Completion of balance work of Primary Health Centre Gundipora

Amount

Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms, including all leads and lifts, including getting out excavated earth and disposal of surplus excavated earth as directed: In all kinds of soil.

Providing and Laying stone soling hand packed incl all carriages

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering incl all carriages 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incl. all type of carriages from source to site of work complete

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement incl all carriages 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)incl. all type of carriages from source to site of work complete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Brick work with common burnt clay bricks of class designation 7.5 above plinth including curing and all carriages in 1:6 cement mortar incl. all type of carriages from source to site of work complete

Dry random rubble masonry with hard stone in foundation and plinth incl all carriages complete

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate incl. all type of carriages from source to site of work complete

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and applying white cement based putty of 2 mm thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

15mm Cement plaster of mix incl all carriages complete .1 : 6 ( 1 cement : 6 fine sand) incl. all type of carriages from source to site of work complete

Centering and shuttering including strutting, propping etc. and removal of form in walls and suspended floors.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position.KD wood

Providing wood work planks in false ceiling, partitions etc. sawn and fixed in position.Poplar wood

Providing and Fixing of 8 mm thick ply board in ceiling incl c/o nails all complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length incl c/o dash fasteners. KD wood

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (35 mm thick) With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured)

Providing and fixing 30 mm thick glazed shutters for doors, windows and clerestory windows using 3.5 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.2nd class Kail

Providing and fixing 3.5 mm thick glass panes with putty and beadings in woden doors, windows, clerestory windows, all complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade incl a coat of wood primer Two or more coats on new work

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: (Medium B-type) 25mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete

25 mm nominal bore

25 mm dia ball valve

25 mm dia tanky nipple

Providing and Fixing of PVC water storage of approved brand and manfacturer.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

Providing and fixing white vitreous china squatting type water closet (Indian type W.C. pan) with 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required::

Providing and fixing 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 630x450 mm.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510mm bowl depth 200mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia

Providing & Fixing of sanitary fittings of approved make

CP Sink Mixer (long neck)

CP Basin Mixer (long neck)

CP Wall Mixer

PVC Connections

CP waist coupling

Geyser (50 Ltrs)

Geyser (25 Ltrs)

CP Bib cock

CP Angle valve

CP Grating

P/F of PVC pipes and fittings of approved make and quality incl cutting and making good the walls.(B-type)

100 mm dia pipe

100 mm dia plain bend

100 mm dia door bend

100 mm dia plain tee

100 mm dia door tee

100 mm dia P trap

100 mm dia floor trap

150 mm dia pipe

150 mm dia plain bend

150 mm dia plain tee

4"x6" Reducer

75 mm dia pipe

75 mm dia plain bend

75 mm dia Cowel

100 x 75 mm dia reducer

P/F of powder coated alumnium hardware fittings and fixtures of approved brand and quality.

150 mm T bolt

150 mm Handle

225 mm Aldrop

100 mm T bolt

100 mm Handle

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design internal dimension 450x450x450 mm

Grinding/ cleaning of existing granite/ tile floors, walls incl cost of machinary and chemicals wherever required all complete

Clearance of site by manual labour incl removal and disposal of unhygenic mulba (bird droppings/carcass etc) as directed at site.

SHAHZADA SHAHNAZAHMAD