Construction Work

Amount

Dismantling, clearing away and carefully stacking the materials useful for reuse of Weathering course and pressed tiles etc. complete complying with standard specfication and as directed by the departmental officers.

Dismantling, clearing away and carefully stacking the materials useful for reuse of Brickwork in CM walls under 3m height etc. complete complying with standard specfication and as directed by the departmental officers.

Dismantling, clearing away and carefully stacking the materials useful for reuse of RCC works etc. complete complying with standard specfication and as directed by the departmental officers

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers.

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/mᶾ and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

For Super structure in Third Floor.

For Super structure in Fourth Floor.

For Super structure in Fifth Floor.

For Super structure in Sixth Floor.

For Super structure in Terrace Floor.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Brick work in following Cement Mortar 1:6 using Fly Ash Bricks of 230 x 110 x 70mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specifiction.

For Super structure in Third Floor.

For Super structure in Fourth Floor.

For Super structure in Fifth Floor.

For Super structure in Sixth Floor.

For Super structure in Terrace Floor.

Weathering course in brick jelly lime concrete using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) in the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required design, slope and consolidated to the required finished thickness by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete complying with standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Brick partition walls of 11.50cm thickness using best quality Fly Ash Bricks of size 230 x 110 x 70 mm in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

For Super structure in Third Floor.

For Super structure in Fourth Floor.

For Super structure in Fifth Floor.

For Super structure in Sixth Floor.

Lime concrete using broken brick jelly of size 40mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Providing, mixing, laying polymer based water proofing treatment for the Sunken toilet by applying cement based, flexible, water proofing compound confirming to IS:2645, to a thickness of 1mm of the prepared surface of the roof slab/floor slab as per specifications mentioned above providing cement mortar 1:3, water proofing cover plaster to a thickness of 12mm over the membrane coating with admixture of approved make. Rate quoted is inclusive of preparation of surface, which includes cleaning of surface polymer mortar curing, labour, tools and equipment, etc. Rate inclusive of cement and sand required for the treatment, the cost and labour charges for fixing 25mm dia pressure pipes 15kg/cm2 to a length of 45cm for drip pipes, etc. complete.

Paving the floor with best branded quality Full Body tiles 1200x600x10mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best brandaed quality Double charged Vitrified Antiskid tiles 600x600x8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Dadooing walls with following best approved branded quality, white / colour tiles of 600x600x8mm sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Dadooing with granite tiles of synthetic grey, paradise, and similar varieties of suitable sizes etc., complete

Providing and Fixing of PVC Trims (Corner beeding) at the outer corner profiles of the tiles including cost of material, labour and handling etc. as directed by departmental engineers at site of work and as per standard specification.

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

160 mm dia

110 mm dia

FRAME:Fully Solid Core WPC-75MMX50MM:Providing and Fixing of Qute WPC/PVC Solid Door frame extruded with size 75mmx50mm.The inner core made of rigid WPC Compound with minimum shore hardness of 55,and Bulk Density 0.8 Grms/Cub.C.mt.The frame shall be fixed fixed to the wall using 10x100mm long M.S.Screw through the frame by using PVC Fasteners.A minimum of 4nos screws to be provided for each vertical member

Supplying and fixing solid core particle board flush shutter of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with teak ply on one side and commercial ply on other side with teak wook lipping alround 35 mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .200x12mm aluminium tower bolt 2nos. 150x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.

Double Leaf

Supplying and fabricating and fixing in position Aluminium natural colour matt finish partly top 1/2 galzed and partly bottom 1/2 panelled door and frame made out of box section 101.6x44.45x3.18mm thick at 2.319 kg\m door shutter made out of box section 47.1x44.45x2.5mm at 1.202 kg\m for vertical style and top, lock rail sections of size 50x44.50x2.5mm @ 1.292 Kg/m and bottom 100.4x44.45x2.50mm at 1.974kg\m using clips of size 17.15x17.27x1.5mm at 0.176 kg\m with necessary metal screws, rubber beading, strike plate type handle of size 100x30x1.60mm at 0.988 kg\m on both sides, tower bolts, lock pivot arrangements and top 1/2 portion with 5.50 mm thick forested glass and bottom 1/2 portion with both side prelaminated board ( MDF ) 12mm thick for panel portion with 1 No. of hydraulic door closers of approved quality using aluminium extruded section body tubler type universal with double speed adjustment with ISI monogram including cost of furniture fitting such as Pivot, hinges, Tower bolt, lock, door stopper and all materials labour power consumption required for fabrication drilling required for fabrication drilling holes in RCC columns floorslabs masonry wall wherever necessary with power drills to the required extent and make the same to original condition after fixing and as directed.(Qty as per CC I & Final Pg.no:45/ M-Book-2136). All the aluminium sections are to be matt finish under electrically controlled condition in accordance with IS 1868-1962 for an average anodic flim thickness of 15 microns etc., complete. The materials should be got approved by the Executive Engineer before use on works.

Supplying Fabricating and placing in position of Aluminium natural colour matt finish fixed Partition top half glazed with 5.50mm thick plain glass and bottom half with medium density fibre board of 12mm thick both side pre laminated for cubical and the outer frame of the Aluminium section of size 101.60x44.45x3.18mm @ 2.319Kg/m. at internal vertical 2 Nos & Horizontal 1 No, mullion of aluminium section of size 62 x 38 x 2mm @ 1.174 Kg/m with necessary aluminium clips of size 79.15 x 17.27 x 1.50mm at 0.176 Kg/m with necessary rubbor beading L angles including dismantling and redoing masonry as concrete where necessary etc., complete. The Aluminium section are to be anodised with matt finish under electrically controlled condition in allfdjsfdslk with ISI 1868 / 1962 specification for an average anodie film thickness of not less than 15 microns. All aluminium sections are should be got approved by Engineer incharge before use on works.

Supplying and fixing of wood polymer composite (WPC) door with solid door frames extruded with size 75mmx50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55 and buld density 750kg/cub.Mt. The frame shall be fixed to the wall using 10x10mm long MS screw throught the frame by using PVC fasteners. A minimum of 4nos screw to be provided for each vertical members, Door Shutter of 25mm thick Wood Polymer Composite (WPC) single core Extruded Door Shutter, with one side digital printing of specified Design which is approved by engineering-in-charge. Both side of the shutter shall have rough sugar texture finish, laminated with UV oil. The solid WPC board shall have minimum shore hardness of 55 and Bulk density 550kg/cub.Mt moulding the thickness remains 25mm (+/-1mm) etc. complete as per the direction of the departmental officers.(make Qute / Equivalent)

Supplying and fixing of PVC Sliding Door with Roller etc., complete.the should be got approved by the Engineer-in-charge before use on works.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) windows of casemetn type (open) from the profile the size of outer frame 60mmx58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multichambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered wtih over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle, The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it shoudl not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames, The window should be got approved from the Executive Engineer before use on works.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supplying and fixing of M.S. Grill of approved design for doors, windows, open courtyard, Grill gate etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Providing expansion joint of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non-absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting the walls with Texture painting for good and elegant look in elevation and including cost of texture paint, brushes, scaffolding charges etc., including thorough scrapping, clean removal of dirt wherever required etc., complete complying with standard specification.

