REPAIR REPLACEMENT OF CERTAIN BR WORKS AND UNSV SPARE PARTS OF DG SETS POLES AT VARIOUS LOCATIONS UNDER AGE E M AND AGE B R I OF GE BENGDUBI

Amount

M&L for Providing, cement concrete 1:2:4 type-B1 in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and directed. (Pidiproof of Dr.fixit or equivalent)

M&L for brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with old size fly ash bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

S&F 2nd class HW rail and style 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) area not exc. 1.5sqm each, including cutting holes for removing the hold fast,making good disturbed surfaces and removing materials from site of work complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, including cutting holes for removing the hold fast, making good disturbed surfaces and removing materials from site of work complete all as specified and directed.

Taking down old unserviceable shutters of any description exc 1.00 but n.exe 2.00 Sqm each complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatm moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain/decorative colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement in the frame at site as per specification & drawing. etc complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing complete all as specified Make : Rajshree/Sintex/H2O solution. Note:-The door frame to be fixed to wall using 8 x 100 mm long anchor fasteners.

S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and direcetd.

S&F 100mm Butt hinges,medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 150mm size aluminium handle cast type complete all as specified and directed.

S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and directed.

M&L for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for MS framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Steel rolling shutters thickness of laths in 1.25mm, with ball bearing, as specified including top cover, an?choring rod, hasp and staple and one shop coat of primer; erected in position as indi?cated, complete: push pull or manual type with Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S&F steel window with side hunge shutters including projecting type hinges with steel handle and steel peg stey, tower bolts etc. complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F steel window with side hunge shutters including projecting type hinges with steel handle and steel peg stey, tower bolts etc. complete without glazing bars dovetailed or welded complete all as specified and directed.

M&L for 1.25mm thick pressed steel door frame of size 105mm x 60mm with one or more rebates including necessary fixing lugs , hinges, lock strike plate etc complete all as specified and directed.

S&F for 1.25mm thick pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc.complete all as specified and directed.

Dismantling of floor, hearth or wall tiling / Paving Blocks including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for sheet glass, 4mm thick, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete all as specified and directed.

M&L for preparation of untreated new wood/wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth including preparation of surfaces complete all as specified and directed.

S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and directed.

S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and directed.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20 mm dia bore complete all as specified and as directed

Dismantling water tanks and removing to store exc 250 ltr but not exc 500 ltr capacity complete all as specified and as directed

S&F rotational moulded PVC water storage tank 500 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top (thereated) including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc completge all as specified and directed.

S&F in repair fancy type stop valve/angle valve cast copper allow screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 15mm dia complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20mm bore and fixed as in repair complete all as specified and directed.

S&F in repair Ball brass valves, high pressure, with polyethene float and fly nut complete, screwed for GI pipe or brass ferrule of 20mm bore complete all as specified and directed.

S&F in repair PVC connections pipe ,15mm dia size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair 75mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repair 110mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends with rubber ring joints any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings,dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thickness( below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC type D2,1:4:8 using 40mm graded stone aggregate as in sub base of PCC floor complete all as specified and directed.

S&F Glass dividing strips, 3 mm thick and 38mm thick complete all as specified and directed.

M&L for Glazed ceramic tiles coloured 300mmx 450mm , 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface etc complete all as specified and and as directed

M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including screed bed or bedding layer 20mm thick in cement mortar 1:6 for laying floor finishes etc complete all as specified and directed

M&L for 40mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregates) as in flooring, rough finished for hard stading complete all as specified and directed.

M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including screed bed or bedding layer 20mm thick in cement mortar 1:6 for laying floor finishes etc complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size nconfirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 25mm thick sand filling layer well rammed and compacted complete all as specified and directed,

M&L for pre polished coloured cement concrete chequred tile size 300x300x25mmthick with grey cement and no pigment of approved quality thick on floors over and including 20 mm thick screed bed cement mortar 1:6 set and jointed in neat cement slurry and pointed with colour to match the tiles complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3 over/soffit of chajja/ceiling, finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in two layers 10mm +5mm in cement mortar 1:4 on external surfaces of brick work or concrete surfaces with using WPC finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured and paid separately under respective item of this schedule.

M&L for preparation of new undecorated surface of ceiling and applying two coats of white wash over a coat of alkai primer complete all as specified and directed.

M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distember (any tint) on walls complete all as specified and directed.

M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of cement based paint (any tint) on walls complete all as specified and directed.

M&L for newly plastered surface of wall and appying two coat of white or tinted oil bound distemper over one coat of alkali resistant primer complete all as specified and directed.

Hacking out old broken glass (any thickness size quality and discription) for metal frame exc 1.5 sqm including punching, drilling out old glazing pins / spring clips and providing new ones complete all as specified and directed.

S&F in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed.

S&F in repair Vitreous china wash down water closet European type (pedestal pattern) (excluding flushing cistern and flush pipe) Seat and cover for pedestal pan including connection to outgoing pipe and seat cover and flushing pipe complete all as specified and directed.

S&F in repairs 10 lits capacity PVC flushing cistern low level, white, with inlet, ball valve, float and handle and flush pipe including brackets etc complete.

S&F in repair vitreous china wash hand basin in repair oval special type 510x410mm including CP fancy type 15 mm pillar taps including 32mm dia PVC waste pipe, and 32 mm dia brass CP waste coupling complete all as specified.

