Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.1 LAccepted-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L1 | Accepted-AOC L1 | |
| 2 | L2₹16.9 L+₹1.8 L (12.1%)Rejected-Finance H NO 2049 HANUMAN COLONY NEAR TCP 3 HISAR CANTT PIN 125006 HARYANA | HISAR | HARYANA | 125006 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹17.2 L+₹2.1 L (14.1%)Rejected-Finance 45 BEHIND SHOP NO 40 AJAY VIHAR HUDA ROAD SIRSA 125055 | SIRSA | SIRSA | HARYANA | 125055 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹17.3 L+₹2.2 L (14.5%)Rejected-Finance GURU NANAK NAGAR GALI BHATIA DHARAMSHALA WALI SIRSA HARYANA PIN 125055 | SIRSA | HARYANA | 125055 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹18.0 L+₹2.9 L (19.5%)Rejected-Finance CC III 28A JANTA BHAWAN ROAD SIRSA HARYANA 125055 | SIRSA | HARYANA | 125055 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹20.1 L
EMD Value
₹40,200
Closing Date
22 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) SIRSA
GE (AF) SIRSA-125055
COMPREHENSIVE MAINT TO MARRIED ACCN OF POCKET-03 (MES QTRS) IN DOMESTIC AREA AT AF STN SIRSA
2023_MES_606683_2
GE/SRA/T-41/2023-24
Open Tender
Miscellaneous Works
Item Rate
210 days
GE (AF) SIRSA
PLEASE REFER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (AF) SIRSA
₹40,200
Yes
7 Aug 2023
14 Jul 2023
24 Jul 2023
14 Jul 2023
22 Jul 2023
15 Jul 2023
Amount
Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
Dismantling Cement Concrete (un-reinforced) in Toilet Floors, Sunken Floors including taking out PCC, mortar of any description including raking out joints, hacking for key, scrubbing down with water and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed.
Demolition Cement Concrete (Reinforced) of any description and in any position complete and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.
Taking down Chowkat or Frame of any description (without taking off Shutter from the Frame) not exc. 1.50 SQM Each, complete all as specified and as directed.
Taking down chowkhat or Frame of any description (without taking off Shutter from the Frame) exc. 1.50 SQM but not exc. 4.00 SQM Each, complete all as specified and as directed.
Taking down Shutter of any description, exc. 1.00 SQM but not exc. 2.00 SQM Each, complete all as specified and as directed.
Taking down Steel Window, Ventilator Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, not exc. 1.00 SQM Each, complete all as specified and as directed.
Taking down Steel Window Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, exc. 1.00 SQM but not exc. 2.00 SQM Each, complete all as specified and as directed.
Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
Hacking out old broken Glass (any thickness, size, quality or description) from Metal Frame including punching or drilling out old Glazing Pins/Spring Clips, complete all as specified and as directed.
M&L Hardcore of broken bricks gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, rammed to a true surface and finished smooth complete all as specified and as directed.
M&L Cement Concrete type B-0 1:2:4 (12.5mm graded stone aggregate) as in Coping, Bed Plates, Holdfast, Bed Block, Kerb Stones including necessary Formwork and weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.
M&L Cement Concrete 1:3:6 type B1 (20mm graded stone aggregate) as in Filling Back side of Pressed Steel Frame, complete all as specified and as directed.
M&L Reinforced Cement Concrete 1:1½:3 (20mm gradded stone aggre-gate) in Slabs supported on Walls, Beams and Columns in Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appropriate Item.
M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
M&L Brick work using Serviceable Bricks obtained from Item No. 16 here-in-before including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in cement mortar 1:6, complete all as specified and as directed.
M&L Formwork to cooking platform and Similar Items including Edges for Rough Finished Flat Surfaces of Concrete, complete all as specified and as directed.
S&F Pressed Steel Frame of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.
S&F Pressed Steel Frame of size 125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.
Taking down shutter of any description, area exc 1 Sqm and n.exc 2 Sqm each and refixing in the same opening after easing and adjusting complete all as specified.
