SPECIAL REPAIR OF FMU BUILDING NO P 49 AT NAVAL DOCKYARD UNDER GE (NW) KUNJALI, COLABA, MUMBAI

Amount

Taking down chowkat with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4 Sqm each.

Taking down chowkat with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of debris out of MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Supply & Fixing solid PVC door frame of size 50mm x 47mm made out of 5mm wood grains printed PVC sheet reinforced with MS square tube and edges painted to match with printed sheet complete all as specified and directed.

S&F 30 mm thick factory made solid panel PVC door shutter (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame as per specification and drawings shown in SSR Part II complete all as specified and as directed by Engr-in-Charge.

M & L for 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified.

M&L for 35 mm thick second class hard wood plain, framed factory made panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I),kiln seasoned and chemically pressure treated complete all as specified.

Supply & Fixing 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

Supply & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

Supply & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

Supply & Fixing 200 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts, ISI marked complete all as specified.

Supply & Fixing 150mm long Aluminium anodized handle of extruded sections, ISI marked complete all as specified .

S&F butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified

Supply & Fixing 200mm long aluminium anodized barrel tower bolts of extruded sections, ISI marked complete all as specified and directed.

S & F Floor door stopper of aluminium alloy body 150 mm long and tongue, anodised, with hard drawn steel spring, fixed in floor.

Supply & Fixing mild steel flat iron 25 x 3 mm such as in hold fast etc or similar small articles conforming to Fe- 410-0 or 310-0. Complete all as specified and as directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm laid in floor over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified. Note :Sample from latest catalouge shall be get approved from Engr-in-Charge.

Material & Labour for coloured glazed ceramic tiles 450mm x 300mm x 7mm thick but laid on vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile including making triangular filleting on top of skirting complete all as specified. Note :Sample from latest catalouge shall be get approved from Engr-in-Charge.

Material & Labour for Acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors laid over and including 20mm thick screed bed in CM 1:4 complete all as specified.

Material & Labour double charge premium quality vitrified ceramic tiles 10mm thick light shade (600 x 600 mm) polished area of each tiles not exceeding 0.36 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 complete all as specified and directed. Note :Sample from latest catalouge shall be get approved from Engr-in-Charge.

Material & Labour double charge premium quality vitrified ceramic tiles 10mm thick (600 x 600 mm) polished area of each tiles not exceeding 0.36 Sqm, as in skirting /vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 10mm thick backing coat in CM 1:3 complete all as specified and directed. Note :Sample from latest catalouge shall be get approved from Engr-in-Charge.

Material & Labour for 25 mm thick Cement concrete 1:2:4 Type B1 using 20 mm graded stone aggregate complete all as specified and directed.

Taking up and down 15 mm bore GI tubing with all connections complete all as specified and directed.

Taking up and down 20 mm bore GI tubing with all connections complete all as specified and directed.

Taking up and down 25 mm bore GI tubing with all connections complete all as specified and directed.

S&F 15 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings with suitable size GI clamps or laid in floors complete all as specified.

S&F 20 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings with suitable size GI clamps or laid in floors complete all as specified.

S&F 25 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings with suitable size GI clamps or laid in floors complete all as specified.

Supply & Fixing in repairs fancy type chromium plated stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

Supply & Fixing in repairs vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding complete all as specified and directed.

Supply & Fixing in repairs vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing blts, flushing cistern and flush pipe) complete all as specified and directed.

Supply & Fixing in repair seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover amnd mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply & Fixing in repair 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm.

Supply & Fixing in repair health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as directed.

Supply & Fixing in repairs toilet paper holder of viterous china box type white coloured fixed to walls with chromium plated brass screws complete all as specified and directed.

Supply & Fixing in repairs brass CP towel rail, 20mm dia, D type , 60 cm long between flanges complete all as specified.

Supply & Fixing in repair counter top wash hand basin (Min size 480mm x 380mm x 140mm) incl chromium plated brass waste coupling , PVC waste pipe 32 mm bore and brass CP bottle trap 32 mm bore complete all as directed

Supply & Fixingin repair fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and 15 mm bore of pipe

Supply & Fixing in repair 15mm bore fancy type bib taps chromium plated cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed (weight not less than 1200gms).

Supply & Fixingof in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and as directed by Engr-in-Charge..