S&F in repair Health faucet (ABS Body) mild steel CP suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connection and fixed in position complete all as specified and directed.

S&F 2nd class hard wood 30 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and directed.

Opening of Front loading type washing machine of capacity 50 kg and dismantling unit after disconnection of electrical /steamline and taking out of the shaft, pully with others spares for carryout inspection of all bearing, bush, coupling, pully and overhauling the same, rectification the defects including repacement of unserviceable spare parts and assembling the same for smooth running after apply approved grade of grease , gasket nut bolt washer etc.complete all as specified and directed. NOTE : Spare required will be measured under separately under respective item of this schedule.

All as per item 70 here-in-before but for Hydro extractor top loading type of capacity 25 kg

All as per item 70 here-in-before but for Dry Tumbler front loading type of capacity 50 Kg

Supply only the following spares for washing machine/sluicing machine/drying tumbler/Hydro Extractor/Flat bed press including removing unserviceable old one complete all as specified and directed.

Solenoid coil AC 220/230 Volt AC 50 Hz 15 W (Make: BCH/FLOCON or equivalent

Solenoid break coil AC 220/230 volt, 50 Hz (Make: BCH, type SP50MC21)

Ball bearing No. 6206 ZZ including taking out old one (Make - SKF/TATA/ Timken India Ltd.

Ball bearings No 6306ZZ with water seal cover, nut, bolt, jum nut, bearing socket. (Make: SKF/TATA/Timken India Ltd.

Ball bearing No. 6209K with water seal cover nut, bolt, jum nut, bearing socket.(Make: SKF/TATA/Timken India Ltd.

Door gasket set heat proof 25mm x 25mm size with fixing solution.

High tension stainless steel compressed spring 6" long 1" dia.

Cotton padding with nylon ribbon for binding of size 8 mtr x 1.8 Mtr including cutting/streching.

Cotton padding for Flat bed Press

V-Belt, size B-100 (Make - Fenner/Nirlon/Optibelt Corporation).

V-Belt, size B-73 (Make - Fenner/Nirlon/Optibelt Corporation).

V-Belt, size B-70 (Make - Fenner/Nirlon/Optibelt Corporation).

V-Belt of size A-54 /A-62 (Make - Fenner/Nirlon/Optibelt Corporation).

Timmer (0-15/0-60), 120/250V (Make - DIEHL Germany/L&T/or Equivalent).

Over load relay 4-6 Amp/6-10 A type ML (L&T/Siemen/BCH) with copper wire/lug/socket for connection.

Power contactor type ML 1.5 (L&T/Siemen/BCH) with copper wire, lugs, socket for connection.

Push button ON/OFF (Make - L&T/Siemen/BCH).

P.U Tube (6mm x 8 mm) with flare nut of length 1.5 mtr for flat bed Press

Stainless steel shaft (As per sample) with Key, key gud for Hydro/washing Machine

Power contractor NHD 25 A 4 pole coil voltage 415 V 50 HZ (Make : L&T/Siemen/BCH)

Auxillary contract block for NHD 25

Ruber Hose mounting bush cone type for Hydro extractor machine ( Botton 13.5 cm x Top 11.5 cm x Height 9.5 cm Aprox)

S&F Safety relief valve Bronze 25mm Angle type 150-250 PSI (Make: Neeta or Equivalent) as per IBR including necessary fittings complete all as specified and directed.

S&F main contactor 415 V 50 Hz 40 Amps complete all as specified and directed. (Make : L&T/Siemen/BCH)

Disconnection the main electrical connection from LT pannel board of Boiler plant and removing old/unserviceable electrical wires of sizes and rewiring of LT pannel board complete with PVC 2.5 / 4 / 10 sqmm copper wire 1100 volts FRLS with suitable copper plugs, clips and cable conection complete all as specified and directed.

Supply and replace Rope Asbestos 8mm square for RXA -06 complete all as specified and directed.

Supply and replace solenoid coil 220 volt AC 50 Hz, 1.5 Watt taking out old one complete all as specified and directed. (Make : BCH/BB Pneumaties or equivalent )

Supply and replace Magnetic coil 220 volt AC after taking out old one complete all as specified and directed.

Supply and replace packing Asbestos for photocell base for RXA -06 complete all as specified and directed.

Supply and replace oil seal (85-102-11) for Hydrolic Air Piston complete all as specified and directed.

S&F steam globe stop valve 50mm dia screw type with hand wheel including necessary fitting suitable for steam line after taking out old one. Make - Zoloto/Neeta

S&F steam globe stop valve 25mm dia with hand wheel including necessary fitting suitable for steam line after taking out old one complete all as specified and directed.Make - Zoloto/Neeta/Sant

S&F steam globe stop valve 20mm dia screw type with hand wheel including necessary fitting suitable for steam line after taking out old one complete all as specified and directed. Make - Zoloto/Neeta/Sant

Dismantling and taking down the existing electrical induction motor 3 Phase 415 volt of capacity 5 HP from base drive pully after disconnecting all electrical connection, striping out the motor complete for overhauling, servicing the motor winding by any hot compressed air and cleaning the winding with thinner and apply two coats of antimoisture heat resistance insulating varnish and drying up, cleaning the rotor and stator, replacement of defective parts such as bearing, terminal plate and reassembling the motor and refitting the same for smooth running of the machine complete all as specified and directed. Note:-spares parts for repair will be measured and paid separately under respective item of this schedule.

