Repair to Tiling, False Ceiling and misc repairs in bldg at Kapra and Bhalra at Bhalra Mil stn under AGE (I) Bhalra

Amount

Dismantling floor, hearth or wall tiling incl. cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall/ceiling board as in ceiling and lining of any gauge or any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge.

Taking up or down GI tubing and connection 15 mm bore , including cleaning for refixing complete all as specified and directed by Engineer-in-Charge.

Taking up or down GI tubing and connection 20 mm bore , including cleaning for refixing complete all as specified and directed by Engineer-in-Charge.

Dismantling of PVC 75/110mm bore drain pipe jointed in cement motor and taking out any where, of required completeall as specified and directed by Engineer-in-Charge.

Demolition of (unreinforced) cement concerete in ground floors and paving not exceeding 15 cm thickness (below or above GL) complete all as specified and directed by Engineer-in-Charge.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for vitrified coloured ceramic tiles, light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for non skid coloured Ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for glazed coloured ceramic tiles in vertical surface 350x250x7mm/450x350x7mm thick, set & jointed in neat cement slurry & pointed in coloured cement to match the tile over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for Cement concrete type B-0, 1:2:4 (Uuing 12.50 mm graded agg.) 25mm thick as in leveling course, floorings, pavings and similar work complete all as specified and directed by Engineer-in-Charge.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

M&L for pre-painted designer false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600 mm x 600 mm with main runner 38 mm x 24 mm and wall angle 24 mm x 24 mm using 4 mm thick High Pressure Non Asbestos Fibre Cement prepainted decorative board (E-Board Classic) in a grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450 mm from the adjacent wall, Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610 mm c/c,so as to form 600 mm x 600 mm grid and painted with two coats of acrylic emulsion paint of approved shed /make over a coat of cement primer before installing it on the grid complete all as specified and directed by Engineer-in-Charge. Make: Everest Industries Ltd or equivalent as per IS 14862.

M&L for 15 mm bore GI tube , medium grade ,with all fittings, fixed complete to wall or laid in floors etc,complete all as specified and directed by Engineer-in-Charge.

M&L for 20 mm bore GI tube , medium grade ,with all fittings, fixed complete to wall or laid in floors etc,complete all as specified and directed by Engineer-in-Charge.

Refixing 15mm bore old steel tubing and connection in new or old position including providing new GI fittings complete all as specified and directed by Engineer-in-Charge.

Refixing 20mm bore old steel tubing and connection in new or old position including providing new GI fittings complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S & F in repairs for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer-in-Charge.

S&F in repairs of CP Towel rail 600mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Vitrous china wash hand basin, angle back, size 600X480 MM, snow white colour,including 32mm bore brass CP waste coupling with long screwed shank and fly nuts , PVC flexible waste pipe of bore 32 mm and adequate length, 15 mm bore PVC connection pipe 600 mm long with brass nuts on both side, complete all as specified & directed by Engineer-in-Charge.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc. complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Chromium plated shower roses with or without swivel joints of any colour for fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair, 15 mm bore bib taps,PTMTof any colour , screwed down, screwed for iron pipe or for brass ferrule (Min wt-90 gms) etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm bore Bib taps chromium plated fancy type screwed down for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

S & F in repair 15mm bore stop angle valve chromium plated, any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)→ and fixed complete all as specified.

S&F in repair, 600 mm long PVC connection 15mm size with PTMT nuts complete all as specified and directed by Engineer-in-Charge.

S & F in repair, soap dish chromium plated any size fixed to plugs with chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous china squating pan, Orissa Pattern, size 580 x 440 mm white with integral foot rests and PVC P or S trap (excluding flushing cistern and flushing pipe ) including connection to trap & flushing pipe etc complete including making good to floor complete all as specified and directed by Engineer-in-Charge.

S&F in repair, Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern) including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe , pvc cover sheet in same colour etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair, Vitreous china bowl urinal flat back size 430X370X340 with grating and union for discharge pipe (excluding flushing cistern ,flush pipe and waste pipe) complete all as specified and directed by Engineer-in-Charge.

S&F in repair, 110 mm bore PVC (SWR) Pipe single socketed in any length with rubber ring joints, fixed in wall and including brackets complete all as specified and directed by Engineer-in-Charge.

S&F for 75 mm bore PVC (SWR) Pipe single socketed in any length with rubber ring joints, fixed in wall and including brackets complete all as specified and directed by Engineer-in-Charge.

S&F for PVC (SWR) reducer for 110 mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S&F for PVC (SWR) cowls 75 mm bore pipe all complete all as specified and directed by Engineer-in-Charge.

S&F for 110 mm PVC (SWR) WC connector with lip ring complete all as specified and directed by Engineer-in-Charge.

S&F for PVC (SWR) S trap 110mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC (SWR) junction single T equal or unequal 110mm complete complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC (SWR) bends any radius, 110mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair 10 litre capacity PVC valveless, syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle, flush pipe etc complete all as specified and directed by Engineer-in-Charge.

S & F in repair plastic water closet seat conver, white/ black, closed pattern with flats bottom and cover and mild steel chromium hinging device, of approved make and quality etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair Brass CP wall Mixer for mixing hot & cold water screwed down for iron pipe and fixed to 15 mm dia pipes complete all as specified and directed by Engineer-in-Charge.

S&F in repair, Brass CP wash basin mixer 15mm bore dia for mixing Hot or Cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge.

S&F in repair 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing to store complete all as specified and directed by Engineer-in-Charge.

S&F in repair 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including Dismantling water tanks and removing to store complete all as specified and directed by Engineer-in-Charge.

S & F in repair mild steel,chromium plated curtain rods with brackets, including fixing stops,rollers bracket etc with harrison rails complete all as specified and directed by Engineer-in-Charge.

S&F in reapir Ball valves 15mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. (Minimumweight 15mm-142gms/20mm-210gms./25mm- 455gms/40mm- 690 gms)

S & F in repair Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.. (Minimumweight 15mm-142gms/20mm-210gms./25mm- 455gms/ 40mm- 690 gms)

S&F in repair Grating doom 125mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and directed by Engineer-in-Charge.

M/S KOTWAL CONSTRUCTIONS (BID ID -3343764)

M/S MAHALUXMI BUILDERS (BID ID -3343952)

VEER TRADERS (BID ID -3344614)

M/S SUSHEEL KUMAR Govt. CONTRACTOR (BID ID -3343458)