SPL REPAIR TO EXTERNAL ELECTRIFICATION AT FD WKSP (SPL) AND SPL REPAIR (E AND M ) TO BLDG NO.T-84 OF SUP PT AT KHALSAR UNDER GE 873 EWS

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as perconditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down of MCB DB/TPNany type including MCB SP/SPN and making good of wall complete all as specified and directed.

M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engineer-in-charge.

All as per Srl Item No.3 above but for one light point controlled by one 5 Amps one way switch

All as per Srl Item No.3 above but for one 3 pin socket outlet 5 Amps on Same board

M&L point wiring for power point with 4.0 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed.

S&F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed.

S&F socket outlet 2–in–1, 3pin, 5A/6A (multipurpose) suitable for 2 pin/3 pin plug flush type complete all as specified and directed by the Engineer–in–Charge

S&Fswitch socket combination 2–in–1, 3pin, 6A (multipurpose) suitable for 3 pin/5 pin plug flush type complete all as specified and directed by the Engineer–in–Charge

S&F switch socket combination 2–in–1, 3 pin, 5/15 Amps, flush type (multipurpose) complete all as specified and directed by the Engineer–in–Charge

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F Rechargeable LED Bulb 9 W ,220 V, white color all as specified and as directed.

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 22W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size, complete all as specified and directed.

S&F LED light fitting 1X10W bulkhead luminaires incl LED light and driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.

S&F MCB 5 to 32 Amps 'B' curve 240V 50Hz 10 KA of single pole in the MCB DB, complete with connection testing and commissioning, complete all as specified and directed.

S&F MCB SPN 32 Amps 'C' curve 240V 50Hz 10 KA of single pole in the MCB DB, complete with connection testing and commissioning, complete all as specified and directed.

Taking up the existing cables from trenches of any size all as specified and directed.

Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 10 sqmm 2core complete all as specified and directed.

Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 16 sqmm 2core complete all as specified and directed.

Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 16 sqmm 4 core complete all as specified and directed.

Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 35 sqmm 3.5 core complete all as specified and directed.

Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 50 sqmm 3.5 core complete all as specified and directed.

Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 70 sqmm 3.5 core complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth for laying of cable, fixing of stay etc 10 Sqm on plan and n exc 1.5 in depth and getting out in hard/dence soil complete all as specified and directed by Engineer-in-Charge.

Returing, filling in incl spreading, levelling watering and well ramming in layers n.exc 25cm width, Complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above starting point Completed all as specified and diercted by Engineer-in-Charge.

Sand cushioning for under ground cable 8 cm before laying the cable and 15 cm after laying and streching the cable complete all as specified and directed by Engineer-in-Charge.

M&L Un-reinforced precast factory made concreate cable covers, class LV type-I, with flat size 250x150x40 mm Complete all as specified and directed.

Supply ,Install Testing & Commissioning of self supporting totally enclosed double door at front, LT feeder piller compartmentalised design, dust and varmin proof suitable for size 1200mm x 1000 x 60 mm ,415 Volt 3 phase 4 wire system made out of 3.15 mm thick CRCA sheet and built upon regid frame work having front and rear hinged doors with neoprence rubber gasket including danger plate, earthing strip point and, ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size of Zinc/Cromium plated and nuts, bolts and washers etc. The pannel shall be synthetic enamelled painted and the control circuit diagram shall be with colour code solid conductor copper 1.5 sqmm cable for easy identification including incomming/outgoing cable holes at the bottom, complete after taking down the old unserviceable one. The Panel shall be emmbeded with 45 x45x 5 mm MS Angle Iron frame and to be grouted with PCC foundation (1:2:4) type B2 upto a height of 600mm from normal ground level complete all as specified and directed by Engr in charge and comprising of the following. (i) LT Panel shall be openable from front and rear side. (ii) Double door type duly gasketed chamber. (iii) LT Panel dimensions 600mm X 600mm x 60 mm with cable alley for cable laying (iv) Each compartment shall have workable spacing as per IEC Rule IP-65 (v) Each LT cable should have MCCB Capacity. (vi) LT Panel should have 150mm under ground level,450mm should be above ground level.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on complete all as specified and as directed. Notes- 1. Earth strips & protection pipes lenth upto & including 7.5 m is deemed included in unit rate quoted by the contractor. 2. Earth filling shall be done by vegitable soil. 3. Soil shall be free from stone, boulders, aggregate, gravels.

S&F Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-22 (9 metres long), complete all as specified and as directed.