All as per item No. 85 here-in-before but capacity 3.00 HP.

All as per item No. 85 here-in-before but capacity upto 2.00 HP.

All as per item No. 85 here-in-before but capacity upto 1.00 HP.

Dismantaling the steam coil assemly of dryer Machine and supply & fixing of suitable steam coil assembly after taking out old one and testing complete all as specified and directed. Make - ICL or equivalent)

S&F Globe type non return valve bronze 15mm BSPT bore with necessary fitting suitable for steam line after taking out old one complete all as specified and directed. Make - Zoloto /Neeta/Sant)

Supply and replace diffuser plate 132mm dia for RXA-06 after taking out old one complete all as specified and directed.

Dismantaling of mutiport valve for water softener plant and S&F newmulti port valve up flow type US 8 and testing after taking out old one complete all as specified and directed.Make : Initiative or equivalent)

S&F metallic braded rubber hose of size 25 mm, length 1.2 mtr for inlet water line including fittings, clamp after taking out old one complete all as specified and directed.

S & F water Softmer unit type US-8 or equivalent for boiler RXA-06 Boiler Plant with necessary connection with the existing system complete all as specified and directed.

Dismantling of old exoist line of Boiler and modification of exoist line by providing new M.S. Steam pipe class 'C' tata 6 mtr of size 40 mm with necessary flanges , nut washer complete for smooth pairing of steam complete all as specified and directed.

S & F Brass Steam ball valve of size 65 mm dia including necessary bend, Elbow, nipple & socket as approved complete all as specified and directed.

S & F Metallic braded Ruber Hose 20 mm dia of length 45 cm complete all as specified and directed.

S & F Sheet metal encloser SPN with two pin earth plug and socket complete with one SP MCB 20 Amp 240 V including dismentling old one complete all as specified and directed.

Supply and fixing limit switch 10 Amps, 500 VAC 0.8A, 250 VDC with 1 NO + 1 NC including taking out old one complete all as specified and directed. Make : Essen or equivalent.

Dismantling Steam Boiler for overhauling and taking out of all electrical connection and steam line, lifting up steam coil by chain pulley system with other spare parts for inspection and descalling of boiler coil innertube by cleaning agent and decorbonise the same for proper passing of steam and overhauling of waterpump, fuel pump and replace the unserviceable spares including steam Gasket/Asbestose rope/Grasse/engine oil and connection for smooth running complete all as specified and directed. Note : Spares required will be measured and paid under respective item of this schedule.

Supply only the following spares for Boiler machine RXA-06/Water Pump /Softener/ Fuel Pump including removing unserviceable old one complete all as specified and directed.

Gland washer for water pump.

Valve set assembly for water pump.

Teflon washer (set of three) for pump.

Oil seal for fuel pump

Oil ring for fuel pump/water pump.

Packing retainer for pump/Boiler

High pressure Metallic braded rubber hose 1/2" x 1 mtr long.

Pressure switch for steam boiler with necessary brass fittings/copper wire for connection as per existing Make. - Pressostat/Indfoss.

Pressure gauge 0-10/0-25/0-42(l) Pre Kg , 63mm dia 1/2 " BSP (Make: APEX/KI/equivalent) with adopter.

Dial thermometer 0-400 deg celcius /0-600 deg celcius, 100 mm dial 1/2" BSP back connection. (Make: Appex/Equivalent).

Dial Thermometer 0-120 Deg.C. 63mm dia 1/2" BSP (Make: APPEX/or equivalent. With stem.

Filter element for Y type strainer made of Brass net

Taking down motor 5 HP 415 volts after disconnecting all electrical connection nut, bolts from base plate and transportation to repair workshop and dismantling the motor stator, removing worn out copper winding, cleaning the stator and rewinding the same with super enamelled copper wire of existing size and specification and vernish the same with antimoisture heat resistance including varnishing and drying up slowly and including replacement of all types insulating tape, terminal plate, cable socket etc and reassembling the same, transporting to site for refixing in existing position for smooth running complete all as specified and directed.

All as per item No. 102 here-in-before but capacity 3.0 HP capacity motor.

All as per item No. 102 here-in-before but capacity 2.00 HP.capacity motor.

All as per item No. 102 here-in-before but capacity 1.00 HP.capacity motor.

Dismantling/removing of ID/FD fan motor after disconnecting all electrical connection, nut /bolts etc from its base, stripping out the motor and blower for repair/overhauling including varnish, greasing after servicing the motor winding, cleaning the rotor stator and reassembling the same and refixing it for smooth running complete all as specified and directed.

S&F Solenoid valve 5/2 way, 220 V, AC 12/15 watt, pressure 2-10 Kg/Sqcm media - Air, 1/4" BSP connection complete all as specified and directed.(Make: SMSN/Airchamp or equivalent).

S & F FRL combination type ARC-2000, PT - 1/2" max.pressure range 0.5 - 8.5 Kg f/cm square temperature range 5 - 60 degree celcius with brass nut for connection complete all as specified and directed. (Make: SMSN/Airchamp or equivalent).

S&F panel indicator lamp LED type including taking out old one any type complete all as specified and directed.