M&L Second Class Hardwood Plain framed, 35 mm thick panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces., kiln seasoned and chemically pressure treated: and fitted to Steel Frame, complete all as specified and as directed.
M&L Glazed and Skeleton Shutter 35mm thick of Second Class Hardwood prepared to receive Gauge/Glass (without Sash Bars) fixed with mitred beeds supplied and fitted to Chowkat and securing Glass, Gauge, etc. sizes of Members of Shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete all as specified and as directed.
S&F Factory made Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.
M&L Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain colour (Ivory shade) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded wood grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either Side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable 5mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mm x 10mm (90°) and jointed together with Solvent Cement and fixing in the Frame and hanging/fixing with and including Stainless Steel Hinges, complete all as specified and as directed. NOTE : Stainless Steel Hinges will be Measured and Paid under appropriate Item.
S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and as directed
M&L Steel Window Box type using ERW ‘P’ Section comprising Double Frame for Gauged and Glazed Skeleton Shutter jointed internally with Flat Iron 40x3mm complete including Mild Steel Tower Bolts, Hinges, Handle, Stops, Lugs including GI Steel Wire Cloth, Glazing, etc. all as directed. Outer Section of Frame should be 50x25mm and Inner Section should be 40x20mm including making good by cement concrete and mortar, complete all as specified and as directed. NOTE :- (a) For the purpose of Measurement & Payment Double Shutter with Frame shall be considered as One Unit. (b) Cost of Iron Mongery as ordered/required at Site, GI Steel Wire Cloth will deem to be included in the Quoted Unit Rate. (c) Guard Bars are included in the Quoted Unit Rate. Spacing of 10mm Square Bar will be 10 Cm Centre to Centre. (d) Glazing shall be Measured and Paid separately under appropriate Item.
M&L Mild Steel Handle 100mm long, Chromium plated for Shutter of Built-in Steel Cup Board, Godrej Pattern and Fixed-in-repairs, complete all as specified and as directed.
S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 160 Gram), Extruded Section, complete all as specified and as directed.
S&F Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), Extruded Section, complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.
S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.
S&F Butt hinges, 100 mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 and fixed, complete all as specified and as directed.
S&F Cold Rolled Mild Steel Butt Hinge 100mm long medium weight and fixed, complete all as specified and as directed.
S&F Aluminium Handle 125mm long (weight not less than 90 Gram), Cast type, anodised, complete all as specified and as directed.
S&F Aluminium Handle 150mm long (weight not less than 120 Gram), Cast type, anodised, complete all as specified and as directed.
S&F Mild Steel 150mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.
S&F in repairs Mild Steel 150mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate, complete all as specified and as directed.
S&F In repair stainless steel Curtain Rod 32mm dia including Pair of brackets not less than 50 mm long & including a pair of Side Dome and to be fitted / tightened on Curtain Rod, complete all as specified and as directed
M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed
M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and Fixed-in-repairs, complete all as specified and as directed.
S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.
S&F Sheet Glass 4.0mm thick, Frosted quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.
M&L TMT Bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.
M&L for applying waterproofing treatment to sunken portions of floors as specified here-in-after :- (a) Cleaning of surfaces properly to remove all loose particles, laitance, dust etc and applying a coat of cement slurry. (b) Rendering/Plastering 15mm thick on Brick, Concrete surfaces in Cement Mortar1:3 mixed with 3% WPC by weight of cement (to be measured seperately), finishing surfaces Even and Smooth without using Extra Cement. (c) Watering the plastered surface for proper curing and removing all excess water to leave just a damp surface. (d) Applying Two Coats of two component polymer modified cementitious waterproofing coating @ 1.50 KILOGRAM PER SQM Each Coat on plastered surfaces as per manufacturer's recommendations. The Second Coat shall be applied in crosswise direction when the First Coat is completely dried and after a gap of minimum 01 hour. (e) Curing of waterproof coating for a minimum period of 24 hours using watering, wet hessian cloth etc as directed by Engineer-in-Charge. (MAKE: DR FIXIT, PIDIFIN 2K / SIKA, SikaTop®-107 Seal IN or equivalent item in other makes specified in tender)
M&L for cement concrete 1:5:10 type E-2 ( using 40 mm graded stone aggregate) in sunken portion of slab, complete all as specified.