Supply & Fixing in repairs 32mm dia PVC waste pipe for urinals complete all as specified and directed.

Material & Labour in repairs for viterous china urinal partition white of size 310 x 700mm urinal partions slabs, terminating about 40cm above floor, complete all as specified and directed.

Supply & Fixing 160mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket suitable for 110mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified.

Supply & Fixing 110mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket suitable for 110mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified.

Supply & Fixing PVC (SWR) bends any radius 160mm bore complete all as specified and as directed

Supply & Fixing 75mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket suitable for 110mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified.

Supply & Fixing PVC (SWR) bends any radius 75mm bore complete all as specified and directed.

Supply & Fixing 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

Taking down 150mm bore CI pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints complete all as specified and directed.

Taking down 100mm dia bore CI pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints complete all as specified and directed.

Taking down 75mm dia bore CI pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints complete all as specified and directed.

Material & Labour for 150 mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints including CI pipe collar wholseal fixed to walls with suitable size GI clamps complete all as specified and directed.

Material & Labour for 100 mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints including CI pipe collar wholseal fixed to walls with suitable sizeGI clamps complete all as specified and directed.

Material & Labour for 75 mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints including CI pipe collar wholseal fixed to walls with suitable size GI clamps complete all as specified and directed.

Supply & Fixing CI bends (any radiius) diminishing pieces or trapers (larger bore measured) fitted with oval access doors of following sizes

75mm bore

100 mm bore

150mm bore

Supply & Fixing CI branch pieces single (equal or unequal) ,T pieces,Y(equal or unequal) ordinary or inverted ( spigot or socket type) or with parallel branches of following sizes:-

75 mm bore

100 mm bore

150 mm bore

Supply & Fixing cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1, diameter of outlet 75mm bore complete all as specified and directed by Engr-in-Charge .

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar (1:6) and finished even and smooth with and including 1 mm thick sagol complete all as specified.

Material & Labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

Material & Labour prepration of old plastered / decorated surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceiling in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified.

Material & Labour for rendering 15 mm thick pre polymer modified ready mixed cement based plaster in two coats 10 mm thick base coat and 5 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required complete all as specified and directed.

Material & Labour for rendering 10 mm thick pre polymer modified ready mixed cement based plaster on chajja top and soffits Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required complete all as specified and directed.

M&L preparation of old plastered and cracked surfaces of external wall, applying two coats of non dilutable Dr.Fixit Raincoat over a coat of Dr.Fixit primeseal primer having dft of 110 micron and elongation of >200% complete all as specified and as per manufaturer instructions

Material & Labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

Material & Labour for Complete removal of existing treatment of walls and applying two coats of acrylic (antifungal) (Raincoat) exterior grade paint of over one coat of primer on wall including necessary scaffolding complete all as specified and directed

Material & Labour for preparation of New painted steel surfaces of any description over 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Material & Labour for preparation of old painted steel surfaces of any description over 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Material & Labour for brickwork with sub class 'B' bricks (old bricks) , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed

Material & Labour for brick work with sub class 'B' bricks (old bricks) straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified.

Material & Labour for PCC 1:7:12 type F2 using 40 mm graded stone aggregate as in filling of sunken portion complete all as specified .

Material & Labour for 40mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement as in floor complete all as specified . Note-WPC will be measured and paid separately.

Supply only Water proofing compound .

Supply & Fixing in repairs aluminium (extruded section) body door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg & fixed complete all as specified and directed.

Material & Labour for preparation of old wall surfaces of any description and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of self primer including necessary scaffolding and safety arrangement complete all as specified.

Material & Labour preparation of old plastered and cracked surfaces of walls external , applying two coats of non dilutable Dr.Fixit Raincoat over a coat of Dr.Fixit primeseal primer having dft of 110 micron and elongation of >200% on external surface as per manufaturer instruction complete as specified and directed by Engineer-in- charge.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering.

Supply & Fixing aluminium anodized snap grid of size 605 mm x 605 mm with aluminium anodized angle 20 mm x 20 mm x 1.2 mm fixed to wall along the perimeter of ceiling with the help of nylon sleeves & screws, at 610mm centres and main and cross tees of size 31.75 mm x 31.75 mm x 1.6mm & 25.4 mm x 25.4 mm x 1.22 mm respectively with ceiling cleats / angle brackets of size 15 mm x 15 mm x 1.5 mm complete all as specified.

Supply & Fixing Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F non asbestos fibre cement building boards 600mm x 600mm x 4mm thick of approved design and colour fixed or laid/inserted in aluminium grid false ceiling complete all as specified.

Supply & fixing in repairs powder coated aluminium sections for partitions, windows, ventilators and doors including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, cleats etc including all accessories such as glazing clips, handles, tower bolts, rollers rubber beadings for fixing glass panes in frame including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete all as specified Note: - (i) Glass panes will be measured & paid separately. (ii) The rate quoted shall be inclusive of neoprene beading, glazing clips, screws, etc. as required but shall not be measured for arriving of weight. (iii) Minimum thickness of powder coating shall be 25 micron. (iv) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel around contacting surface of aluminium work with matching existing area. (v) The size of aluminium sections shall be as per HQ CE(N) MZ TD drawing No TD/2021/01 to 05 .

Material & Labour for 4.8 mm thick plain sheet glass ordinary quality in squares n exc 0.5sqm in each pane fixed with rubber beading in aluminium windows/doors complete all as specified and directed.

Material & Labour for 4.8 mm thick plain sheet glass ordinary quality in squares exc 0.5sqm in each pane fixed with rubber beading in aluminium windows/doors complete all as specified and directed.

Supply & Fixing aluminium grill with and including suitable aluminium anodised frame F/H section as required manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick all as specified and as directed by Engr- in- charge.

Supply & Fixing aluminium alloy wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple complete all as specified and as directed

Supply & Fixing in repair 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work/metal Frame Work.

Supply & Fixing in repair 9 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work/metal Frame Work.

Supply & Fixing 4mm thick bakelite sheet with decoratve choice, laminated on both side complete all as specified and as directed

Complete removal of existing water proofing treatment upto concrete surface of roof slab of any thickness including removing debris outside MD land complete all as specified and directed.

Cleaning of existing surface to remove dust, loose particles etc with compressed air or any other suitable technique depending on site conditions, grinding any sharp edges and washing out with water complete all as specified and directed.

Material & Labour for Podium waterproofing system with SikaShield W159 SBD in 1.5mm : Providing and applying SikaShield W159 SBS IN 1.5, a 1.5mm thick modified bitumen waterproofing membrane with cross laminated HDPE film for wet application on the retaining wall. The membrane shall be applied after making concrete wall in saturated surface dry condition and applying a bonding slurry SikaShield W1 IN. The membrane is then unrolled and pressed into the fresh slurry after removal of the release liner. Both long and short edges of the membrane are overlapped by min. 80mm and firmly pressed together using a roller with staggered overlaps. The membrane shall have a tensile strength~25 MPa according to ASTM D412; elongation~500% according to ASTM D412; resistance to static puncture~900N according to ASTM E154; adhesion in peel~1.8N/mm according to ASTM D903 mod; resistance to lateral water migration~71m according to ASTM D5385 mod. complete all as specified and directed by EIC.

S&F pre-painted hot- dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.5 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.

S&F pre-painted hot- dip aluminium-zinc alloy metallic coated plain steel sheet, corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.5 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.

Material & Labour for PCC 1:2:4 type B2 using 40mm graded stone aggregate as in foundations, fillings & mass concrete including necessary formwork complete all as specified and directed

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

M&L for machine cut, machine polished granite stone slab 20mm thick in skirting/dado set, bedded and jointed with white cement paste and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including backing coat 10 mm thick in cement mortar (1:3) complete all as specified.

M&L for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid to line and slope over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified .

M&L for chequered cement concrete tiles 250 mm x 250 mm x 20 mm thick, with grey cement mixed with pigment machine pressed; set, jointed and pointed in neat cement slurry laid over and including 15 mm thick screed bed in cm (1:4), and cut and polished as specified in SSR Part I complete all as specified.

Supply & Fixing in repairs rotational moulded polythylene water storage loft tank of 300 ltr capacity including all connections for inlet, outlet, over flow and wash out etc including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) hoisted and fixed in position all as specified in SSR Part-I

S&F in repairs rolled mild steel in framed work as in door or gate of angle or other section with gusset plates, rails, braces etc complete. Doors/gates to be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings and hanging, rollers also fastening and fixing conforming to Fe-410-W (Gde E-250) complete all as specified.

