Loading
Loading…
Loading…
Tender Value
₹1.0 Cr
EMD Value
₹2.0 L
Closing Date
12 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (WMS)
TENDER
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of 'V/N' or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual Contractual turnover. The tenderers shall submit requisite information as per annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Definition of similar nature of work: - "Execution of any HT or LT electrical work"
20 conditions · 9 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Copy of PAN card.
Bank Mandate for NEFT/RTGS payment.
Copy of GST registeration
For all tenders having advertised cost of Rs.10 lakh or above, the contractor shall have to submit the option to take payment from Railways through a letter of credit (LC) arrangement. The tenderer shall affirm having read over and agreed to the terms and conditions of the LC option. The option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter, during execution of contract. (The tenderer have to submit the option to take payment from Railway through a Letter of Credit arrangement).
Documents in support of (a)Sole Proprietorship firm (b) HUF (c) Partnership Firm (d) Joint Venture (JV) (e) Company registered under Companies Act 2013 (f) LLP (Limited Liability Partnership) (g) Registered Society & Registered Trust. (for details refer tender documents)
Undertaking by the tenderer for not being Black Listed/Debarred:- For the tender submitted on (a)Sole Proprietorship firm (b) HUF (c) Partnership Firm (d) Joint Venture (JV) (e) Company registered under Companies Act 2013 (f) LLP (Limited Liability Partnership) (For details refer tender documents).
The validity of tender offer if mentioned elsewhere in the bid document is different from the number of days shown in the "NIT HEADER", then the validity of offer as indicated in the "NIT HEADER" shall prevail and considered binding.
The firm should follow all the guidelines & protocols set by government regarding COVID-19 pandemic. The firm should counsel his staffs regarding COVID-19's safety measures and provide the PPE kits of COVID(i.e. mask, soap, sanitizer) to their staffs
Please read carefully the entire e-tender document, explanatory notes & attached Annexures from the document section before submission of tender offer.
Power supply arrangement & Electrical wiring in connection to Proposal for Construction/Renovation of Service building/staff rest room/toilets and other ancillary works inside workshop under SSE/W/WS/JMP
JMP-ELECT-76-2025~ER
JMP-ELECT-76-2025
Open
Works - General
9 Months
Munger, Bihar
₹0
₹2.0 L
12 Jan 2026
19 Dec 2025
29 Dec 2025
43 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,00,91,826.7 | ||
| — | — | — | 3,23,174.4 | ||
| Supply, fixing and commissioning of 100A bus bar 8 way as per Havells Item Code IHBC010008 | — | 24.00 | — | — | |
| — | — | — | 2,26,912.8 | ||
| Supply, fixing & commissioning of 4 pole 100A MCCB, breaking capacity 25/35kA with sheet steel enclouser with MS clamp on beam. (Make of MCCB- Havells, L&T, ABB, HPL or similar) | — | 24.00 | — | — | |
| — | — | — | 3,22,080 | ||
| Supply & fixing of 8 ways SPN double door with powder coated steel sheet enclosure, with all connected materials and works (Make- L&T, Havells, Anchor or similar) | — | 160.00 | — | — | |
| — | — | — | 2,39,680 | ||
| Supply,fixing and commissioning of 2 pole 40 A RCCB in accordance with IS 12640 (Part 1) / IEC 61008-1, 240/415 V, 50 Hz, 30 mA as per L&T cat no. BG204003(Make- L&T, Havells, ABB or any reputed make) | — | 160.00 | — | — | |
| — | — | — | 94,720 | ||
| " Supply, fixing and commissioning of 2 pole 32 Amp MCB type ""C"" in accordance with IS/IEC 60898, 240/415 V, 50 Hz having breaking capacity 10 KA (Make- Havells, L&T,ABB or any reputed make) " | — | 160.00 | — | — | |
| — | — | — | 1,15,328 | ||
| "Supply, fixing and commissioning of 1 pole (10-32) Amp MCB type ""C"" in accordance with IS/IEC 60898, 240 V having breaking capacity of 10 KA . (Make of MCB- Havells, L&T,ABB or any reputed make) " | — | 640.00 | — | — | |
| — | — | — | 15,00,000 | ||