S&F in repair 1.20mm thick Fibre glass reinforced translucent plain sheeting with side lap fixed with coach screw and washer in roof, wall complete all as specified.
Dismantling of damaged/unserviceable Asbestos Plain Building Boards of any descriptions, complete all as specified and as as directed.
S&F 6mm thick HPSC cement fibre plain building boards, fixed to wall, including finishing with 1.5 mm thick wall putty complete all as specified and as directed.
M&L Cement Concrete 1:4:8, type D-2 (40mm graded stone aggregate) 75mm thick as in Fillings, Sub-base to Floors, etc. complete all as specified and as directed.
M&L Cement Concrete 1:2:4 type B0 (12.5mm graded stone aggregate) 25mm thick in Sub-base for laying/fixing of Tiles in Floor, complete all as specified and as directed.
M&L Cement Concrete 1:2:4 type B1 (20mm graded stone aggregate) 40mm thick as in Flooring, finishing Cement Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L Cement Concrete 1:3:6 type C2 (40mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L Non-skid Coloured Ceramic Tiles 7 to 8.0mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.
M&L Non-skid Coloured Ceramic Tiles 7 to 8.0mm thick (Square/ractngular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Vertical Surfaces i.e. Dado, Skirting (depth not more than 150mm) etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, fixing over and including rendering 10mm thick in Cement Mortar 1:4, complete all as specified and as directed.
M&L Coloured Glazed Ceramic Tiles 300x450x7mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in CM 1:4, complete all as specified and as directed.
M&L Floor (Paver) Tiles 9.0 to 10mm thick area of each tile exc 0.09 sqm and n exc 0.16 sqm, highly abrasive, Anti-skid, Impact Resistance, laid over and including 15mm thick Screed Bed in CM 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
M&L Granite (of any type) Tiles 16-18mm thick machine cut, Laid over in 10mm thick CM 1:4 screed and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
M&L Granite (of any type) Tiles 16-18mm thick machine cut, in skirting/dado bedded in 10mm thick CM 1:3 and jointed with grey cement slurry, and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
M&L Machine cut Kota Stone Slab 18-20mm thick in Flooring, laid over 20mm thick Screed base in Cement Mortar 1:4 laid and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
M&L Machine cut Kota Stone Slab 18-20mm thick in Riser of Steps, Skirting, Dado and Pillar, laid over 10mm thick backing coat of Cement Mortar 1:4 and joined with grey Cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
M&L for MS Door packing Strip including fixing with nuts and bolts complete, all as specified and as directed.
Dismantling wrought iron or mild steel work of any description in rafters, purlins and wind ties wtc and removal from site complete all as specified and directed.
M&L Mild Steel Framed Works such as Grills, Gratings, etc. with Ends of Bars shouldered and/or riveted ; Ladders; cooler stand and similar Work, conforming to Fe-290, Gde-E-165, including Dismantling of the same, complete all as specified and as directed.
M&L Cutting Holes in Brick Walls, exc. Half Brick but not exc. One Brick thick, built in CM for inserting of Cooler Stand Making Good to dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregate) or CM 1:3 (as required) and adjoining Surfaces in CM 1:4, complete all as specified and as directed.
Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc and removal of debris outside AF land complete all as specified and directed.
M&L Rendering (Internal) 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces like facia and chajja, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L Rendering 10 mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceiling, etc., Plastered Surfaces finished Even and Smooth, without using Extra Cement, complete all as specified and as directed.
M & L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately as "Supply only".
Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.
M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even,including taking down and raking out joints, complete all as specified and as directed.
