REPAIR TO BLDG NO. PS-79 (03 X QTRS) AT KORE JAGIR, NS-524 AT 489 (I) COMP PL, SQUASH COURT AT TOI AND PROVN OF FOOT BRIDGE NEAR KV SCHOOL UNDER GE NAGROTA.

Amount

Taking down chowkats with shutter n. exc 1.5 sqm each. (without taking of shutter from the frame) .All as Specified

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and not exc 4 Sqm each.complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm complete all as specified and directed.

Demolition of brick work / stone masonry built in cement mortar or cement lime mortar including all quoins ,arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground levels), complete all as specified and directed.

Demolition of cement concrete(Un-Reinforced) of any description and any position not otherwise specifically provided, complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete(Reinforced) of any description and any position not otherwise specifically provided reinforcement cut as required to faciliate demolition, complete all as specified and directed by Engr-in-Charge

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed.

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed.

S & F factory made solid PVC door frame of size 50mm x 47mm ,made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing, complete all as specified and directed.

S & F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

Floor door stopper of aluminium alloy body and tongue , anodised , with hard drawn steel spring , fixed in floor , over all length of cover plate 140 mm , fixed in repair all as specified.

S & F 125 mm extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed..

300 mm mild steel oridinary rat tail rod pattern springs including roller and roller plates, complete all as specified and directed.

Hold fast/clamps of mild steel stay for rain water pipe etc confirm to Fe-290 Gde E-165 complete all as specified and directed

S&F magic eye with magic glass, complete all as specified and directed

S & F 100 mm long hasp and staple aluminium anodized with steel hinge pin including bolt to hinge plate, complete all as specified and directed.

S & F 250 mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S & F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

Box type Steel windows with double shutters (inside for wire guage i.e. without glazing bars and outside for glazed window i.e. with glzzing bars), including guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing steel window and shall be conforming to relevant IS-1038), complete all as specified and directed.

Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS, complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured and paid separteley.

S & F 30 mm thick (style) Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S & F 30 mm thick second class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass, etc. Size of memebers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) for doors, complete all as specified and directed.

S&F 19 mm thick solid PVC board prelaminated one side and other side plain as in cupboard shutter, shelves, partitions and kitchen cabinets complete all as specified and directed

S & F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm dia and fixed with tinned tacks or galvanised mild steel staples, complete all as specified and directed.

M&L thick sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares n exc 0.5 sqm complete all as specified and directed.

All as per ser item No.27.00 here in abvoe but figured glass

S&F in repairs curtain rod 25 mm dia aluminum brass polished with ends bulb rings of required size including bracket complete all as specified and directed

M&L brick work with sub class 'B' bricks in 1:6 cement mortar on straight or curved on plan exc 6 m , complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with using WPC finished even and smooth without using extra cement, complete all as specified and directed. Note: WPC to be measured and paid separately

M & L for rendering 5 mm thick on fair faces of concrete surfaces in CM 1:3 on ceiling finished even and smooth without using extra cement including two coat of white wash on ceiling , complete all as specified and directed.

Supply only integral waer proofing compound

M&L for providing 10 mm thick cement plaster in CM 1:4 on parapets over roof facias and finished even and smooth without using extra cement complete all as specified and directed

M&L for roughning surfaces of old concrete surfaces of any description over damaged surfaces irregular fascia, chajjas and in similar work and also for narrow width etc and rendering dubbing coat 15 mm thick cement plaster in CM 1:4 over a coat of cemnt slurry @ 3.00 Kg/Sqm making surfaces even followed by 5 mm rendering in CM 1:3 finished complete all as specified and directed

Prepration of newly steel surfaces any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Prepration of wood or wooden based new surface of any description, over 10 cm width or gridth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including 2 to 3 mm thick wall putty, complete all as specified and directed.

Complete removal of existing treatment from wall and applying two coat of oil bound distemper over and incl a layer of wall care putty 2 mm to 3 mm thick complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of cement base paint, complete all as specified and directed.

Complete removal of existing treatment applying two coats of cement base paint old wall surface complete all as specified and directed

M & L for preparation of old plastered surfaces of ceilings and applying two coats of white wash, complete all as specified and directed.