S&F PVC insulated three core copper flexible wire of size 2.50sqmm 1100 volts grade including taking out old one complete all as specified and directed.

S&F heating coil round type with porcelain bit cover of length 1.0 mtr 1500 watt 220 V with necessary connection, brass nut bolts complete all as specified and directed.

S&F roller bearing No. UC-213/208 with bearing bush, block nut, bolts washer complete after taking out old one complete all as specified and directed.

S&F timer motorised auto reverse with synchronous motor type ME-7991, 220 volt 50 Hz, 3 W speed including taking out old one complete all as specified and directed.

S&F MCB SP of capacity 6 - 32 amps 'C' series including necessary cable socket plug etc after taking out old one complete all as specified and directed.

S&F MCB TPN of capacity 16 - 25 amps 'C' series including necessary cable socket lugs etc after taking out old one complete all as specified and directed.

S&F MCB TPN of capacity 40 amps 'C' series including necessary cable socket lugs etc after taking out old one complete all as specified and directed.

S&F PVC flexible pipe 25 mm dia for cable protection including necessary clamps, screw etc.complete all as specified and directed.

supply and replace GI pipe size 15mm dia Medium grade with all fittings complete all as specified and as directed

supply and replace GI pipe size 25mm dia Medium grade with all fittings complete all as specified and directed

S & F Toggle switch 10/15 Amp ON/OFF/ON after taking out old one complete all as specified and directed.

M&L for repair to pipe joints/flange joints machinery body welding with necessary fittings/packing by bronze stick with gas /electric welding set including lathe job if any required to proper shape & finish complete all as specified and directed.

S&F single core copper flexible wire of size 2.5sqmm including necessary cable lugs etc after taking out old one complete all as specified and directed.

M&L for Scrapping old paint and removal all rust with wire brush including welding wherever required and applying one coat of red oxide on bottom of boiler with chimney-(02 Nos) and applying two coat of heat resistance aluminium paint (Ist grade) upto the top of the chimney including inside portion of plant room of size Approx 10'x10' location at base hospital complete all as specified and directed.

Dismantling all connection of oil service tank and drain out used residue sludge oil, cleaning all dirty foreign materials and scraping old paint and removal all rust with wire brush and apply two coat of synthetic enamel paint over a coat of red oxide, primer and re-connection of all lines complete all as specified and directed.

Dismantling PT pump assy from 750/1010 KVA DG set any make of engine for repair, cleaning, service/ overhauling of pump assy with necessary calibration including replacement of spares as required complete all as specified and directed. Note:- Spares shall be measured and paid separatelyunder respective item of this schedule.

Dismantling PT pump assy from 75/82.5/100/110/160/180/200/250 KVA DG set any make engine for repair, cleaning, service/ overhauling of pump assy with necessary calibration including replacement of spares as required complete all as specified and directed. Note:- Spares shall be measured and paid separatelyunder respective item of this schedule.

Dismantling PT pump assy from 7.5/10/12/15/30/31.25/35/40/50/62.5 KVA DG set any make engine for repair, cleaning, service/ overhauling of pump assy with necessary calibration including replacement of spares as required complete all as specified and directed. Note:- Spares shall be measured and paid separatelyunder respective item of this schedule. (spares which are required to replace shall be measured and paid separately).

Supply only the following Parts for incorporated to the ireapir of PT pump assembly complete all as specified and directed.

Part No. 3239599 valve solenoid

Part No. KIT BM-68356 kit Gasket Governer set

Part No. 102974 hub spline coupling

Part No. AR-41043 Weight carrier

Part No. 3034243 pump Gear fuel

Part No. BM - 28848 drive Tachometer

Part No. 3170813 Screw, socket set.

Part No. 203850 Union Male

Part No. 100192 Shaft fuel pump Drive.

Part No. 104087 Shaft tacho meter Drive.

Part No. BM-75531 Drive Governer.

Part No. 146483 Screen filter

Part No. 68174 Key square.

Part No. 3879347 Governer barrel

Part No. S-1650 Bearing ball

Part No. 3010937 Seal 'O' ring.

Part No. 70723 Bushing Tacho meter drive.

Part No. 101981 Gear tacho meter Drive.

Part No. 3030970 Disc Valve.

Part No. 104747 Plunzer Fuel Control.

Part No. BM-30680 Shaft throttle

Supply only lubricating oil grade 20W40 complete all as specified and directed. (Make - HP/Servo/Castrol)

Supply only anti freeze radiator coolant complete all as specified and directed. (Make-HP/Servo/Castrol

M&L for cleaning the fuel tank both internally and externally by removing all the dust / sediments etc including writing of tank capacity, Date of cleaning, and next due date for tank to be cleaning for various capacities of DG Set complete all as specified and directed.

Taking out self starter 12/24 volt from the DG Set, transportation to workshop opening/disconnecting all internal connection, cleaning the same taking out burnt armature, segrigation of serviceable parts for re-use, rewinding of armature with copper wire of existing size. Reassembling the same with replacement of of carbon brush 01 set, Beadex pinion 01 no, Half clutch assy 01 No, Field coil 01 No, solonoid switch 01 No commitator 01 nos and refixing the self starter on the engine at site and testing on completion complete all as specified and directed.

