84160/E8 SPECIAL REPAIRS TO CERTAIN MARRIED ACCOMODATION AT AF STN JORHAT UNDER GE (AF) JORHAT

Amount

B/R SERVICES / WORKS :-

Taking down chowkats with shutters (without taking down of shutter from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each. complete all as specified and as directed.

Taking down chowkats with shutters (without taking down of shutter from the frames) area not exc. 1.50 Sqm each. complete all as specified and as directed.

S&F solid PVC door frames of size 50mm x 47mm made out of 5mm plain cover fillet colour PVC sheet reinforced with MS square tube for toilet complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either toside and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in M.S frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement. Supplying and fixing in the frame at site as specified of drawing.

S &F Pressed steel frame for doors of size 125x 60mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and directed.

S&F pressed steel frame of size 105x60mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and directed

S &F Pressed steel frame for doors of size 75x 50mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs , hinges, lock strike plate etc. complete all as specified and directed.

S&F 35mm thick skeliton / glazed shutter factory made open rebated and prepared to receive glass gauged etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood plain framed pannelled shutter (two panel) with lock rail and panel of 12mm veneered board particle board of exterior grade with commercial veneering on both faces. The size of rail and style as per IS-1003 complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L applying Two Coats of Synthetic Enamel Paint (1st grade quality Paint of as approved Tint) over a Coat of Pink Primer after preparing New Wooden Surfaces of any description, over 10 Cm in Width or Girth complete all as specified and as directed.

S&F 100 mm long butt hinges with stainless steel hinges type B-21 complete all as specfied and as directed.

S&F 200 mm aluminum , anodised, barrel tower bolts of extruded section complete all as specfied and as directed.

S&F 150 mm aluminum Handle Cast type anodised complete all as specfied and as directed.

S&F 250mm aluminum alloy, anodised, sliding door bolt with hasp and staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specfied and as directed.

S&F for flat iron size 25mmx6mm as in hold fast including tarring or coal tar black paint conforming to Fe 410-0 or Fe 310-0 complete all as specfied and as directed.

S&F 2nd class hardwood small fittins such as brackets of any type, latch and hinge blocks, shapes door and window stops and the like including all necessary labours ; articles n exc 200 Cucm each complete all as specfied and as directed.

S&F 100mm long hasp and staple, aluminum anodised including bolt to hinge plate and fixed with screws complete all as specfied and as directed.

S&F Aluminium Powder Coated of any Colour (Thickness of Powder coating 50 micron minimum) Window, Sliding type, 3-Track with Frame Size 100x35x1.2mm and shutter 40 x 18 x 0.9 mm with Two Glass Shutters with Plain Float Glass of 4.0mm thick and One Gauge Shutter provided with Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average Width of Aperture 1.40mm including necessary Joining Cleats, Glazing Clips, EPDM Rubber/ Neoprene Gasket Packing and Anodised Aluminium Fittings viz Locking arrangements, etc. all as per requirment at Site of Work, complete all as specified and as directed. NOTE :- Cost of Glass, Wire Clothes, Aluminium Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Anodised Aluminium Fittings, Screws, etc. all as per requirment at site of work will deem to be included in the Quoted Unit Rate.

S&F Aluminium Powder Coated of any Colour (Thickness of Powder coating 50 micron minimum) Window, Sliding type, 2-Track with Frame Section 50.3x26x1.2mm and 3 No shutters section 40 x 18 x 0.90 mm with One Glass Shutter with Plain Float Glass of 4.0mm thick and One Gauge Shutter provided with Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average Width of Aperture 1.40mm including necessary Joining Cleats, Glazing Clips, EPDM Rubber/ Neoprene Gasket Packing and Anodised Aluminium Fittings viz Locking arrangements, etc. all as per requirment at Site of Work, complete all as specified and as directed. NOTE : Cost of Glass, Wire Clothes, Aluminium Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Anodised Aluminium Fittings, Screws, etc. all as per requirment at Site of Work will deem to be included in the Quoted Unit Rate.

