SPECIAL REPAIRS TO BLDG NO E-05 AT MADUKKARAI UNDER GE WELLINGTON

Amount

Dismantling of single layer mangalore pattern roofing tiles complete all as specified and as directed.

Dismantling of battern for tiles shingles etc spaced exceeding 15 cm C/C etc complete all as specified and as directed.

Dismantling timber scantling 40 Sqm.cm and over in section in any position (unframed/ framed work ) complete all as specified and as directed.

Dismantling post or struts wood of any section including taking out in concrete or brick masonry etc and making good in disturbed ground complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain sheet 0.45mm to 0.50 mm thick of any colour having tensile strength 550 mpa as in ridges, fixed with self tapping screws complete all as specified and as directed.

Excavation in post holes(or similar holes) each not exc 0.50 cum and getting out in hard/dense soil,returning,filling in and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm complete all as specified and as directed.

M&L for cement concrete in foundations, fillings and mass concrete, PCC type C2 1:3:6 (40mm graded aggregate) complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channels or flat section) including distance pieces, cleats etc.of grade Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed.

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item no 10 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for providing precast cement concrete in lintels in PCC Type B1 1:2:4 using (20mm graded aggregate) in CM 1:4 complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in lintels upto 1.50m clear span, cills, steps; seismic and other similar bands, copings, bed plates, bed blocks and the like incl necessary use and waste of formwork complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 Sqm and n exc 4sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

S&F pressed steel frames of size 165x60 mm for doors with one or more rebates including necessary fixing lugs ,lock strike plate etc , complete all as specified and directed.

S&F pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs ,lock strike plate etc , complete all as specified and directed.

S&F second class hard wood Plain, framed, panelled shutters 35 mm thick(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed.

S&F 2nd class Hard wood 30 mm thick Glazed and skeleton shutters, open rebated prepared to receive glass/gauze etc. edges of framing, divided in to squres with plain chamfered or rounded, fitted with cut mitered beads for securing glass/gauze all as specified and directed including chiselling and planing of wooden existing frame to receive the shutter complete all as specified and directed. Note: Glazing and gauze will be measured separately

M&L for providing plain cement concrete 1:3:6 Type C0 (using 12.50 mm graded stone aggregate) as in filling hollow of pressed steel frame complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled 150mm long complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled 100mm long complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section 150 mm length.complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type 150 mm size, anodized complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodized sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, over all length 140 mm complete all as specified and directed.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 3mm thickSheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane complete all as specified and directed.

S&F ground or obscured or frosted on one side sheet glass 4 mm thick, ordinary quality and glazing with oil putty in squares not exc 0.50 sqm in each pane all as specified and directed

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars,dovetailed or welded complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg, stay fixed including welding complete all as specified and directed. (Box type frame and shutter)

S&F framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes; framed guard bars; choukats and doors similar work conforming to Fe 410-0 or Fe-310-0 complete all as specified and directed.

Demolition of cement concrete in ground floors (including tiles /floor finishes) and pavings n exc 15 cm thickness (Below or above GL) complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded Aggregate in flooring 40mm thick using extra cement complete all as specified and as directed.

Taking down cement or cement lime plaster on brick/stone walls incl racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for 15mm thick rendering on brick wall/ concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on brick wall/ concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for washing rubbing down and stopping of previously painted surfaces and applying two coats of cement base paint on old surfaces of walls including complete removal of existing treatment complete all as specified and directed.

M&L for washing rubbing down and stopping of previously painted surfaces and applying two coats of oil bound distemper on old wall surfaces including removal of existing treatment complete all as specified and as directed.

M&L for preparing surfaces of wall and applying two coats of distemper over a coat of primer on newly plastered wall surface complete all as specified and directed.

M&L for preparing surfaces of wall and applying two coats of cement based paint on newly plastered wall surface complete all as specified and directed.

M&L Preparation of new wood surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preparation of new steel surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L 50 mm thick PCC 1:3:6 type C2(using 40 mm graded agg) as in plinth protection laid and finished in bays not exc 3 meter c/c and filling the joints with mastic bitumen complete all as specified and directed.

UNIQUE INDIA CONSTRUCTIONS

M/s Shana Constructions

p.chinnasamy