Taking down the unserviceable radiator for 75/82.5/100/110/160/180/200/250 KVA from engine, transportation to the workshop dismantling the radiator, repair the tank /storage portion incl necessary welding & making leak proof of the tank, cleaning the complete radiator with chemical agent and pumping set incl replacement of defective copper core and assembling the radiator including replacement of all old rusted MS nuts, bolts washers & gasket sets including refixing in to the existing position & on the engine and testing complete all as specified and directed.

Taking down the unserviceable radiator for 7.5/10/12/15/30/31.25/35/40/50/62.5 KVA from engine, transportation to the workshop dismantling the radiator, repair the tank /storage portion incl necessary welding & making leak proof of the tank, cleaning the complete radiator with chemical agent and pumping set incl replacement of defective copper core and assembling the radiator including replacement of all old rusted MS nuts, bolts washers & gasket sets including refixing in to the existing position & on the engine and testing complete all as specified and directed.

Inspection for finding out defects of Fully Automatic Electric panel of DG set and Taking out burnt interconnection wiring including u/s and serviceable components for reuse including Rewiring of panel using existing size of copper cable, ferrule, lugs, insulating material, nut bolt washer of various sizes refixing serviceable items testing complete all as specified and directed. NOTE :- Spares required will be measured and paid under respective item of this schedule.

Supply only Contactor 3-Pole Type MNX 50 Coil 240V 50 Hz/288V 60 Hz complete all as specified and directed.Make: Cat No CS97075BOOO L&T/Siemen/BCH

Supply only Contactor 4-Pole Type MCX 22/32 AC 1:100/160 A, Coil 240V 50 Hz, complete all as specified and directed.Make: Cat No CS97075BOOO L&T/Siemen/BCH

Supply only Copper Lugs up to 50sqmm cable size for Electric panel complete all as specified and directed.

Inspection and finding out defects of 160/180/200/250 KVA Kirloskar/Crompton Greaves Electric Alternator including taking out burnt AVR,Glass Fuse and Diode and Supply and fixing Automatic Voltage Regulator Model. IEVR-2 Make KEL, Qnty.01, Diode as per existing size & capacity Qnty.06, Glass Fuse 2amps, Qnty.01 incuding wiring and and testing of DG Set complete all as specified and directed.

All as above item no 142 here-in-before but 30/40/50/63/75/82.5/100/110 KVA

Disconnecting negative and positive terminal from Self Starter of DG Set and lead acid power unit 25 plate, 180 AH, Heavy Duty, taking out and further trasportation to work shop and back for repair.Inspection finding out defects, carefully dismentaling the power unit taking out serviceable and unserviceable components, keeping aside serviceable items for reuse. Repair/replacement of Grid plate, Positive/Negative plates and Cell Connection, Microporus Separator, Positive/Negative pole with Electrolyte sealing ring complete refixing with servicable items sealing the top with compound and testing complete all as specified and directed.

All as per item No. 144.00 here in before but 60 AH to 100 AH KVA DG Set.

Taking out burnt rectifier assy from alternator of 160/180/200/250 KVA DG Set and supply and fixing rectfier assembly (set of three) including cleaning of existing winding of alternator and testing complete all as specified and directed.

All as above item No 146.00 here-in-before but 75/82.5/100/110 KVA capacity

Taking out of u/s carbon bush and carbon holder and alternator incl supply and fixing new carbon bush and holder cleaning & repairs to alternator for smooth functioning of slipring assembly of 160/180/200/250 KVA capacity complete all as specified and directed.

All as per item No. 148.00 here in before but 50/62.5/63/75/82.5/100/110 KVA DG Set.

Inspection of DG set 160/180/200/250 KVA finding out defects, draining of oil dismantling and taking out cylinder head, CR bearing, fule line, rocker, piston, ring, liner, radiator, Turbo, manifold, CR rod, cooling system, controls etc. Inspection segregating u/s component and serviceable components for re-use further repair /re-conditioning /cleaning/ machining lathe work, resurfacing, re-assembling and re-fixing the same with new and repaired component, setting, adjustment and filling of oil, commissioning and testing complete all as specified and directed. NOTE :- Spares required will be measured and paid under respective item of this schedule.

All as per item No. 150.00 here in before but 50/62.5/63/75/82.5/100/110 KVA DG Set.

All as per item No. 150.00 here in before but 7.5/10/12/15/30/31.25/35/40 KVA DG Set.

Taking out cylinder head assy of 100/110/160/180/250 KVA DG Set transportation to Siliguri workshop for repair and back, further dismantling and taking out u/s valves, valve seat, guide, sleeve etc cleaning, machinery, lathe work, boring, resurfacing and fixing new parts testing complete all as specified and directed. NOTE :- Spares required will be measured and paid under respective item of this schedule.

Dismantling of injector assembly of 75/82.5/100/110/160/180/200/250 KVA of any Make - DG Set for repair, cleaning and overhauling of the same with necessary calibration including replacement of necessary repair as required sent at Kolkata and back complete all as specified and directed. NOTE :- Spares required will be measured and paid under respective item of this schedule.

Supply only Part No. 3880781 kit for 75/82.5/100/110/160/180/200/250 KVA DG set Injector repair for incorporated to the injector assy.

Dismantling of injector assembly of 7.5/10/12/15/30/31.25/35/40/50/62.5 KVA of any Make - DG Set for repair, cleaning and overhauling of the same with necessary calibration including replacement of necessary repair as required sent at Kolkata and backcomplete all as specified and directed. NOTE :- Spares required will be measured and paid under respective item of this schedule.