M&L 18-20 mm thick machine cut kota stone flooring (Each stone not less than 55 cm x 55 cm) laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding & polishing (mirror finish) over 15mm thick screed bed in CM 1:4 as in floor finished rough including roughening of existing surfaces by pick axicess and applying a coat of cement slurry @ 03 kg/Sqm of surfaces all as specified and directed.

All as per ser item No.44.00 here in abvoe but in tread of steps of size (0.90-1.00 x 20-30 cm)

M&L 18-20mm thick machine cut kota stone slab in riser of skirting, dado and pillar set and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing (mirror finish) over 15mm thick rendering in CM 1:4 and applying a coat of cemtn slurry @ 03 kg/Sqm of surface including taking out existing dado all as specified and directed.

All as per ser item No.46.00 here in above but in riser of staircase of size 0.90-1.00 x 18-25 cm

M&L marble work 15 mm thick (550 mm long x 75 mm wide strip) as in border in flooring over 15 mm thick acreed in CM 1:4 including pointing in white cement 1:2 using marble dust with mixture of pigments to match with white marble including rubbing grinding and polishing complete all as specified directed.

Complete removal of exisiting treatment applying two coats of plastic emulsion paint over a coat of wall putty 2 to 3 mm thick on plastered surfaces preparatory to distempering on wall surfaces complete all as specified and directed

M&L two coats of oil bound distemper on newly plastered surface of walls over a coat of primer including preparation of surfaces, complete all as specified and directed

M & L for 62 cm wide Udaypur green stone 15 to 18 mm thick. (table rubbed and polished) as in cooking plateform of size not less than 2 m in length, incl cutting for sink over and including 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match, complete all as specified and directed.

All as per ser item No.51.00 but size 550 x 75 -100 mm ( as on edges of cooking platform)

M&L for non skid ceramic coloured tiles 400x 400 x 7 to 8 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or beddding layer of CM 1:4 including dismantling of existing tiles, complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as a sub base floors and paving etc. finished even and smooth, complete all as spd and directed

M & L for 450 x 300 mm thick glazed ceramic coloured tiles as on walls/vertical surface over 15 mm thick rendering in cement mortar 1:4, including dismantling floor, hearth or walll tiling including cement mortar bedding (but not backing) removing serviceable tile to store and rubbish off the premisis complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in benching coping and similar items including weathering slightly rounded or chamferred angles and throughting, complete all as specified and directed.

M&L for 50mm thick plain cement concrete, 1:3:6, type C1 (using 20mm graded crushed stone aggregates) as in plinth protection/paving including finishing surface even and smooth without using extra cement, complete all as specified and directed.

M & L for Cement concrete 1:5:10 Type E-2 (using 40 mm graded crushed stone aggregate) as in any situation complete all as specified and directed.

M&L for form work to chajjas troughs and similar items including edges complete all as specified and directed

M&L for form work to edges of concrete flats RCC/PCC band exc 5 cm but n exc 10 cm complete all as specified and directed

Mild Steel TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

All as per ser item No.61.00 here in above but 6 to 8 mm

S&F framed work rolled section as in framing compound girder staging for water tank , cooler frame as and the like built up from two or more beam or channel section or angles with plates stifferners etc complete all as specified and directed

S & F 500 Ltrs capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve including dismantling of existing tank,complete all as specified and directed.

Taking down 15mm bore steel tubing and connection includng cleaning for refixing or removal to store complete all as specified and directed

Taking down 20 mm bore steel tubing and connection includng cleaning for refixing or removal to store complete all as specified and directed

S&F 15 mm bore steel water tubing 'medium grade' galvanised with all fitting (i.e. Tee, socket, bend etd) complete to walls and ceilings or laid in floors, complete all as specified and directed by Engr-in-Charge.

S & F 20mm bore steel water tubing 'medium grade' galvanised with all fitting and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed by Engr-in-Charge.