S&F Pin type, porcelain, vitreous, white,brown or green insulator includingone galvanised mild steel pindle, two galvanised iron washers and one galvanised iron nut, 150mm height, 150 mm dia for 11000 volts grade, complete all as specified and as directed.

M&L for aluminium conductor steel reinforced (ACSR) on pole stringing property on insulators and binding with aluminium binding wire jumper set complete for any size (Ferret,Wessal, squirel) of conductor, spacer complete all as speceified asn as directed. (Note: Measurement and payment shall be made by measuring horizontal distance between centre of two adjustant pole and adding 3% extra for sag joints and jumpers etc.)

Boring of holes under rods, pavement, hard standing by trenchless technologyusing ultra sounding technique & necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 Mpa working pressure.

Supply fabricating fixing structural mild steel channel angle iron and brackets etc for fabrication of Cross arms, bracings, supports,D-clamps and back plates fabricated from structural steel sectionsincluding nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete ( Insulator to be measured and paid seperately)

S&F light grade 80mm GI Pipe fix complete to Wall, pole etc with suitable clamp for protection of cable complete all as directed.

S&F light grade 40mm GI Pipe fix complete to Wall, pole etc with suitable clamp for protection of cable complete all as directed.

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate of pit for bed concrete in foundation of poles/stay complete all as specified.

M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregate in foundation of poles/stay complete all as specified.

M&L for PCC (1:2:4) type B2 using 40mm graded stone aggregate for coping of above ground level of Steel Tubular pole complete all as specified.

Supply ,Install Testing & Commissioning of self supporting totally enclosed double door at front, LT feeder piller compartmentalised design, dust and varmin proof of size 600 mm(Height) x 600 mm(Length) x 60 mm(Width) suitable for 415 Volt 3 phase 4 wire system made out of 3.15 mm thick CRCA sheet and built upon regid frame work having front and rear hinged doors with neoprence rubber gasket including danger plate, earthing strip point and, ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size of Zinc/Cromium plated and nuts, bolts ;and washers etc. The pannel shall be synthetic enamelled painted and the control circuit diagram shall be with colour code solid conductor copper 1.5 sqmm cable for easy identification including incomming/outgoing cable holes at the bottom, complete after taking down the old unserviceable one. The Panel shall be emmbeded with 75 x 6 mm MS Angle Iron frame and to be grouted with PCC foundation (1:2:4 ) type B2 upto a height of 50 cm from normal ground level complete all as specified and directed by Engr in charge and comprising of the following. Follow the Fwg :- (i) LT Panel shall be openable from front and rear side. (ii) Double door type duly gaskelted chambe. (iii) LT Panel dimensions 600mm X 600mm x 60 mm with cable alley for cable laying (iv) Each compartment shall have workable spacing as per IEC Rule IP-65 (V) Each LT cable should have MCCB Capacity (vi) LT Panel should have 150mm under ground level,450mm should be above ground level.

S&F cable jointing kit for 1.1 KV grade cable for straight throug heat shrink type, joint complete with jointing material and accessories suitable for 3.5 core XLPE, armoured, Al conductor cable of size 16 sqmm to 7 sqmm, complete all as specified and directed,

S&F of core PVC Insulated 10 Sqmm cable for connecting junction box and security, complete all as specified and directed,

M&L for GI Pipe (light grade,ISI Marked) 40 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all as directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable, complete all as specified and directed.

S&F Street light junction box of size 280 x 170 x 130mm Hinged (L), 1.6mm thick with Two way connector mounted on epoxy insulators for looping of cable for single phasew and internal fixed on pole with the hlep of ams nuts bolts and MS clamps - 2 Nos of size 40mmx4mm thick with noe no MCB SP 6 Amp capcity mounted on din rail inside box work also incudes making suitable hole in pole to take out connection to fitting if required at site ad povisioning of 10 sqmm 3 core flexibel PVC insulated copper cable from junction box to connector of street light , locking arrangement and rubber gasket including suitable luminum bus bar of size 25 x 3mm for four pole fixed on porcelain insulator. Make : Hensel/Sintex or equivalent

M&L for stay assembly complete with stay rod 20mm and accessories as shown in electrical plate N 1 including loop type insulator, stay clamps glavanised stay strand 7/4mm suitable for staying of pole (excavation and concrete measured separately ) complete all as specified and directed by Engineer-in-Charge.

Deduct Schedule of Credit of as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount.

M/S Chib Engineers (BID ID -3476804)

M/S MAHALUXMI BUILDERS (BID ID -3473956)

M/S Behl Sons (BID ID -3477296)

K S BUILDERS (BID ID -3473966)