Supply only Part No. 3880781 kit Injector for 7.5/10/12/15/30/31.25/35/40/50/62.5 KVA DG set repair for incorporated to the injector assy.

Inspection of 750 KVA to 1010 KVA any make DG Set at finding out defects, cleaning dismantling repair/reconditioning including, draining lube oil and refiling with new lub oil replacement of Oil Filter, Diesel Filter, Air Cleaner Filter, adjusting valve tappet clearence/timing, injector pressure test cleaning and repairing,tightining fasteners and making lubrication leak proof,repair/rewiring of broken/damaged control panel connection including measuring instruments, indicators,engine protection devices etc. reservicing of the complete DG set testing complete all as specified and directed. NOTE :- Spares/Lube Oil required will be measured and paid separatelyunder respective item of this schedule.

All as per item No-158.00 here in before but 200 KVA to 250 KVA DG Set.

All as per item No-158.00 here in before but 160 KVA to 180 KVA DG Set.

All as per item No-158.00 here in before but 75 KVA to 110 KVA DG Set.

All as per item No-158.00 here in before but 50 KVA to 63 KVA DG Set.

All as per item No-158.00 here in before but 30 KVA to 45 KVA DG Set

All as per item No-158.00 here in before but 15 KVA to 20 KVA DG Set.

Supply only the following Parts for incorporated to the items No. 158.00 to 164.00 complete all as specified and directed. Make - Cummins/Crompton greaves or equivalent.

Part No. 70855 Connector female.

Part No. 108692 Gasket Valve cover.

Part No. 114753 Gasket turbo to Exhmanifold

Part No. 200817 Gasket Fuel pump & copr.

Part No. 3801096 Kit Turbo repair

Part No. AK-4030 MS hose flexible

Part No. 63495 hose plain

Part No. 43828 D clamp for hose.

Part No. AK-6065ST hose flexible

Part No. BM-30075 Conn. Fuel drain.

Part No. 104536 Seal ferrule

Part No. 503010 Element air cleaner.

Part No. 3020943 Gasket exhaust mainfold.

Part No. 194504Switch Pressure saftey control (LOP)

Part No. 194505 Switch temperature safety control.

Part No. 3166497 Pump Water

Part No. 9097 Gasket WP.

Part No. 500188 Hour meter cable Cable flexible Drive.

Part No. 500412 Temperature Guage

Part No. AK-6054 ST Hose turbo supply Flexible

Part No. 3030790 Hump hose.

Part No. 178627 Belt V Fan.

Part No. 64998-H Hose Plain CR.

Part No. 501151 Hour meter.

Part No. 3026556 Thrust washer bearing.

Part No. 106339 Oil Seal Assyy drive.

Part No. Kit 3238529 "B" Check Kit NT495

Part No.135675 Thermostate

Part No. 102229 Gasket Thermostat housing.

Part No. 128067 Spacer bearing.

Part No.3007241 Seal 'O' ring piston cooling .

Part No.Kit 3238528 'B' Check kit NT/NTA.743

Part No. AK-6045-ST By Pass Hose Flexible.

Part No. AK-6072SS hose flexible.

Part No. 123716 Crank case Element Breather.

Part No. Kit 3238523 "B" Check Kit N495

Part No. 194505 Water Control Safety (HWT).

Part No. AK16019 Hose.

Part No. 500109 Gauge Pressure.

Part No. 503473 Cable Flexible Drive.

Part No. 125658 Retainer 'O' ring.

Part No. 133190 Gasket.

WP kit.

Part No. 669121A Fan adjusting bolt.

Part No. 500108M Water Temp Gauge

Part No. 500109 Pressure Gauge

Part No. 64998G CR hose.

Part No. AK 160236 MS hose.

Part No. 504975 Starting switch.

Part No. 68138 Adoptor vent hose.

Part No. 505062 Hose coolant.

AK 10070 MS hose fuel tank.

Part No. AK 8065 MS hose injector return.

Part No. AK 10015 MS Hose fuel filter.

Part No. BM50745 Head Gasket set

Part N o. 150288 Valve inlet

Part No. 144911 Valve exhaust

Part No. 66890 Valve guide

Part No. 69965 Valve seat

Part No. 89012 Sleeve Injector.

Part No. 3099083 Gasket oil chamber

B Check Kit for 250 KVA DG Greaves Cotton DG Set

Part No. 3012538 Injector cup

B Check Kit for 82.5 KVA DG Set

B Check Kit for 750 KVA DG Set

B Check Kit for 1010 KVA DG Set

Supply and fixing Battery terminal cable , copper conductor multi strand, unsheathed, single core 25sqmm, 1.5 mtr long each for negative and positive terminal fixed/solder with battery terminal clamp and copper lugs each side of cable suitable for 180 AH Battery (Set of 2 Nos.) complete all as specified and directed.

Taking out turbocharger from the DG set 75/82.5/100/110/160/180/200/250 KVA, transportation to work shop for repair, including dismantling the same cleaning and carrying out inspection of each components/spares segrigation of serviceable spares for reuse including providing required defective parts, Decarbonising machine, cutting, grinding polishing etc and re-assembling the Turbocharger with replacement of spare parts and refixing on existing position complete all as specified and directed.