M&L for cutting chases for concealed water tubing of concealed conduct (cutting n.exc 10 cm girth) and making good in CM 1:3 in brick wall complete all as specified and directed

S&F 125 mm shower rose brass chrominium plated complte all as specified and directed

S & F 15 mm bore bib taps, chromium plated cast copper alloy fency type with capston head, screwed down , screwed for iron pipe or for brass ferrule and fixed and repair complete all as specified and directed.

S&F 15 mm bore stop cock/angle valves, cast copper alloy, fancy type, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engr-in-Charge.

All as per ser item No.72.00 here in above but with long shank and cup (concealed type)

S&F 20 mm bore stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle.screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engr-in-Charge.

S&F towel rail 600 mm long of PTMT fixed with including chromium palted brass screws and wooden /plastic cleats (min weight 90 gm) complete all as specified and directed

Dismantling 100mm dia cast iron/PVC pipes including fitting taking out of trenches or wall as required complete all as specified and directed

S & F 100 mm dia cast iron soil based and vent pipe on any length with or without ears with cement joint fixed to wall complete all as specified and directed.

S&F 100 mm dia cast iron soil based and vent pipe an any legth with or without ears with cemetn joint laid in trenches or in floors complete all as specified and directed

S&F 75 mm dia cast iron soil based and vent pipe an any legth with or without ears with cemetn joint fixed to wall complete all as specified and directed

S&F 75 mm dia cast iron soil based and vent pipe an any legth with or without ears with cemetn joint laid in trenches or in floors complete all as specified and directed

S&F 100 mm bore cast iron bends(any radius) diminishing piece or tapers (large bore measured) complete all as specified and directed

S&F 75 mm bore cast iron bends(any radius) diminishing piece or tapers (large bore measured) complete all as specified and directed

S&F 100 mm bore with oval access door cast iron branch pieces single (equal or unequal) ordinary or inverted or with parallel branches complete all as specified and directed

S&F 75 mm bore with oval access door cast iron branch pieces single (equal or unequal) ordinary or inverted or with parallel branches complete all as specified and directed

S&F 75 mm cast iron vent cowl complete all as specified and directed.

S&F 100 mm cast iron vent cowl complete all as specified and directed.

M&L 75 mm cast iron floor trap with grating including jointing to waste pipe fixed complete all as specified and directed

S&F in repairs vitreous china squatting pan ORRISA pattern, size 580x440mm white, with integral foot rest(excluding flushing cistern and flush pipe) including provn of concrete bedding and connection to trap and flushing pipe antisyphonage pipe etc including making good to floor, complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) WC connector with lip ring all as specified and directed

Dismantling brick tiles or terracing tiles Single Layer on roof including cleaning the roof surface and filling the cracks (if observed) with silicon compound, complete all as specified and directed.

M&L 50 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in padding finishing even and smooth without using extra cement, complete all as specified and directed.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq m including cleaning surfaces complete all as specified and directed

M&L for APP (atatic polypropline) modified membrane 3mm thick minimum weight not less than 3kg/sqm with 160 gsm/Sqm, non wove polyster mat as center core reinforced laid with 75mm side overlap and 100mm end overlap. The membrane has to be laid with LPG torch and over lap shield and finished neat over roof including a coat of bitumen 85/25 @ 1.2 Kg/Sqm over APP membrane, complete all as specified and directed.

M&L for Cement concrete tiles 25cm x 25cm x 20mm thick, machine pressed, set jointed and pointed in neat cement slurry and roof over APP membrance laid over 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for forming square grooves in plaster n exc 12 mm deep and n exc 15 mm on face compelete all as specified and directed

Taking down plalster of sunken floor/wall, roughening and cleaning by brushing with wire brushes to remove all dirt, with and including applying a coat of cement slurry with 3.00 kg of cement per sqm over randering 15mm thick in CM 1:3 mixed with WPC finished rough , complete all as specified and directed Note: WPC measured and paid separately.

S&F in repair stainless steel plate rack madeout of 0.63 mm thick sheet wall mounted type with 5/6 portion of size 60cm x 90cm x 25 cm fixed on wooden gutties complete all as specified and directed by Engr-in-Charge

S&F in repair stainless steel sink made from AISI 304(18/8) gde steel of 1 mm over all size 688x534 mm bowl size 610x455x250 mm complete all as specified and directed by Engr-in-Charge

M&L Framed work as in door or gate of angles or other section's with gusset plate, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for handing or sliding with and including either hooks and hinges or steel hagning door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed

S & F 150 mm extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed..

