PROVN OF ADDL/ALTN TO MAIN ENTRANCE GATE NO 02 AND ASSOCIATED INFRASTRUCTURE OF ARMY WAR COLLEGE.

Amount

Earth work in any kind of soil excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (exceeding 30cm depth 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. complete

Same as per item No. 01 but depth exceeding 1.5m upto 3.0 m

M&L for PCC 1:4:8 type D2 using 40mm gradd stone aggregate as in foundation, filling and mass concrete all as specified and directed.

Use and waste of flat form work to sides of concrete flat foundation, footing, raft etc for fair finished surfaces of concrete complete all as specified and directed

Use and waste of flat form work to sides of retaining wall, abutments, culvert wall etc for fair finished surfaces of concrete complete all as specified and directed.

Use and waste of flat form work to sides of concrete flat column, pillars etc for fair finished surfaces of concrete complete all as specified and directed

Use and waste of flat form work to sides of concrete flat all beams, ARCHES i.e. lintel,roof, plinth etc for fair finished surfaces of concrete complete all as specified and directed.

Use & waste of formwork to sides of roof slab depth exc 100m but n. exc 200m for fair finished surfaces of concrete all as specified and directed

Use & waste of form work to sides and bottom of arches for fair finished surfaces of concrete complete all as specified and directed.

M&L for RCC M25 design mix using 20mm graded aggregate as in footings all as specified and directed.

M&L for RCC M25 design mix using 20mm graded aggregate as column all as specified and directed.

M&L for RCC M25 design mix using 20mm graded aggregate as beam, roof beam,plinth beam lintel,arches all as specified and directed.

M&L for RCC M25 design mix using 20mm graded aggregate as in walls, retaining walls, basement walls, ballast walls and the like , any thickness above top of footings includings attached pillasters and buttresses all as specified and directed.

M&L for RCC M25 design mix using 20mm graded aggregate as in slabs all as specified and directed.

M&L for brick work in CM 1:6 using fly ash bricks staright or curved on plan exc. 6mm mean radius all as specified and directed.

M&L for ornamental type army logo of dia 450mm as approved by GE.

S&F for mild steel framed work ornamental gates of angle or other section with gusset plates, rails,grills, gratings,spikes, braces, etc complete rilled for fixing of steel sheeting or other covreing Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covring , running rails and guides) and hanging also fastening and fixing complete Stel Fe 410-W(Gde-E250) Quality A.

M&L for SS letters box type of size n exc 30cm in height and n exc 30mm in width in english/hindi in any colour as directed bty engineer in charge.

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specifed and directed.

All as per Item No 19 above but dia 5mm and above upto 10mm for stirrup/spaces.

M & L 20 - 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above.

M&L for 5 mm thick renderning in cement mortor 1:4 finished even and smooth surface without using extra cement on ceiling complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces or other than fair faces of brick work or concrete surfaces of walls firnished even and smooth without using extra cement completeall as specified and directed

M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces of walls finished even and smooth without using extra cement with using water proofing compound complete. Note : WPC shall be measured and paid separately.

M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregates as in coping including necessary form work requried all as specifeid and directed.

Supply only water proofing compound.

M&L of moorum/red bajri filling under floor and paving spread , levelled , rammed including watering complete all as specified and directed

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron pickets or fencing post or any description etc, all as specified and directed.

M&LSand filling under floors or in foundations including watering and consolidation for interlockin paver block complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40Grade with grey cement and no pigment laid over sand cushioning complete all as specified and directed. Note : Sand cushioning shall be measured and paid seperately.

M& L preparation of newly plastered surfaceds of walls,ceiling and apppyling two coats of oil bound distemper over a coat of 1mm thick putty complete all as specified and directed.

M&L for preparation of new stel and iron surfaces of any description not otherwise described over 10cm width or girth and appyling two coats of synthetic enamel paint over one coat or red oxide primer complete all as specifed.

M&L for preparation of new plastered surfaces of walls and appyling two coat of exterior emulsion scrylic wather coat paint (Apex) over of putty complete all as specified and directed

M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window, cilts, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specifeid and directed.