M&L for preparing new Plastered Surfaces of Walls and applying Two coats of weatherproof exterior emulsion paint (in Camouflage pattern) over and including priming coat with suitable exterior primer, applied as per manufacturer's recommendations complete all as specified and as directed.
M&L for preparing new Rough Cast Plastered Surfaces of Walls and applying Two coats of weatherproof exterior emulsion paint (in Camouflage pattern) over and including priming coat with suitable exterior primer, applied as per manufacturer's recommendations complete all as specified and as directed.
M&L preparing newly Plastered surfaces of Ceiling including cornices etc. and applying Three Coats of White Wash, complete all as specified and as directed.
M&L for preparing New Plastered Surfaces of Walls by applying a Coat of Wall Putty, 1.5 mm thick including rubbing down with Sand Paper to obtain a smooth finish surface and applying with rollers Two Coats of Acrylic Distemper (as approved) complete all as specified and as directed.
M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying One coat of white wash on old surface of wall complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of ceiling complete all as specified and directed.
M&L for complete removal of existing treatment on walls and applying a Coat of Wall Putty, 1.5 mm thick including rubbing down with Sand Paper to obtain a smooth finish surface and applying with rollers Two Coats of Acrylic Distemper (as approved) complete all as specified and as directed.
M&L preparing old Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying one Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.
M&L preparing Old Decorated/Treated Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
M&L preparing Old Treated/Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
M&L preparing New Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed.
M&L preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
M&L Galvanised Tubes 15mm bore (dia), 'medium grade', with all Fitting and fixed complete to Walls and Ceilings or laid in Floors,including taking up or down and segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use , complete all as specified and as directed.
M&L Galvanised Tubes 20mm bore (dia), 'medium grade', with all Fitting and fixed complete to Walls and Ceilings or laid in Floors, ,including taking up or down and segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use complete all as specified and as directed.
S&F In repairs Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Short Body with Capstan Head, screwed down, screwed for Iron Pipe or for Brass Ferrule , complete all as specified and as directed.
S&F In repairs Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe , complete all as specified and as directed.
S&F In repairs Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, screwed both Ends for Iron Pipe , complete all as specified and as directed.
S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed.
S&F in repair Ball brass valves 20 mm high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
M&L Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, hoisted and fixed in Position all as specified in MES Schedule including dismantling/ lowering down unserviceable Water Storage Tanks, complete all as specified and as directed.
S&F In repairs Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed.
M&L Cleaning and removing all Scales and dirts from the Tank and mouths of circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 250 Litre and not exc. 500 Litre, cleaning the Tank by scrubbing the deposits with Wire Brush, re-fixing Inlet and Outlet Pipes in the Same Position and writing Letters "CLEANED ON DD.MM.YYYY" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and as directed.
S&F In repairs Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces , complete all as specified and as directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
S&F In repairs Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device , complete all as specified and as directed. (NOTE: This item shall only be measured for replacing existing seat covers)
M&L for fixed in repairs of PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in CM 1:3 , complete all as specified and as directed.
S&F In repairs Vitreous China Wash Hand Basin 450x300mm in size, White (Flat Back type) with Waste Fitting Brass Chromium plated 32mm dia, PVC Waste Pipe 32mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3 , complete all as specified and as directed.
S&F in repair PVC Waste Pipe 32mm bore (dia) having 60 Cm long (as approved), complete all as specified and as directed.
S&F in repairs PVC Connection Pipe 15mm size and 45 Cm in length with Adopter Nuts of PVC, complete all as specified and as directed.
S&F in repair Bath Wall Mixer with 15mm bore (dia) Spout, Chromium Plated with long Bend Pipe for Over Head Shower including Flanges, complete all as specified and as directed.
S&F in repair chromium Plated Shower Rose with Shower Arm 100mm, Swival Joint including fixing to Steel Pipe, complete all as specified and as directed.
S&F in repairs Brass Chromium Plated Tubular Towel Rail 20mm dia, 60 Cm long with Brackets, complete all as specified and as directed.
S&F in repairs Looking Mirror 5.0mm thick of size 450x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror complete all as specified and as directed.