Supplying and applying of two coats of Putty 3mm thick over the exposed RCC Surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be througly cleaned out of dust and scrubbing the surface shall than be allowed to dry for atleast 48 hours. It shall be than sand papered (Waterpoof abrasive sheet) to give a smooth and even surface. any uneveness shall be made good by applying 1 st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2 nd coat of putty after 6 hours of 1 st coat of putty and then sand papering ( Waterpoof abrasive sheet) the same after its dry and finishing the surface smoothy etc.,complete complying with standard specifiction and as directed by the departmental officers.(The rate inclusive of hire charges for grinding machine with wheel,cost of sand paper(Waterpoof abrasive sheet) cost of putty blade,labour charges for grinding the joints and sand papering,two coats putty,scrapping the putty area to level the surface smooth etc., complete). The putty should be got approved by the Execuctive engineer before use on work.

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Providing and fixing 8mm thick Calcium Silicate Board Designed and Perforated for False Ceiling which includes shaped GI channels of size 25x25x0.50mm thick suspended from ceiling at 1.2m both longitudinal and ross vertical support and fixing shaped GI channels of size 50x30x0.50mm and 150x10x0.50 mm thick at 0.60m centre longitudinal and cross difrection for vertical supports anf fixing U shaped GI channels of size 50x30x0.50mm thick and 50x10x0.50mm thick at 0.60m centre to centre in cross direction and respectively forhorizantal supports of zig-zag pattern and fixing of alcium Silicate Board in the Panel provided in the design pattern given and sparting the standard spection and as directed by the departmental officers. the rate shall be inclusive of finishing the edges and wall junctions with suitable lipping and cornice arrangements.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position white colour glazed Special delux model Glazed Cascade type (parryware/hindware/equivalent wall mounted) European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity PVC low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.....

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing in position best approved quality CI Nahini trap of 110mm x 75mm size with stainless steel grating of approved quality fixed over a bed of brick jelly lime concrete 1:2:5(one lime two sand and five brick jelly) using 40mm broken brick jelly including dismantling the flooring concrete / Brick masonry wherever necessary and redoing the disturbed portion to the original condition and giving in connection to the PVC soil (stacks)pipe as directed etc., complete complying with standard specifications. (The PVC Nahini trap should be got approved from the Executive Engineer before use on works.)

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

75 mm dia

110 mm dia

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

75mm dia

PVC Bend

PVC Door Elbow

PVC Door Tee

110mm dia

PVC Bend

PVC Door Elbow

PVC Door Tee

Supplying, laying and jointing UPVC Pipes of approved quality and best variety of "B" class pipe of the following dia including labour fixing UPVC Specials, (excluding charges for cutting and threading of pipes, cost of such specials) to wall with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc., making holes on the walls (or) drilling holes in roof and making good the dismantled portions to original condition with necessray brick work / concrete and plastering wherever necessry with necessary scaffolding charges. The pipes are to be painted with the 2 coats of good variety and approved best quality of synthetic enamel paint over a priming coat of red oxide etc., complete in all floors complying with standard specification. UPVC shall be got approved by the Executive Engineer before use on works.

40 mm dia

32mm dia

25 mm dia

20 mm dia

Supplying and fixing in position the following UPVC Specials of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and threading of UPVC pipes, jointing the UPVC specials and painting with two coats with good variety and best quality synthetic enamel paint over a coat of red oxide primer and jointing the specials with pipe line using shellac etc., complete complying with standard specification. (The UPVC specials should be got approved by the Executive Engineer concerned before use on works.)

40 mm dia

Elbow

coupler

Reducer 40x 32 mm

32 mm dia

Elbow

coupler

Reducer 32x 25 mm

25 mm dia

Elbow

coupler

Reducer 25 x 20 mm

20 mm dia

Elbow

coupler

32 x 25 mm Reducer Elbow

32 x 25 mm Reducer tee

25 x 20 mm Reducer Elbow

25 x 20 mm Reducer tee

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

40 mm dia GM Gate Valve

32mm dia GM Gate Valve

25mm dia GM Gate Valve

20mm dia GM Gate Valve

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).

Supplying and fixing approved best quality Stainless steel Health Faucet etc., complete complying with standard specifications. (The Health Faucet should be got approved by Executive Engineer before use on works).

Supplying and fixing of Stainless steel sink of approved quality and brand including labaour charges for fixing etc. complete

Supplying and fixing of White Marble partition slab for Urinals of 1200 x 600mm size fixing to wall using 3 nos. of suitable C.P brackets with C.P bolts, nuts, washers, cutting to the shape, polshing to all the exposed surfaces abd edge grinding etc. complete as directed by the dapartmental officers

Drilling of bore well any where in tamil nadu including transportation from one place to another place with in tamilnadu alluvial soil or sedimentary strata of clay and sand or sand, stone, shale, pevles, boulders etc,.By first taking pilolt bore of 140mm / 150mm dia and then enlargiing to required dia direct or reverse rotary mud circulation method using rotary rig, fuel, labour drilling, netonite mud and water required for drilling at the site ( site will be shown by the Officers) inclusing construction of mud pit.

Drilling 140/ 150mm dia pilot bore upto 60m depth ending below groundlevel.

Reaming from 140/150mm pilot bore to 300mm dia bore as directed by the departmental size bore as directed by the departmental officers upto following Depth ending from ground level..

upto 60m Depth ending from ground level..

Supplying unplasticised ribbed screwed PVC casing pipes without slot of pressure 6 KG/m2 in the drilled hole of the following dia 3 m length with screwed and socket ends and cantering ruide for every 15 m length of pipes as per ISI 12818/1992 including welding the joints supplying and pouting the annular space with pebbles of size and quality etc, complete

160mm dia plain PVC casing pipe Plain (cs)

160mm dia plain PVC casing pipe Slotted

Labour charges for insetring 150mm dia PVC.Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with the PVC Coupler with cement paste etc,.complete.

Charges for developing the bore well with air compressor of capacity 600cfm/150PSI for a minimum 8 hours until clear water is obtained including transportation charges for air compressors etc., complete

Supplying of best and approved quality of HDPE 40 mmdia pipe of the following size including laying in the borewell and tying with copper wire etc., complete complying with standard specification

Supplying and fixing of 4 s.g.m suborergible cable ISI make by appproved quality etc,. Complete.

Supplying and fixing of 20mm dia Nylon rope for submersible motor of approved quality in etc,complete complying with standard specifications.

Supplying abd fixing of 160mm dia PVC and cap for bore well

Supplying and fixing in position of 5 HP submersible motor including starter and other accessories etc.,

Supplying and fixing best quality and make of ready ,made PVC tank (Made of HDPE materials) of the following litres capacity as directed withh all accessories like cover lo0cking arrangements etc., including conveying jointing delivery line scour pipe, over flow pipe etc and lifting the tank to the top of the building placed in position at the place as shown by the departmental officers etc., complying with standard specification a)5000 litres PVC water tank

Providing rain water arrangements by earthwork excavation in loose or hard soil to a depth of 90 cm and 100cm diameter and filled with 40 mm brick jelly to full depth and RCC well rings of 90 cm dia to adepth of 1.20 m and covering the top with precast slab of 75mm thick etc. complete

Reverse Osmosis Plant 500 lit/hr. The RO Plant - 1 No. Consists of Raw water feed pump-1 No. -Make: CRI – specification: 1000 Liters/hr @ 3.5 kg/cm2 -single phase, Dual Media Filter- DMF-1354- 1 No, Make: FRP ,Specification : Filter Medias 1 Lot- Holdup volume-105 Liters, MPV- 1 No - Make – Initiative-Specification - 25 NB, Specification 20"-5 Micron, High pressure pump-1 No- Make CRI- specification flow rate 1200 liters/hr@13 kg.per cm2 2 HP Single phase, Membrane housing -2 Nos. Make Aventura – ROH/UKL; specification 4 “Dia 40“length 300 PSI, RO Membrane - 2 Nos. Make Filmtec/CSM or Equivalent; specification 4040, RO Skid - 1 No. specification SS 304, Inter connecting pipe works - specification, UPVC line from feed pump to HP Inlet, CPVC – 1 Lot – RO high pressure Line, Flow meter - 2 Nos, Float - 1No, Pressure Gauges - 2 Nos ; LPS -1 No NOTE: The Above plant is warranted for ONE YEAR inclusive of services and all spares.