M&L Jaisalmer yellow/white/Red sand stone with hammer dressed face work (with maximum depression form staright edge held against the dressed surface not exc 20mm) about 40mm high, 75mm deep in straight courses laid and jointed in cement and stone admisxture of white cement and sandstone dust 1:1 all as specified and directed.

S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applyingPVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F aluminium handles, size 150 mm cast type, anodised complete all as specified and directed.

S & F aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all specified and directed.

S & F butt hinges, size 100 mm type C-21 extruded aluminium alloy with galvanised mild steel hinge pin, anodised ISI marked complete all as specified and directed

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and directed.

S&F 10mm thick toughened glass as in hinge , doors, partitions, windows and similar work cutting to shape , drilling holes as required.

S&F SS cleats for securing and fixing glass complete

M&L for premix bituminous macadam (consolidated thickness not more than 75 mm) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and rolled with 8-10 tonne power roller to required gradient and camber up to outer edges of roads on existing black top surfaces complete all as specified and directed.

M&L for preparing surfaces of existing black top surface with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clean the surfaces with gunny bags to remove all loose dirt etc and M&L for applying evenly a tack coat with bitumenous primer using paving bitumen VG-10 at the rate of 05 kg / 10 sqm and M&L for premixed hot mix Asphaltic Semi Dence Concrete using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix and with thickness of 25 mm (consolidated Thickness) including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber complete all as specified and directed. Note for item No 45 & 46. (i) Cost of testing charges, materials and transportations etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver only.

S & F tubular rolled sections as post, rafter, purlin, and its connected wk for shed structure and similar work complete using ERW or induction butt welded tubes conforming to I.S. 1161-1976 grade St.-240, all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated/plain sheeting fixed with coach screw and washer in roof/wall etc complete all as directed.

Dismantling of plane or corrugated steel/fibre sheeting of any gauge , thickness including nanital or similar pattern from roof/wall complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in sun shade, roof covering/ cladding to wall, and similar work fixed with self tapping screws complete all as specified and directed.

Taking down of existing GI pipe line of size 80 mm by disconnection union , elbows for reusing at site at required places/ for diversion all as specified and directed. Note : Necessary excavation and earthwork will be measured and paid sepetaely

Taking down carefully copper/aluminium point wiring of lights,fan,bell ,sockets and power point complete all as specified and as directed. Note: Taking down of fittings and fixtures such as switches,sockets, ceiling rose,flush boxes etc shall be measured and paid seperately

Taking down care fully light / gate light fitting of any size and type for refixing where directed all as specified and as directed.

M&L point wiring with 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by means of brass screws incl modular cover plates and cover frame any size/module, for mounting or housing switches, socket outlets, fan regulators, etc. including well finishing with wooden panelling with all other fixing accessories for one light controlled by one 5 / 6 Amps switch complete all as specified and directed.

All as per Sl. item No. 54.00 above but for one 3 pin, 5/6 Amps socket outlet point on same board controlled by one, 1 way 5/6 Amps switch.

All as per item No 54.00 here in above but for One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch

M&L point wiring with 2.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by means of brass screws incl modular cover plates and cover frame any size/module, for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one 15A socket point independent complete incl taking down of old unsv point wiring all as specified and directed.

S&F modular switch 1 way 6A, 1 module, complete all as specified and directed.

S&F modular socket outlet, 6A - 2/3 pin combined 2 module, complete all as specified and directed.

S&F modular socket outlet, 16A - 2/3 pin combined 2 module, complete all as specified and directed.

S&F modular switch 16A 1 module, complete all as specified and directed.

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed .

Supply and fixing surface /wall mounted LED batten polycarbonate houseing for retrofit LED tube T-8 type upto 1X 20 Watt , 4 feet long prewired incl integrated electronic driver complete with all connected accessories all as specified and directed

S & F retrofit LED tube T-8 type 1 X 20 Watt , 5700 to 6500 K and THD less than 15 % polycarbonatwe body , glass tube 4 feet long complete with 02 years warranty all as specified and directed .