S & F 35 mm thick second class hard wood, factory made, plain, framed, panelled shutters (two numbers of panels) with lock rail and panel of 9 mm BWP commercials ply or 12 mm veneered particle board on both faces. The size of rails and size as per IS:1003 (Part-I), Kiln seasoned & chemically pressure treated, complete all as specified and directed.

M&L for cement based hard plaster system confirming the requirement of WSF consisting of base coat of total thickness of app 15 mm thick and coated with imported washable paint system complete all as specified and directed

S&F sound board(Tin) of 21 feet x 17 inch made of wooden frame pasted with GI powder coated sheeet which is concealed with 2 inch x 21 feet moulded wood complete all as specified and directed

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

S&F anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

Anodised aluminium door shutter aluminium section weighing 0.55 Kg/m incl necessary joining cleat, glazing clip,ruber neoprene packing handle 2 Nos in each door hing anodised aluminum snap beading screws etc completed all as spd

Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21, 100mm long (2 Nos), suitable handle (2 No.) complete.

S & F 5.5 mm thick sheet glass and glazing with aluminium snap beading in square fixed to aluminium section, complete all as specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M & L for 10 mm thick Vitrified Ceramic tiles, Light shade, (square/rectangle) Polished area of each tile exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 400x 400 x 7 to 8 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or beddding layer of CM 1:4, complete all as specified and directed.

M & L for Glazed ceramic coloured printed tiles (first quality) of size 450 mm x 300 mm x 7 mm thick as in vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick cement plaster in CM 1:4, complete all as specified and directed.

M&L for 75 mm thick plain cement concrete, 1:3:6, type C-2 (using 20mm graded crushed stone aggregates) as in plinth protection including finishing surface even and smooth without using extra cement, complete all as specified and directed.

Vitreous china wash down closet pan (Pedestal pattern) white with ‘S’ trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe in fixed in repair etc complete all as specified and directed by Engineer-in-charge

S&F in repair 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet , ball valve , float and handle and brackets including taking out old one complete,complete all as specified and directed.

S&F vitreous china bowl urinal flat back size 465 x 355 x 265 mm white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed

Vitreous china wash basin, white, flat back, size 580 x 450 mm including brackets, cutting for and pinning in ends of brackets, waste pipe of suitable length with 32mm dia CP coupling fixed as in repair complete all as specified and directed.

S&F in repair 15 mm CP central hole basin mixer complete all as specified and directed

S&F 32 mm dia PVC waste pipe for wash hand basin/Urinal complete all as specified and directed

S&F PVC connecting 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

S & F 1000 Ltrs capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling of existing tank and including PVC float valve 20 mm bore , complete all as specified and directed.

Dismantling stone slabs and tiles of any description (wooden sports flooring) of any thickness in floors etc. complete all as specified and directed

S&F in repairs PVC (SWR) floor trap, with grating including joining to wase pipe in solvant for 75 mm bore including CP granting cover with or without hole complete all as specified and directed

M&L for providing wooden flooring for Squash court conforming to the requirement of MFMA(Maple Flooring Manufacturers Association) having performance standard DIN 18032 Par 2 also conforming to the standards specified by WSF(World Squash Federation). Using MFMA grade marked maple wood planks 60 to 85 mm wide, 21 mm thick in random length of 600 to 750 mm in tongue& groove shape & edges with finger grooves with & including the following: (a) The bottom of wooden floor shall drum machine sanded and provided with air pass groove & top shall be finished with lacquer finish using water based imported bona Tec, Non Skid polyurethane of approved make. (b) The floor shall be placed on wooden frame work of approved quallity wood9Fir/Spruce/pine) runners of size 70 mm x 45 mm placed at 300 mm c/c ( at perpendicular length to the top floor) applied with antitermite solution. The runners shall be provided with 18 mm thick cushoning pads (conforming to the sample kept in GE office) at 300 mm c/c duly stappled to the runners, the runners shall be placed on a vapour barrier of 600 Microns thickness on existing levelled PCC floor.