S&F in replacement digital Ammeter 3 phase LED display class 1 for measuring alternating current of range : 0 - 200 A flush type complete all as specified and directed.

S&F in replacement digital Voltmeter for measuring alternating current voltage of range 0-500 V flush type 96x96MM size complete all as specified and directed.

S&F in replacement LED indicator - R/Y/B/G 240 V AC complete all as specified and directed.

M&L for preparation for old rusted steel surface of feeder pillar box/LT panel of any size ,applying one coat of synthetic enamel paint as per the existing pattern above the PCC and black paint on legs of feeder pillar/LT panel and cutting vegetation growth all around and on the feeder pillar box/panel board upto 1 mtr apart from feeder pillar all around complete all as specified and directed.

S&F in repairs MCCB 100 Amps 4 pole, 415 V, breaking capacity 16 KA,Ics=100% ICU including spreader terminals & connected accessories complete all as specified and directed.

S&F in repairs MCCB 160 Amps, 4 Pole, 415 V, adjustable type, with breaking capacity 25 KA, Ics=100 % ICU including spreader terminals & connected accessories complete all as specified and directed.

S&F in repairs MCCB 200 Amps, 4 Pole, 415 V, adjustable type, with breaking capacity 25KA,Ics=100 % ICU including spreader terminals & connected accessories complete all as specified & directed.

S&F in repairs MCCB 250 Amps, 4 Pole, 415 V, Adjustable type, with breaking capacity 25 KA, 100 % ICU including spreader terminals & connected accessories complete as specified & directed.

S&F in repairs MCCB 320 Amps, 4 Pole, 415 V, adjustable type, with breaking capacity 36 KA, Ics=100% ICU including spreader terminals & connected accessories complete all as specified & directed.

S&F in repairs MCB 63 Amps, 4 Pole, 415 V, adjustable type, with breaking capacity 10 KA, 100% ICU including spreader terminals & connected accessories complete all as specified & directed.

S&F in repairs on load changeover with handle in enclosure 100 Amps, 4 Pole, 415 V, AC, 50 Hz complete all as specified & directed.

S&F in repairs on load changeover with handle in enclosure 200 Amps, 4 Pole, 415 V, AC, 50 Hz complete all as specified & directed.

S&F in repairs on load changeover with handle 200 Amps, 4 Pole, 415 V, AC, 50 Hz complete all as specified & directed.

M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in lean concrete in foundation of poles, filling and mass concrete , stay assembly, etc, including formwork( as / if required) complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in coping of poles, including necessary formwork ( as / if required) complete all as specified and directed.

Excavation in trenches in any type of soil not exc 1.5 m wide and n.exc 1.5 m in depth for laying of cable and fixing poles, stays etc and getting out in soft/loose soil complete all as specified and directed.

Returning,filling in including spreading leveling, watering and well ramming in layers not exceeding 25 cm thick with excavated soil complete all as specified and directed.

Removing excavated material (surplus soil) to a distance not exceeding 50 mtrs and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M&L clean dry sand in trenches/ ducts for cushioning to cable 8cm below the cable and 15cm above the cable and compacted thickness 18cm complete all as specified and as directed.

Supply & laying Sub-Class old size B bricks, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion laid for UG cable protection complete all as specified and directed.

Relaying of old serviceable brick as in cable protection complete all as specified and directed.

Taking out old unserviceable under ground cable of size upto 200sqmm, any position forn trenches, floors and wall and serviceable cable for reuse complete all as specified and directed. Note:- Earth work,shall be measured and paid separetly under respective item of this schedule.

Relaying of serviceable cable retrieved from srl item No-190 here-in-above after detecting the fault and making straight through jointing kit of LT 440 volt under ground system of LT feeder/location of size 6 Sqmm 2 core to 16Sqmm 2 core complete all as specified and directed. Note:-Necessary excavation,returning filling,removal of soil and necessary straight through joint shall be measured and paid separately under respective item of this schedule.

Relaying of serviceable cable retrieved from srl item No-190 here-in-above after detecting the fault and making straight through jointing kit of LT 440 volt under ground system of LT feeder/location of size 16 Sqmm 4 core to 70Sqmm 3.5core complete all as specified and directed. Note:- Necessary excavation,returning filling,removal of soil and necessary straight through joint shall be measured and paid separately under respective item of this schedule.

Relaying of serviceable cable retrieved from srl item No-190 here-in-above after detecting the fault and making straight through jointing kit of LT 440 volt under ground system of LT feeder/location of size 95 Sqmm 3.5 core to 200sqmm 3.5 core complete all as specified and directed. Note:-Necessary excavation,returning filling and removal of soil shall be measured and paid separately under respective item of this schedule.

Supply and laying insulated, armoured, heavy duty electric cables with aluminium conductor 1100 volts, cross sectional area 6sqmm 2 core laid in trenches/ through pipes/ducts or on pole/wall/floor jointing to OH conductor, LT panels, main switch with cables size aluminium lugs and testing complete all as specified and directed. Note:- Earth work,shall be measured and paid separetly under respective item of this schedule.