S & F of LED down lighter fitting 12 watts having effiency > 110 Lumen / watts system output of minimum 1980 lumen ,THD <10 % PF > 0.95 CRI > CCT 5700 -6400 K With IP20 protection single piece die cast aluminium housing having PC LED driver should be electronic , surge protection should be 4 KV .LM 79 and LM 80 report submitted at the time of product approval

Supply and fixing strip light of 25 watts for COB lighting with IP 20 protection LED strip should be included LED driver for every 5 meter role and warrenty should be 2 years from the date of purchase and color temparature should be warm white incl fixing along along POP/wall pannel edges in prestigeous building all as specified and directed.

M&L for recessed spot light round Astral Round environmental friendly aesthetically designed , decorative recess mounted 2W LED spot light for low ceiling height applications incl fixing in POP /grid ceiling complete all as specified and directed.

M&L for spot light 7 watts surface mounted in matt finish aesthetic look complete incl connection from ceiling rose to connector Model No LHEEGBPBPH1W007 of havels/equivalent make in philips/crompton

S&F MCB DB, SPN 8 way, IP-43, IK 09, double door type with metal door, 230 V,50 Hz suitable for fixing MCB SPN as incomer and SP MCB/Isolator as outgoing, including taking down old DB with MCBs, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.

S&F MCCB ,DB VTPN wall mounted double door 4 way 415 volts with facility to provide MCCB 3 pole 125 Amps 25 KA as incomer and SP/TP MCB's/Isolator as outgoing including removed old U/S DB in the wall again fixing the new DB and wall finising complete all as specified and as directed

S&F MCCB 3 pole 415 V 125 A Hz with rupturing capacity 25KA.

S&F MCB SPN 16 to 32 Amps,10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB SP 6 to 32 Amp, 10 kA breaking capacity, 'C' curve complete all as specified and as directed.

S&F MCB TP 32 Amp, 16 kA breaking capacity, 'C' curve complete all as specified and as directed.

Sub main wiring with 2 single core,1.5 Sqmm, PVC insulated PVC unsheathed stranded copper conductor cable (FRLSH) in and including PVC concealed/ surface conduit (FRLS)incl one run of of earth wire with 1 x 1.5 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete all as specified and directed. Note: Two run of PVC wire 1 Run of earth wire and one run of conduit shall be taken as one RM

Sub main wiring with 2 single core,2.5 Sqmm, PVC insulated PVC unsheathed stranded copper conductor cable (FRLSH) in and including PVC concealed/ surface conduit (FRLS)incl one run of of earth wire with 1 x 2.5 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete all as specified and directed. Note: Two run of PVC wire 1 run of earth wire and one run of conduit shall be taken as one RM

M & L sub main wiring with 4 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed. NOTE:- 4 runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

Supply , fixing rigid non metallic PVC conduit fixed conceiled/on wall wherever necessary with all conected accessories 20 mm dia for LAN/ cable TV connections complete all as specified and as directed

M&L for Triple pole and earth encolsure with a three pin and earth plug with socket 415 Volts , 50 Hz complete with one triple pole MCB TP 32 Amps complete all as specified and directed.

S&F for ceiling fan, 230 Volts, 50 Hz 1200 mm sweep with down road, canopy , blades , BLDC motor etc and service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan teriminal including writting the MES Number with synthetic enamel paint complete all as specified and as directed.

Excavation in trenches in soft / loose soil not exc 1.5 metre wide, not exc 1.5 metre in depth, for laying of cables not exc 10 Sqm on plan and not exc 1.5 m in depth and getting out, trimming sides, forming bottom surface to required level complete all as specified and directed by Engineer-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm

Supply and laying fine sand for cable protection in layers incl punning. Note : Thickness after pushing shall be measured.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm 3.5 core in trenches / under PCC/interlocking tiles incl making good of surface with PCC/ cementing all as as directed at site

S & F tubes, 'light grade,galvanised iron , with all fitting of size 40 mm ;laid in trenches for cable protection all as specified and directed

Fixing only GI pipe line 80 mm size obtained from item No511 at site as directed by Engr in charge incl neccesary GI fitting like union, bend , elbows all as speciled and directed. Note:- Excavation and earth work will be measured and paid seperately as per relvent item in the schedule.

M&L for GI tubing 80 mm size medimum grade complete incl all fittings laid in trenches / walls all as specified and directed.

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 3, connected to earthing test point complete including testing on completion all as specified.

M/S UnitedConstruction

yash enterprises

Goyal Construction