Renovation of Resident Engineer, Senior Executive Engineer, Civil Division, Civil Sub Division and SDO Tower (DG) Line offices complex at Ganguwal

Amount

Scraping of cement plaster. (As per CSR-2020 item No. 8.31(c))

Dismantling cement conglomerate floors (25 mm to 50 mm) thick including concrete base. (As per CSR-2020 item No. 8.17)

Removing, resizing and re-fixing of doors shutters. (As per AOR)

12.5 mm thick cement plaster 1:4 (As per CSR-2020 item No. 15.9)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish. (As per CSR-2020 item No. 16.65)

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade. Note :- Only First Quality paint manufactured by reputed firm like Nerolac, Asian, Berger, ICI (As per CSR-2020 item No. 16.10)

White washing (two or more coat) (As per CSR-2020 item No. 16.2)

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade. (As per CSR-2020 item No. 16.13)

Regarding terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks removing mud plaster preparing the surface of mud plaster to proper, slope relaying of mud plaster gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 Cement and 3 fine sand) including replacing the unserviceable tiles or bricks with new over and disposal of unserviceable material to the dumping ground with in 50 m lead (the Cost of new tiles or brick excluded). (As per CSR-2020 item No. 31.11)

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified (As per CSR-2020 item No. 13.55)

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1: 2: 4: over 50mm thick cement concrete 1: 8: 16. (As per CSR-2020 item No. 13.45)

Providing and fixing on wall face unplasticised Rigid PVC Rain water pipe single socket. (i) UPVC Rain water pipe (Working pressure 4Kgf/cm2) pipe 110 mm Dia confirming to IS:4985 including fixing of MS clamps. (As per CSR-2020 item No. 13.74-a-i)

Providing and fixing 110mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specification and to the entire satisfaction of Engineer-in charge. (a) UPVC 110 mm bend (As per CSR-2020 item No. 13.75-a)

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (As per CSR-2020 item No. 13.80)

Providing and fixing IVL Crystal with polycarbonate anti-Glare cross Lourve 4x14w FTL T-5. (As per AOR-I)

Providing and fixing PVC wire single core 4 mm square copper, 2.5mm square copper, 1.5mm sq., PVC pipe 1” and ¾” dia along with PVC accessories switches, boards, Nails etc. (As per AOR-II)

Nicking cement concrete surface (Over 28 days old including preparation and laying slurry). (As per CSR-2020 item No. 10.31)

Providing and laying Anti-skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make such as Kajaria, Somany, Johnson, Nitco in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading. (As per CSR-2020 item No. 14.72)

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology such as Kajaria, Somany, Johnson, Nitco (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (a) Size 600x600 mm (As per CSR-2020 item No. 14.113-a)

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/ Glosy/ Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make such as Kajaria, Somany, Johnson, Nitco in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (As per CSR-2020 item No. 14.127)

Earth work in excavation of foundations of bridges culverts, building including handling of materials with combined lead of 15 metres dressing of bed and sides stacking the excavated soil clear from the edge of excavation and subsequent filling around:-- (a)For ordinary gravel soil involving pick work. (As per CSR-2020 item No. 6.7 (a))

Conglomerate floor 50mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm & 100mm fine sand filling using mechanical mixer for mixing of material (As per CSR-2020 item No. 14.10)

Cement concrete 1: 8: 16 (b) With stone aggregates 40mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type (As per CSR-2020 item No. 10.6 (b) (ii))

Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge. (As per CSR-2020 item No. 14.138)

Cement concrete 1:2:4 (a) with stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type (As per CSR-2020 item No. 10.13-a-ii)

Providing and laying LDPE ( Low Density Polyethylene sheets) over roofing before laying of roof tiles, having thickness of 200 micron including cutting, jointing ( heat seal jointing with hot iron ) and overlapping of minimum 150mm and CC gola 75 mm wide, complete in all respect to the satisfaction/approval of Engineer-in-charge (As per AOR-III)

Dismantling sanitary Fixtures such as European/Indian/Orissa W.C PVC/China ware cistern, wash hand basin, Urinal Port, Sinks and CP fitting and Disposal of dismantled material with in distance of 100 mtr complete in all respect as required by Engineer-in-charge.

