E Quotation For Proposed Development Modernization Face Uplift, Internal Re-arrangement, Waterproofing, Plumbing etc. Work for Existing Public User Building PUB at JNPA

Amount

CIVIL WORK

Providing and constructing 720mm wide Granite platform for toilet,wash basin counter as per Architects details. Vertical and Horizontal supports of kadappa stone with granite top and 75mm granite fascia as per architect detailed drawing and design including making provision for and fixing wash hand basin etc. complete with finishing/moulding & polishing .

Providing and laying China-Mosaic paving using atleast 50% coloured glazed tile chips, set in necessary cement bedding, including necessary wattas, channels ridges, valleys etc. complete all as per specifications and instructions complete, and cleaning with acids to remove all dirt and rendering the top surface clean.

Supply and Installation MS Grating, Size as per site requirement with 30mm x 30mm mesh and 30mm thickness. Material to be mild steel with hot-dip galvanized coating. Fabricated with welded joints and flanged edges.

PLUMBING WORK

Domestic & Flushing Transfer pump (1W+1SBY)

7.5 H.P, 3 phase 440V 50Hz 2900Rpm KSB make Open well Submersible pump with Copper rotar & S.S Shaft. Each pump capacity 450 L.P.M at 30 Mtr discharge head with 3 Mtrs Submersible power cable.

G.I Fabricated I.S.I “C” Class G.I Pipe/UPVC Sch-80 Pipe & Fittings For manifold with header for 2 Pump set. Including Branches pipe with fittings for each pump, Non-return valve, Butter fly valve with M.S Fabricated Flanges, nutt bolt, Warsher, Gasket & 65 m.m G.I main Header Etc.

32 m.m U-flow make S.S body with Weather proof 230V Solenoid Valve with coil. Water Level Controller Control of Solenoid Valve & Dry Run Protection with Floater Switch & Censor. Control Cable Etc.

Power & Control Cable from Panel to Pumps & Panel to Controls with Fittings. Approx. 25 Mtrs Each.

200 Ltrs Capacity Pre-Charged Diaghpram Pressure Tank

PRESSURE BOOSTER SYSTEM(DOMESTIC& FLUSHING)(1W+1SBY) Above Price For Pressure Booster System Dom+Flus Each Set 1set = 2 pumps

2 H. P, Single phase 230V/3 phase 440V 50Hz 2900Rpm KSB make Horizontal Multistage S.S Inline pump. Each pump capacity 150 L.P.M at 25 Mtr discharge head with 3 Mtrs Submersible power cable.

System mount with complete horizontal MS Fabricated many fold typemounting base stand with necessary 80mm G.I “C “class main suction header withstrainer 65 mm flanges GI pipe with 50 mm Butter fly valve50 mm branch pipe line with Butterfly valve, N.R.V & 65 m.m Discharge header with Ball Valve, Branches For Each Pumps.

300 Ltrs Capacity Pre-Charged Diaghpram tank with Fittings.

Float Switch (Censor) with lid Wire.

Pressure Switch, Pressure Gauge with Fittings.

Cables as Per Requirement for Power & Controls.

Removing the existing CI Pipeline from toilets of any Dia and stack spreading in the compound Storage and cleaning the site etc.complete.

Providing & Fixing of Zolotu Ball Valve 20mm Dia

Providing & Fixing of Zolotu Ball Valve 40mm Dia

Supply & Laying Pvc Pipe

200mm dia

160 mm dia

Construction Of Brick masonry Septic Tank with plaster inside and out side , internal surface neat cement finishing , internal drain channel making with Manhole Cover (Size 2500x1600 mm depth 2500)

Construction Of Brick masonry Soak pit for sewage with plaster inside and out side , internal surface neat cement finishing , internal drain channel making with Manhole Cover complete: (size 1200x1200mm depth 3m)

Construction Of Brick masonry Percolation Pit Drilling Bore insert perforated pvc pipe 160mm dia V Screen filter media with plaster inside and out side , internal surface neat cement finishing , internal drain channel making with Manhole Cover complete: (size 2mx2m depth 4.45m)

Supply and laying of the following RCC Hume pipe including road cutting, excavation to a depth of 750mm, back filling as required for cable entry including the cost of sealing the ends and making good as required and complete in all respects:

250 MM DIA RCC HUME PIPES

200 MM DIA RCC HUME PIPES

Supply, Installing , testing and commissioning of ARV Air Release Valve Including With Fittings Like , Brass Adopter complete: etc.

20mm dia

BOUGHT-OUTS

Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut out with 25mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30"Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed

Main Signages - Building Top:- 129 "Main Signages - Building Top Design, Composition, Supply & Installation of building facade LOGO & NAME"" for building facade, signage letters of Stainless Steel 304 graded 18swg laser sheet cut fabricated letters for text: as per requirement & design, with 25mm lipping in 22swg Stainless steel sheet 304, Polyurethane Coating (PU Coated) in colour specified, with concealed lighting behind the letters in White LED Modules of Samsung / Philips make in 0.72 watts, with requisite Power supply of Meanwell branded with 2 years warranty, along with Breaker and Legrand / L&T timer, to be mounted on Syntax junction box to be fixed near sign location; Power should be provided near sign locations; all wiring has to be concealed and should not be visible, all fixtures should be in Stainless Steel / aluminium, concealed behind the letters.

SOLAR SYSTEM

Supply , Installation , Testing and commissioning of 140 Kw Solar Grid -Tie system power plant with Net Metering (Panel & Invertor )

AMC FOR FOUR YEARS

Dismantalling Existing solar system (101kw)

Lifting and Reinstallation of Existing solar system (101kw) at terrace other location

accessaries and sparece as per requrements

ELECTRICAL WORK

Main LT Panel (Loc: Substaion Area)

Supplying, transporting to project site, installing and commissioning of floor mounted panel dust and vermin proof incorpoMtring the details as shown in the SLD.

350KVAR AHF Panel (Loc: Substaion Area)

Supplying, transporting to project site, installing and commissioning of floor mounted panel dust and vermin proof incorpoMtring the details as shown in the SLD.

HVAC PANEL

Supplying, transporting to project site, installing and commissioning of floor mounted panel dust and vermin proof incorpoMtring the details as shown in the SLD.

Main LT Floor Metering Panel (Loc: GF,FF,SF,TF)

Supplying, transporting to project site, installing and commissioning of floor mounted panel dust and vermin proof incorpoMtring the details as shown in the SLD.

UPS PANEL

Supplying, transporting to project site, installing and commissioning of floor mounted panel dust and vermin proof incorpoMtring the details as shown in the SLD.

STREET LIGHT PANEL

LIGHTING DB (COMMON AREA)

Supplying, transporting to project site, installing and commissioning of wall mounted double door DB with IP-43 dust and vermin proof incorpoMtring the details as shown in the SLD . ( 12 WAY TPN D.B.) (Make- Legrand or equivalent ) I/C : 40A, 4P,10KA, MCB I/C : 25A, DP, ELCB (100mA)- 3 NOs OUTGOING : 10A,SP,10KA, MCB - 24 NOs.

EMERGENCY LIGHTING DB (COMMON AREA)

Supplying, transporting to project site, installing and commissioning of wall mounted double door DB with IP-43 dust and vermin proof incorpoMtring the details as shown in the SLD . ( 6 WAY TPN D.B.) (Make- Legrand or equivalent ) I/C : 32A, 4P,10KA, MCB I/C : 25A, DP, ELCB (100mA)- 3 NOs OUTGOING : 10A,SP,10KA, MCB - 12 NOs.

POWER DB (COMMON AREA)

Supplying, transporting to project site, installing and commissioning of wall mounted double door DB with IP-43 dust and vermin proof incorpoMtring the details as shown in the SLD . ( 12 WAY TPN D.B.) (Make- Legrand or equivalent ) I/C : 40A, 4P,10KA, MCB I/C : 25A, DP, ELCB (100mA)- 3 NOs OUTGOING : 10A,SP,10KA, MCB - 24 NOs.

HVAC IDU DB (COMMON AREA)

Supplying, transporting to project site, installing and commissioning of wall mounted double door DB with IP-43 dust and vermin proof incorpoMtring the details as shown in the SLD . ( 12 WAY TPN D.B.) (Make- Legrand or equivalent ) I/C : 40A, 4P,10KA, MCB I/C : 25A, DP, ELCB (100mA)- 3 NOs OUTGOING : 10A,SP,10KA, MCB - 24 NOs.

UPS POWER DB

Supplying, transporting to project site, installing and commissioning of wall mounted double door DB with IP-43 dust and vermin proof incorpoMtring the details as shown in the SLD . ( 12 WAY TPN D.B.) (Make- Legrand or equivalent ) I/C : 32A, 4P,10KA, MCB I/C : 25A, DP, ELCB (100mA)- 3 NOs OUTGOING : 10A,SP,10KA, MCB - 24 NOs.

Supplying, transporting to project site, installing and commissioning of 40/63A, FP, MCB+ELCB (100mA),10 KA in IP65 enclosure.(Make- Legrand or equivalent )

INDUSTRIAL SOCKET

SITC of 3-Ph Power 25/32A, 5Pin, Socket & Plug (3P+N+E) - 1no; 25/32A, TP MCB+ELCB (100mA) - 1no etc complete mounted in IP65 Box. Plug & Socket must be of IP65 Type. (Make- Legrand or equivalent )

SITC of 3-Ph Power 40/63A, 5Pin, Socket & Plug (3P+N+E) - 1no; 40/63A, TP MCB+ELCB (100mA) - 1no etc complete mounted in IP65 Box. Plug & Socket must be of IP65 Type. (Make- Legrand or equivalent )

1010 KVA DG Set (CPCB-IV+ )

Providing, installing, testing and commissioning of silent type Diesel GeneMtring set (CPCB-IV+ )of capacity 1010 KVA at 1500 RPM, 0.8 lagging power factor at 415 Volts suitable for 50 Hz, 3 phase system (Make-Caterpillar, Powerica, Kirloskar ) Details spectifications are given in Technical spectifications.

Supplying, transporting to project site, installing and commissioning of AMF panel for Baove DG Set

EXHAUST SYSTEM

Supply installation testing commissioning of Exhaust piping with class- B, MS pipe (Confirming to IS specification) from DG set including the cost, flexible joints, bands, pipe support along with the wall and above terrace label suitable for 1000 KVA DG sets manufacture, recommendation, exhaust etc. complete as per specification as per required or as per direction of engineer in charge.

M Stack ( 1.5 mtr x 1.5 mtr x 30 mtr ) with 1 Coat of Red Oxide (Make - Jindal / Tata/ Appolo/ Sail) or as per Approved From Engineer Incharge.

Supply & Erection of 350 mm dia x 5 mm thick ‘B’ class M S Exhaust piping duly painted & with flanges, bends & other hardware

Supply & Erection of 200 mm dia x 5 mm thick ‘B’ class M S Exhaust piping duly painted & with flanges, bends & other hardware

Fabrication of Y Section of Exhaust piping of 200 mm pipe x 2 inlet and 350 mm outlet

Aluminium Cladding for exhaust piping 350 mm dia 50 mm Thick Rock wool with 48 kg/m3 Density with 24 swg AL sheet

Aluminium Cladding for exhaust piping 200 mm dia 50 mm Thick Rock wool with 48 kg/m3 Density with 24 swg AL sheet

Aluminium Cladding for ‘Y’ Section Exhaust pipe 50 mm Thick Rock wool with 48 kg/m3 Density with 24 swg AL sheet

350 mm Elbow class C

Aluminium Cladding for Silencer 50 mm Thick Rock wool with 48 kg/m3 Density with 24 swg AL sheet

Aviation Light double dome with LED Lamps ( Rs. 10,000) with 3C x 2.5 sq.mm CU Armoured cable – 50 mtr x Rs. 225 (Rs.11,250)

Copper Lightening Arrestor (Rs. 7,500) with G I Strip 25 x 3 mm (50 mtr x 200 = Rs. 10,000)

Stack Unloading & Shifting by crane

Stack Erection by 150 Ton crane supported by 14 ton crane

Stack design & Foundation design

Check point ( Cleaning Port ) & Carbon Point ( Pollution Inspection Port )

350 mm Exhaust Bellows made of 3 ply Stainless Steel with marching flanges of ‘E’ table, gasket and hardware

Electrical Inspector Permission & RegistMtrion

Scaffolding Charge

EndTermination:Supplying and making end terminal joints to the following 1.1 KV grade PVC insulated armoured overall sheathed copper / aluminium conductor XLPE cables, using nickle plated cable glands, copper compression type cable sockets , PVC insulating tapes, etc.:

3.5C X 300 Sqmm. A2XFY Cable

3.5C X 240 Sqmm. A2XFY Cable

3.5C X 185 Sqmm. A2XFY Cable

3.5C X 120 Sqmm. A2XFY Cable

3.5C X 95 Sqmm. A2XFY Cable

3.5C X 70 Sqmm. A2XFY Cable

3.5C X 50 Sqmm. A2XFY Cable

3.5C X 35 Sqmm. A2XFY Cable

4C X 1.5 Sqmm. YY Cable

1C X 25 Sqmm. YY Cable

Trunking & Cable Tray. Supply Installation Testing Commissioning of MS Powder Coated (as mentioned in each otem description), PerfoMtred/Ladder 2mm Thk Trays with coupler Plates with Plated Nut Bolts for Tray Connection, PVC Gaskets at each bend & branching on which cables passes to avoid cutting of cables . Including Manufactured bends, Tees, Reducers as required. Mtre to be quoted with erection on provided supports as supply & erection of supports is considered sepeMtrely.But GI Hardwarefor fixing cable trays to be inculded. Including supply & erection of Rubber Pads between cable tray & supports along with green passivated GI plated nut bolts for connetion.

600X100 mm GI PerfoMtred Cable Tray

Supply Installation Testing Commissioning of MS Powder Coated (as mentioned in each otem description), PerfoMtred/Ladder 2mm Thk Trays with coupler Plates with Plated Nut Bolts for Tray Connection, PVC Gaskets at each bend & branching on which cables passes to avoid cutting of cables . Including Manufactured bends, Tees, Reducers as required. Mtre to be quoted with erection on provided supports as supply & erection of supports is considered sepeMtrely.But GI Hardwarefor fixing cable trays to be inculded. Including supply & erection of Rubber Pads between cable tray & supports along with green passivated GI plated nut bolts for connetion.

600X50 mm GI PerfoMtred Cable Tray Cover

Supply and Installation of tie rod of 10 mm full threaded type with slotted channel as required for mounting of cable tray.Note- 1set include two nos of vertical rod and one horizontal slotted channel complete with anchoring in the ceiling. (For cable Tray support)

Supply,Installation,Testing & commissioning of, 6M Height Garden Pole.

Supply & installation 6/16A 3 pin top for AC machine

Supply & installation of HVAC outdoor stand for RCBO & Socket fixing

Dismantling of existing Armoured and Flexible cables of all types and size up to 10 sq. mm.

Dismantling of existing Fire cables.

Dismantling of existing Cat-6,Tel,Camera cables.

Dismantling of existing Fiber Optic cables.

Dismantling the existing W.T.fluoroscent fitting / S.V./ M.V/MH.lamp /LED fitting from wall with brackets and making the site as origina lcomplete.(All type of lights)

Dismantling the existing Switch Plate,Data Accss,Fire Accessories,Camera accessories.

Dismantling the existing DB and Network Rack

Dismantling the existing PVC Trunking/Conduit.

Dismantling the existing Panel

FIRE FIGHTING WORK

S/I/T/C of Electric Motor Driven Fire Pump set of 2280 LPM @ 70 m head, with Bronze Impeller, Motor, Coupling, Base Plate and foundation bolts matching flanges with gasket and fastners wth all complete.

S/I/T/C of Diesel Engine Driven Fire Pump set of 2280 LPM @ 70 Mtr head with Bronze Impeller, Engine, Base plate, coupling with coupling guard, foundation bolts, automatic air release valve, fuel tank with engine exhaust line silencer, matching flanges with gasket and fastners and battery with battery charger including 100% standby

S/I/T/C of Electric Motor Driven Jockey Fire Pump set of 280 LPM & 70 Mrs. Head with Bronze Impeller, Motor, Base Plate, foundation bolts and matching flanges with gasket and fastners.

S/I/T/C of Electric Driven Booster Pump of cast iron body and Bronze Impeller with stainless steel shaft, mechanical seal and floor of 900 LPM & 35 m conforming to IS:5120 suitable HP, SQ cage induction motor suitable for opeMtrion on 415 Volts.

S/I/T/C of Diesel Engine Starter Control Panel Solid-State, as per Spec. Wall mounted type for the Auto & Manual OpeMtrions of the Pump set, etc, along with the Battery Charger Power & Control Cabling from the Engine to Control Panel with Earthing & Inter-locking, having, Fuses AC / DC type, P.L.C. Based, Switches, Meters, Audio / Visual Alarms and Indicating Lamps, with Analogue Solid State Designs, with 3 Cold Impulses Starter for Deisel Engine of Standby Pumpset with Sequential OpeMtrion Circuitries.

SITC of Pressure Gauges with Syphon Tube and Cock 150mm Dial Range - 0 to 1kg /cm2.

SITC of Pressure Switches with Tubing, Control Cabling upto Panel, complete.

SITC of MS ERW Piping as per IS : 1239,part-I, heavy grade up to 150 NB and IS:3589, 6.35 mm thickness, including pipe fittings ,flanges, pipe supports such as c clamps, threaded rods, fastners.

200 mm NB 'C' Class

150 mm NB 'C' Class

100 mm NB 'C' Class

80 mm NB 'C' Class

Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

25 mm NB 'C' Class

SITC of Non Return Valves Dual plate with Matching Flanges, bronze internal, EPDM seat, 200 psi Mtring, suitable horizontal & vertical installation. 65 mm NB

SITC of Air Vessel Tank 300 NB x 1.2 mtrs.

SITC of 150 NB Four way Fire Brigade Inlet Connection having inbuilt non. return valve with 04 nos. of 63 mm GM instantaneous inlets for fire water tank.

Cabling from motor to Starter with copper earthling Strip within the pump house

Hydrant System

SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick & IS 1239 / II 'C' Class, with fittings IS 1239/II heavy grade including MS plate fabricated flange to ASA 150 LBS Mtring with accessories plus consumable for Underground pipes protection with by coating & wrapping with anticrrosive tape complete with required structural support if any as per spec

150 mm NB 'C' Class

100 mm NB 'C' Class

80 mm NB ‘C’ Class

SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- 'C' Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MS Plate Fabricated Flanges to IS / DIN / ASA 150 LBS Mtring & Aboveground Pipe Protection (Painting)and all required 'supports etc.

150 mm NB 'C' Class

100 mm NB 'C' Class

80 mm NB ‘C’ Class

SITC of oblique type stainless steel single headed hydrant valve with 63mm female instantaneous outlet angled towards ground as per IS 5290-Type A, including matching flanges ,bolts ,studs, nuts, washers, gaskets.

External

Internal

SITC of stainless steel body Orifice plate of suitable inner bore along with matching flange.

SITC of M. S. Hose Box of size 750 x 600 x 250mm-16swg thick fire red color from outside & white enamal from inside - front glass paited with " fire " with key, handle and brass hinges -to accommodate 2 nos of 15mtrs long hose and 1 branch pipe.

External

Internal

SITC of 63mm dia stainless steel universal branch pipe as per IS 2871

SITC of Fire fighting hose as per IS 14933 ( Type -A) . The fire hose shall be 15 mtrs long with 63mm dia stainless steel couplings at both end

15 m Long

SITC of 150NB Four way Siamese Connection for hydrant network with 4 nos. of 63 mm instantaneous inlets in glass fronted wall box having inbuilt non return valve and 150mm BFV with fittings, nut, bolts & washers.

SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- 'C' Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MS Plate Fabricated Flanges to IS / DIN / ASA 150 LBS Mtring & Aboveground Pipe Protection (Painting)and all required 'supports etc.

80 mm NB ‘C’ Class

65 mm NB ‘C’ Class

40 mm NB ‘C’ Class

32 mm NB ‘C’ Class

25 mm NB ‘C’ Class

SITC of Water flow switch of 80 mm

FIRE EXTINGUISHER VENDOR TO WORKOUT QUANTITIES

Clean gas Agent ( NAF P IV )

Dismantling Work

Dismantling of Electric Motor Driven Fire Pump set of 2280 LPM@70 m head,

Dismantling of Diesel Engine Driven Fire Pump set of 2280 LPM@70 m head,

Dismantling of Electric Motor Driven Jockey Fire Pump set of 2280 LPM@70 m head,

Dismantling of Electric Driven Booster Pump.

Dismantling of Diesel Engine Starter Control Panel

Dismantling of Pressure Gauges

Dismantling of Pressure Switch

Dismantling of MS ERW Piping

200 mm NB 'C' Class

150 mm NB 'C' Class

100 mm NB 'C' Class

80 mm NB 'C' Class

65 mm NB 'C' Class

50 mm NB 'C' Class

40 mm NB 'C' Class

32 mm NB 'C' Class

25 mm NB 'C' Class

Dismantling of double flanged, gate valve

Dismantling of Non Return valve

Dismantling of Air Vessel Tank 300 NB x 1.2 mtrs.

Dismantling of Ball valve

Dismantling of 150 NB Four way Fire Brigade Inlet Connection.

Dismantling of 25 NB Air Release Valve

Dismantling of Structural Steel Support

Dismantling of Cabling from motor to Starter with copper earthling Strip within the pump house

200 NB Y type Strainer

100 NB Y type Strainer

Dismantling of Hydrant System

Dismantling of double flanged wafer type lever opeMtred / wheel opeMtred butterfly valve of 200 psi Mtring including matchine flanges, bolts/studs, nuts, washers & gaskets.

Dismantling of oblique type stainless steel single headed hydrant valve with 63mm female instantaneous outlet angled towards ground as per IS 5290-Type A, including matching flanges, bolts, studs, nuts, washers, gasketes.

External

Internal

Dismantling of stainless steel body orifice plate of suitable inner bore along with matching flange

Dismantling of M.S. Hose Box of size 750 x 600 x250mm- 16swg thick fire red color from outside & white enamal from inside - front glass paited with " fire " with key, handle and brass hinges -to accommodate2 nos of 15mtrs long hose and 1 branch Pipe

External

Internal

Dismantling of 63mm dia stainless steel universal branch pipe as per IS 2871

Dismantling of fire fighting hose as per IS 14933 (Type-A). The fire hose shall be 15 mtrs long with 63mm dia stainless Steel couplings at both end

15 m long

Dismantling of GM air release valve.

Dismantaling of swinging type M.S. Hose Reel Drum

Dismantaling of Ball Valve 25NB

Dismantaling of 150NB Four way Siamese Connection

Structural Steel Support

Dismantling of Sprinkler System

Dismantaling of Standard response pendent type Brass sprinklers

Dismantaling of Standard response Upright type Brass sprinklers

SS Flexible Drop 1500mm/1200mm Length

Dismantaling of Cast Iron Wet Alarm Control valve, 150mm

Dismantling of double flanged wafer type Butter fly valve 150mm

Dismantling of Water flow switch of 80mm

Dismantling of Ball Valve 25NB

Dismantling of Fire Extinguisher

Clean Gas Agent (NAF P IV)

CO2 fire extinguishers 4.5 kg

Fire Buckets Set (04 Buckets in one set)

FIRE ALARM SYSTEM

S/I/T/C of 04 Loop Addressable Fire Control Panel, Make Honeywell Morley UL Approved,

S/I/T/C of Repeater Panel Make Honeywell Morley UL Approved

S/I/T/C of Addressable Multisensor/ Photoelectric Detector with mounting base Make Honeywell Morley

S/I/T/C of Addressable Heat Detector Make Honeywell Morley UL Approved

S/I/T/C of Addressable Manual Call Point.

S/I/T/C of Addressable Relay Out Put Module

S/I/T/C of Addressable Isolator Module

S/I/T/C of Addressable Module

S/I/T/C of Addressable Stob Light Hooter

S/I/T/C of Addressable Control Module.

S/I/T/C of Addressable Response Indicator.

Supply and Laying 2 Core x 1.5 sq. mm Polycab Make, Copper Armored Cable.

HVAC SYSTEM

HIGHSIDE EQUIPMENTS

VRF Outdoor units

Supply of inverter /Digital scroll compressor with Variable refrigerant system connectable to multiple indoor units. Outdoor unit shall be factory assembled weather proof casing constructed from heavy gauge mild steel panels. The unit shall be completely factory wired and tested with necessary controls and charged with refrigerant. The compressor shall be highly efficient scroll type. The aluminium fins shall be covered with anti-corrosion resin. Unit shall be equipped with oil recovery system to ensure stable operation with long refrigerant piping. Units shall be tested and commissioned with additional refrigerant.

36HP ( 18HP+18HP)+(18H) - (2W+1SB) - FOR PASSAGE-GR, 1ST, 2ND & 3RD FLOOR

54HP ( 18HP+18HP+18HP)+(18HP)-(3W+1SB) - SHOPS STAIRCASE SIDE-GR, 1ST, 2ND & 3RD FLOOR

44HP ( 22HP+22HP)+(22HP)-(2W+1SB) - SHOPS TOILET SIDE E-GR, 1ST, 2ND & 3RD FLOOR

44HP ( 22HP+22HP)+(22HP)-(2W+1SB) - LHS FROM BLDG. ENTRY -GR, 1ST, 2ND & 3RD FLOOR

44HP ( 22HP+22HP)+(22HP)-(2W+1SB) - RHS FROM BLDG. ENTRY -GR, 1ST, 2ND & 3RD FLOOR

VRF Indoor units

CEILING MOUNTED COMPACT CASSETTE with wireless remote controller

1.6TR FOR Passage Area

Refnut Joints

Supply of Variable refrigerant flow distribution REFNUTS / T Joints (pair) in the suction & Liquid lines for various sizes of copper refrigerant piping including insulation etc. as required.

Supply of Variable refrigerant flow distribution REFNUTS / T Joints (pair) in the suction & Liquid lines for various sizes of copper refrigerant piping including insulation etc. as required. (PROVISION FOR SHOPS)

Supply, Installation, Testing & Commissioning of Energy Manaeger CRC

Supply, Installation, Testing & Commissioning of Realay

VRF Indoor units

CEILING MOUNTED COMPACT CASSETTE Kit with wireless remote controller

1.6TR FOR Passage Area

LOW SIDE INSTALLATION

VRF (Cooling only) INDOOR UNIT & OUTDOOR UNITS

Installation, Testing & Commissioning of inverter /Digital scroll compressor with Variable refrigerant system connectable to multiple indoor units. Outdoor unit shall be Including rubber pads for outdoor units etc.

36HP ( 18HP+18HP)+(18H) - (2W+1SB) - FOR PASSAGE-GR, 1ST, 2ND & 3RD FLOOR

54HP ( 18HP+18HP+18HP)+(18HP)-(3W+1SB) - SHOPS STAIRCASE SIDE-GR, 1ST, 2ND & 3RD FLOOR

44HP ( 22HP+22HP)+(22HP)-(2W+1SB) - SHOPS TOILET SIDE E-GR, 1ST, 2ND & 3RD FLOOR

44HP ( 22HP+22HP)+(22HP)-(2W+1SB) - LHS FROM BLDG. ENTRY -GR, 1ST, 2ND & 3RD FLOOR

44HP ( 22HP+22HP)+(22HP)-(2W+1SB) - RHS FROM BLDG. ENTRY -GR, 1ST, 2ND & 3RD FLOOR

VRF Indoor units

installation of CEILING MOUNTED COMPACT CASSETTE with wireless remote controller

1.6TR FOR Passage Area

Pressure testing and Refrigerant Gas charging between indoor & outdoor units.

36HP ( 18HP+18HP)+(18H) - (2W+1SB) - FOR PASSAGE-GR, 1ST, 2ND & 3RD FLOOR

54HP ( 18HP+18HP+18HP)+(18HP)-(3W+1SB) - SHOPS STAIRCASE SIDE-GR, 1ST, 2ND & 3RD FLOOR

44HP ( 22HP+22HP)+(22HP)-(2W+1SB) - SHOPS TOILET SIDE E-GR, 1ST, 2ND & 3RD FLOOR

44HP ( 22HP+22HP)+(22HP)-(2W+1SB) - LHS FROM BLDG. ENTRY -GR, 1ST, 2ND & 3RD FLOOR

44HP ( 22HP+22HP)+(22HP)-(2W+1SB) - RHS FROM BLDG. ENTRY -GR, 1ST, 2ND & 3RD FLOOR

Outdoor Units Stand

Fabrication and installation of MS base frame for outdoor units complete with epoxy painting, vibration isolation pads, supports, hangers, brackets etc.

36HP ( 18HP+18HP)+(18H) - (2W+1SB) - FOR PASSAGE-GR, 1ST, 2ND & 3RD FLOOR

54HP ( 18HP+18HP+18HP)+(18HP)-(3W+1SB) - SHOPS STAIRCASE SIDE-GR, 1ST, 2ND & 3RD FLOOR

44HP ( 22HP+22HP)+(22HP)-(2W+1SB) - SHOPS TOILET SIDE E-GR, 1ST, 2ND & 3RD FLOOR

44HP ( 22HP+22HP)+(22HP)-(2W+1SB) - LHS FROM BLDG. ENTRY -GR, 1ST, 2ND & 3RD FLOOR

44HP ( 22HP+22HP)+(22HP)-(2W+1SB) - RHS FROM BLDG. ENTRY -GR, 1ST, 2ND & 3RD FLOOR

Supply and Installation of 18G Copper Piping insulated with19mm thick elastomeric nitrile rubber insulation and finished with polyshield coating with Necessary fittings, Y Joints and headers. All piping inside the room shall be properly supported with hanger and all external piping shall run in covered cably tray.

Supply and Installation of 18G Copper Piping insulated with19mm thick elastomeric nitrile rubber insulation and finished with polyshield coating with Necessary fittings, Y Joints and headers. All piping inside the room shall be properly supported with hanger and all external piping shall run in covered cably tray. (PROVISION FOR SHOPS)

Supply & Installation of Shut-off valve between refrigerant copper piping to each shop for future expansion.

Copper Cable

Supply Installation & Testing of Control Cabling from indoor to outdoor unit.

Supply, Installation & Testing of power cabling from Indoor unit to supply point with Flexible copper cable

2 C x 1.5Sqmm

4 C x 2.5Sqmm

4C x 10Sqmm copper Armoured cable for Outdoor unit supply

2 C x 1.5Sqmm - (provison for shops)

Drain Pipe

Supply and Installation of PVC Drain piping with 6mm thick closed cell nitrile rubber tubular Installation with Necessary supports, screws, etc. Required u trap for all machines.

25mm Dia

32mm Dia

40mm Dia

Sheet Metal Works - (Exhaust Air & Fresh Air)

Supply, installation of sheet metal RECTANGULAR DUCTS complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts & nuts, etc.

24 gauge (0.60mm)

22 gauge (0.80mm)

Supply & Installation of Insulated Flexible duct for Supply air with supporting arrangemnt etc.

150 - mm Dia

100 - mm Dia

Toilet Ventilation Fan - In-line Fan cabinet / circular type

Supply, installation, testing, and commissioning of in-line fans comprising of Class I construction complete with TEFC induction motor

500cfm / 10mm SP - Gents Tolet Exhaust - GR, 1ST, 2ND & 3RD FLOOR

300cfm / 10mm SP - Ladies Tolet Exhaust - GR, 1ST, 2ND & 3RD FLOOR

Stair Case Ventilation Fan - In-line Fan cabinet / circular type

2000cfm / 25mm SP - GR, 1ST, 2ND & 3RD FLOOR

Air Distribution

Supply & fixing of Extruded Aluminimum powder coated Supply & Return air grills with necessary GI Screw, bolt, nut & supports.

Supply & fixing of Collar Dampers of opposed blade type made out of Aluminium alloy extrusion with anodised matt black finish

Supply and fixing of multiblade Opposed type Volume control damper constructed out of 18G GI damper with suitable links,and nylon bearings with quadrants and levers for manual control of volume flow of air for proper distribution and balancing of the system with lever locking facility, including necessary GI Bolt, nuts & washers.

Supply, Installation, Testing and Commissioning of Fire damper with fusible link with limit switch and indicator to show the open/close position). The blades and frame shall be of minimum 16 G thickness and fire damper shall be of atleast 1-1/2 or 2 hour fire rated as per UL555/1995 tested by CBRI. Fire damper fusible link type.

Supply & Installation of - Aluminimum powder coated EXHAUST air grille 150 x150mm/ Disk Valve

Supply & Installation of Non Insulated Flexible duct for Exhasut air with supporting arrangemnt etc.

100 - mm Dia

Supply , installation,testing and commissioning of Fire retardent canvass connection to connect Fan mouth and duct with necassy supports and fittings,

Supply & Installation of GI cable tray to protect the exposed refrigerant pipes

Cable tray with cover (300 mm x 75 mm)

Cable tray with cover (450 mm x 75 mm)

Cable tray with cover (150 mm x 75 mm)

Supply , installation of Out Door Unit Cowl Piece.

Recommissioning Of each system (As per Shop )

2nd Year After Completion of Defectliability Period.

3rd Year After Completion of Defectliability Period.

4th Year After Completion of Defectliability Period.

5th Year After Completion of Defectliability Period.

Supply, Installation, Testing & Commissioning of NVR 32 CH with 80TB Storage

Supply, Installation, Testing & Commissioning of 8 Port PoE Switch with 2 SFP Ports (Industrial Grade)

Supply, Installation, Testing & Commissioning of 9 U Rack

Supply, Installation, Testing & Commissioning of 3 KVA Online UPS with 16 nos 12v, 42Ah Battery with rack and accessories

Supply, Installation, Testing & Commissioning of 49" LED Professional Monitor

Supply, Installation, Testing & Commissioning of Security Signage

Supply, Installation, Testing & Commissioning of Core 3 Switch with 4 Nos fiber modules Fully loaded

Supply Laying and installation of Armourd Single mode OFC 12 Core with laying charges

Supply, Installation, Testing & Commissioning of Armoured CAT-6 Cable

Supply, Installation, Testing & Commissioning of Power Cable 3 C x 2.5 Sq. mm Armoured

Supply, Installation, Testing & Commissioning of 4K HDMI Cable 10 Meter length

Supply, Installation, Testing & Commissioning of 40mm HDPE pipe

Providing & fixing Cat 6 IO camera & rack side

Providing & fixing 24 port jack panel unloaded for outdoor rack ( Make-D-Link)

Providing & fixing SFP Transceivers oudoor switch & building switch

Providing & fixing 1000Base-T Copper SFP Transceiver (PC & NVR)

10 Passenger/680 Kgs – 04 Stops – 1 MPS Machine Room Type Elevator (Anti-nuisance Car Call Protection Independent Service (for Duplex only) Overload Device Nudging Emergency Car Light Unit Infrared Curtain Door Protection Door Time Protection Emergency Alarm Button Extra Door Time of Lobby & Parking Door Open/Close Button Manual Rescue Operation Belt Inspection Drive Auto Fan Cut Off)

Dismentaling of Existing Lift Cabin, Lift Track, Motor Drive & all accesaries.

TEMP. ARRANGEMENT OF EXISTING OFFICE.

Temp arragement of Existing staff of Multiple Locations

Shandar Interior Pvt. Ltd.

Tathastu Infrastructure