| Supply and concealed wiring of light/fanpoint with 2 nos. PVC multistrand FRLS copper wire 2.5 sq.mm. 1100 V grade along with earth connection continuity with 1 no. PVC multistrand single core FRLS copper wire 1.5 sq.mm 1100 V grade through PVC conduuit/casing capping including all other accessories. The point wiring will be made using modular switches and boards (Cable Make: Anchor, Havells, Mescab, Polycab, Greatwhite, Switch Make: Anchor, Greatwhite, Cona, G.M, Havells or any reputed make). | — | 2400.00 | — | — | |
| — | — | — | 10,38,000 | ||
| Supply and concealed wiring of main circuit with 2x1CX6 mm2 (Phase and Neutral individually to be of 6.00 sqmm size)PVC flexible FRLS wire with 2.5sqmm copper earth wire (Cable Make: Anchor, Havells, Mescab, Polycab, Greatwhite or any reputed make). | — | 6000.00 | — | — | |
| — | — | — | 23,24,000 | ||
| Supply and concealed wiring of sub main circuit with 2x1CX4 mm2 PVC (Phase and Neutral individually to be of 4.00 sqmm size)copper flexible FRLS wire 2.5sqmm copper earth wire (Cable Make: Anchor, Havells, Mescab, Polycab, Greatwhite or any reputed make). | — | 14000.00 | — | — | |
| — | — | — | 1,24,000 | ||
| Supply & concealed wiring with 1.5 square mm FRLS coppper cable for inverter point. (Cable Make: Anchor, Havells, Mescab, Polycab, Greatwhite or any reputed make). | — | 3100.00 | — | — | |
| — | — | — | 2,93,760 | ||
| Supply and concealed wiring of 6 Amp pin socket point (5 Pin) with 2.5 mm2 PVC insulated single core flexible multistrand FRLS copper wire along with modular switchboard & 18 SWG insulated copper earth wire (Cable Make: Anchor, Havells, Mescab, Polycab, Greatwhite, Switch Make: Anchor, Greatwhite, Cona, G.M, Havells or any reputed make). | — | 640.00 | — | — | |
| — | — | — | 2,62,240 | ||
| Supply, fixing and commissioning of concealed modular type power socket 16 Amp with switch 16Amp and modular box and cover plate along with insulated copper 4 sq mm earth wire. (Switch Make-Anchor,Havells, Greatwhite,Cona,GM or any reputed make) | — | 440.00 | — | — | |
| — | — | — | 1,73,040 | ||
| Supply & modular wiring for AC Point with Modular AC starter/ Modular MCB.(Make- Anchor, Cona, Havells, Crabtree or any reputed make) | — | 280.00 | — | — | |
| — | — | — | 78,000 | ||
| Supply & fixing of bracket wall light with lamp (Make: Philips/Havells/Bajaj/Surya/ Crompton or similar) | — | 60.00 | — | — | |
| — | — | — | 11,60,000 | ||
| Supply of Down light Edge lit sleek round recessed mounted LED downlight with white powder coated die cast housing and diuser for low glare illumination BGSLO Sleek Surface 15W WH RD LED (Material to be inspected by RITES) | — | 800.00 | — | — | |
| — | — | — | 3,08,560 | ||
| Fixing of above down light fittings with suitable clamps etc. | — | 800.00 | — | — | |
| — | — | — | 10,99,384 | ||
| Supply and fixing of BLDC ceiling fan of sweep size- 1200mm, Number of Blades- 3, Motor Type- BLDC, Wattage- from 26W to 32W, Power Factor>= 0.90, Rated Speed> 350rpm, Air delivery > 220 m3/ min, service value minimum 7.5 m3/min/watt, Rated voltage: 220-240V, Blade Material - high grade Aluminium alloy, Standard: IS- 374:2019 or latest including fixing of fan with suitable clamping arrangement & "S" hook, etc.with all accessories as per site requirement. colour: Brown. (Make - Havells /Usha /Orient /Crompton /Bajaj/ Anchor or any reputed make) (Material to be inspected by RITES) | — | 403.00 | — | — | |
| — | — | — | 13,483 | ||
| Supply, fixing & commissioning of Modular indicator. (Make: Philips/Havells/Anchor or similar) | — | 139.00 | — | — | |
| — | — | — | 1,01,910 | ||
| Supply, fixing and commissioning of earth pipe 2" dia 10 feet long heavy duty guage ISI marked GI pipe (Make- Tata, Jindal, Bansal or similar) along with construction of earth chamber including of 6 SWG GI wire from earth electrode to main switch/panel complete with all masonary works covering by RCC slab with net plastering as per site requirement & writing the earth value in ohms including supply of materials. | — | 30.00 | — | — | |
| — | — | — | 4,804.5 | ||
| Dismantling of old existing wiring & deposit to LT store. | — | 15.00 | — | — | |
| — | — | — | 2,88,750 | ||
| Supply fixing and connnection of LED name board | — | 150.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .