PROVN OF 01 X TOILET, WASHING POINT, STORE ROOM, SOLAR WATER HEATER AND CERTAIN MINOR WORKS UNDER AGE BR II AND AGE EM OF GE BENGDUBI MIL STN

Amount

Excavation in trenches in soft/loose soil not exc 1.5 m wide and not exc 1.5m in depth and getting out complete all as specified and directed.

Removing excavated material n. exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25 cm thick in soft/loose soil complete all as specified and directed.

M&L hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L for sand filling under floors in layer n exc 25 cm thick or in foundations including watering and consolidation complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded aggregates as in foundation filling and mass concrete as in lean concrete complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for 75mm thick P.C.C 1:3:6, type C-2, using 40mm graded stone aggregate as in sub base of floor and plinth protection complete all as specified and directed.

M&L for 40mm thick P.C.C 1:2:4 type B-1, using 20mm graded stone aggregate as in flooring and finishing cement concrete surface even and smooth without using extra cement complete all as secified and directed.

M&L for use and waste of formwork in rough finished surface to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams etc complete all as specified and directed.

M&L for use and waste of formwork in rough finished surface to sides of pillars, posts, struts, piers, columns and stanchions etc complete all as specified and directed.

M&L for use and waste of formwork in rough finished surface to roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc complete all as specified and directed.

M&L for use and waste of formwork in rough finished surface to chullah hoods, chajjas, troughs and similar items including edges etc complete all as specified and directed.

M&L for use and waste of formwork in rough finished surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick etc complete all as specified and directed.

M&L for M25 design Mix R.C.C work using 20 mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.

M&L for M25 design Mix R.C.C work using 20 mm graded aggregate as in Columns, pillars, piers, posts etc complete all as specified and directed.

M&L for M25 design Mix R.C.C work using 20 mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed.

M&L for M25 design Mix R.C.C work using 20 mm graded aggregate as in Chajja etc complete all as specified and directed.

M&L for M25 design Mix R.C.C work using 20 mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No-21 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

S&F for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe-410-Wgde -E-250) quality 'B' includng welding or riveting etc complete all as specified and as directed

M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410- W(Gde E-250) quality-B complete all as specified and directed.

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5cm and n exc 30cm long and dia of neck from 11 mm to 15 mm complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled Galvalume / Zincalume sheet with min thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, AI Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws colour/exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron poyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self tapping fastener (12-14 x 55 with EPDM seals) etc complete all as specified and directed.

S&F Pre-painted coloured plain profiled Galvalume / Zincalume sheet with min thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, AI Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof ridge colour/exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron poyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self tapping fastener (12-14 x 55 with EPDM seals) etc complete all as specified and directed.

S&F Gl frame work size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the termediate channel at 457 mm centre to centre complete all as specified and directed.

S&F 4 mm thick designed Non asbestos fiber cement building boards, fixed or laid /inserted to timber /GI /Aluminium frame-work with screws complete all as specified and directed.

M&L MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc complete all as specified and directed

M&L for 1.25mm thick pressed steel door frame of size 165mm x 60mm with one or more rebates including necessary fixing lugs , hinges, lock strike plate etc. complete all as specified and directed.

S&F 35mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton factory made shutter open rebated and prepared to receive glass, gause etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and directed.

S&F aluminium anodised tower bolt 100 mm long of extruded section etc complete all as specified and directed.

S&F 100 mm stainless steel butt hinges, medium weight, cold rolled, complete all as specified and directed.

S&F aluminium handles, 150 mm size, cast type anodized complete all as specified and directed.

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc. complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel complete all as secified and as directed

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as secified and as directed

All as per item No-40 above but without glazing bars ( for mosquito proof shutter )

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortal (1.4) mixed with water proof compound for external brick surface complete all as secified and as directed. Note:-Water proofing compound shall be measured and paid separately under respective item of this schedule

M&L for rendering 15 mm thick other than fair faces of brick work or concrete surfaces in cement mortal (1.6) for internal brick surface complete all as secified and directed.

Supply only liquid water proofing compound.

M&L for newly plastered surface of wall appying two coat of white or tinted oil bound distemper over one coat of alkali resistant priming paint including one coat of wall care putty etc complete all as secified and directed.

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint over one coat of cement primer complete all as secified and directed.

M&L for preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer complete all as secified and directed.

M&L for preparation of new or previously untreated surfaces of wooden, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as secified and directed.

M&L for precast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in manhole cover/ cover slab including necessary form work set in cement mortar 1:4 complete all as specified and as directed

M&L for plain cement concrete 1:3:6, type C-2, using 40mm graded stone aggregate as in concrete bed including packing under & haunching against sides of bore pipes after the pipe are laid and tested for 150mm complete all as specified and directed.

M&L for SGSW pipes 150 mm dia grade 'A' laid in trenches and jointed complete all as specified and directed.

M&L for cutting salt-glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar 1:1 complete all as specified and directed.

S&F in repairs salt Glazed gully trap square or round mouthed 150X150mm, (type p or q or s )setting and jointing with solvent cement complete all as specified and as directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for Internal dia of pipe 150mm complete all as specified and as directed.

M&L for non-skid colour ceramic tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm as in floors set and jointed in cement slurry @ 3 Kg/Sqm and pointed in white or colour cement to match existing surfaces complete all as specified and directed.

M&L for glazed ceramic tiles of size 450mm x 300mm x 7mm thick coloured tiles on vertical surfaces set and jointed in neat cement slurry @ 3 Kg/Sqm and pointed in white or coloured cement to match the existing surface complete all as specified and directed.

M&L for screed bed or bedding layers of 15 mm thick cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L for rendering 10 mm thick cement mortar (1:4) to receive tiles in vertical surfaces complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as per specification & drawing given in SSR Part –II 2020 and complete all as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing given in SSR Part –II 2020 and complete all as directed.

S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S&F 4mm thick one side frosted glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and directed.

M&L for preparing newely plastered surface of wall and applying finishing walls with acrylic smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed.

M&L for preparing new plastered surface of walls and applying 2 coat of Birla/Asian wall care putty and two coat of oil bond distemper white or any tint over a coat of primer etc complete all as specified and directed

S&F Vitreous china squatting pattern water closet size 630x450 mm (Orrisa pattern )(excluding flushing cistern) including connection to outgoing pipe and and flushing pipe complete all as specified and directed.

S&F PVC valveless, syphonic action type, low level flushing cistern 10 Ltrs capacity with inlet, ball valve, float and handle including brackets (excluding flush/discharge pipe) complete all as specified and directed.

S&F Vitreous china squatting plate urinal, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urianl against floor in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F of 15 mm bore stop valves cast copper alloy screwed down high pressured with batterfly handle screwed both ends for iron pipes fancy type choromium plate (concealed type) complete all as specified and directed.

S&F in repairs for bib tap 15 mm bore fancy type chromioum plated with long shank & cup complete all as specified and directed.

S&F in repairs for bib tap two in one 15 mm bore fancy type chromioum plated with long shank & cup complete all as specified and directed.

S&F in repairs, 15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

S&F ball valves for bore dia of pipe 20mm, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) etc complete all as specified and as directed

Supply and laying of CPVC pipes 20 mm outer dia SDR-11 & plain CPVC SDR 11 fittings on wall /ceiling or laying in floor complete all as specified and as directed

Supply and laying of CPVC Pipes 25mm outer dia SDR-11 & plain CPVC SDR 11 fittings on wall /ceiling or laying in floor complete all as specified and as directed

Supply and laying of CPVC Pipes 32 mm outer dia SDR-11 & plain CPVC SDR 11 fittings on wall /ceiling or laying in floor complete all as specified and as directed

S&F CPVC brass elbow 20 mm dia SDR-11 on wall /ceiling or laying in floor complete all as specified and as directed

S&F CPVC brass elbow 25 mm dia SDR-11 on wall /ceiling or laying in floor complete all as specified and as directed.

S&F CPVC brass Tee 20 mm dia SDR-11 on wall /ceiling or laying in floor complete all as specified and as directed.

S&F CPVC brass male brass Adeptor(MTA/MBTA) 20 mm dia SDR-11 on wall /ceiling or laying in floor complete all as specified and as directed.

S&F CPVC Ball valve 20 mm dia SDR-11 on wall /ceiling or laying in floor complete all as specified and as directed

S&F CPVC Ball valve 32 mm dia SDR-11 on wall /ceiling or laying in floor complete all as specified and as directed

S&F CPVC tank adapter 32 mm dia SDR-11 on wall /ceiling or laying in floor complete all as specified and as directed.

S&F 110mm PVC (SWR) pipe as in drain single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.

S&F PVC(SWR) bend of any radius with oval access door including jointing with cement joints for (110 mm bore). complete all as specified and as directed.

S&F 110mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repair for 75 mm bore PVC soil, waste and vent pipes (spun pipes), in any length with or without ears fixed with cement joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and directed

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 110mm bore PVC (SWR) `P' or 'S' trape complete all as specified and directed.

S&F 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F grating doom 100mm dia of PTMT (minimum weightt 25 gm) for floor trap/nahani trap complete all as specified and directed.

S&F Vitreous china WHB 550x400mm size white flat back with brackets incl cutting or pinning ends of brackets (excluding waste pipe) complete all as specified and directed.

S&F of 15 mm bore pillar taps fancy type (long neck) cast copper alloy with capstan heads chromium plated screwed down high pressure with or without letter hot or cold with long screwed and shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S&F in repairs of 600 x 450 mm bevelled edge mirror of seleceted quality glass mounted on 6mm thick AC building board or ply board and fixed to wooden plug with CP brass screw and cup washer complete all as specified and directed.

S/F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.

S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed complete all as specified and directed.

M&L for 18 to 20mm thick machine cut, pre-polished Black Jet, premium quality, granite stone slab, in skirting, Kitchen platform, dado etc laid over and including 15mm thick cement mortar 1:4 screed bed, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with the shade of granite stone including rounding / moulding the edges half round complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over and including 20mm thick screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M&L for machine cot kota stone slab in riser of step,skirting, dado etc 18-20 mm thick over and including 10mm thick rendering in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exc 0.18 Sqm but n.exc 0.38 Sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with floor complete all as specified and directed.

All as per item No. 104 above here-in-before but on vertical surfaces such as dado/skirting complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Excavating in Post holes( or similar holes) each n exc 0.50 cum , getting out,returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ loose soil complete all as specified and directed.

M&L for PCC 1:3:6 type D2 using 40mm graded aggregates as in foundation filling and mass concrete as in lean concrete complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of hardstanding and ramp complete all as specified and directed.

M&L100 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone agg) and finish the concrete surface even and smooth without using extra cement as in hard standing, plinth protection and ramp complete all as specified and directed.

M & L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 confirming to Fe 410-W(Gde E- 250) quality A complete all as specified and directed.

M&L for 25 mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded stone aggregates) as in sub base of flooring complete all as specified and directed.

Providing and laying 80 mm thick factory made chamfered edge cement concrete paverblock of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paverblocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 Grade cement concrete in position to the requied level and curveture, jointed with cement mortar 1:3 (1 cement:3 coarse sand), including making joints with or without grooves ( thickness of joint at sharp curve shal not more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for precast cement concrete louvers and jali type B0 1:2:4( 12.5 MM graded aggregate) 35 mm thick( measured solid), including all moulding but excluding frame( precast frame shall be measured seperately complete all as specified and directed.

M&L for RCC1:2:4 type B1 using 20 mm graded aggregate as in as in beams, cantilevers, bressumerrs litel over 1.5 mtr span chamfered angles and throating, complete all as specified and directed.

S&F Vitreous china urinal bowl type half stall pattern ( back or corner wall type) comlplete including providing and fixing plugs, bedding urinal against wall in cement in cement mortar 1:2, securing urinal plug with and including 60 mm long brass screw, pointing around urinal to plug with back in cement complete all as specified and directed.

S&F rotational moulded PVC water storage tank 500 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc completge all as specified and directed.

S&F hard drawn steel wire fabric in available size weight not exc 4.00 Kg /sqm fixed in tank caging including welding, riveting, framing complete all as specified and as directed.

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20 mm iron pipe or for unions and fixed complete all as specified and as directed.

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm iron pipe or for unions and fixed complete all as specified and as directed.

S&F Ball brass float valves,high pressure, with polythene float and flynut complete, screwed for 20 mm bore iron pipe or brass ferrule and fixed complete all as specified and as directed.

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast complete all as specified and directed.

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and removing from site complete etc complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and directed.

All as per item No 130 above but 20 mm dia bore

All as per item No 130 above but 25 mm dia bore

Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

Taking down PVC rain water pipes ( any size or pattern) including all fittings head shoes complete all as specified and directed.

Dismantling water tanks exc 250 ltr but not exc 500 ltr and removing to store complete all as specified and directed.

M&L for screed bed or bedding layers of 15 mm thick cement mortar (1:4) for laying floor finishes complete all as specified and directed.

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor complete all as specifed and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting complete all as specified and directed.

S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast and filling of pressed steel chowkat ietc complete all as specified and directed.

S&F 25mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specifirf and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and as directed.

S&F Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F anodised aluminium window (sliding three track) and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such suitable handles etc complete all as specified and as directed. Note:- Glass and wire mesh shall be measured and paid separately under respective items.

S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n.exc 0.50 sqm in each pane complete all as specified and directed.

S&F 4mm thick sheet figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and directed.

S&F Aluminium anodised tower bolt 150 mm long of extruded section etc complete all as specified and as directed

S&F aluminium alloy, anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor

S&F bal catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved complete all as specified and directed.

S&F continous (piano) hinges, mild steel, bright finish or eletro galvanised with of flap (when opne) 30 mm etc complete all as specified and as direced

S&F in repair white vitreous china wash basin white flat back size 550x400 (Oval shape) excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed.

S&F in repairs coloured vitreous china wash down water closet European type (Pedestal Pattern) white (excluding flushing cistern & flush pipe) incl connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed CAT No CNS-WHT-551SN Make- JAQUAR or equivalent in Hindware/Cera as approved .

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed

S&F in repair 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, 15 mm dia 600 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

S&F in repairs 50mm Low density polyethylene (LDPE) pipes of pressure rating 6kgf/sq. cm etc complete all as specified and directed.

S&F in repair for 75 mm bore out let cast floor trap with gratings including jointing to waste pipe fixed in cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate complete all as specified and as directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and as directed

S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed.

All as per item No-161 above but 20 mm dia bore pipes

All as per item No-161 above but 25 mm dia bore pipes

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and as directed

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25 mm bore and fixed as in repair complete all as specified and as directed

S&F in repair for 75 mm bore Cast iron soil, waste and vent pipes (spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and directed.

S&F in repair for 100 mm bore Cast iron soil, waste and vent pipes(spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or vertically cast, complete all as specified and as directed

S&F 75mm bore cast iron Bends of (any radius), diminishing piecs or tapers (larger bore measured) complete all as specified and as directed

S&F 100 mm bore cast iron Bends of (any radius), diminishing piecs or tapers (larger bore measured) complete all as specified and as directed

M&L for rendering 10mm thick on concrete surfaces of ceiling/Chajja/Facia of chajja etc in cement morter 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:3) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed. Notes : WPC shall be measured and paid seperately

M&L for priming surface and applying normal treatment ( for moderate conditions ) using glass felt grade 2 fibre base bitumen etc complete all as per manufaturer instructions,specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. Not less than 150 gms/sqm) land on primed surface by torced application side overlaps shall be minimum 75mm and end laps shall be minimum 100mm and sealing all overlaps and joints as per manufacturer's instructions and provided upto a height of 60cm in the parapets by cutting a groove and finished by membrane flashing complete all as per manufaturer instructions,specified and as directed.

M&L for 20mm thick cement plaster in cement mortar 1:3 in mixed with Pidi Proof LW or Dr Fixit @ 200 ml per 50kg of cement and finished even and smooth surface without using extra cement as in sunken floor treatment etc complete all as specified and as directed Note:- WPC shall measured and paid saperately under respective item

Cutting holes into or through brick/stone masonry walls built in cement mortar and making good in cement mortar 1:3 or cemnt concrete 1:2:4 type B-1 as required superficial area exc 150 sqcm and not exc 400 sq cm etc complete all as specified and directed

M&L for preparing new plastered surface of ceiling surface and applying two coats of white wash complete all as specified and directed.

M&L preparing old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for complete removal of existing tratement of wall and appying two coat of colour wash over a coat of white wash complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coat Birla/Asian wall care Putty and two coat of oil bound distemper white or any tint over a coat of primer etc complete as specified and directed

M&L for preparing Old plastered surface of wall and applying two coat of cement base paint complete all as specified and directed

M&L preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F in stainless steel decorative curtain rod of 25 mm bore with wood finishes including brakets 02 nos finalie 02 nos) etc complete all as specified and as directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions eparately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for concealed point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface complete all as specified and directed for the followings: -

One light point/ Bell/ one fan point controlled by one switch

One 3 pin socket outlet, 5 Amp independent

One 3 pin socket outlet, 5 Amp on the same board with other switches

M&L for concealed point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of one 15 Amp switches-sockets outlet independent complete all as specified and directed .

S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amp complete all as specified and directed.

S&F Switch socket combination 2 in 1, 5 Amp flush type complete all as specified and directed.

S&F Switch socket combination 5 in 1,5A/16A, flush type complete all as specified and directed.

S&F Ceiling rose, 3 way PVC insulated body complete all as specified and directed.

S&F stepped type electronic fan regulator flush type (2-Module) complete all as specified and directed.

S&F LED tube light luminaries with high performance LED with driver 1 x 18/20W (4 Feet long, Cool day/Warm white) complete all as specified and directed. Make- Havells/Crompton/ Philips.

S&F LED tube light luminaries with high performance LED with driver 1 x 9/10W (4 Feet long, Cool day/Warm white) complete all as specified and directed. Make- Havells/Crompton/ Philips.

S&F lamp holder PVC/ Polycarbonate type with back plate suitable for B22 LED lamp including 9 watt LED bulb complete all as specified and directed. Make- Havells/Crompton/ Philips.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make- Havells/Crompton/ Philips.

S&F building security LED light luminaire fitting 1X20 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1.00 meter long bent to shape including bolt, nut,washer,clamps made out of MS flat of size 25X3 mm , 4 nos Anchor Bolt of suitable size complete all as specified and directed. Make-Havells/philips/cromptons.

S&F building security LED light luminaire fitting 1X25 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1.00 meter long bent to shape including bolt, nut,washer,clamps made out of MS flat of size 25X3 mm , 4 nos Anchor Bolt of suitable size complete all as specified and directed. Make-Havells/philips/cromptons.

Taking down old MCB DB/control box any type and size includind MCBs and seperating the serviceable MCBs complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door Single pole & Neutral 4 way with common bus bar at incomming end complete all as specified and directed. Make:Legrand/Havells/L&T/ABB.

S&F sheet metal enclosure for MCB DB double door Single pole & Neutral 8 way with common bus bar at incomming end complete all as specified and directed. Make:Legrand/Havells/L&T/ABB.

S&F MCB 'C' series Single pole and neutral 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. Make:Legrand/havells/L&T/ABB.

S&F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. Make:Legrand/havells/L&T/ABB.

Taking out old unserviceable / faulty cable of any size from trench/pole/on wall complete all as specified and directed.

Supplying laying and testing of XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 10 Sqmm 2 core laid in trench/pole/on wall complete all as specified and directed.

Supplying laying and testing of XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 16 Sqmm 2 core laid in trench/pole/on wall complete all as specified and directed.

Supplying laying and testing of XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 25 Sqmm 3.5 core laid in trench/pole/on wall complete all as specified and directed.

M&L for sand cushioning for protection of underground cable, consolidated and compacted with clean dry sand all as specified and as directed by the Engineer-in-Charge.

M&L for well burnt old size sub Class ‘B’ bricks, laid flat, in trenches for cable protection complete all as specified and directed.

M&L for 40mm dia GI pipe light grade with all necessary fittings laid in trenches, fixed to wall/pole/under road/floor etc for cable protection complete all as specified and directed.

M&L for earthing complete with galvanised earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground (earth pit not less than 2.25 mtr below normal ground level with top edge of the plate not less than 1.50 mtr below normal ground level connected to galvanised lead lead wire 4.0 mm dia by means of bolts, nuts and washers and check nuts of galvanised iron or steel GI earth strip protected by 40 mm medium grade galvanised iron pipe including of 20 mm dia medium grade GI water tubing sheet metal 4mm wire mash funnel, charcoal or coke and common salt in paint and testing on completion all as shown on electrical plate No.5 of SSR Part-I. including taking out unserviceable one and necessary earthwork complete all as specified and directed.

S&F of Air termination copper rod 300mm long including GI pipe (medium grade) 2.0 meter length by clamp 3 set of MS flat 35x6mm including anchor bolt 100mm long 6 Nos and all fixing accessories to fixed at the top of the bldg complete all as specified and directed.

S&F aluminum strip 25x3.15mm with saddles fixing scrcub etc for roof conductors down conductors above Ground complete all as specified and directed.

S&F G.I Strip 32 x 6mm burried in Ground, wall etc complete all as specified and directed.

S&F test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screws complete all as specified and directed.

S&F GI pipe light grade of size 25mm dia for protection of conductor for wall/floor etc complete all as specified and directed.

S&F Decorative CITY 1 wall light fixture made up of Polycarbonate suitable for 9 W LED lamp (B22) includin 9 W LED Bulb etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexiblecopper conductor cable with suitable size complete all as specified and directed.

Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.

M&L for earthing complete of advance encapsulated compound based CPRI tested maintenance free, pipe-in-pipe technology upgrated (Zinic & alloy coated) Zinic coated (80-100) microns with pure (99.9%) & alloy coating (200-250) microns earthing system confirming IS-3034 the outer and inner pipe should be 76.2mm & 41.9mm dia 2 mtr length zinic coated with additional special alloy coating 300mm on the top side for additional protection of the terminal the annular space between the pipes being filledup with compact fill(CF) (Crystalline conductive compound) the compact fill (CF) mixture which is machine pressed in the pipes should not disintgrate or collapse when outer pipe corrods, the inner pipe should be extended with terminals for connectivity. The job includes digging the pits and refilling the same by electrode/conductolite back fill compound (Ground enhancer) the BFC should be eco friendly it should not contain environmentally hazard materials having ROHS certification from NABL accredited lab. The earth pit should be provided with a FRP earth pit cover for protection and safe guard of terminals. In area where soil condition is bad good earth is to be arranged to fill the excavated pits by mixing the same with BFC 4 bags (as per soil condition) extra per pit/unit. As earth electrode is the main component of the earthing system which is indirect contact with the ground and thus provides a means of releasing or collecting earth leakage current. The materials should have a good electrical conductivity & anti corrosion properrty in wide range of soil condition complete and testing on completion all as specified and directed Make:- ASHLOK Model ASEEL or equivalent Note:- Earth result should be obtain minimum 1 Ohm.

S&F LED Tube Light luminaries with high performance LED with driver 1x9/10W (2 Feet long, Cool day/Warm white) complete all as per specified and directed. Make- Havells/Crompton/ Philips.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m including cutting of wall and finishes to the existing complete all as specified and directed. Make:Usha/Crompton/Havells.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. and fixing with necessary MS fasters complete all as specified and directed. Make:Usha/Crompton/Havells.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 16/25 Amp complete all as specified and directed. Make:-Legrand/Standard/Havells.

M&L for concealed sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through and including PVC conduit of required size medium grade complete all as specified and directed.

Schedule of Credit

Shree Ram Construction

J T ENTERPRISE

M/S BENGAL ENGINEERING ENTERPRISES

M/S G D CONSTRUCTION

M/S P. RAI CHOUDHURY AND CO.

M/S K M CONSTRUCTION