Removing debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, in soil outside MD land.

Supply & Fixing in repair coloured powder coated Drapery Rod of aluminum 25mm inner dia With suppored on coloured powder coated aluminum decorative type design and pattern approved by GE including Stainless steel brackets at both ends complete all as apecified and directed

Taking down carefully copper / aluminium point wiring (light, fan socket or power) through steel / PVC conduit / casing caping including complete fittings such as switches, ceiling roses, pendants, regulators, sockets, buzzer, bell, switch sockets, etc and making good to the disturbed surfaces of walls/ceiling etc, with its original specification complete all as specified and directed.

Material & labour for concealed point wiring with 1.5 sqmm single core multistranded FRLS PVC insulated, sheated copper conductor cable,1100 volts grade conforming to IS- 694:1990 drawn through and including rigid non-metallic PVC conduit medium grade not less than 25mm bore, ISI marked with all accessories concealed in wall/ floor and terminated in and including concealed PVC modular metal box with modular white cover plate with frame of sutable size including one FRLS PVC insulated and sheathed multistanded copper conductor cable 1.5 sqmm as earth continuity conductor connected to common earth dolly for the following :- Note : - i) The work shall be carried out conforming to IS-732:1989. ii) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green. iii) Cutting chases, pinning in, making good to facings required for concealed conduit wiring shall be deemed to be included in rate quoted

One light point controlled by one switch

One ceiling fan/wall fan/exhaust fan point controlled by one switch

One 5 Amps switch socket combination on independent board

One 5A flush type switch socket point on same board

Material & labour for concealed point wiring with 2.5 sqmm single core multistranded FRLS PVC insulated, sheated copper conductor cable,1100 volts grade conforming to IS- 694:1990 drawn through and including rigid non-metallic PVC conduit medium grade not less than 25mm bore, ISI marked with all accessories concealed in wall/ floor and terminated in and including concealed PVC modular metal box with modular white cover plate with frame of sutable size including one FRLS PVC insulated and sheathed multistanded copper conductor cable 2.5 sqmm as earth continuity conductor connected to common earth dolly for one 3 pin socket outlet 15 Amps on the independent board. Note : - i) The work shall be carried out conforming to IS-732:1989. ii) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green. iii) Cutting chases, pinning in, making good to facings required for concealed conduit wiring shall be deemed to be included in rate quoted

Material & labour for concealed point wiring with 4 sqmm single core multistranded FRLS PVC insulated, sheated copper conductor cable,1100 volts grade conforming to IS- 694:1990 drawn through and including rigid non-metallic PVC conduit medium grade, not less than 25mm bore, ISI marked with all accessories concealed in wall/ floor and terminated in and including concealed PVC modular metal box with modular white cover plate with frame of sutable size including one FRLS PVC insulated and sheathed multistanded copper conductor cable 4 sqmm as earth continuity conductor connected to common earth dolly for each workstation point comprising of 02 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note : - i) The work shall be carried out conforming to IS-732:1989. ii) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green. iii) Cutting chases, pinning in, making good to facings required for concealed conduit wiring shall be deemed to be included in rate quoted

M&L for concealed sub-main wiring with 2 runs of 10 Sqmm PVC insulated and unsheathed multi-stranded copper conductor cable (FRLS grade), 1100 volts grade, ISI marked conforming to IS- 694:1990, drawn through and including rigid non-metallic PVC concealed conduit medium grade not less than 25mm bore, ISI marked with all accessories such as Bends, Tees, Elbows,coupler etc including one run of 10 Sqmm dia PVC insulated and unsheathed multi-stranded copper conductor cable (FRLS grade), 1100 volts grade, ISI marked conforming to IS- 694:1990 as earth dolly/mains connected with thimble from main DB to sub main DB including taking down existing submain wiring and making good distrubed surfaces as per existing complete all as specified and directed. Note: (i) 03 Runs x 10 Sqmm copper cable and 01 run of PVC conduit shall be measured as 01 RM. ii) The work shall be carried out conforming to IS-732:1989. iii) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green. iv) Cutting chases, pinning in, making good to facings required shall be deemed to be included in rate quoted

