Dhule Indl.Area M and R to WSS maintenance and Retrofitting of staff quarters at MIDC Dhule with High Strength Fiber Glass Repair Mortar Thaemoset antifungal graft copolymer treatment ACPRS arresting leakages with non toxic thermoplastic treatment

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.

Chipping of all loose and Spalling of concrete to bottom of slab, beams etc.(wherever required), cleaning of reinforcement, carrying out thorough sand blasting, application of anti-corrosive zinc rich epoxy primer to exposed reinforcement including cost of material, labour, equipment, tools, scaffolding etc. complete.

Providing and applying one pack bonding coat between concrete members like RCC slabs, columns, beams, chajjas, pardis etc and cement mortar plaster using Hack Aid Plast of approved make & approved by Engineer in charge. Clean the concrete surface thoroughly to remove dust, dirt, grime, deshuttering oils and rub down to a clean surface. Apply Hack Aid Plast of approved make & approved by Engineer in charge by spray on the entire concrete surface. Provide a lean cement - sand dash coat over the same. Allow the dash coat to set for around 24 hours. Further plastering as per specifications can continue.

Providing weld mesh as per detailed specification in form of 50850812 SWG weld mesh to columns and beams and slab and anchoring it to the element with binding wire of GI plumbers, nails etc. complete

Providing and fixing chicken mesh made out of 22/24 gauge wire with openings of 25*25mm or less as approved over junctions of RCC brickwork or any other similar material, nailing the chicken mesh with wire nails at 200-250mm c/c prior to plastering etc. complete.

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing Repairing of honeycombs and minor damages with Polymer Modified Morter including material,labour complete in all respect.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and applying tactile quality acrylic/synthetic, semi viscous paste/plaster containing quartz aggregate acrylic polymer minerals specially formulated to withstand varying climate condition and provide a long lasting elegant look to the surface having very high aesthetic as well as protection value. Highly durable and maintenance free nontoxic and non-flammable 2 mm thick coating having PH value 8-9, specific gravity 1.7 kg/lit and hardness 4H.(Rates excluding GST)