S&F Aluminium Louvered Ventilators of frame Section 50.3 x 26 x 1.2 mm and 1 No shutter section 40 x 18 x 0.9 mm, Half Portion Adjustable type Louvers including Frosted Glass 3.0mm thick and another Half Portion provided with Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average Width of Aperture 1.40mm, Fixed type on Outside Frame including necessary Joining Cleats, Glazing Clips, EPDM Rubber/ Neoprene Gasket Packing and Anodised Aluminium Fittings viz Locking arrangements, etc. all as per requirment at Site of Work, complete all as specified and as directed. NOTE : Cost of Glass, Wire Clothes, Aluminium Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Anodised Aluminium Fittings, Screws, etc. all as per requirment at Site of Work will deem to be included in the Quoted Unit Rate.

S&F Anodised Aluminium Deco Grill (Anodised Transparent or Dyed to required Shade according to IS: 1868 with minimum Anodic Coating of Grade AC 15) of Approved Design/ Pattern, with Approved Standard Section and fixed to the existing Window Frame with C.P. Brass/ Stainless Steel Screws @ 200mm Centre to Centre, including Cutting the Grill to proper Opening Size for Fixing and Operation of Handles and fixing Approved Anodised Aluminium Standard Section around the Opening, complete all as per requirement at Site of Work, complete all as specified and as directed.

M&L applying Two Coats of Synthetic Enamel Paint (1st grade quality Paint of as approved Tint) over a Coat of Red oxide zinc chrome Primer after preparing New steel Surfaces of any description, over 10 Cm in width or girth complete all as specified and as directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required , depth of embedded portion of holdfast exc half bricks and not exc one brick complete all as specified and as directed.

Dismantling Boarding of any description fixed in any position with screws or nails complete all as specified and as directed.

S&F 19 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F 20mm thick 2nd class hard wood clean swan planed both sides boarding fixed in Fixed in shelves; Par titions and shelves of built-in cupboards,almirahs, book cases,toilet boxes, racks,pelmets and similar work complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and removing rubbish off the premises complete all as specified and as directed.

M&L non-skid Ceramic(1st grade quality) Tiles 7 to 8mm thick (Rectangular or Square), Area of Each Tile exc. 0.18 Sqm but not exceeding 0.38sqm as in Floors, Set and Jointed in Neat Cement Slurry and Pointed in white or Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deem to be included in the Quoted Unit Rate.

M&L non-skid Ceramic(1st grade quality) Tiles 7 to 8mm thick(Rectangular or Square), Area of Each Tile exc. 0.18 Sqm but not exceeding 0.38sqm as in vertical surfaces such as skirting etc, Set and Jointed in neat Cement Slurry and Pointed in white or Coloured Cement to match the Tile, fixed over and including backing coat of 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of backing coat will deem to be included in the Quoted Unit Rate.

M&L non-skid Ceramic(1st grade quality) Tiles 7 to 8mm thick (Rectangular or Square), Area of Each Tile exc. 0.06 Sqm but not exceeding 0.11sqm as in Floors, Set and Jointed in Neat Cement Slurry and Pointed in white or Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deem to be included in the Quoted Unit Rate.

M&L 25mm thick Plain Cement Concrete 1:2:4, type B-1(using 20mm graded stone aggregate) as in sub base complete all as specified and as directed.

S&F for glazed ceramic coloured wall tiles 300mm x 200mm x 7mm / 450mm X300mm X7mm thick economy class grade B-II(a) set and jointed neat cement slurry and pointed in colour cement to match as in dado over 10 mm thick screed in cement mortar 1:4 complete all as specified and as directed. NOTE :- Cost of backing coat will deem to be included in the Quoted Unit Rate.

Demolition stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite placed over 15mm thick screed / Cement mortar bedding with cement mortar (1:6) complete all as specified and as directed.

S&F in rapair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair plate rack made of stainless steel 1mm thick sheet including fixing overall size 915mm x 915mm x 255 mm Make: Nirali / Silver shine or equivalent complete all as specified and as directed.

Demolition of Reinfoced cement concrete for roofs, floors,(other than ground floors) beams, stair cases, landing, chajjaa and similar suspended work complete all as specified and as directed.

M&L for Reinforced Cement Concrete 1:2:4, type B1(using 20mm graded stone aggregate ) as in Slabs supported on walls, beams and columns in floors , roofs., landings, balconies , canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L Formwork to the soffits of suspended slabs such as roof slabs , floor slabs , landings and similar work ; not exceeding 200 mm thick (Horizontal or sloping ) and making flat rough finished surfaces of concrete complete all as specified and as directed.

M&L for TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking , bending spirally for hooping ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for TMT bars 5 mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and as directed.

Roughening of old concrete surfaces / floor by picking, sweeping clean and washing down with water to remove dust and applying Brushing neat cement slurry @ 3.0kg of cement per sq.metre including taking down existing roof treatment, of any description and removing debris upto a distance not exceeding 50 mtr complete all as specified and directed.

M&L 25mm (ave.) thick Plain Cement Concrete, 1:2:4, type B-0 (using 12.5mm graded stone aggregate) laid in Slope 1:40 at Top of RCC Roof Slabs/ Surfaces or Roof Kerbs including Mixing with Integral Water Proofing Compound as recommended by Manufacturer or @ 2% by weight of cement , complete all as specified and as directed. NOTE : WPC will be Measured and Paid separately under relevant item here-in-after.

M&L 10 mm thick Rendering in Cement Mortar 1:4 on Concrete Padding on RCC Roof Slabs, when the Concrete is Green, finished Plastered Surfaces Fair and Even, complete all as specified and as directed.

M & L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed.

M&L APP based Polymeric Membrane Minimum weighing 3.00 Kg Per Sqm and Minimum 3.0mm thick, Reinforced with Polyester Non-woven Fabric (Weight not less than 150 Grams Per Sqm), laid on Primed Surface with Side Overlap of 80mm and End Overlap of 100mm using Bitumen Torch or by LP Gas Torching and Sealing all Joints, etc. and ensuring complete Thermo Fusing and Applying One coat of Aluminium Paint over it, complete all as specified and as directed.

S&F 500 Ltrs capacity rotational moulded polythelene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position after taking down the old water storage tank of capacity Exc. 250 litres but n exc 500 litre complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F 0.63 mm thick Plain, galvanised mild steel sheeting, in ridges,hips, valley gutters, drip , eaves board and straight flashings (length and girth as fixed) with grade of zinc coating 275gms per sqm fixed with "L" type or "J" type or cranked hook bolts complete all as specified and as directed.

Dismantling of old Mild steel Work of any description and in any position complete all as specified and as directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, osing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; etc .posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including dismantling the old steel work complete all as specified and as directed.

M&L Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-290 (Gde E 165) complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (100mm dia) (any pattern), including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F PVC (SWR) Floor Trap 75mm bore (dia) with Chromium Plated Grating, Plain including Jointing to Waste Pipe with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, fixing to Walls or laid on Floors, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Bends (any Radius) and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) PVC (SWR) Junction, Single (Single T), Equal or Unequal and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, Laid in Trenches, complete all as specified and as directed. NOTE : Nessary Earth Works will be Measured and Paid for separately under appropriate Items in this schedule.

S&F PVC (SWR) 110mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, fixing to Walls or laid on Floors, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Bends (any Radius) and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) PVC (SWR) Junction, Single (Single T), Equal or Unequal and Jointing with Solvent Cement, complete all as specified and as directed.

110 mm PVC (SWR) vent cowl complete all as specified and as directed.

M & L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Fittings/ Connections of any description from any Situations, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Fittings/ Connections of any description from any Situations, complete all as specified and as directed.

S&F 15mm bore (dia) Galvanised Steel Tubing "medium grade", conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

Refix of 15mm dia old Galvanised Steel Tubing with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.NOTE : old GI pipe obtained from sl. Item No. 1.067 above shall be reused under this item.

S&F 20mm bore (dia) Galvanised Steel Tubing "medium grade", conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

Refix of 20mm dia old Galvanised Steel Tubing with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.NOTE : old GI pipe obtained from sl. Item No. 1.068 above shall be reused under this item

M&L Cutting Chases, Pinning in, Making Good to Facings where required and Pointing in Cement Mortar 1:3 to Ends or Edges of Cills, Shelves, Lintels, etc., and Cutting Chases for Concealed Water Tubing and Making Good, Cutting Girth not exc. 10 Cm and not exc. 5.0 Cm in Depth, complete all as specified and as directed.

S&F in repair Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed.

S&F in repair Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Screwed down, High Pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed.

S&F in repair angle cock/ stop valve e 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Screwed down, High Pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed.

S&F in repair Chromium Plated Shower Rose 125mm Size with Shower Arm, Swivel Joint including fixing to Steel/ CPVC Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type, ISI Marked with Inlet, Ball Valve, Float and Handle, a Pair of Cast Iron Brackets Erecting Stand duly Painted, including PVC Flush Pipe 32mm or 40mm bore (dia) of Low or High density with PVC Long Bend, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F for vitreous china squatting pan 'Orissa' pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including trap set and concrete including connection to trap , and to flushing pipe, anti-syphonage pipe etccomplete including making good to floors with PCC bedding (1:5:10) type E2 using 40mm nominal brick ballast and connection to trap with cement mortar all as specified, and making good to floor including demilition of PCC / Lime concrete bedding existing pan complete.complete all as specified and as directed.

S & F in repairs vitreous china wash down water closet pan (Padestal pattern) white, (excluding fixing bolts flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair 32mm bore PVC waste pipe with fittings etc complete all as specified and as directed.

S&F in repair 15mm size PVC connections pipe with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repair 32 mm dia Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) for sink complete all as specified and as directed.

S&F in Repair brass chromium plated Towel Rail 20 mm dia 'D' type 600mm long Between flanges complete all as specified and as directed.

S&F 20 mm Ball valves high pressure of PTMT with epoxy coat ed Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and as directed.

S&F Stainless Steel Soap Dish, not less than 150mm in Size (as approved), fixing to Walls with and including Chromium plated Brass Screws and Wooden/ Plastic Cleats and Fixing-in-repairs, complete all as specified and as directed.

S&F in repairs vitreous china wash hand basin flat back size 580 x 450 mm including CP waste coupling fixed with 2 No cadmium plated rag bolts 10mm dia. complete all as specified and as directed.

S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair for 20mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair for 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair bathroom cabinet mirror 35cmx45cm complete all as specified and as directed.

Demolition Brick Masonry Work, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc. and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

M&L Brick Work in Half-brick thick Walls with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan to any Radius, Built in Cement Mortar 1:4, complete all as specified and as directed.

M&L Brick Work in One or More Brick thick Walls with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, Built in Cement Mortar 1:6, complete all as specified and as directed.

Taking down Cement Plaster including Raking out Joints, hacking for Key, scrubbing down with Water and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

M&L for 15mm thick rendering on fair face of brick works or concrete surfaces of walls with cement mortar (1:4) finishing even & smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering on fair face of brick works or concrete surfaces of walls with cement mortar (1:6) finishing even & smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar (1:3) on ceiling finished fair and even (with out using extra cement) complete all as specified and directed.

M&L for preparation of new surfaces and apply 1.5mm in (average) in two coats wall care putty of Truecare Wall Putty from Asian Paints or equivalent from Berger Paints / Nerolac Paints on plastered surface of walls complete all as specified and directed. (b) M & L for one coat of Truecare Exterior Wall Primer of Asian Paints or equivalent from Berger Paints/Nerolac Paints finishing the exterior rough plasters surface a smooth finish complete all as specified and directed. (c) M & L for two coats of exterior emulsion paint of Apex Weather proof paint from Asian Paints or equivalent from Berger Paints/Nerolac Paints by use of mechanical equipments/applicators as per manufactures instructions complete all as specified and directed..

M&L for applying two coat of oil bound distemper over a coat of primer over 1.5mm thick (average) wall care putty on plastered surface after preparation new wall surfaces complete all as specified and directed.

M&L for applying two coat of oil bound distemper over a coat of primer over 1.5mm thick (average) wall care putty on plastered surface after complete removal of existing treatment of wall surfaces complete all as specified and directed.

M&L for applying two coat of oil bound distemper over a coat of primer over 1.5mm thick (average) wall care putty after preparation of new ceiling surfaces complete all as specified and directed.

M&L for applying two coat of oil bound distemper over a coat of primer over 1.5mm thick (average) wall care putty on plastered surface after preparation and complete removal of existing tratment as in Ceiling surfaces complete all as specified and directed.

M&L for 50mm thick plain cement concrete (1:3:6) , type C2 (using 40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even & smooth without using extra cement complete all as specified and as directed.

S&F in repair 20 mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

S&F in repair 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for Second Class Hard wood in Scantling, Clean sawn, fixed as in Unframed Work with Nails in any position after dismantling of timber scantling, 40sqcm and over in section, in any position, in unframed work, complete all as specified and as directed.

Dismantling wall and ceiling boards ( fibre, pulp, insulation etc. ) or insulation boards/ slabs/ blankets , any thickness , including cover fillets complete all as specified and as directed.

M&L GI frame work for seamless ceiling comprising of GI Perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx. 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flanges of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the itermediate channel at 457mm centre complete all as specified and as directed.

M&L 6mm thick perforated particle board/tiles for insulation and accoustic purposes, 600mm X 600mm size fixed with screw to frame work or with staples on snap grid complete all as specified and directed.

Supply only Integral Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and directed.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L Plain Cement Concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in drain, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

M&L for precast cement concrete(1:2:4), type B1(using 20mm graded stone aggregate) as in cover slabs for man hole/kitchen platforms etc with plain set in CM (1:6) of concrete etc, complete all as specified and as directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) used in foundations, filling and mass concrete complete all as specified and directed.

M & L for 75mm thick Plain Cement Concrete 1:2:4, type B-2 (using 40mm graded stone aggregate) as in flooring complete all as specified and directed.

M&L for 25mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 60mm thickness machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006, M-35 Grade complete all as specified and as directed.

S&F PVC shelf wall corner size 230mm with all fittings / brackets complete all as specified and as directed.

M&L Grating round 140mm dia of PTMT (Minium weight 50 gms) complete all as specified and as directed.

S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S&F in repair 50 mm dia high density polyethylene pipes (HDPE) of ressure rating 6 kgf/sqcm fixed to walls, ceilings or in floors etc. complete in all respect as specified and directed.

M&L One Coat of Synthetic enamel paint (1st grade quality) of approved Tint after preparation of old Painted Steel and Iron Surfaces of any descriptions, exc. 10 Cm in Width or Girth complete all as specified and as directed.

M&L Preparing Old Painted Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st grade quality Paint of as approved Tint) complete all as specified and as directed.

M&L Complete Removal of existing Surface Treatment on Walls and Applying Two or More Coats of 100% Premium Acrylic Emulsion Paint having VOC less than 50 Gram Per Litre and UV Resistance as per IS 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint of required Shade (Company Depot Tinted) with Silicon Additives @ 1.43 Litre Per 10 Sqm over and including Priming coat of Exterior Primer applied @ 0.90 Litre Per 10 Sqm, complete all as specified and as directed.

E/M SERVICES/ WORKS :-

M&L Taking down carefully Unserviceable Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) complete from in any Situations including Fixtures and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets, Light Fittings of any description, etc, Making Good Disturbed Surfaces of Walls/ Ceilings, etc. in Cement Mortar 1:3 and Applying Surface Treatment (White/Colour Washing/ Distempering/ Painting) wherever required to match the Existing Finishes, complete all as specified and as directed.

Taking down MCB DB/ Main Switch with MCB of any description including Making Good Disturbed Surfaces of Walls/ Ceilings, etc. with Cement Mortar 1:3 and Applying Surface Treatment (White/Colour Washing/ Distempering/ Painting) wherever required to match the Existing Finishes, complete all as specified and as directed

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in PVC casing capping of suitable Size (20mm wide) alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. complete including PVC board for mounting Switches, Sockets, etc., Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed. NOTE : Cost of PVC casing capping with all Fitting/ Fixtures, etc. as required at Site of Work will deem to be included in the Quoted Unit Rate.

Ditto- all as per item No.2.003 here-in-before but one ceiling or exhaust fan point controlled by one 1-way switch complete all as specified and as directed.

Ditto- all as per item No.2.003 here-in-before but for 5Amp socket point on indepdent board complete all as specified and as directed.

Ditto- all as per item No.2.003 here-in-before but for 5Amp socket point on same board controlled by another switch complete all as specified and as directed.

Ditto- all as per item No.2.003 here-in-before but for one bell point controlled by one bell push complete all as specified and as directed.

Do- all as per Ser item No. 2.003 above but One light point controlled by two 2-way switches, with cables 1.5 sq. mm size complete all as specified and as directed.

Ditto- all as per item No.2.003 here-in-before but with 2.5sqmm cable for 15Amps socket outlet on independent board with 2.5sqmm earth continuty wire complete all as specified and as directed.

S&F Ceiling Rose Surface type, Bakelite, 3 Terminal suitable for 230 Volt and Electrically Connecting up, complete all as specified and as directed.

S&F Switch Piano 6 Amp, Single Pole, 1-way, Flush type, 230 Volt and Electrically Connecting up, complete all as specified and as directed.

S&F Socket Out-let 6 Amp, 3 Pin, Flush type, 230 Volt and Electrically Connecting up, complete all as specified and as directed.

S&F Socket Out-let 15/16 Amp, 6 in 1, Flush type, 230 Volt and Electrically Connecting up, complete all as specified and as directed.

S&F Switch piano, 15/16 Amp, Flush type, 230 Volt, single pole, one way and Electrically Connecting up, complete all as specified and as directed.

S&F Ceiling Fan Regulator, Electronic Delux step socket type, 230 Volt and Electrically Connecting up, complete all as specified and as directed.

S&F Switch Bell push, Flush type, 5Amp, 230 Volt and Electrically Connecting up, complete all as specified and as directed.

S&F Switch piano, 15/16 Amp, Flush type, 230 Volt, two way and Electrically Connecting up, complete all as specified and as directed.

M&L Sub-main Wiring with 2-Runs of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Conductor drawn in Concealed PVC Conduit, heavy duty (HMS grade) or casing capping of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 3-Runs of Cable & 1-Run of PVC Conduit or casing capping will deem to be included in the Quoted Unit Rate and the same also Measured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Conduit only. Wire required for looping, etc. as ordered will deem to be included in the Quoted Unit Rate.

M&L Sub-main Wiring with 2-Runs of 10 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 10Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Conductor drawn in Concealed PVC Conduit, heavy duty (HMS grade) or casing capping of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 3-Runs of Cable & 1-Run of PVC Conduit or casing capping will deem to be included in the Quoted Unit Rate and the same also Measured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Conduit only. Wire required for looping, etc. as ordered will deem to be included in the Quoted Unit Rate.

Supply and fix in repair TP&N DBs, double door, 240 volt, 4 way complete all as specified and directed.

Supply and fix in repair SP&N DBs, double door, 240 volt, 12 way complete all as specified and directed.

Supply and fix in repair SP&N DBs, double door, 240 volt, 8 way complete all as specified and directed.

Supply and fix in repair 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 To 100 AMP and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

S&F in repair Miniature Circuit Breaker (MCB) 32 Amp, Single Pole & Neutral (SPN), 'C' Series, 50 Hz, 10 kA, 240 Volt and Electrically Connecting up, complete all as specified and as directed.

S&F in repair Miniature Circuit Breaker (MCB) 10 Amp to 32 Amp, Single Pole (SP) with rating 240 Volt, 10 KA 'C' Curve and Electrically Connecting up, complete all as specified and as directed.

Supply and fix in repair 20 watt intregated LED tube light fitting 4 ft , suitable for single phase 230 Volts, 50 Hz AC supply and mounted on wall or ceiling, complete with all accessories internally prewired and including electrically connection with copper conductor cable of size 0.5 Sqmm (nominal area) complete all as specified and directed.

Supply and fix in repair 10 watt intregated LED tube light fitting 2 ft , suitable for single phase 230 Volts, 50 Hz AC supply and mounted on wall or ceiling, complete with all accessories internally prewired and including electrically connection with copper conductor cable of size 0.5 Sqmm (nominal area) complete all as specified and directed.

Taking down/out old unserviceable or serviceable UG Cables of any Cross Sectional area and Connections including Bricks, GI Pipes, etc. of any descriptions, laid in Trenches and/or fixing with Walls/Poles including Segregating of Serviceable Materials viz Bricks, Cables, GI Pipes, etc. and keep in Safe custody for re-use, complete all as specified and as directed. (NOTE : Earth Work shall be Measured and Paid separately under relevant Items here-in-after).

Excavating in Trenches, not exc. 1.50 Metre Wide and Depth not exc. 1.50 Metre for Taking out/up and Laying of Electric Cable Lines, etc., Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps not exc. 150mm Height along the Route of the Electric Cable Lines with Surplus Soil in Soft/Loose Soil, complete all as specified and as directed

Removing of excavated materials (soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L Sand Cushioning (dry) in Trenches/Ducts for protection of UG Cables (Below, Above and Around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in Depth before Laying the Cable and 15 Cm in Depth after laying the Cable) and Consolidated (Punned) upto 180mm thickness, complete all as specified and as directed. NOTE : Punned thickness of Sand Cushioning only will be Measured for Payment.

Supply & laying Kiln burnt Sub-class ‘B’ Bricks of Size 230x115x75mm for Covering to UG Cable Protection, Laid Flat Transversally Width Equal to the Length of the Cable, complete all as specified and as directed.

Laying only old serviceable brick for Covering to UG Cable Protection, Laid Flat Transversally Width Equal to the Length of the Cable, complete all as specified and as directed.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 25 Sqmm, 3.5 Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, Protection Pipe, etc. will be Measured and Paid separately under appropriate Items.

Ditto- all as per Ser item No. 2.037 above but size 16 sq mm 4core complete all as specified and as directed.

M&L for earthing with Galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to GI strip 32 x 6 as earthing lead means of nut, bolts and washers made out of galvanized iron mild steel and 40mm dia GI pipe "light grade" for protection of earth lead and connected to test point or as directed including PCC Pit in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and RCC Cover of size 450X450X50mm in RCC 1:2:4 (20mm Graded Stone Aggregate) rein-forced with and including 8.0mm dia TMT Bars @ 100mm centre to centre both ways, Galvanized Iron Wire Mesh, Funnel, Galvanized Iron Watering Pipe 20mm Bore (dia) Medium Grade, necessary Excavation in Soft/ Loose Soil, returning, filling in and removal of surplus Soil upto a distance of 50.00 mtr and all as shown in Electrical Plate No. 5 of MES Schedule Part-I and Testing on completion complete all as specified and as directed Engr-in-charge.

M&L in repair 4.00mm GI wire Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. complete all as specified and as directed.

Supply and fixing 1200mm sweep ceiling fans complete with blades, down rods, and accessories, 230 V, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply & fix 300 mm sweep exhaust fans, AC single phase 230/ 240V with louver complete all as specified and directed.

Supply and fixing 12watt LED rechargeable emergency bulb with backup of 4Hrs(Minimum), CDL complete all as specified and as directed.

SCHEDULE OF CREDIT

DEDUCT 'TOTAL AMOUNT OF CREDIT' AGAINST 'SCHEDULE OF CREDIT' Bidder(s) shall/ will Quote the EQUAL AMOUNT (as per SCHEDULE OF CREDIT of Tender Documents)

KAY CEE CO. INDIA (BID ID -3430281)

M/S K.K.TRADERS (BID ID -3428764)

M/s JK Jangid and Company (BID ID -3429746)

M/s PRABIR ENTERPRISE (BID ID -3429800)

AKASH CONSTRUCTIONS (BID ID -3429724)

PURBANCHAL BUILDERS (BID ID -3427537)

M/s Singh enterprises (BID ID -3429596)

R K ENGINEERING ASSEMBLE (BID ID -3430366)

M/S. SUBHAS CONSTRUCTION CO. (BID ID -3429532)