M&L for court game line marking of wall and floor with synthetic enemal paint as per required complete all as specified and directed

M&L for 50 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as a sub base for flooring finished even and smooth, complete all as spd and directed

S & F 30 mm thick solid core construction, with block board corer and both faces covered with decorative face veneer with liping frame with 2nd class softwood as in shelves of cupboard & cupboard shutter, complete all as specified and directed.

Preparation of old plastered surfaces of wall and applying two coats of cement base paint, complete all as specified and directed.

M&L for 75 mm thick plain cement concrete, 1:3:6, type C-2 (using 20mm graded crushed stone aggregates) as in sub base including finishing surface even and smooth without using extra cement, complete all as specified and directed.

M&L for old surffaces of walls and applying two coats of oil bound distemper on plastered surfaces preparatory to distempering and wall surface complete all as specified and directed

M&L machine pressed precast concrete interlocking tiles(with grey cement and pigment) (Colarado design) any shape and size confirming to IS-15658-2006 of 80 mm thick M-40 grade complete all specified and directed

M&L sand for 50 mm thick filling under interlocking paver block incluidng watering and consolidation complete all as specified and directed

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil, complete all as specified and directed.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed by Engr-in-Charge.

Removing excavated surplus material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation/coping /base filling and mass concrete in foundation of pole/stays etc, complete all as specified and directed.

M&L cement concrete type C-2 1:3:6 (using 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed

M&L for Brick work with subclass 'B' old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4, complete all as specified and directed.

Hard core of broken bricks of gauge not exceeding 63mm of gauge deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed

M & L for 100 thick PCC 1:4:8 type B-1 (using 20 mm graded crushed stone aggregate) as in floors finishes , complete all as specified and directed.

M&L for RCC 1:2:4(Normal mix) as in Slabs in floors, landing, blaconies , canopies, deck slabs and in the shelves complete all as specified and directed

Rendering 15mm thick cement plaster on other than fair faces of brick work CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 600mm bore dia reinforced cement concrete pipes, class NP-2, laid and jointed complete with collars, complete all as specified and directed by Engr-in-charge.

M&L for sand filling under floor or in foundation including watering and consolidation, complete all as specified and directed.

Taking down carefully aluminium conductor point wiring (light fan, socket and power) complete with fittings such as switches, sockets, lamps holder, utility light fitting, fan regulator etc and making good disturbed surface of walls and floors etc. and keeping in safe custody for taking credit, complete all as specified and directed by Engr-in-Charge.

Taking down ceiling fan any sweep, removing blades, cleaning the fan completly for dust and dirt and hanging the same back to its original position including connecting the 3 core flexible copper wire to ceiing rose etc after the completion the point wiring including replacement old unservicable fan hook, rubber pad, nut bolts and washers etc, complete all as specified and directed by Engineer in charge.

Taking down existing energy meters, keeping aside safely & refixing the same in its original position after making functional & after completion of point wiring/sub main wiring, complete, all as specified and directed by Engr-In-Charge. Note:- Small items required for fixing the electric energy meter at site shall be provided by the contractor and cost for the same shall be deemed to be included in the quoted rates.

Taking down existing electric water heater, keeping aside safely & refixing the same in its original position after servicing of the whole geyser/making functional and afer completion of wiring work, complete all as specified and directed by Engr-In-Charge. Note:- If any part found unserviceable during the refixing of water heater at site shall be provided by the contractor and cost for the same shall be deemed to be included in the quoted rates.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly, complete all as specified and directed for the following:-

(a) One light point controlled by one switch 5 Amp.

(b) One ceiling fan/exhaust fan point controlled by one switch 5Amp

(c) One socket outlet 5Amp controlled by one switch on same board.

(d) One socket outlet 5 Amp controlled by one switch on independent board.

(e) One bell point 5 Amp controlled by one bell push on independent board.

(f) One light point controlled by two, 2 way switche 5 Amp

All as per item No. 150.00 here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15 Amp switch on independat board.

All as per item No.151.00 here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one light point controlled by one 15 Amp switch.