All as per items No 194 here-in-before but 10Sqmm 2 Core

All as per items No 194 here-in-before but 16Sqmm 2 Core

All as per items No 194 here-in-before but 16Sqmm 4 core

All as per items No 194 here-in-before but 25Sqmm 4 core

M&L for surface dressing averaging 15cm depth in soft/loose soil for cleaning and cutting /removal of green vegetation in and around the installations and removal of the soil outside of the installation including spreading thin layer of anti vegetation chemical to prevent abnormal growth of grass/bushes complete all as specified and directed.

Cutting and trimming of tree branches of any grith all around the LT over head lines upto 2 mtr from all around the over head lines complete and removing the cut branches from the site to a distances not exc 50 mtr complete all as sprcified and directed.

M&L for painting of LT steel tubular pole (9/11 mtr long) any type or size externally above foundation including all MS work with one coats of aluminium paint after scrapping / clearing well the existing surface complete all as directed and specified. Note:-The above work includes painting of 3 Nos black & 02 nos yellow bands width 30 cm by fluorescent paint in alternate layers upto 1.5 mtr height above foundation / plinth block)

M&L for repairs to main electrical panel at sub stations by tightning all loose connections of the cable ends & replacing the damaged/US/burnt aluminium lugs of required sizes, insulating/secure the weak insulated portin of cable ends inside the panel by taping with good quality of insulation tape, clean the dust by air blower complete all as specified and directed.

Restringing of each OH conductor with to permissible sag rebinding to insulators with new wire where cut point jumpers to be higher size of the OH conductor complete all as specified & directed.

Horizontal boring using ultra sound technique/any other suitable mechanical means at approx 1 metre below the road, pavement, hardstanding etc without damaging the existing surfaces getting out & disposal of soil to a distance not exceeding 50 metre from the site of work complete all as specified and directed.

Supply and fixing in replacement of semi-integrated solar LED street light system including MPPT charge controller with dimming up-to 50% after 5 hrs with aluminium die cast housing dusk to down system & including battery LiFePO4 20 AH 12.8V complete all as specified and directed.Make as approved by GE

S&F in repair/replacement of energy saving, environmental friendly, long life, pressure die-cast aluminium housing with IP66 protection flood light with high power LEDs as light source connecting and testing LED flood lights of 210/200 watts capacity fixed on high mast/ street light pole complete all as specified and directed.

All as per item No. 206 here-in-before but of 120 W capacity LED Flood light

All as per item No. 206 here-in-before but of 70 W capacity LED Flood light

S&F in repair GI pipe 50 mm light grade including fittings to poles/laid under road for protection of under ground cable including making good in disturb surfaces and sound condition complete all as specified and as directed.

Supply and fix in replacement of junction box made of thermoplastic, IP 66 of size 155mm x 210mm x 92mm consisting of 4 Nos terminal on porceline support inside enclosure,5 way insulated fo cable glands (incl locknut) with MCB SP 6 Amps and using 40 x 6mm size MS clamps of required shape & size with bolts, nuts & washers and making connection by providing suitable size of lugs / binding and testing directed complete all as specified and directed. Make : Hensel /C&S/BCH or equivalent as approved.

Dismantling of old unserviceable stay assembly including stay wire complete with necessary demolition of concrete excavation and earth work as required and removing the same from site complete all as specified and directed.

S&F stay assembly complete with all accessories and stay clamps all as shown in electrical plate No 1 of SSR Part I with using stay rod of 20mm dia and insulator etc. complete all as specified and directed. Note:-Excavation and earth work shall be measured and paid seperately under relevant item.

M&L for 3 core cable 1.5sqmm FRLSH PVC insulated copper conductor weather proof in existing surface/ recessed/on pole complete all as specified and directed.

M&L for PVC conduit pipe medium grade 20mm dia (ISI Marked) including necessary clamps, nuts, bolts etc. as required complete all as specified and directed.

Supply, jointing and testing straight through cable jointing kit (Heat shrinkable type) for 1100 volt grade cable complete with and including jointing materials and including accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 6sqmm 2 core to 16sqmm 2 core and including provision of aluminium thimbles complete all as specified and directed.

All as per items No- 215 here-in-before but 25 to 50Sqmm 3.5 Core

All as per items No- 215 here-in-before but 70 to 150Sqmm 3.5 Core

All as per items No-215 here-in-before but 185 to 250Sqmm 3.5 Core

Supply, jointing and testing straight through cable jointing kit (Heat shrinkable type) for 1100 volt grade cable complete with and including jointing materials and including accessories suitable for 4.0 core XLPE armoured aluminium conductor cable of size 16sqmm 4 core including provision of aluminium thimbles complete all as specified and directed. Make:- Denson / M Seal / Reychem

S&F in repair danger notice plate of 1.6mm thick mild steel sheet vitreous enamelled white with letters figures and conventional skull and bones in signal red colour and fixed with MS clamps bolts and nuts of approved size for 25x15 cm size complete all as specified and directed.

S&F in repair GI pipe 80mm light grade including fittings to poles/ laid under road for protection of under ground cable including making good the disturb surfaces and sound condition complete all as specified and directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 49,906.00 (refer Tender Srl Page No 49). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

KD SAHA and CO.INDIA

M/S G D CONSTRUCTION

M/S BENGAL ENGINEERING ENTERPRISES

GOUTAM KUMAR GHOSH

Shree Ram Construction

M/S CONTRACTS

CHAKRABORTY AND SONS

M/S GURUNG CONSTRUCTION