(a) European/Indian/Orissa W.C (As per CSR-2020 item No. 30.88-a)

(b) PVC/ china ware cistern (As per CSR-2020 item No. 30.88-b)

(C) Wash hand basin/ urinal pot (As per CSR-2020 item No. 30.88-c)

Providing and laying, jointing, fixing, and testing ISI Marked G.I Pipe (as per IS 1239) B- Class, premium make such as (Jindal Hissar) including cost of specials (Such as tees, bends, socket elbow etc.) painting with anticorrosive bitumastic paint, testing, cutting, threading inside building complete. (a) 15mm i/d (As per CSR-2020 item No. 28.35-a)

Providing and laying, jointing, fixing, and testing ISI Marked G.I Pipe (as per IS 1239) B- Class, premium make such as (Jindal Hissar) including cost of specials (Such as tees, bends, socket elbow etc.) painting with anticorrosive bitumastic paint, testing, cutting, threading inside building complete. (b) 20 mm i/d (As per CSR-2020 item No. 28.35-b)

Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) such as Hindware, Cera with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. (a) Chinaware extended wall mounted E.W.C. with matching chinaware cistern and seat cover complete in all respect. (As per CSR-2020 item No. 30.5)

Providing and fixing jet spray with 2'-6" long PVC pipe. (such as Hindware, Cera) a. With C.P Brass nut (As per CSR-2020 item No. 30.8-a)

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge)such as Hindware, Cera including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. (iii) Size 630 mm x 450 mm x 830 mm (As per CSR-2020 item No. 30.31-iii)

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) such as Hindware, Cera for wash hand basin complete in all respect. (i) Vitreous chinaware standard white pedestal for wash hand basin. (As per CSR-2020 item No. 30.43-i)

Providing & Fixing in position 5 mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hardboard backing fixed in with rawl plugs 50mm, C.P brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in-charge) Size 600mmx450mm (As per CSR-2020 item No. 30.61-a)

Providing & Fixing in position C.P/Aluminium khunti of approved make (to the approval of Engineer-in-charge) such as Hindware, Cera fixed into wall with c.p. brass screws and rawl plugs etc. complete in all respects (b) C.P. Brass khunti with 4 pegs (As per CSR-2020 item No. 30.63-b)

Providing & Fixing in position liquid soap container of approved make to the approval of Engineer-in-charge) such as Hindware, Cera complete in all respects. (b) Acrylic liquid soap container (As per CSR-2020 item No. 30.67-b)

Providing and fixing in position premium range C.P brass fitting and accessories of approved make (to the approval of Engineer-in-charge) such as Hindware, Cera complete in all respect) (A) CP Brass fittings

(ii) C.P Brass Bib cock with wall flange (As per CSR-2020 item No. 30.69-A-ii)

(iv) C.P. brass 15mm Concealed stop cock with adjustable wall flange with seal.(Outer +Inner Body) (As per CSR-2020 item No. 30.69-A-iv)

(V) C.P. brass 3-Hole Basin Mixer Without Popup Waste System (As per CSR-2020 item No. 30.69-A-v)

Providing and fixing in position premium range C.P brass fitting and accessories of approved make (to the approval of Engineer-in-charge) such as Hindware, Cera complete in all respect) (B) C.P Brass accessories

(i) C.P Brass towel rail size 15 mm dia 610 mm long (As per CSR-2020 item No. 30.69-B-i)

(iii) C.P. brass soap dish holder with glass dish (As per CSR-2020 item No. 30.69-B-iii)

(iv) C.P. brass toilet roll holder with flap (As per CSR-2020 item No. 30.69-B-iv)

(v) C.P. Glass Shelf 600mm long (As per CSR-2020 item No. 30.69-B-v)

Providing & Fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect (b) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut (As per CSR-2020 item No. 30.72-b)

Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self-cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors etc. (b) With 100mm x 75mm i/d Floor Trap (weighing 5.8 Kg) (As per CSR-2020 item No. 30.79-b)

Cutting chase in brick walls in cement or in floor for embedding G.I or C.I pipes line and making good the same to its original condition (a) Size 75 mm x 75 mm (As per CSR-2020 item No. 30.85.-a)

Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect. (As per CSR-2020 item No. 30.20)

Providing and fixing in position automatic brass ball cock in tanks. (such as Hindware, Cera) (b) Brass ball cock with rod and plastic ball. (i) 15mm i/d (As per CSR-2020 item No. 30.96-B-i)

Providing and fixing and jointing brass ball valves screwed with SS/Brass ball/Spindle and Teflon seats on G.I Pipes lins including all carriages complete. (a) 15mm i/d Brass Ball valves (As per CSR-2020 item No. 28.44-a)

Providing & Placing in position on tarrace (at all floor level) HDPE Water Storage Tank of approved make ( to the approval of Engineer-in-Charge) such as syntex, Orrient, Dplast with suitable loking arrangement and making necessary holes for inlet, outle ant over flow pipe but without fitting and support for tank (i)Triple layer tank 2 Nos. x1000 Ltr capacity tank Each (As per CSR-2020 item No. 30.97-A-i)

Providing & Placing in position on terrace (at all floor level) HDPE tank cover for water storage tank of approved make ( to the approval of Engineer-in-Charge) complete in all respect. (ii) For 1000 ltr. capacity tank and above. (As per CSR-2020 item No. 30.97-B-ii)

Bidder Name

Amount in Words

VINOD KUMAR SHARMA

SUBASH CHAND

Harvir Singh Govt. Contractor

VINOD KUMAR SHARMA

SUBASH CHAND