S&F switch piano flush type 5 Amps single pole one way, complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type, complete all as specified and directed.

S&F switch socket combination 2 in 1 5 pin 5 /15 Amps flush type, complete all as specified and directed.

S&F of ceiling rose 3 terminal PVC/Polycarbonate isolated body, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required, complete all as specified and directed.

S&F bell push piano type 5 Amps complete all as specified and directed

S&F switch piano type 5 Amps 2 way complete all as specified and directed

S&F electric bell ding dong 230 volts AC complete all as specified and directed

S&F switch piano flush type 15 Amps single pole one way complete

S&F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in repair sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail, complete all as specified and directed.

S & F in repair Sheet metal enclosure double door for distribution board factory made for MCB DB load link TPN 4 way suitable for MCCB as incomer, 125 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification, complete all as specified and directed.

S & F MCB DP 63 Amps 10 KA 230 volts "C" series, complete all as specified and directed.

S & F MCB single pole 6 to 32 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.

S & F MCB single pole 40 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.

S & F MCCB 125 Amp, 4 Pole, 16 KA, 415 volts, with fixed magnetic and fixed thermal setting, complete all as specified and directed.

Sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6.0 sq mm as earth continuity conductor connected to commen earth and earth dolly including taking down existing old unserviceable cable, complete all as specified and directed

M&L for sheet steel box fabricated out of 2 mm thick steel sheet of size 60x60x25 cm duly painted by synthetic enamel paint over a coat of primer, compartmentalised suitable to accommodate 4 Nos energy meter independently each compartment shall be provided with suitable door and 2 Nos fancy lock including taking out existing wooden meter box complete all as specified and directed by Engr-in-Charge

S&F building security light luminaries energy saving and environment friendly long life LED light of 25 W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07, incluidng GI bracket light grade 25 mm dia, 1.2 m loing bend in shape fixed on wall having an angle 120 degree, fixed with and including two Nos 25x4 mm size flat mild steel clamp made to shape and suitable size nuts, bolts and washers etc, complete all as specified and directed

S&F MCCB 63 A 4 pole 16 KA 415 volt with fixed megnetic and fixed thermal setting complete all as specified and directed

S&F Integrel sleek extruded batten aluminium /CRCA channel fitting with LED 18 watt complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V 50 Hz etc, complete all as specified and directed

S&F Baton integrated LED channel of 5W, 230V frequency 50/60 Hz integral sleek extruded polycarbonate LED channel with white acrylic cover, Power Factor not less then 0.9 as complete all as specified and directed

S&F LED light fitting 1x9W bulk head luminaries IP 65 complete with all accessories including LED lamp 9 watt , connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V 50 Hz .etc, complete all as specified and directed

S&F Decorative wall mounted luminaire with & including 9 Watt LED lamp complete all as specified and directed.

S&F LED sleek surface round ceiling mounted decorative down light fitting with PC cover suitable for 2x12 watt complete all as specified and directed.

S&F LED flodd light luminaire of 80W with secondery optic made in pressure die cast housing and heat sink in aluminium extrusion with IP65 complete all as specified and directed.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion, complete all as specified and directed.

S & F MCB SPN 63 Amps, 10 KA, 230 volts 'C' series, complete all as specified and directed.

Sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 10 sq mm as earth continuity conductor connected to commen earth and earth dolly including taking down existing old unserviceable cable, complete all as specified and directed

S & F sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB SP 32/40 Amps, complete all as specified and directed.

Supply, laying, jointing and testing passing through pipe XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 70 Sqmm 3.5 core including taking down old cable, complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in any type of soil not exc 1.5m wide and n.exc 1.5m in depth for electric poles stay foundation and under ground electric power cables and getting out, complete all as specified and directed.

Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I, complete all as specified and directed by Engr-in-Charge..

M&L for Brick covering with width equal to length of brick as mechanical protection to cables with well burnt sub class ‘B’ (old size) bricks laid dry flat, complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs.52,094.50 during AOC Note:- Tenderers shall not quote for this Schedule

R.K. Works

RAJINDRA ENGINEERS & CONTRACTORS

M/s Khajuria Construction Co.