Medical Gas Copper Pipeline arrangement to hang on the wall of socket type connection installation of seamless cleaned and degreased non arsenical phosphorous gas copper pipe line with saddles complete with brazing work including all copper fitting (tee, elbow, reducer, coupling). The copper pipelines should be tested suitable for a steam of working pressure of 17.34 kg. / cm2 (17 bar) and confirm to BS 864 Standard with specially made for brazed socket type connection. The medical gas copper pipeline should be tested as per standard and commissioning after painting as per International Code No. IS 2379/1963 Table-V. The pipelines installed at the various wings and floors etc., complete as directed by the Departmental Officers as per IS Code 12827 / 1989 & ISO 7396 / 1987 Specification.

10mm OD 0.90mm thick copper pipe

15mm OD 0.90mm Thick Copper Pipe

22mm OD 0.90mm Thick Copper Pipe

28mm OD 0.90mm Thick Copper Pipe

42mm OD 1.20mm Thick Copper Pipe

DIN / BS Standard Outlet Points with from loading, inner connecting and brass body. Single press inlet with two stage process first stage for patient usage and second stage in parking mode, covered by plastic cover duly colour indicated with specific gas name and non inter-changeable for other gases. The cost of materials inclduing transport, etc., complete, as per standard specification and as directed by the Departmental Officers

Brass Isolation Valve suitable for the copper pipe and should be of non lubricated 90 degree turn lever ball valve of reputed make, conneced in line with medical gas pipe line system by using suitable size brass valve adopter union, ferrule, nipple, rubber "O' ring, tapion lap and etc. All pipe line regulators shall be capable of controlling pipe line pressure and must compatible with the requirements specified in IS 12827-1989. All valves should be pneumatically tested for twice the working pressure for the gas line as per IS Code 12827 / 1989 & ISO 7396 / 1987 Sepecification.

15mm Isolation Valve

22mm Isolation Valve

28mm Isolation Valve

42mm Isolation Valve

Oxygen manifold arrangements of 2 banks x 12 cylinder each wing with semi automatic control panel which includes contact gauge 2 Nos., outlet pressure gauge, brass heavy duty IO x regulator 2 Nos. with suitable adopter, flexible SS Hose. Mainfold shall be of a construction and of a designs and material suitable for the service pressure in accordance with IS 1282- 1989. Emergency alarms with illuminating display for low / high pipeline pressure and malfunctioning of system. 1) Mainfold top frame with provision for connecting 12 cylinders on right bank and 12 cylinders on left bank with high pressure interconnecting copper tubing, silver brazing, non return valve, fasteners and cylinder spport middle angle frame for claping 2 x 12 cylinders and related fasteners. The O2 manifold should with stand a pressure of 140 kg. / CM2. The installation is commissioned after testing as per standards and painted as per International Code and as directed by the Departmental Officers as per IS Code 12827 / 1989 & ISO 7396 / 1987 Specification.

Supply, installation, testing and commissioning of equivalent to Ingersoll Rand Reciprocating Air Cooled Type (10 HP) Rating Vaccum Pump as per following provisions. As per IS 12827 / 1987 & ISO 7396 / 1987 Specification a) Vaccum Pump - 10 HP - 1 No. b) Electric Motor - 10 HP - 1 No. c) DOL Starter with OLR - 1 No. d) Vaccum Switch - 1 No. e) Vaccum Gauge - 1 No. f) Control Frame with Fittings - 1 No. g) Suction Scrubber - 1 No. h) V-Belts - 1 No. i) GI & MS Fittings - 1 No. j) Brass Fittings - 1 No. k) Exhaust Silencer - 1 No. i) Base Frame for Motor and Vaccum Pump - 1 set m) Pilot Line with Fittings - 1 set, Vaccum Room & Air Compressor Room Inside

Supply, installation, testing and commissioning of Compressed Air System of Reciprocating Oil Free Air Compressor Belt Driven Type 10 HP Air Compressor with following provisions. As per IS 12827 / 1987 & ISO 7396 / 1987 Specification Compressor package consists of following: a) 10 HP Air Compressor - 1 No. b) Electric Motor 10 HP - 1 No. c) Dol Starter - L&T - 10 HP - 1 No. d) Base Frame Kit (for Motor and Compressor) - 1 set e) Pressure Swith - 1 No. f) Pressure Gauge - 1 No. g) NRV and Pilot Fittings - 1 No. h) Delivery Tube - 1 No i) Foundation Bolts & Anchor Fasteners - 1 Lot j) Belt Guard - 1 No. k) Refrigerator Type Air Dryer-40 cfm. capacity-1 No. l) Drain Ball Valve - 1 No. m) Air Outlet Ball Valve - 1 No. Vacuum Room & Air Compressor Room Inside Accessories: Non-Return Valves, Air Pressure Switch, Pressure Gauge, Isolation Valves, Air Filters etc., Inter connecting piping: Mild Steel Pipe of 2" with fittings.

Supply, installation, testing and commissioning of MS Fabricated Vertical Mounted Type 1000 liters capacity Vaccum Receiver with inlet and outlet and drain holes provided suitable to operate with vaccum pump, etc., as directed by the Departmental Officers.

Supply, installation, testing and commissioning of MS Fabricated Vertical Mounted Type 1000 liters capacity Compressed Air Receiver with inlet and outlet and drain holes provided suitable to operate with vaccum pump etc as directed by the Departmental Officers.

Nitrous Oxide Manifold Arrangements of 2 banks x 3 cylinder each wing, with automatic control panel which includes contact gauge 2 Nos., outlet pressure gauge, brass heavy duty IOX regulator 2 Nos. with suitable adopter, flexible SS hose. Mainfold shall be of a construction and of a designs and material suitable for the service pressure in accordance with IS 1282-1989. Emergency alarams with illuminating display for low / high pipeline pressure and malfunctioning of system. 1) 2 x 3 cylinder Nitrus Oxide Manifold should be suitable with stand a pressure of 140 Kg. / Cm2 and above along with high pressure copper annealed tail pipes with end brass adapter suitable for Nitrous Oxide Cylinders and manifold. 2) Top frame comprising of high pressure copper pipes of size 12mm ID 1.5mm wall thick with high pressure brass fittings made of high tensile brass and connections through non-return valves, high pressure copper tail pipes made of high pressure copper pipe size of 7mm ID x 1.5mm thick. 3) The design of middle and bottom frames should be provided to fit both round and flat bottom cylinders safely with fitted heavy duty regulator. The Manifold should be tested at 3500 pig as per IS 12827 / 1989 & ISO 7396 / 1987 Specification.

Bed Head Panel of size 1m length, height 0-0.30 cm and depth of 4". The aluminium powder coated with requirement colour for provision points of O2-2 Nos., Air 1 No., Vaccum 1 No. with double electrical socket with switch 2 Nos. with 2 set with 1V - bottle holder fixing to the wall hanging including monitor stand etc., complete.

Supplying and fixing in position of 53cm wide Built-in cup-board made of 18mm thick water proof plywood used for rear and sides of cupboard and shutters made of 18mm thick water proof plywood . Inner side to be separated by number of racks with 18mm thick water proof plywood. All the surface is covered with 1.00mm thick mica of approved colour.The shutters are fixed to the frame with required fixtures like aluminium hinges 100x30mm, ornamental handle 100mm, aluminium tower bolts 75x10mm,and cupboard lock, etc., All materials and furniture fittings used on work should be got approved by the Engineer incharge before use. The cost includes cost of all materials labour charges etc.,

Supply, erection, testing and commissioning of Fire Fighting Application Horizontal Centrifugal Type Pump Rated for 2280 LPM at 70 metres head with Electrical Motor of 60 HP of 415 volt 3 phase connection complete with base plate and accessories. (Make: Kirloskar or Equivalent). The rate inclusive of necessary vibration, bad mounting etc., as per standard method as directed by the Deparmental Officers

Supply, installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of following and complete in all respects as required. a. End suction, top discharge centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg. / sq. cm at highest and farthest outlet at specified flow of 2280 LPM at 70m head conforming to IS 1520. b. 68 BHP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete. Auto starting mechanism, 12 volts / 24 volts electric starting equipment like self motor, dyanamo, solenoid switches etc. c. 110 litres capacity diesel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle, providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre-filter, after filter etc. (Make: Kirloskar / Equivalent).

d. Exhaust system having flexible metallic mufler, 100mm dia MS heavy pipe extended upto 1m, outside pump house duly insulated with 50mm thick glass wool with 1mm thick aluminium sheet cladding, residential silencer with necessory MS support arrangements from wall or ceiling as per site condition.e. Dash board consisting the instruments like temperature gauge, galvano type DC Ammeter, lubricant oil pressure gauge, ignition switch, emergency stop and all other protection equipment as per specification, stop seleneid for auto stop in the event of fault with audio indications, painted with post office red colour etc., as required. f. 12 V / 24 V storage battery, maintenance free tape, 180 AH rating, MS fabricated common base plate, coupling guard, foundation bolts etc., as required. g. Positioning the diesel engine driven fire pump over cement concrete foundation using suitable size anti-vibration mounting arrangement. All works carried out as per standard methods and as instructed by the manufacturer and as directed by the Departmental Officers. (Make: Kirloskar / Equivalent)

Supply, erection, testing and commissioning Mono Block type Fire Fighting Pressurisation Pump of 180 LPM 110 metres head at 10 HP with suitable base frame including necessary vibration bad mounting etc., including conveying, fixing and incidental charges., etc., complete as per standard specification and as directed by the Departmental Officers. (Make: Kirloskar / Equivalent)

Supply and laying of following sizes of Armoured Aluminium Cables for electrical motor, control panel, pressure switch, jockey motor etc.. The rate inclusive of all incidental charges, neccessary scaffolding and redoing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT.

3 core 10 sq.mm. armoured aluminium cable

2 core 1.5 sq.mm armoured multi strand aluminium

Supply and laying of following sizes of Armoured Aluminium / Copper Cables for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT. 10sq mm

Wrapping and Coating Anti-Corrosive Treatment for under ground MS pipe having one coat of anti-corrosive metal primer, one layer of asphalt tar tape wound over the MS pipe as per standard methods as per standard specification as directed by the Departmental Officers 200mm

Supply, erection, testing and commissioning of following MS „C‟ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table „E‟, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT.

200mm nominal dia

150mm nominal dia

100mm nominal dia

80mm nominal dia

50mm nominal dia

40mm nominal dia

25mm nominal dia

Wrapping and Coating Anti-Corrosive Treatment for under ground MS pipe having one coat of anti-corrosive metal primer, one layer of asphalt tar tape wound over the MS pipe as per standard methods as per standard specification as directed by the Departmental Officers 80mm

Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table „E‟, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT

Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table „E‟, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT.

Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Nonreturn valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table „E‟, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers

Supply, erection, testing and commissioning of following sizes of Heavy Duty Foot Valve including all accesories, such as, MS flange of table „E‟, gaskets, bolts & nuts, etc., installed at end of 150 / 200mm dia suction pipe line at sump including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete and as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT

150 mm dia

100 mm dia

Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., completed as per standard specification and as directed by the Departmental Officers. Make: DONFOSS / INDFOSS / ISI MAKE / EQUIVALENT.

Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: H-GURU / ISI MAKE / EQUIVALENT

Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.100mm

Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.100mm

Supply and providing 1000 litres capacity Priming Tank made up of PVC. Make: SINTEX / EQUIVALENT

Priming Tank mounted with the supporting arrangement fabricated using MS angle for the height of 3 metres from the floor level, inlet, outlet, and drain arrangements inside the fire fighting pump room, as directed by the Departmental Officers.

Supply and fixing in position of 12 Volt 180 AH Lead Acid, Sealed Maintenance Free (SMF) batteries with connecting leads, lugs terminal post, etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT.

Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR/ LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT

Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply and fixing in position of Fire Fighting Duct Window having proper glass window type double door with universe open key, painted inside white and outsid post office red for the sizes of 1300 x 900 x 500mm (L x B x D) fabricated using 25 x 3mm MS 'L' Angle and all sides covered with 2mm thick MS sheets, suitable arrangements to kept 2 Nos. of Fire Fighting Hoses and 1 No. Branch Pipe, mounted in fire duct using anchor fasteners, etc., as per standard specifications and as per directed by the Departmental Officers.

Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT

Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR / EQUIVALENT

Supply, erection, testing and commissioning of Fire Fighting 4 Way Fire Brigade Inlet with necessary gun metal 63mm dia non return spring shutter arrangements, so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KIARTAR / OMEX / EQUIVALENT

Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpset of 900 LPM at 40 metres head to develop 3.5 kg/sq.cm at the heightest and farthest hydrant point to make 30 m water jet at the time of fire fighting emergency cicumstances, coupled with 11 KW / 15 HP rated three phase 414 volts, 50 Hz, 2880 rpm electrical motor the pump with cast ron body, bronze impeller, rope gland packaging, suction size of 80 mm dia. delivery size of 65 mm dia., including the cost of foundaton concrete anti vibration mounting, rain safety hood and etc. complete as directed by the Departmental Officers (Kirloskar make KDS 1555+ or Equivalent)

Supply and laying of 4 core 10 sq.mm. armoured copper cable for power wiring to the Terrace Pump Motor with runs of 14 SWG TC wire for earthing, providing in wall with suitable size GI clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc., as directed by the Departmental Officers.

Supply and laying of 2 core 1.5 sq.mm. armoured copper cable for control wiring to the Terrace Pump Motor with runs of 14 SWG TC wire for earthing, providing in wall with suitable size GI clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc., as directed by the Departmental Officers

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply, Installing, testing and commissioning of Stainless Steel Corrugated Flexible Braided Pipe (Hose) for dropping sprinklers below false ceiling. Pipe shall be 16 bar pressure rating and 1000mm long, 25mm dia with union / reducer, collar, clamps, etc. It shall have UL listed and FM approved.

Supplying and installing of approved type Rosette Plates (Recessed Type in Two Pieces) for sprinklers below false ceiling area. The Rosette shall be fabricated by MS plate of 2mm thick and the finish shall be powder coated and colour, as directed by the Departmental Officers.

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Supply & Installation of Gun Metal Ball Valve of size 25mm dia size including necessary Fittings

Supply & Installation of Gun Metal Ball Valve of size 12.5mm dia size including necessary Fittings

3c x 35Sqmm Aluminum Armoured Cable for Main Electrical Pump

Supply & Installation of in position the sign board of "EXIT " with arraow to be placed at walking pathways by fixing on walls to direct occupants to outside the buliding in an emergency. The Exit sign board will be autoglow photoluminiscent type which will glow at dark.(Single Side indication)

Supply & Installation of Fire Escape Route Plan Laminated Board Auto Glow Print to be placed at each floor by fixing on walls to direct occupants to outside the buliding in an emergency. The Fire Escape Route Plan will be autoglow photoluminiscent type which will glow at dark.(Single Side indication)

Supplying and laying red earth, sand and manur mixer as directed by the departmental officer. The proportion of red rod, sand and manure is 1:1:1 and load in layer of 10cm thick in a uniform layer. The cost including cost of all materials, labour for and laying in places as shown by the departmental officer etc complete.

Supplying and laying of korian grass bed over a prepared base including appplication of antitermite chemical like thimpet or purition, neem cake, root regulating fertilizers supply and planing of grass beds cutting the grass to the required or hamental shape etc and carrying out the base management for the turfing for a maintanecne period of three month etc. complete

Supplying and planting Arica Palms as directed by the Engineer in charge including digging holes in ordinary soils and refilling the same with manure, floating with water and dressing removal of rubbish , surplus earth Jif any with all lead and lift also maintenance of plant for a period of 90 days from the date of planting work.

Supplying and planting Specimen edge border Plants as directed by the Engineer in charge including digging holes in ordinary soils and refilling the same with manure, floating with water and dressing removal of rubbish , surplus earth if any with all lead and lift also maintenance of plant for a period of 90 days from the date of planting work.

Supplying and planting Polyalthia longifoliaTree (False Ashoka ) as directed by the Engineer in charge including digging holes in ordinary soils and refilling the same with manure, floating with water and dressing removal of rubbish , surplus earth if any with all lead and lift also maintenance of plant for a period of 90 days from the date of planting work.

Supplying and planting Vedicator Plants as directed by the Engineer in charge including digging holes in ordinary soils and refilling the same with manure, floating with water and dressing removal of rubbish , surplus earth if any with all lead and lift also maintenance of plant for a period of 90 days from the date of planting work.

Structural Glazing: Providing and fixing structural glazing fabricated from roll formed sections made of galvanized steel colour coated (Base steel as per IS 513 of 'D' quality, galvanized as per IS 277 with zinc of 120 grams / sqm.) with total coated thickness of 0.72mm. The glass holding section made of 304 grade SS of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel / powder coated sections as per the design requirement. Design calculations are made to suit wind pressures as given in IS 875. Paint Specifications: Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. Dimensions: The section should be of 37 x 53mm for frame vertical, 37 x 53mm for frame horizontal section and section for reinforcement should be of 31 x 55mm. glass holding section should be of 37 x 37mm for top and bottom grids in between should be of 37 x 18mm.Accessories: Brackets made of CRCA powder coated / electro plated should be used to fix vertical at top and bottom and vertical to slab as per site requirement. Polyurethane brackets should be used to connect horizontal section to vertical sections. Silicone: Natural cure, with good UV resistance to be used. The above frame should be fixed to brick / concrete masonry by using nylon self-expanding cap and driving MS electro plated 80mm long screws into the caps through frames. Glass: 5mm reflective Saint Gobain OR equivalent.

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End ) (DATA-A)

Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box inflush with wall with 6A two way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End.

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 1no.6A two module socket , 1 no. 6/16A two module socket, 1 no. 6A one module switch, 1 no.16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections.

Supply and fixing of 2 no. 6A two module socket, 1no.6/16 A two module socket , 2 nos. 6A one module switch, 1 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 4 of 10 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supply and Run of 4 of 16 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supply and fixing of 20W, 4 feet LED fitting with conduit pipe Suspension on ceiling with PVC unsheathed copper leads from terminals to the fitting

Supply and fixing of 20W, 4 feet LED fitting on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting

Supply and fixing of 40W LED UNECO fixed Down light HAVELLS make fitting on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting

Supply and fixing of 12W LED Astro Spot Light PHILIPS make from ceiling with PVC unsheathed Copper leads from terminals to the fitting with tubes

Supply and fixing of 2x2 36W LED recessed mounted Luminaries fitting (Havells Pluto Make) with conduit /chain suspension and with PVC unsheathed copper leads from terminal to the fitting with necessary connection.

Supply and fixing of WT bulk head fitting with guard suitable for LED with 7W bulb.

Supply and fixing of 1200mm (48”) Sweep AC ceiling fan (Crompton High speed) complete with stepped electronic 300W regulator with 0.3 mtr down rod on the existing clamp

Supply and fixing of 300mm (12”) sweep (light duty) AC Exhaust fan without provision of hole in the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A TP MCB switch as incoming and 9 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. (The DB and MCBs are of Hager make)

Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with earth connection only.

Supply and fixing of 8 way vertical TPN DB with acrylic door cover of IP 43 protection in sheet steel enclosure with 1 no. 63 A 4P MCCB as incoming and 24 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.(The DB and MCBs are of Hager make)

Supply and fixing of 8 way vertical TPN DB with acrylic door cover of IP 43 protection in sheet steel enclosure with 1with 1 no. 100 A 4P MCB Isolator as incoming and 2 nos. 32A 3P MCB , 18 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.(The DB and MCBs are of Hager make)

Supply and fixing of 32A DP MCB in sheet steel enclosure with wall with earth connection (For AC Plug)

Supply and fixing of 63A FP MCB in sheet steel enclosure with wall with earth connection (For AC Plug)

Supply and fixing of 100A FP MCB in sheet steel enclosure with wall with earth connection (For AC Plug)

Supply, Erection, Testing & Commissioning of 400A capacity cubical type panel board dust and vermin proof made of 16SWG sheet steel for outer body and stiffness and doors with main switches supports respectively of the following cubical mounting main switches with center bus bar chamber and vertical covers, and cable chamber on both side of the bus bar chamber at the extreme ends on both side and confirming in I.S specifications suitable for floor mounting type. (Incoming) 400A TPN switch disconnector fuse units interior switch only with HRC fuse double break -1no,- Hager Legrand /L&T /siemens /Equ. (Out Going) 250A TPN switch disconnector fuse units interior switch only with HRC fuse double break -5 no,- Hager Legrand /L&T /siemens /Equ. 125A TPN switch disconnector fuse units interior switch only with HRC fuse double break -5 nos,- Hager Legrand /L&T /siemens /Equ. Space for fixing display board. A Separate chamber on Top of one side should be built with one set of multi meter,[ammeter, volt meter, Hz. Meter with R Y B LED pilot lamps set with fuse base, top with 10A HRC link for 3 phases and CT coil (Siemens) the bus will have suitable 4 Nos. of 50 x 6mm bus for phase and 25x3 mm earth bus all round the panel to provide earth connection to the cubical

switches cable glands cable adopter box etc, bus should be mounted on synthetic enamel compound bus supports at equal interval as per IS specifications. The incoming 400A TP switch should be connected with 50X6 mm to the bus,250A switches with 37x6mm flat and 125A Switches with 25mmx6mm bus of rigid copper flat. The switches should be separated by 6mm thick hylem sheet separators and properly (double) earthed as per IE rules, CEIG specification. The panel should be Powder coated, the cable size capacity of switch location etc., should be marked with white paint and 2 Nos. metallic danger board affixed complete with mounting on base channel supports .

Supply, Erection, Testing & Commissioning of 250A capacity cubical type panel board dust and vermin proof made of 16SWG sheet steel for outer body and stiffness and doors with main switches supports respectively of the following cubical mounting main switches with center bus bar chamber and vertical covers, and cable chamber on both side of the bus bar chamber at the extreme ends on both side and confirming in I.S specifications suitable for floor mounting type. (Incoming) 250A TPN switch disconnector fuse units interior switch only with HRC fuse double break -1no,- Hager Legrand /L&T /siemens /Equ. (Out Going) 100A TPN switch disconnector fuse units interior switch only with HRC fuse double break -8 no,- Hager Legrand /L&T /siemens /Equ. 63A TPN switch disconnector fuse units interior switch only with HRC fuse double break -2nos,- Hager Legrand /L&T /siemens /Equ. Space for fixing display board. A Separate chamber on Top of one side should be built with one set of multi meter,[ammeter, volt meter, Hz. Meter with R Y B LED pilot lamps set with fuse base, top with 10A HRC link for 3 phases and CT coil

(Siemens) the bus will have suitable 4 Nos. of 37 x 6mm bus for phase and 25x3 mm earth bus all round the panel to provide earth connection to the cubical switches cable glands cable adopter box etc, bus should be mounted on synthetic enamel compound bus supports at equal interval as per IS specifications. The incoming 250A TP switch should be connected with 37X6mm to the bus and 125A Switches with 25mmx6mm bus of rigid copper flat,63A switches with 8 SWG copper rod . The switches should be separated by 6mm thick hylem sheet separators and properly (double) earthed as per IE rules, CEIG specification. The panel should be Powder coated, the cable size capacity of switch location etc., should be marked with white paint and 2 Nos. metallic danger board affixed complete with mounting on base channel supports .

Supply, Erection, testing & commissioning of 800A capacity vermin dust proof cubical panel of 14SWG fine quality MS sheet steel enclosure for accommodating 800A TPN Aluminium Busbar, raising mains of 2Runs of 100mm x 10 mm Aluminium busbar for 3 phases and neutral with 1 Run 100 x 10 mm Aluminium Busbar with 50 x 6 mm Aluminium flat for earth bus and with provision for accommodating incomer MMCB - 800 Amps adaptor boxes tap boxes including Aluminum Bus inter connection. (RM-1, RM-2, power/Lighting/AC/UPS rising mains) for connecting all utility sockests, raw power sockets, lighting distribution boards, UPS gadgets, for all floors)

Supply and fixing End Feed Unit and 4P 800A MCCB and flange End Unit

Supply and fixing of End Cover for the rising main.

Supply and fixing of 4P 250A, Tap off Box with MCCB

Supply and fixing of 4P 400A, Tap off Box with MCCB

Supply and fixing of Spring Support brackets

Supply and fixing of Rigid Support brackets

Supply and Fixing of wall support brackets for vertical alignmnet of raising mains

Supply and laying of 3-1/2 x 240 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clamping of 3-1/2 x 240 PVC LTUG armoured cable on post or on wall with MS clamps

Supply and providing cable end termination of 3-1/2 x240 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and fixing of brass cable gland for 3-1/2 x 240 sq.mm. PVC armoured LTUG cable with earth connection

Supply and laying of 3-1/2 x 400 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clamping of 3-1/2 x 400 sq.mm. PVC LTUG armoured LTUG cable on post or on wall with MS Clamps

Supply and providing cable end termination of 3-1/2 x400 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and fixing of brass cable gland for 3-1/2 x 400 sq.mm. PVC armoured LTUG cable with earth connection

Supply and clamping of 3-1/2 x 25 PVC LTUG armoured cable on post or on wall with MS clamps

Supply and providing cable end termination of 3-1/2 x25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection

Supply and clamping of 3-1/2 x 50 PVC LTUG armoured cable on post or on wall with MS clamps

Supply and providing cable end termination of 3-1/2 x50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and fixing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection

Supply and clamping of 3-1/2 x 95 PVC LTUG armoured cable on post or on wall with MS clamps

Supply and providing cable end termination of 3-1/2 x95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection

Supply and clamping of 3-1/2 x 120 PVC LTUG armoured cable on post or on wall with MS clamps

Supply and providing cable end termination of 3-1/2 x120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and run of 25mm x 3mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection

Design, Engineering Supply, erection, testing, Commissioning And handing over of 1 No. 26 Persons Bed-Cum-Passenger lift as per following Technical Specification. 1. Type of Lift : Passenger cum Bed lift. 2. Capacity of Lift : 26 Persons / 1768 Kg. 3. Speed : 1.0 Metre/Sec. 4. Type of Drive : Specific Variable voltage Variable Frequency V3F drive with enhanced ride comfort and leveling functions. 5. No. of Floors : Ground + 6 Floors. 6. Total Travel : 26.00 Metres. 7. Levelling Accuracy : High Level Accuracy with smooth & Jerk free stopping. 8. Construction of Car : High quality and suitable thickness S.S. Car and M.S. False ceiling. 9. Position of Machine : Directly above the lift shaft. 10. No. of Landing Entrance : One in front Total 6Nos. 11. No. of Car Entrance : One in front only. 12. Car Entrance Door : Power operated V3F driver Side opening sliding S.S. doors with VF operation. 13. Landing Entrance Door : Power operated V3F driver Side opening S.S. Doors with provision emergency key opening at all Landings. 14. Lift well existing : 2350 mm(Breadth) x 3000 mm(Length). 15. Lift pit depth required : 1600mm. 16. Car Size : 2100mm (Length) x 1800mm(Breadth) 17. Car Clear opening : 1200mm wide x 2000mm. 18. Power Supply : 400/440V 3 Phase, 50 Cycles/ sec AC supply for power and 230 V 50 Hz single phase AC supply for light. At machine room with proper two distinct earth flat of adequate size from ISI earthing at ground floor. (as per IS 14665)(part 5)

19. Lift machine room : WITHOUT Machine room (as per IS 14665)(part 5)20. Control: Micro Computer (micro processor) based simplex, collective control with or without Attendent. 21. Control: Micro processor computer based - simplex collective ful collective logic system with mode. 22. Car fittings : Led lighting with 1No. 300mm sweep cabin fan. 23. Lift well : RCC Construction with brick masonry. 24. Indication : Up / Down Digital direction and position indicator for all landing and inside the Car. 25. Emergency Alarm Bell : Battery operated alarm bell with automatic changing device. 26. Emergency light : Battery operated light with automatic charging device. 27. Fireman's Switch : Include at Ground Floor. 28. Minor Building work : To be provided by the lift contract. 29. Scaffolding : To be provided by the lift contract. 30. M.S.Sill angles and facia plates: To be provided by the lift contract. 31. Steel for lift machinery : To be provided by the lift contract. 32. Servicing and maintenance : Free comprehensive Servicing and maintenance during the guarantee period of one year. 33. Automatic Rescue Device : To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consist of suitable type of battery system with charger, invertor, under voltage protection system etc, complete with all accessories. 34. Provision of intercom with phone : To be provided by the lift contract.

35. Lift Licence : Preparation of drawing, payment of charges to CEIG / Lift inspectorate and insurance policies if any and obtaining CEIG safety certificate as per lift act. 36. Floor announciator with music Included. 37. Special Feature:(a). Infra red colour sensor with height screen. (b). Stainless steel signal fixtures. (c). Vandal proof button with S.S. cover. (d). S.S door frames for landing doors. (e). VF Door operator. (f). Call register signal. (g). Stainless steel facia plate for car operating panel and landing fixtures. (h). ON- OFF Switch for fan and light. (i). Voice Announciator. (j). Full with half height real panel minor. (k). Voltage stabilizer for circuit control. (l). Tubular stainless steel hand rail in car. (m). Pit ladder. (n). Braille buttons. (o). Anti skid single piece pvc floor in 2mm thick (p). Over load warning Indicator (q). Lift operating key fixing at Ground Floor. (r). Lift Car Control operating key fixing at Ground Floor. 38. Lift Duty motor of adequate capacity, reduction worm gear, electro magnetic brake with compression springs, over speed governor, phase failure and phase reversal relay, alarm bell, T guide brackets for car and counter weight, rubber padding under winding unit, car safety gears, buffer electro mechanical door locks, emergency key, side supporting angles motor over load protection devices. Final limit switch, main suspension ropes, counter weights, lifting joist for mounting the machineries. 39. Site testing in accordance with IS 14665 should be carried out at the time of handing over. -

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )

Supply and fixing of 20W, 4 feet LED fitting on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting

Supply and fixing of 1200mm (48”) Sweep AC ceiling fan (Crompton High speed) complete with stepped electronic 300W regulator with 0.3 mtr down rod on the existing clamp

Supply and fixing of 300mm (12”) sweep (light duty) AC Exhaust fan without provision of hole in the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Supply and fixing of WT bulk head fitting with guard suitable for LED with 7W bulb.

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 1no.6A two module socket , 1 no. 6/16A two module socket, 1 no. 6A one module switch, 1 no.16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections.

Supply and fixing of 32A DP MCB in sheet steel enclosure with wall with earth connection (For AC Plug)

Supply and fixing of 100A FP MCB in sheet steel enclosure with wall with earth connection (For AC Plug)

Supply and fixing of 63 A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A TP MCB switch as incoming and 9 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. (The DB and MCBs are of Hager make)

Supply and fixing of 8 way vertical TPN DB with acrylic door cover of IP 43 protection in sheet steel enclosure with 1 no. 63 A 4P MCB Isolator as incoming and 24 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.(The DB and MCBs are of Hager make)

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 4 of 16 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supply and clamping of 3-1/2 x 50 PVC LTUG armoured cable on post or on wall with MS clamps

Supply and providing cable end termination of 3-1/2 x50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and fixing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply,erection,testing and commissioning of 5.5TR capacity ceiling suspended ductable package air conditioning unit of high tech,low noise level indoor unit of double skin AHU with fin and tube type cooling coil,PUF insulateddetachable type drier provided in refrigerant circuit to reduce moisture content,multi stage type distributor for feeding equal quantity of the refrigerant mixture to all the sections of the coil with required valves,directly coupled blower to reduce troubles and wear and tear compared to belt driven blower.It also possessed with thermostatic expansion valve ,lift and pull type aluminium framed durable washable air filter.It consists of integrated electrical panel with complete micro processor control with display for easy operation and maintenance of unit common operating conditions of 45 deg.F suction temperature Type ceiling mounted Blower 1 no. Motor 1 no Motor power 570W/single phase Weight 80Kg Air flow 2400cfm

B) 5.5TR capacity floor mounting ductable Air conditioning high tech outdoor unit with power saving high efficiency sturdy and rugged 1 number scroll compressor with inbuilt internal thermal protector ,internal pressurerelief valve,auto reset type HP/LP safety cutout to improve reliability of compressor and condensor shell be made of super slit high efficient aluminium ins mechanically bonded to copper tubes condenser L type coil to be rigidly fixed to unit frame with fasteners imported condenser fan and fan blades to be statically and dynamically balanced to reduce noise and vibration.The fans are direct driven by 3 phase motor with single phase preventor protection Condensing temperature 130’F for the system operation Mounting Rubber sleeve and nut on floor Refrigerant R410 Speed 2900 Weight 90Kg Capacity 5.5TR Consumption 6.6 KW/ea Type Air cooled finned tube Face area 13.3sq.ft Tube dia. 3/8” Tube thick Aluminium Fin density 14Fpi No.of fan 1 no RPM 900 Watts 149/ea Make:Carrier/Voltas/Bluestar/equ.)

Supply and laying of 7/8” hard drawn copper pipe interconnecting indoor unit and condensing unit with necessary fittings,supports etc.,

Supply and laying of 5/8” hard drawn copper pipe interconnecting indoor unit and condensing unit with necessary fittings,supports etc.

Supply and providing pipeline nitrile rubber insulation for suction line refrigerant pipe and drain pipe

Supply and making of factory fabricated flat rectangular ducting made up of GI sheets of 24 gauge with MS angle supports angle on bottom with threaded rods suspended from ceiling

Supply and laying of 4core 6 sq.mm copper flexible single core cable for indoor to outdoor unit motor.

Supply and laying of single core cable for indoor and outdoor unit sensor control with 0.5 sq.mm 6 core flexible cable

Supply, erection, testing commissioning and handing over of 11 TR nominal capacity Ceiling suspended packaged Split type AC plant with the following components A) 11.0 TR capacity ceiling suspended Duct able Air Conditioner high tech low height low noise level indoor unit with fin and tube type cooling coil Detachable type drier provided in refrigerant circuit to reduce moisture content multi stage type distributor for feeding equal quantities of the refrigerant mixture to all the section of the coil with required valves directly coupled blower to reduce troubles and wear and tear compared to belt drive blower. Thermostatic expansion valve lift and pull type aluminum framed durable washable air filter. Integrated electrical panel with complete microprocessor control with display for easy operation and maintenance of unit common operating conditioners of 45deg.F suction temperature.

B) 5.5TR-2 Nos capacity floor and wall mountable air conditioner high tech outdoor unit with power saving high efficiency sturdy and rugged each 1 No of digital scroll compressor each with inbuilt internal thermal protector, internal pressure relief valve, Auto reset type HP/LP safety cut off to improve reliability of compressor and condenser shall be made of super slit high efficient aluminum fins mechanically boned to copper tubes condenser ‘L’ type coil to be rigidly fixed to unit frame with fasteners, Imported condenser fan & fan blades to be statically and, dynamically balanced to reduce noise and vibration. The fans are direct driven 3 phase motor with protection. Condensing temperature 145deg.Ffor the system operations etc., Mounting - Rubber sleeve and nuts with Proper fabricated Angle iron Stand. Refrigerant - R-410 Speed - 3600 RPM Capacity - 11.0TR Consumption - 13.2kwh/Each Tube type - Grooved copper. Fin density - 18FPI No of fans - 2nos Fan RPM - 1200 Suitable for operate on-380V- 415V-3Ph–50 Hz, AC

Supply and laying of 13/8Hard drawn copper refrigerant pipe with Nit rile rubber hose insulation and etc.,

Supply and laying of 7/8 Hard drawn copper refrigerant pipe with Nit rile rubber hose insulation and etc.,

Fabrication ,Supply and fixing of suitable MS Angle Iron frame for mounting the indoor unit with base support with anti vibration mounting rubber pads protection.( including bolt & nut Support and proper clamping with iron rods and etc.,)

Fabrication, supply and fixing of suitable MS - L -Angle Iron frame ( 3.5” X 2.5” X 5mm thick- frame size 7’ x 5’ – platform 5’ x 3.5’) for mounting the outdoor unit on the wall as per site requirements with base and access sitting platform support with proper red oxide & black painted frame with anti vibration mounting rubber pads protection (including making 4nos of hole/unit ( 6” x 6” x 10” depth) on the wall to fix the stand. and cement, sand, 3/4’’ blue metal & masonry and transportation work etc; ) suitable for 5.5TR outdoor unit.

Towards charges for welding, leak testing, pressure testing , pressure holding , vaccummising, dehydration and other related work etc;

Supply and running of 1’’-UPVC water drain line with L-bow, U-bends, pasting and clamping with proper support & nit rile hose insulation etc;

Supply and filling of R-410 Refrigerant gas.

Supply, fabrication and erection of fabricated ducting made up of GI sheets of 20 gauge thickness complete with MS angle supports angle flanges, anchor fastness, tees, and bends, wherever necessary etc as required.

Supply, fabrication and erection of fabricated ducting made up of GI sheets of 22 gauge thickness complete with MS angle supports angle flanges, anchor fastness, tees, and bends, wherever necessary etc as required.

Supply and providing of 19mm thick double layered aluminum foiled nit rile rubber Acoustic insulation to entire outer area of the duct with proper ten rite adhesive past and 3”aluminium tape for duct joints and etc.,

Supply and providing of 13mm thick nitrile rubber thermal Insulation to entire inside area of the duct with proper ten rite adhesive past to reduce noise and avoid the vibration and etc.,

Supply, fabrication and fixing of back drop volume control adjustable damper between indoor unit and duct for supply air with one coat of red oxide.

Supply and fixing of extruded aluminum powder coated supply air grilles / diffusers with volume control adjustable dampers.

Supply and fixing of flexible canvas connection between AHU unit and ducting for 5.5TR, indoor unit and ducting and rubber pads with ceiling suspended support angles and Aluminum canvas etc., for 11.0TR.

Supply and laying of 6 Core 2.5Sqmm control cable for indoor to outdoor control wiring system.

Supply and laying of 4core 10.0 sq.mm power cable for connecting the main power supply from Main power control board to outdoor unit and control wiring systems.

Supply and installation of 2.0 TR (6000K Cal/hr) capacity 3 star rated energy efficient Hi-wall mounting split type Air-conditioning unit consisting of outdoor condensing unit complete with hermatically sealed Air compressor with R32/R 410A refrigerant air cooled condenser ,fan etc., and 1 number indoor unit comprising evaporator unit with cooling coil,blower motor and connected accessories,control etc., with 3 mtr copper refrigerant piping and cord wire connecting indoor and outdoor unit with drain pipe suitable for operation on 230V +/- 10% 50 Hz single phase A.C supply adhering following norms a) Nominal Cooling capacity -23300BTU/Hr b) Air flow rate - 635 CFM C) Noise level - 48/40/32 db (Make:Carrier /Voltas/Blue star )

Supply and laying of 5/8” and 3/8” copper pipe, cordwire, PVC drain pipe with nitrile rubber insulation etc., (beyond 3 mt length)

Supply and fixing of MS stand for fixing outdoor unit nuts.

Supply and installation of 5KVA capacity Automatic Voltage stabilizer with time delay relay

Dismantling and renewal by supply & fixing of 26 Persons Bed-Cum-Passenger lift as per following Technical Specification. 1. Type of Lift : Passenger cum Bed lift. 2. Capacity of Lift : 26 Persons / 1768 Kg. 3. Speed : 1.0 Metre/Sec. 4. Type of Drive : Specific Variable voltage Variable Frequency V3F drive with enhanced ride comfort and leveling functions. 5. No. of Floors : Ground + 6 Floors. 6. Total Travel : 26.00 Metres. 7. Levelling Accuracy : High Level Accuracy with smooth & Jerk free stopping. 8. Construction of Car : High quality and suitable thickness S.S. Car and M.S. False ceiling. 9. Position of Machine : Directly above the lift shaft. 10. No. of Landing Entrance : One in front Total 6Nos. 11. No. of Car Entrance : One in front only. 12. Car Entrance Door : Power operated V3F driver Side opening sliding S.S. doors with VF operation. 13. Landing Entrance Door : Power operated V3F driver Side opening S.S. Doors with provision emergency key opening at all Landings. 14. Lift well existing : 2350 mm(Breadth) x 3000 mm(Length). 15. Lift pit depth required : 1600mm.

16. Car Size : 2100mm (Length) x 1800mm(Breadth) 17. Car Clear opening : 1200mm wide x 2000mm. 18. Power Supply : 400/440V 3 Phase, 50 Cycles/ sec AC supply for power and 230 V 50 Hz single phase AC supply for light. At machine room with proper two distinct earth flat of adequate size from ISI earthing at ground floor. (as per IS 14665)(part 5) 19. Lift machine room : WITHOUT Machine room (as per IS 14665)(part 5) 20. Control: Micro Computer (micro processor) based simplex, collective control with or without Attendent. 21. Control: Micro processor computer based - simplex collective ful collective logic system with mode. 22. Car fittings : Led lighting with 1No. 300mm sweep cabin fan. 23. Lift well : RCC Construction with brick masonry. 24. Indication : Up / Down Digital direction and position indicator for all landing and inside the Car. 25. Emergency Alarm Bell : Battery operated alarm bell with automatic changing device. 26. Emergency light : Battery operated light with automatic charging device. 27. Fireman's Switch : Include at Ground Floor.

28. Minor Building work : To be provided by the lift contract. 29. Scaffolding : To be provided by the lift contract. 30. M.S.Sill angles and facia plates: To be provided by the lift contract. 31. Steel for lift machinery : To be provided by the lift contract. 32. Servicing and maintenance : Free comprehensive Servicing and maintenance during the guarantee period of one year. 33. Automatic Rescue Device : To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consist of suitable type of battery system with charger, invertor, under voltage protection system etc, complete with all accessories. 34. Provision of intercom with phone : To be provided by the lift contract. 35. Lift Licence : Preparation of drawing, payment of charges to CEIG / Lift inspectorate and insurance policies if any and obtaining CEIG safety certificate as per lift act.

36. Floor announciator with music Included. 37. Special Feature: (a). Infra red colour sensor with height screen. (b). Stainless steel signal fixtures. (c). Vandal proof button with S.S. cover. (d). S.S door frames for landing doors. (e). VF Door operator. (f). Call register signal. (g). Stainless steel facia plate for car operating panel and landing fixtures. (h). ON- OFF Switch for fan and light. (i). Voice Announciator. (j). Full with half height real panel minor. (k). Voltage stabilizer for circuit control. (l). Tubular stainless steel hand rail in car. (m). Pit ladder. (n). Braille buttons. (o). Anti skid single piece pvc floor in 2mm thick (p). Over load warning Indicator (q). Lift operating key fixing at Ground Floor. (r). Lift Car Control operating key fixing at Ground Floor. 38. Lift Duty motor of adequate capacity, reduction worm gear, electro magnetic brake with compression springs, over speed governor, phase failure and phase reversal relay, alarm bell, T guide brackets for car and counter weight, rubber padding under winding unit, car safety gears, buffer electro mechanical door locks, emergency key, side supporting angles motor over load protection devices. Final limit switch, main suspension ropes, counter weights, lifting joist for mounting the machineries. 39. Site testing in accordance with IS 14665 should be carried out at the time of handing over. -

GST at 18%

KSR ASSOCIATES

G V CONSTRUCTIONS