Karnataka

Retender

Works

Lift Irrigation Scheme

PROVIDING LIFT IRRIGATION SCHEME TO KOLABAL VILLAGE IN MASKI TALUK OF RAICHUR DISTRICT.(ST RESERVATION ONLY)

Minor Irrigation Department

Minor Irrigation Division Koppal | Karnataka

Amount: ₹74.9 LCloses: 11 Feb 2025Closed

Timeline

Published3 Feb 2025
Closed11 Feb 2025
Retendered3 Feb 2025

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 3 Feb 2025

Tender Value

₹74.9 L

EMD Value

₹74,900

Closing Date

11 Feb 2025, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

BASAVARAJ S PATIL

Office Number

08539220054

Work Description

PROVIDING LIFT IRRIGATION SCHEME TO KOLABAL VILLAGE IN MASKI TALUK OF RAICHUR DISTRICT. (ST RESERVATION ONLY)

Tender Information

Tender ID

MI/2024-25/LI/WORK_INDENT3489

Reference Number

MI/2024-25/LI/WORK_INDENT3489

Tender Type

Reserved

Product Category

Lift Irrigation Scheme

Form of Contract

Two Tender Document System(Two Cover)

Location

Minor Irrigation Division Koppal

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredAnnual Turnover Certificate with UDIN Certified by CA

RequiredCompany Registration Certifcate

RequiredDetails of Existing commitments and ongoing works as per bid document

RequiredDetails Works for which Tenders already submitted as per section 3 of Standard bid document.

RequiredLatest Address and contact number for communication to be furnished.

RequiredContractor should produce the updated G.S.T Clearance Certifcates, IT Returns, Proft and Loss Statements along with balance sheets issued by Chartered Accountant for the years from 2019-20 to 2023-24.

Requiredthe work is reserved for ST category only, Hence ST Register contractors only should apply and enclosed Caste Certificate

RequiredIf the work is Reserved for SC or ST Contractors than the SC or ST contractors have to upload the Caste certificate and 10 year Domicile Certificate. The originals of the same have to be produced for Scrutiny

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The intending Bidder/ firm/ company are advised to visit the work site before submission of the tenders

The necessary Certifcates / documents in support of eligibility criteria fulflled as stipulated shall be scanned and attached to e- tender document. The original certificate / documents shall be produced prior to the opening of bid for verification. Scanned signature of the Bidder/ firm/ company authorized representative of the Bidder/ firm/ company shall be attached while uploading bid document.

If any of the dates mentioned above happens to be a general holiday, the next working day holds good.

conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever.

Corrigendum will be published in the website for all modifications or corrections if any.

The contractor should mention their recent correct postal address & mail address in declaration forms.

All materials like steel, cement etc., required for the above work should be procured by the contractor only. No departmental supply of any materials shall be made by Department.

The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work & also Land acquisition problems if any.

Typographical errors, if any, will not be the ground for any claims by the Contractor.

The necessary Certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to e- tender document. The original certificate / documents shall be produced for verification when demanded, otherwise the tender will be treated as non responsive bid and rejected.

Scanned signature of the Bidder/ firm/ company authorized representative of the Bidder/ firm/ company shall be attached while uploading bid document.

Incomplete tender documents will be rejected.

As per the Karnataka Building and other Constructions Workers Welfare Cess Act 1996, 1% of the bill amount will be deducted from the bills.

The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work.

The contractor should furnish the name of the individual / firm / company with address & telephone No with place of registration, year of incorporation etc.

Original documents shall be produced for verification at the any stage of tender process, Failure to produce original documents will lead to disqualification. work done certificate should have all the details CR no, work order issuing date, work completion date and year as asked in bid document.

The Applicant shall be registered in KPWD and shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by GOK/GOI.

Restrictions on Public Procurement from Bidders of certain countries as per Government order No. FD 455 Exp-12 2020 Bengaluru dated:25-08-2020.

During the execution of works, if any minor minerals are required, contractors have to abide by the prevailing rules and Acts applicable to Minor Minerals. As per the prevailing rules, for any use of Minor Minerals, the contractor has to submit the mineral Dispatch Permit (MDP) obtained from Mines and Geology Department. If mineral Dispatch permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 (as amended from time to time) will be deducted from the contractors bill.

The agencies participating in the tender shall be registered in the Construction Labor Board as per the G.O. No. LD 300 LET 2006 Dated:18-1-2007 and Addendum No. LD 95 LET 2013 Bengaluru Dt:1-4-2013. Also the contractors entrusted with the work shall employ the labors only who have registered in the Karnataka Building and Construction Workers Welfare Board failing which the contractor shall be liable for any further action as deem fit by the authority.

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in any of the forms as mentioned in bid document for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with Clause 25.5 of ITT and Clause 44 of the Conditions of Contract for all works.

The Bidder shall quote Rates Without GST for either materials or works Contract (Service).All other duties (Including recovered from the contractor bill), taxes, and other levies payable by the contractor under the contract or for any other cause shall be included in the Total Tender Price submitted by the Tenderer.

The contractor has to make his own arrangements for procurement of all the required materials and the materials so procured shall confirm to the relevant IS Specifications and obtain necessary quality certificate from authorized quality control.

The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing.

The tenderer shall also disclose if there are any bankruptcy proceedings against him.

The Work Done Certificates shall be issued by the Executive Engineer with indent number mentioned (if work done in Karnataka State), otherwise it shall be issued/counter signed by Superintending Engineer (if the work is done in other states).

Sub-Leasing/G.P.A of Work is Prohibited.

Each Item Of BOQ To be read as with all lead and lifts and including loading and unloading charges and all other charges and as per the direction of Engineer in charge.

Uploaded drawings are for TENDER PURPOSE ONLY.

The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the work listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Income Tax : Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos. to be uploaded.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee into the respective receiving bank accounts of KPPP Portal on or before the last date and time of bid submission.

The tender processing charges paid by the bidder/ firm/ company are not refundable even if the tenders are cancelled.

All other terms and conditions as per KW-4 tender documents.

Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18 Percent of Amount put to Tender) amount is kept in form of Overhead in sanctioned estimate. According to guidelines in Common SR Amount put to tender and ECV amount are excluding GST. KPPP Portal format has No Options to add GST separately. The item wise rates do not include GST. Hence, GST will be paid separately for the quoted amount accordingly.

Each item of BOQ is to be read as with all lead and lifts, loading, unloading and as per the directions of Engineer in charge

Technical Criteria

Past Experience

ITT 3.2c To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. (2019-20,2020-21,2021-22,2022-23&2023-24)Executed in any one year the minimum quantities of work 1) Earthwork including excavation and embankment etc- 1535.14 Cum,2)Cement Concrete (Including RCC and PSC ) : 33.30Cum,ITT 3.2c To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. (2019-20,2020-21,2021-22,2022-23&2023-24)Executed in any one year the minimum quantities of work 1) Earthwork including excavation and embankment etc- 1535.14 Cum,2)Cement Concrete (Including RCC and PSC ) : 33.30Cum,3)Reinforcement Steel :1.2 Tonne 4)HDPE PIPE 840.00 Rmt 5) Centrifugal pump 10HP : Nos4

Others -- Work Done Certificate issued by the Officer not below the rank of Executive Engineer

Capabilities of Vendor

ITT 3.2b.Satisfactory completion (at least 25% of the contract value), as Prime contractor, at least any constrction work from Single Contract of value not less than Rs 18.71 Lakhs during the last five years (2019-20 to 2023-24). The work done certificate should be obtained duly signed from an Officer not below the rank of Executive Engineer of the concerned division

Others -- Work Done Certificate issued by the Officer not below the rank of Executive Engineer

EPF & ESI Registration Certificate & Previous month ESI Payment challan.

Others -- Registration Certificate

ITT3.3 b. Liquid assets and or availability of credit facilities of not less than Rs. 22.46 Lakhs (Credit lines / Letter of credit / Certificates from Banks) for meeting the fund requirement etc

Others -- Bankers Certificate

Total value of civil engineering works executed and payments received in the last five years (year-wise) FROM YEAR 2019-20 TO 2023-24.

Others -- statement issued by Chartered Accountant

List of existing commitments and ongoing works

Others -- Certified copy

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Others -- Certified copy

Financial Status

ITT3.2 a. To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. (2019-20, 2020-21, 2021-22, 2022-23 & 2023-24). Achieved in at least one financial years a minimum financial turnover of Rs. 74.86 Lakhs

Others -- Audited profit and loss Account statement issued by Chartered Accountant

Reports on the financial standing of the tenderer, Such as profit and loss statements and auditors reports for the last five year

Others -- Audited profit and loss Account statement issued by Chartered Accountant

Work Locations

Fee & Financial Details

Tender Fee Amount

₹1,880

EMD Fee Amount

₹74,900

Important Dates

Last Activity

3 Feb 2025

Published

3 Feb 2025

Bid Opening

13 Feb 2025

Download Ends

10 Feb 2025

BOQ Preview

•

PROVIDING LIFT IRRIGATION SCHEME TO KOLABAL VILLAGE IN MASKI TALUK OF RAICHUR DISTRICT.

•

PUMPING MACHINARIES (SITE NO:I) :- supply and delivery of Centrifugal pumpset at sit and new best make and with discharge duty timing to 151 standards and its latest mendments 10 HP, size 80x65 Head 3...

•

Providing. Laying and Fixing of GI pipes conforming to 15 1239:1990 with late amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including ...

•

Providing. Laying and Fixing of Gl pipes senforming to IS 1239.1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials tools an...

•

Supply and delivery at site brand new best make pressure guage suitable for centrifugal pump confirming to latest IS standards pressure guage 100MM.Complete as per Specification with the direcations ...

•

Supply and delivery at site brand new best make level guage suitable for centrifugal pump confirming to latest IS standards.Complete as per Specification with the direcations of Engineer in Charge of...

•

Supply and delivery at site brand new best make Starter control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments For 7.5 to 10 HP centrifugal Pump.Co...

•

Supply, delivery, erection and commissioning at ite lighting distribution board suitable for monoblock centrifugal pump confirming with ISI Jork and its latest amendments. Complete as per Specificati...

•

Supply, delivery, erection and commissioning at site ELCB suitable for monoblock centrifugal pump confirming with ISI mark and its latest. Complete as per Specification with the direcations of Engine...

•

Supplying and fixing LT cable of size 4 x 25 Sqm 10 suitable for centrifugal pump sets with ISI mark and its latest amendments.Complete as per Specification with the direcations of Engineer in Charge...

•

Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump upto 10 HP confirming with ISI mark and its latest amendments.Complete as per Specification with the direcatio...

•

Supply and delivery at site of brand new best make

•

non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 80 mm.Complete as per Specification with the direcations of ...

•

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 80 mm.Complete as per Specification with the direcations of Engine...

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-1) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

•

Supply and delivery at site Accessories for Single Phase pumpset like SS Groove Nipples, SS Studs & Nuts, Screw Clips & water proof Insulation Tape etc complete with ISI mark. Complete as per Specifi...

•

Labour charges for erection of outdoor type panel

•

board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., com...

•

Providing, and fixing suitable for 1.1 K V class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc. with necessary materials and ...

•

Labour charges for erection, Elecrtification and commissioning of pump sets, including alligning and balancing of all items including supply and erection of two pair of supproting clamps, bore well ca...

•

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipements on the meter board in the pit. The pits should be filled up with equal proportion of ...

•

Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1983 with latest amendments from KPTCL pole to meter board unit, with all necessary materials tools an...

•

Providing main connectionfrom poel PVC insulated sheathed steel wire cable n new trench as per IS 1554/1988 with latest amendments with ISI mark from KPTCL poel to meter board unit.Complete as per S...

•

Providing main connectionfrom poel PVC insulated sheathed steel wire cable in new trench as per IS 1554/1988 with latest amendments with ISI mark from KPTCL poel to meter board unit. Complete as per ...

•

Providing, Supplying and fixing suitable for 1.1 K V class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts, nuts and washers etc. with necessary mater...

•

Providing wrought mild steel ( galvanized) GI collar confirming to IS 1239-II 1991 with latest amendments if any. For 100mm dia GI collar. Complete as per Specification with the direcations of Engine...

•

Supply and delivery at site wrought middle steel ( galvanized) GI elbow confirming to IS 1239-II 1991 with latest amendments if any. For 100mm dia GI elbow. Complete as per Specification with the di...

•

Supply and delivery at site wrought middle steel ( galvanized) GI Bend confirming to IS 1239-II 1991 with latest amendments if any. For 100mm dia GI Bend. Complete as per Specification with the dir...

•

Supply and delivery at site wrought middle steel ( galvanized) GI tee confirming to IS 1239-II 1991 with latest amendments if any. For 100mm dia GI TEE. Complete as per Specification with the direc...

•

Supply and delivery at site wrought middle steel ( galvanized) GI socket confirming to IS 1239-II 1991 with latest amendments if any. For 100mm dia GI socket. Complete as per Specification with the...

•

Supply and delivery at site wrought middle steel (galvanized) GI plugs confirming to IS 1239-II 1991 with latest amendments if any. For 100mm dia GI plugs. Complete as per Specification with the di...

•

Supply and delivery at site wrought middle steel (galvanized) GI back nut/check nut confirming to IS 1239-II 1991 with latest amendments if any. For 100mm dia GI Back nut/check nut. Complete as ...