S&F in repairs Glass Shelf (Bath Tray) with CP bracket and railing 45x15 Cm in size, complete all as specified and as directed.
S&F in repairs Corner Glass Shelf single Decker (Triangular shape) of size 30 Cm with CP bracket and railing, complete all as specified and as directed.
S&F in repairs Sink with Drainage Board made of Stainless Steel l.0mm thick Kitchen or Laboratory overall size 915x460mm having Bowl size 410x355x185 mm with Plugs, Washers and Wastes, PVC Waste Pipe 40mm bore (dia) of suitable Length, etc. including bedding in CM to Dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe, complete all as specified and as complete all as specified and as directed.
S&F in repairs Brass Chromium Plated Sink Mixer 15mm bore (dia), Wall mounted with 122mm (5") Swivel Spout, Connecting Legs including Wall Flanges, complete all as specified and as directed.
S&F in repair Grating 100mm dia in size, Chromium Plated (as approved) , complete all as specified and as directed.
S&F in repairs PVC Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate) , complete all as specified and as directed.
S&F in repairs PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors, complete all as specified and as directed.
S&F in repairs PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors , complete all as specified and as directed.
S&F in repairs PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls, complete all as specified and as directed.
S&F in repairs PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls, complete all as specified and as directed.
S&F in repairs PVC (SWR) Bend 75mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement, complete all as specified and as directed.
S&F in repairs PVC (SWR) Bend 110mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement , complete all as specified and as directed.
M&L Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed.
M&L Running Welding Work exc. 2.5 Cm but not exc. 5.0 Cm (thickness of Metal to be welded exc. 6.0mm but not exc. 9.0mm) to Members of existing Door/Window/Ventilator/Guard Bars/ Gate/ Grills etc. Guard Bars in repairs, providing new Hinges to make the Steel Members Functional (as required) including painting the Steel Member to match the existing, complete all as specified and as directed.
S&F in repairs Coloured PVC Board Scratch and strain free (weight not less 9 Kg/Sqm) in Door, Shelves for Kitchen Cabinets, one side plain & other side laminated (Wood Grain Finish) , 18/19mm thick as required, jointed to form cabinet by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including providing & fixing of Stainless steel L shaped hinges suitable for 18/19 mm PVC Board (minimum of 02 Nos for Each leaf ) to hold cabinet shutter, Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter) and Door catcher (01 no for each leaf), complete all as specified and as directed. NOTE: Quoted unit Rates are inclusive of PVC board, handles, hinges, screws, Door catcher and adhesive etc.
M&L for 40mm Waste coupling, brass, chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts, fixed in repair, suitable for 32mm dia waste pipe complete all as specified and directed.
S&F in repair heavy duty Spindle/face suitable for Bib Tap, Concealed stop cock, Angle valve of 15 mm bore (dia), Cast Copper alloy complete all as specified and as directed.
M&L for Renewing of wall, floor, tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles set and jointed in Neat Cement Slurry and pointed in White Cement , laid over and including Screed Bed 15mm thick in CM 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate. complete all as specified and as directed.
S&F in repairs cover for PVC tanks of capacity 500 Litre to 1000 Litre with hinges complete all as specified and as directed.
S&F in repairs Stainless Steel Plate Rack 75x75x25 Cm in size, made out of Stainless Steel l.0mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws, complete all as specified and as directed.
STAR CONSTRUCTIONS
M/s Sheoran Brothers
BHATIA ENTERPRISES
M/s Satguru Traders
VIVEK CONSTRUCTION CO
STELLAR PROJECTS
m/s Rajesh Kumar
S K BUILDERS
PRINCE CONSTRUCTION
NISHTHA BUILDERS
NAIB ENTERPRISES
M/S SAI BUILDERS
M/s Devendera construction
DABAA CONTRACTORS
M/S BHAGWATI CONSTRUCTION COMPANY
RISHABH BUILDERS
stage.html
html • 0.09 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .