Construction of Ethnographic Museum (Phase 1st) at Jagti Nagrota Jammu (Civil Part)

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: ALL KIND OF SOILS including disposal of surplus excavated earth Including cost / Carriage of material by Mechanical transport.

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m 2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge:- All kinds of soil :

Extra for every additional lift of 1.5 m or part thereof in excavation:- ALL KIND OF SOILS

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. (Including cost / Carriage of material by Mechanical transport)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: (Including cost / Carriage of material by Mechanical transport)

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level (Including cost / Carriage of material by Mechanical transport)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (Including cost / Carriage of material by Mechanical transport)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge. (Including cost / Carriage of material by Mechanical transport)

All works upto plinth level

All works above plinth level upto floor V level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels:- Thermo-Mechanically Treated bars of grade Fe-500D or more.

FORM WORK :- Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Columns, pedestrals, pillars, piers, abutments, posts and struts including all lifts upto floor V level

Lintel, beams, plinth beams, girders, bressumers and cantilevers including all lifts upto floor V level

Suspended floors, roofs, landings, balconies and access platforms, Slabs, Mumty, etc. including all lifts upto floor V level

Stairs (excluding landings) except spiral staircases. including all lifts upto floor V level

Shelves/ counters including all lifts upto floor V level:-

Edges of slabs and breaks in floors and walls:-under 20 cms wide including all lifts upto floor V level

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) including all lifts upto floor V level (Including cost / Carriage of material by Mechanical transport)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level (Including cost / Carriage of material by Mechanical transport)

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) (Including cost / Carriage of material by Mechanical transport)

Extra for half Brick masonry in superstructure above plinth level upto floor V level

Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. (Including cost / Carriage of material by Mechanical transport)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete (Including cost / Carriage of material by Mechanical transport)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood including all lifts upto floor V level

Providing and fixing 35 mm thick glazed shutters for Windows, Doors, ventilators and clerestory windows using 10 kg/sqm (4mm thick) float glass panes with lSI marked Stainless steel Butt hinges (heavy weight) of required size with necessary screws (float glass should be of make Saint Gobain or Modi float or equivalent) :- Second Class Deodar Wood including all lifts upto floor V level (Including cost / Carriage of material by Mechanical transport)

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both direction with wire of dia. 0.63 mm for doors, windows, ventilators and clerestory windows with lSI marked Stainless Steel Butt hinges (heavy weight) of required size with necessary screws :- Second Class Deodar Wood including all lifts upto floor V level (Including cost / Carriage of material by Mechanical transport)

Providing and fixing & fabrication of 35 mm thick Laminated Flush Door Shutters made up of 32 mm thick solid core flush door (Gurjan core) having 1.5 mm thick Laminate/Sunmica Matt finish on both faces & 35x6 mm thick Teak wood lipping/margin on alround of Flush door and also including fixing of door shutters with I.S.I. marked stainless steel butt hinges 100x60x2.5 mm heavy weight & necessary S.S. screws; all complete:- (32mm thick solid core flush door should of make Sonear/Archid/Green/Century or equivalent only & 1.5 mm thick Sunmica Matt finish should of make Merino/Green/Archid/Century or equivalent only & Flush door should be water proof BWP I.S. 710 grade, borer free, anti-termite, fire retardent etc.) fabrication be done at site (Including cost / Carriage of material by Mechanical transport)

Providing and fixing & fabrication of 40 mm thick Teak Veneered Flush Door Shutters made up of 32 mm thick solid core flush door (Gurjan core) having 4 mm thick Teak veneer on both faces & 40x6 mm thick Teak wood lipping/margin on alround of Flush door and also including fixing of door shutters with I.S.I. marked stainless steel butt hinges 100x60x2.5 mm heavy weight & necessary S.S. screws; all complete:- (32mm thick solid core flush door should of make Sonear/Archid/Green/Century or equivalent only & 4mm thick Teak veneer should of make Green/Archid/Century or equivalent only & Flush door should be water proof BWP I.S. 710 grade, borer free & anti-termite, fire retardent etc.) fabrication be done at site (Including cost / Carriage of material by Mechanical transport)

6mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) all complete including making of groves and scaffolding etc., all floor levels complete building (Including cost / Carriage of material by Mechanical transport)

15mm Cement plaster on the rough side of single or half brick walls of mix: 1 : 4 ( 1 cement : 6 fine sand) on interior walls ,all complete including making of groves and scaffolding, etc. at all floor levels complete including all lifts upto floor V level (Including cost / Carriage of material by Mechanical transport)

15mm Cement plaster on the rough side of single or half brick walls of mix: 1 : 6 ( 1 cement : 6 fine sand) on interior walls ,all complete including making of groves and scaffolding, etc. at all floor levels complete including all lifts upto floor V level (Including cost / Carriage of material by Mechanical transport)

20mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) ,in two coats on exterior walls, all complete including making of groves, drip course and scaffolding etc., all floor levels complete including all lifts upto floor V level (Including cost / Carriage of material by Mechanical transport)

Providing and laying of vitrified floor tiles (double charged) in different sizes (thickness to be specified by the manufacturer) (Anti-skid) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete SOMANY/ KAJARIA or equivalent only make; at all floor levels complete:- size of tile 60cmx60cm including all lifts upto floor V level (Including cost / Carriage of material by Mechanical transport)

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm including all lifts upto floor V level (Including cost / Carriage of material by Mechanical transport)

Providing and laying Ceramic glazed floor tiles 300x300 mm Antiskid (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown including all lifts upto floor V level (Including cost / Carriage of material by Mechanical transport)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size of tiles:- 300x450 mm including all lifts upto floor V level (Including cost / Carriage of material by Mechanical transport)

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) 18mm thick:- including all lifts upto floor V level

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work including all lifts upto floor V level

Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works all complete.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc.including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge complete incl. carriage, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.

Renew of glass panes with existing wooden fillets: Glass panes weighing 13.75 kg / sqm ( 5.5 mm thick) of make Saint Gobin or Modi float or equivalent ISI marked; all complete

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. (a) Crushed (Including cost / Carriage of material by Mechanical transport)

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design:In 75x75 mm deep chase (Including cost / Carriage of material by Mechanical transport)

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying complete incl. all carriages involved:- (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured. including all lifts upto floor V level (Including cost / Carriage of material by Mechanical transport)

Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations. a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) finishing the surface with 20mm thick joint less cement mortar of mix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer in-charge. With average thickness of 120mm and minimum thickness at Khurra as 65 mm including all lifts upto floor V level (Including cost / Carriage of material by Mechanical transport)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture of Birla/JK white only over the plastered wall surface to prepare the surface even and smooth complete.( Inner walls and ceilings) at all floor levels complete including scafolding:- (Including cost / Carriage of material by Mechanical transport)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28litre/10sqm over and including base coat of waterproofing cement paint applied@ 2.20kg/10sqm); and also includes a coat of weather shield protection paint over the textured surfaces all complete, of approved brand and manufacture Asian/Nerolac/Berger/Dulux paints only all complete including scaffolding etc.; at all floor levels complete:- (Including cost / Carriage of material by Mechanical transport)

Providing and Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture Asian/Nerolac/Berger/Dulux paints only on wood work (hard and soft wood) one or more coats (Including cost / Carriage of material by Mechanical transport)

Painting with ready mixed synthetic enamel paint of approved brand and manufacture Asian / Nerolac / Berger / Dulux paints only in all shades to give an even shade New steel/wood work complete at all levels (two or more coats) (Including cost / Carriage of material by Mechanical transport)

Providing and applying Melamine polishing Matt finish on Teak Veneered Flush Door Shutters of approved brand & manufacture Asian/ Nerolac/ Berger/ Dulux paints only (one or more coats); all complete

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Supplying chemical emulsion in sealed containers including delivery as specified. Chlorophriphos/Lindane emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment.(excluding the cost of chemical emulsion): Treatment of soil under existing floors using chemical emulsion (Chlorophriphos/Lindane E.C. 20% with 1% concentration) @ one litre per hole, 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floor:

Providing and fixing UV stabilised fibreglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts and nuts 8mm dia G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovings incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick flat

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

300 mm long

200 mm long

125 mm long

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper

Providing and fixing aluminium Eye Hook Latch lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or eyed to required colour or shade with necessary screws etc. complete :

Providing and fixing of Rubber Door back stopper Lever type door mounted with necessary screws/nuts etc. complete: 75 mm long

Providing and fixing aluminum round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge :- powder coated minimum thickness 50 microns aluminium

Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :

Plumbing & Sanitary :-

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solid plastic seat and lid of make Hindware/Cera/Jaquar only:- (incl. All Carriages)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:Range of two urinal basins with 5 liter white P.V.C automatic flushing cistern

Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. centre hole basin mixture, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps of make Hindware/Cera/Jaquar only:- (incl. All Carriages)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings of make Hindware/Cera/Jaquar only:- (incl. With Carriages)

Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink including waste coupling as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fitting sand brackets, cutting and making good the walls wherever required of make Kaff/Neelkanth/Hindware or equivalent all complete :- Kitchen sink without drain board 610x460mm bowl depth 200mm (incl. With Carriages)

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete. Flexible pipe 40 mm dia (With Carriages)

Providing and fixing 100 mm CP grating (hole or without hole) for gully, floor or Nahani trap.ISI marked All complete of make hindware/Cera/Jaquar only:- (With all Carriages)

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete ISI marked of make Saint Gobin or Modi float or equivalnet brand as approved by Engineer incharge at site:- (With all Carriages)

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete of make hindware/Cera/Jaquar only:-

Providing and fixing unplasticised - Rigid PVC PIPES conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap of thermal expansion;with necessary stays / clamps with fasteners having working pressure of 4kg/cm2 of make Supreme or finolex only :- all complete including testing of joints and pipes for leakage etc.:- (Including cost / Carriage of material by Mechanical transport)

50 mm dia

75 mm dia

110 mm dia

160 mm dia

Providing and fixing unplasticised - PVC moulded fittings / accessories for unplasticised - Rigid PVC pipes conforming to IS : 13592 Type A including jointing with seal ring & insertion rubber washer 3 mm thick conforming to IS : 5382 leaving 10mm gap for thermal expansion; with necessary stays / clamps with fasteners bolts and nuts complete; having working pressure of 4kg/cm2 of make Supreme or finolex only :- all complete including testing of joints and pipes for leakage etc.:- (Including cost / Carriage of material by Mechanical transport)

PVC PLAIN BEND (of required degree):-

50 mm dia.

75 mm dia.

110 mm dia

160 mm dia.

PVC DOOR BEND( of required degree):-

75 mm dia.

110 mm dia

PVC PLAIN TEE:-

50 mm dia.

75 mm dia.

110 mm dia

160 mm dia.

PVC DOOR TEE:-

50 mm dia.

75 mm dia.

110 mm dia

160 mm dia.

PVC REDUCER PLAIN TEE:-

110 mm x 75 mm

PVC REDUCER DOOR TEE:-

110 mm x 75 mm

PVC OFFSETS:-

50 mm PVC off sets

75 mm PVC off sets

110 mm PVC off sets

160 mm PVC off sets

PVC COUPLER/COLLAR:-

50 mm dia

75mm dia

110mm dia

160 mm dia

PVC VENT COWL:-

110mm dia

PVC FLOOR/NAHANI TRAP:-

110 mm x 75 mm

110 mm x 100 mm

PVC P/Q/S TRAP:-

100 mm dia.

Providing and fixing Soap dish (C.P. brass) with brackets ,nuts & screws complete etc. of make hindware/Cera/Jaquar only:- (With all Carriages)

Providing and fixing (C.P. Brass ) towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing towel rail 600mm long (C.P. brass) with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.with brackets ,nuts & screws complete etc. of make hindware/Cera/Jaquar only:- (With all Carriages)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 of make hindware/Cera/Jaquar only:-. (a)15 mm nominal bore (With all Carriages)

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms of make hindware/Cera/Jaquar only: (With all Carriages) a) 15 mm nominal bore

Providing and fixing C.P.Brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931 of make hindware/Cera/Jaquar only: (With all Carriages) a) 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin/wall mixer and geysers points of approved make conforming to IS : 8931 15 mm nominal bore of make hindware/cera/jaquar or as approved by site incharge (With all Carriages)

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore (With all Carriages)

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge all complete of make hindware/Cera/Jaquar only:-. (With all Carriages)

Providing and fixing C.P. Brass Central Hole BASIN MIXER without Popup Waste System with 450mm Long Braided Hoses with necessary screws, brackets, nuts or bolts etc; all complete of make hindware/Cera/Jaguar only:- (With all Carriages) (a) 15 mm nominal bore

Providing and fixing C.P. Brass SINK MIXER with Swinging Spout (Wall Mounted Model) With Connecting Legs & Wall Flanges with necessary screws, brackets, nuts or bolts etc; all complete of make hindware/Cera/Jaguar only:- (With all Carriages) (a) 15 mm nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.(internal work) of make Jindal/Surya Prakash of medium class or as approved by site incharge (INTERNAL WORK-Exposed on wall) all complete including testing of pipes and fittings and joints for leakage with pressure pump etc. (Incl. all carriages)

15 mm dia. nominal bore (medium)

20 mm dia. nominal bore (medium)

25 mm dia. nominal bore (medium)

32 mm dia. nominal bore (medium)

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, Concealed pipe including painting with anti-corrosive bitumastic paint(two coats) over a ready mixed priming coat , cutting chases and making good the wall , all complete including testing of pipes and fittings and joints for leakage with pressure pump etc.of make Jindal/Surya Prakash of medium class or as approved by site incharge (Incl. all carriages)

15 mm dia. nominal bore (medium)

20 mm dia. nominal bore (medium)

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (EXTERNAL WORK) of make Jindal/Surya Prakash of medium class or as approved by site incharge all complete including testing of pipes and fittings and joints for leakage with pressure pump etc. (Incl. all carriages)

25 mm dia. nominal bore

32 mm dia. nominal bore

Making connection of G.l. distribution branch with G.l. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete all complete including testing of pipes and fittings and joints for leakage with pressure pump etc.of make UNIK or NEW or equivalent as approved by site incharge:- 25 to 40 mm nominal bore (Incl. all carriages)

Providing and fixing G.l. Union in G.l. pipe including cutting and threading the pipe and making long screws etc. complete (new work) all complete including testing of pipes and fittings and joints for leakage with pressure pump etc.of make UNIK or NEW or equivalent as approved by site incharge (Incl. all carriages)

25 mm nominal bore

32 mm nominal bore

Providing and filling sand of coarser grade alround the G. I. pipes in external work.:- 32 mm dia. nominal bore (Including cost / Carriage of material by Mechanical transport)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license] (incl. cost / carriage of material upto roof top).

Providing and fixing G.I.TANK NIPPLE of suitable dia. of make UNIK or NEW or equivalent ISI marked as approved by engineer incharge at site all complete including testing of fittings and joints for leakage etc.:- (incl. all carriages) :- 32 mm dia. nominal bore

Providing & fixing BRASS BALL VALVE of approved quality conforming to IS : 8931 of make UNIK or DRP or as approved by site incharge (incl. all carriages)

25 mm nominal bore

32 mm nominal bore

Providing and fixing BRASS FLOAT BALL VALVE; High or low pressure with plastic floats:- of approved quality conforming to IS : 8931 of make UNIK or DRP or approved by engineer incharge at site:- 32 mm nominal bore (incl. all carriages)

Providing and fixing Gun metal gate valve with C.l. wheel of approved quality (screwed end) conforming to IS : 8931 of make UNIK or DRP or as approved by site incharge :- 32 mm nominal bore (incl. all carriages)

Providing and fixing Brass Foot valve with strainer/filter of approved quality (screwed end) conforming to IS : 8931 of make UNIK or DRP or as approved by site incharge:- 32 mm nominal bore (incl. all carriages)

Providing and fixing of stainless steel Rainwater Khurra JALI of 150 mm dia. to be placed at roof and mumty levels of make CHILLY or CAMRY or equivalent all complete:- square or circular in shape of dia/size:- (incl. all carriages)

Providing & Installation of 1.5 H.P. three phase water pump of make Crompton with all fittings, connecting inlet & outlet, fixtures, electrical connection and starter all complete:- (incl. all carriages)

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks (Including cost / Carriage of material by Mechanical transport)

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 gradedstone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. (Including cost / Carriage of material by Mechanical transport)

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design (Including cost / Carriage of material by Mechanical transport)

Inside size 90x80 cm and 45 cm deep including C.l. cover with frame (light duty) 455x610 mm. internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg):- With F.P.S. bricks with class designation 75 & with Crushed stone aggregate

Inside size 90x80 cm and 60 cm deep including C.l. cover with frame (light duty) 455x61 0 mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :- With F.P.S. bricks with class designation 75 & with (a) Crushed stone aggregate

Supply & fixing CI cover with frame for manhole in sump / septic tank 455 x 610mm rectangular CI cover (light duty) the weight of the cover to be not less than 23 Kg

Making soak pit 2.5 m diameter 3.0 metre deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design by way of earth excavation by mechanical means; laying of 100 mm thick P.C.C. bed in 1:4:8 mix ratio & R.C.C. Slab on top in 1:1.5:3 mix ratio; providing and fixing of Manhole with MS frame and cover having passing of 50 mm dia. Vent air pipe through it for foul gases; brick masonry in 1:6 cement mortar mix with providing of pores; and filling of brick bat aggregates around the dry brick honey comb shaft; P/F of pvc bend/tee at the S.W. Drain pipe; all complete etc:- With F.P.S. bricks and Crushed (Including cost / Carriage of material by Mechanical transport)

Note:- Including lift, cost / Carriage of material by Mechanical transport

M/S SUBZAR AHMAD ROY