M&L for concealed sub-main wiring with 2 runs of 4 Sqmm PVC insulated and unsheathed multi-stranded copper conductor cable (FRLS grade), 1100 volts grade, ISI marked conforming to IS- 694:1990, drawn through and including rigid non-metallic PVC concealed conduit medium grade not less than 25mm bore, ISI marked with all accessories such as Bends, Tees, Elbows,coupler etc including one run of 4 Sqmm dia PVC insulated and unsheathed multi-stranded copper conductor cable (FRLS grade), 1100 volts grade, ISI marked conforming to IS- 694:1990 as earth dolly/mains connected with thimble from main DB to sub main DB including taking down existing submain wiring and making good distrubed surfaces as per existing complete all as specified and directed. Note: (i) 03 Runs x 4 Sqmm copper cable and 01 run of PVC conduit shall be measured as 01 RM. ii) The work shall be carried out conforming to IS-732:1989. iii) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green. iv) Cutting chases, pinning in, making good to facings required shall be deemed to be included in rate quoted

M&L for concealed sub-main wiring with 4 runs of 6 Sqmm PVC insulated and unsheathed multi-stranded copper conductor cable (FRLS grade), 1100 volts grade, ISI marked conforming to IS- 694:1990, drawn through and including rigid non-metallic PVC concealed conduit medium grade not less than 25mm bore, ISI marked with all accessories such as Bends, Tees, Elbows,coupler etc including one run of 6 Sqmm dia PVC insulated and unsheathed multi-stranded copper conductor cable (FRLS grade), 1100 volts grade, ISI marked conforming to IS- 694:1990 as earth dolly/mains connected with thimble from main DB to sub main DB including taking down existing submain wiring and making good distrubed surfaces as per existing complete all as specified and directed. Note: (i) 05 Runs x 6 Sqmm copper cable and 01 run of PVC conduit shall be measured as 01 RM. ii) The work shall be carried out conforming to IS-732:1989. iii) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green. iv) Cutting chases, pinning in, making good to facings required shall be deemed to be included in rate quoted

M&L for concealed sub-main wiring with 4 runs of 10 Sqmm PVC insulated and unsheathed multi-stranded copper conductor cable (FRLS grade), 1100 volts grade, ISI marked conforming to IS- 694:1990, drawn through and including rigid non-metallic PVC concealed conduit medium grade not less than 25mm bore, ISI marked with all accessories such as Bends, Tees, Elbows,coupler etc including one run of 10 Sqmm dia PVC insulated and unsheathed multi-stranded copper conductor cable (FRLS grade), 1100 volts grade, ISI marked conforming to IS- 694:1990 as earth dolly/mains connected with thimble from main DB to sub main DB including taking down existing submain wiring and making good distrubed surfaces as per existing complete all as specified and directed. Note: (i) 05 Runs x 10 Sqmm copper cable and 01 run of PVC conduit shall be measured as 01 RM. ii) The work shall be carried out conforming to IS-732:1989. iii) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green. iv) Cutting chases, pinning in, making good to facings required shall be deemed to be included in rate quoted

Supply & Fixing in repair LED fitting 36W of efficiency not less than 120 lumen per watt of size 2' x 2' LED Slim panel with recess mounting, powder coated white CRCA full glow LED panel including control gear and lamp complete all as specified.

Supply and fix in repair decorative Post top lantern 45 Watts of efficiency not less than 120 lumen per watt includig fixing of suitable size GI pipe for mounting and making good distrubed surfaces all as specified and directed with post top lantern parameters as follows:- system wattage 45 W, 6500K, IP protection = IP 65, PF≥ 0.90, Resistance to impact and corrosion. Glare free and better uniformity Milky version

Supply and fixing in repairs LED Highbay lights of efficiency not less than 120 lumen per watt , 5700K equiped with 4 kv inbuilt and 10 kv external surge protection, IP66 protection rating complete all as specified and directed.

Supply and fixing in repair 60W LED Street/building security light fittings with high pressure die cast housing with toughened glass and individual LED with secondary optics and IP66 protection of efficiency not less than 110 lumen per watt complete all as specified and directed.

Supply and fixing in repair walll/surface mounted 20W LED batten fitting of efficiency not less than 120 lumen per watt, engineering plastic battern with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with twin core copper conductor cable of suitable size complete all as specified and directed.

Supply and fix switch modular type 1 way 6 Amps 1 module 240 volts.

Supply and fix switch modular type 1 way 16 Amps 1 module 240 volts

Supply and fix modular socket 6 Amps 2/3 pin 240 volts AC combined 2 module all as specified and directed by Engr-in-Charge.

Supply and fix modular socket 16 Amps 2/3 pin 240 volts Ac combined 2 module all as specified and directed by Engr-in-Charge.

Supply & Fixing Modular fan regularor, 120W, 2 module all as specified and directed by Engr-in-Charge

Material & Labour for shifting of Split AC/Window unit from existing postion & refixing in new position/location including additional accerssories as required, brazing of existing copper pipe with new copper pipe, leak testing including commissioning and testing complete all as specified and directed by Engineer-in-Charge. Note : The cost of spray painting with white colour to the cover of window AC/Outdoor unit of split AC is deemed to be included in the quoted rate.

Supply and fixing in repairs copper tubings of appropriate dia for suction line & for liquid discharge line duly insulated with suitable insulation material including making hole in wall for passing through pipe and making good distrubed surface as per existing complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs 20 Amps Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 'C-Curve'.

S& F in repair of GI cable tray perforated type 2 mm thick of size 250x50mm ( Including pre fabricated GI clamp suitable for fixing/supporting ) with0.71mm thick aluminium sheet cover, alloy 31000 H4 cable trucking for plain to be fixed on any wall (brick/stone) vertically/horizontally including all accessories and necessary bending,shaping,drilling,welding, cutting & all fixing arrangement complete etc all as directed. Note : The cost of taking down existing cables of any size from the original location and re-fixing on the cable tray is deemed to be included in the quoted rate by the contrator.

S& F in repairs GI cable tray perforated type 2 mm thick of size 650x50mm ( Including pre fabricated GI clamp suitable for fixing/supporting ) with0.71mm thick aluminium sheet cover, alloy 31000 H4 in ridges, Hips vally gutter cable trucking for plain to be fixed on any wall (brick/stone) vertically/horizontally including all accessories and necessary bending,shaping,drilling,welding, cutting & all fixing arrangement complete etc all as directed. Note : The cost of taking down existing cables of any size from the original location and re-fixing on the cable tray is deemed to be included in the quoted rate by the contrator.

Disconnecting and taking down the fan and Overhauling of ceiling fan any size and make, dismantling parts, properly cleaning/removing old existing grease oil and applying new oil grease, varnishing of winding, cleaning dust, rust and applying two coat white enamel paint over a coat of steel primer, replacement of capacitors, canopies etc assembling and refixing at same position complete all as specified and directed by the Engr-in-Charge.

Supply and fixing wall mounted fan, metal, 450 mm size, 1440 RPM, 240 volts complete all as specified and directed.

Supply & Fixing in repairs hanger clamp assembly with down rod up to 3 feet for hanging of ceiling fan with nuts,bolts,washers & split pin complete all as specified .

Supply and fix in repair ceiling rose surface bakelite three terminal of size 60x50 mm,240 Volts AC complete all as specified and directed.

Supply & Fixing in repairs steel sheet enclosure double door type IP54 IK09 protection DB SPN 8 way, 240 volts AC factory made, suitable for housing MCB SPN along with 200 Amps copper bus bar complete all as specified and directed

Supply & Fixing steel sheet enclosure double door type IP54 IK09 protection DB SPN 4 way, 240 volts AC factory made, suitable for housing MCB SPN along with 200 Amps copper bus bar complete all as specified and directed

Supply & Fixing in repairs steel sheet enclosure double door type IP54 IK09 protection DB SPN 12 way, 240 volts AC factory made, suitable for housing MCB SPN along with 200 Amps copper bus bar complete all as specified and directed

Supply & Fixing in repair distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting TPN 12 way, 440 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed.

Supply & Fixing in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting TPN 6 way, 440 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed.

Supply & Fixing in repair MCB SP 6 - 32 Amps, 10 KA Rupturing capacity complete all as specified and directed.

Supply & Fixing in repair MCB SPN 40-63 Amps, 10 KA Rupturing capacity complete all as specified and directed.

Supply & Fixing in repairs PVC body exhaust fan of size 300mm sweep complete set with louvers connecting up including provn of three core flexible copper wire of size 23/0.0076 from ceiling rose to exhaust fan including taking down old unserviceable fan complete all as directed.

Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( averaSchneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof incl all as specified . Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

Supply & Fixing 20 Amps Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 'C- Curve'.

S & F in repair 4mm GI earth strip continuity conductor or main earthing lead fixed to wall or buried in ground or drawn in conduit/ pipe or fixed to panel body/motor body/any other equipment complete all as specified

Supply laying & testing in repairs cable XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded copper conductor of size 25sqmm 4 core in trenches/along wall/floor including fixing arrangement complete all as specified and directed. Note : The cost of Aluminium thimbles/lugs and cable gland etc shall be included in quoted rate and no extra payment will be made for it.

Supply laying & testing in repairs cable XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded copper conductor of size 35 sqmm 4 core in trenches/along wall/floor including fixing arrangement complete all as specified and directed. Note : The cost of Aluminium thimbles/lugs and cable gland etc shall be included in quoted rate and no extra payment will be made for it.

Supply laying & testing in repairs cable XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded copper conductor of size 16 sqmm 4 core in trenches/along wall/floor including fixing arrangement complete all as specified and directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply laying & testing in repairs cable XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded copper conductor of size 50 sqmm 4 core in trenches/along wall/floor including fixing arrangement complete all as specified and directed. Note : The cost of Aluminium thimbles/lugs and cable gland etc shall be included in quoted rate and no extra payment will be made for it.

Supply & Fixing in repairs LED garden light 15W of efficiency not less than 110 lumin/watt, cylindrical shaped integral decorative LED bollard with aluminium housing with opal acrylic diffuser and IP 65 with all accessories includingn PCC foundation tapper plug, bolts, nuts, screws etc and upto 1000 mm height complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs LED flood light fitting 250 Watt of efficiency not less than 110 lumin/watt, energy saving and enviromental friendly light fitting IP 66 high power including lamp with pressure die cast aluminium housing with all accessories complete all as specified and directed by Engr-in-charge.

Supply & Fixing for Rigid non-metallic PVC conduit 20mm dia with complete of all tees, bends,elbows, reducers, mouth tube ends fixing accessories such as GI saddles, full threded screws and (Narayan) nylon rawl plugs etc surfaced on walls/roofs all as specified and as directed

Supply & Fixing in repair MCCB 4P 160 Amps,36 KA, thermal magnetic,415volts complete all as specified and directed.

Supply & Fixing in repair 50 Sqmm single core copper cable or main earthing lead fixed to wall with clamps or recess or croses or buried in ground or drawn in conduits/pipe or fixed to poles or any other indicated situation for loop earthing etc as required all as specified and directed by Engr-in-Charge.

Material & Labour for cleaning, refixing and testing of all loops for smoke cum heat detectors, beam detectors, hooters, response indicator, manual call points etc of existing make , checking and testing of electric wiring connection for each devices, re-numbering for each devices for programming in the AFDS panels with configuration of connected devices as per exact location of detectors indicating the same location in control panel and updating of software for AFDS panel of any make as per site requirement including testing in presence of user and JE/Engr in Charge complete all as specified and directed. Note : (i) Test report to be submitted after completion of job separately for each panel and cost of the same is deemed to be included in quoted rate. (ii) All devices connected with each AFDS Panel of any loop capacity as per existing for Loop testing, electric wiring testing, cleaning of all devices such as smoke cum thermal detectors, response indicators, manual call points, beam detector, flame detector etc, re-numbering of devices and its configuration and programming with AFDS panel incl software update is deemed to be considered as one job.

Supply and fix in repairs addressable Manual call point resettable type complete all as specified.

Supply and fix in repairs of hooter with control module complete all as specified and directed.

Supply and fix in repairs of 12 V 7 AH Battery for AFDS panel complete all as specified and directed.

Supply and fix in repairs of intelligent addressable monitor module complete all as specified and directed.

Supply & fix in repairs control module (HZM) item suitable for flame detectors complete all as specified and directed.

Supply, laying and connecting in repairs of PVC insulated PVC sheathed copper conductor cable of size 1.5 Sqmm 2 core FRLS 1100 volts grade drawn through existing MS/PVC conduit fixed on wall/celling of the Bldg complete all as specified.

Supply and fix in repairs photo electric smoke cum thermal detectors with mounting base complete all as specified.

Nilesh Construction (BID ID -3340395)

Shree Ayyappa Engineering (BID ID -3338039)

AGRAWAL ASSOCIATES (BID ID -3337974)

C S Sharma and Co (BID ID -3335647)