•

Supply and delivery at site wrought middle steel (galvanized)GI hexagonal nipple confirming to IS 1239-II 1991 with latest amendments if any. For 100mm dia GI hexagonal nipple. Complete as per ...

•

Lowering, Laying and Jointing GI pipes confirming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fitting) with cuts and threads wherever necessary, includng te...

•

PVC PIPE LINE :-Earth work excavation for pipe line trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, ca...

•

Earth work excavation for pipel line trenches by mechanical means width as per drawing and technical specifications, including settinng out, constructions of shoring, strutttng, barricadig , cautio l...

•

Refilling available earth around trenches/pipelines, cables in layers not

•

exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

•

Providing, layingand jointing HDPE pipes of specified grade and confirming to IS 4984-2016 with latest ammendments and conveying to worksite including loading and unloading at both destinations and ro...

•

Lowering, laying and fusion welding Jointing for HDPE Pipes Grade PE 80 / PE-100 conforming to IS 4984-2016, of specified dia. including hydrualic testing and commissioning etc. (Contractor will make ...

•

Providing and installation of Class SN8 double Wall Corrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and...

•

Providing and installation of Class SN8 Double Wall Corrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and...

•

Providing and fixing kinetic AIR VALVE PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845/EN 1074-4. Body and bonnet of DI conforming to IS- 1865 of gr...

•

PUMP HOUSE:-Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of Buliding & bridges and such simillar works in all kinds of soils,...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils, as per drawing and te...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement: 6 coarse sand).Complete as per Specification with the direcations of Engineer ...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand) incl...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The g...

•

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) including rounding off comers wherever required smooth rendering, providing and removing scaffolding, including cost of ma...

•

Providing White washing with lime to give an even shade New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions o...

•

Distempering with dry distemper of approved brand and manufacture (two coats) of required shade on new work, over and including water thinnable priming coat to give an even shade after thoroughly broo...

•

Finishing walls with textured exterior paint of required shade New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even s...

•

DELIVERY CHEMBER:- Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils, a...

•

Supplying, fitting and placing TMT FE 550/ 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying...

•

POWER SUPPLY ARRANGEMENTS:- Supply and errection of RCC 9 mts pole 145 Kg WL As per Gescom specifications including materials cost, labour charges for Excavation of pit & Eraction of pole. Complete wi...

•

Supplying 11 KV horizontal cross arm with one HTST support and clamps, bolts and nuts for RCC Poles including labour charges for fixing of Arm. Complete with all lead and lifts including loading and u...

•

Supplying and fixing of DP structure with 9 Mtrs. Long RCC pole including material cost, D.P set Kit, Labour charges for excavation of pit & Eraction of DP set kit.Complete with all lead and lifts inc...

•

Supply and fixing 11 KV pin insulator for extension of HT line with all lead and lifts including loading and unloading as per specification with the directions of Engineer-in-charge of the work.

•

Supply and fixing 11 KV 45kn. Polymeric insulator Complete with all lead and lifts including loading and unloading as per specification with the directions of Engineer-in-charge of the work.

•

Supply and fixing at site Guy Set with 2-No of 15 strain insulator making use of 7/3.15mm 7/10swg) galvanized steel wire with turn buckle and acchoring arrangement with necessary eatrh work excav...

•

Supplying Conveying & stringing Rabbit ACSR conductor including Materials cost & Labour Charges for Stringing of Rabbit conductor. Complete with all lead and lifts including loading and unloading as p...

•

Supplying & fixing of LT-4 pin cross arms with pole clamps, bolts, nuts and washers including labour charges for Fixing of LT-4 X arm. Complete with all lead and lifts including loading and unloading ...

•

Supplying & fixing of No.8 KV strain insulator Complete with all lead and lifts including loading and unloading as per specification with the directions of Engineer-in-charge of the work.

•

Supplying & fixing of No.1.1 KV Polymeric pin insulator Complete with all lead and lifts including loading and unloading as per specification with the directions of Engineer-in-charge of the work.

•

Transformer center Supply, errection and commissioning of 100 KVA, 11KV/433V 5 Star transformer with all accessories as per Gescom including Materials cost, D.P set for T.C, 11KV 200 Amps Single GOS, ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

detailed_specification (4).doc

Others - SPECIFICATION • 0.61 MB

general_specifications_admin (1) (2).pdf

Others - SPECIFICATION • 0.20 MB

Kolabal DTS 01.02.2025 - Copy.doc

Tender Document • 2.00 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].