1 1:1.5:3 ( 20 mm graded aggregates) slab of any description including all necessary form work complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beam, sides and soffits(if any) of foundation and plinth beams and similar work, vertical or to batter surfaces for rough finished flat surfaces of concrete, complete all as specified and directed.

Formwork rough finished surface of concrete as in faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter .complete all as specified and directed.

Formwork rough flat Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions.

M&L Granite 19/20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platform and like, over & including 15mm thick screed bed or bedding layer in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour as per direction of GE, including demolition of stone slabs and tiles of any description or thickness etc. complete all as specified and directed

M & L machine pressed precast concrete 60 mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and no pigment laid over dry sand cushioning, filling of joints with sand including demolition of stone slabs/tiles/PCC of any description or thickness etc . colour and shape as approved, complete all as specified and directed. Note : Sand cushioning shall be measured and paid separately .

Description all as per ser item No. 28.00 above, but except tiles

M & L machine pressed precast concrete 80 mm thick glossy interlocking paver block M-40 Grade to IS 15658-2006, with grey cement and no pigment laid over dry sand cushioning, filling of joints with sand including demolition of stone slabs/ tiles/ PCC of any description or thickness etc . colour and shape as approved, complete all as specified and directed. Note : Sand cushioning shall be measured and paid separately .

Description all as per ser item No.30.00 above, but except tiles

M & L precast cement concrete curved stone with solid blocks, exc. 10 cm in width type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:6 etc. , complete all as specified and directed.

M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed

M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. and including demolition of PCC, complete all as specified and directed.

Material and labour for moorum / Red Bajari filling in floor or pavings, laid in layers n. exc. 15 cm thick, spread, levelled, watering and rammed complete all as specified and as directed.

Demolition cement Concrete (reinforced) of any descriptions in any position complete all as specified and directed.

Demolition cement Concrete (un-reinforced) of any descriptions in any position complete all as specified and directed.

M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less and incl all necessary formwork.

M & L Forming 12 mm thick exansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ (upto thickness 100 to 200mm)

M & L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘B

M & L Finishing surface of concrete roads, pavements, by belting

M&L for Preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.

Excavation in trench in soft/loose soil not exceeding 1.5M wide and not exceeding 1.5M in depth not exceeding 10 sqm on plan and getting out in any type of soil complete.

Returning filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete.

Removing surplus excavated material to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above starting point complete.

S & F Reinforced concrete pipes 600 mm bore, class NP2 , laid and jointed complete with collars, including demolition and breaking up drain pipes, complete all as specified and directed.

S & F Reinforced concrete pipes 450 mm bore, class NP2 , laid and jointed complete with collars, including demolition and breaking up drain pipes, complete all as specified and directed.

S & F Reinforced concrete pipes 300 mm bore, class NP2 , laid and jointed complete with collars, including demolition and breaking up drain pipes, complete all as specified and directed.

M&L preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of cement base paint over one coat of cement primer complete all as specified.

M&L preparing of old plastered or unplastered surfaces of walls, cornices etc and applying one coat of cement base paint on old decorated surfaces of wall complete all as specified and directed.

M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 including demolition of stone/boulder masonary built in cement mortar etc, all as specified and directed

M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 but except stone including dismantling of stone/boulder masonary built in cement mortar etc, all as specified and directed. Note :- Stone obtained from dismantling shall be reused

M&L brick work with sub class 'B' modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed.

M&L brick work with sub class 'B' modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 but except bricks, including dismantled of brick work built in cement mortar complete all as specified and directed. Note:- Bricks from dismantling shall be reused

M & L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cementt and including taking down cement plaster any description on brick or stone wall complete, all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified.

M & L Raised pointing to random rubble masonry , coursed or uncoursed in CM 1:4 complete all as specified and directed.

M & L Raised pointing to random rubble masonry , coursed or uncoursed in CM 1:4 including raking out joints/pointing to existing old surfaces built with cement mortar, complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work complete.

M & L PCC 1:2:4 type B-1 using 20 mm graded aggregate as in surface channel and drains etc. with required necessary form work and including demolition of PCC, complete all as specified and directed

S&F in repair PVC (SWR) pipe 50 mm dia in any length provided as in brick wall as weep hole, complete all as specified and directed.

M&L for preparation of old concrete / PP tile surface of any description b brooming with coir/ wire brushes and cleaning and washing the floor surface with water to remove the fine dust and applying two coats of Lacquer polish (1001) chemical mixed with pigment all as per manufacturer;s instruction complete all as specified and directed by engineer in charge

M/S Ashish Construction (BID ID -3342655)

Goyal Construction (BID ID -3344425)

ram prashad chotelal batham (BID ID -3352895)

sunway associates (BID ID -3352450)

PREMCHAND BHAWANI SAHAI (BID ID -3351778)