Repair of seepage roof sheet, false ceiling sunken floor treatment, flooring and other misc work, incl treatment to certain bldg of A2 and D Area under GE (W) Mathura

Amount

Dismantling of AC (corrugated or semi corrugated etc) sheets in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of red colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel ridges suitable for corrugated steel sheet 0.5mm thick of red colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts and washer in roofs, walls etc complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts and washer in roofs, walls etc but except sheet complete all as specified and directed.

S&F 6mm thick asbestos cement two pices adjustable plain wing ridge complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets and frame complete all as specified and directed.

M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section ( not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm including providing and fixing designer decorative Gypsum board 4mm thick complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' old size brick straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

All as per item No 10.00 (here-in-before) but except bricks.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM in (1:4) finished fair and even external surface complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:6) on brick or concrete surface other than fair faces of brick complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:4) on fair finished faces of ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a one coat of alkali resistance primer complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a one coat of chalk whitening on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

Taking down chowkhats with shutter (without taking off shutters from the frame) area n.exc. 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down shutter only of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.

S&F Pressed steel frames for doors size 125x60mm with one or more rebates including necessary fixing lugs, 150mm stainless steel hinges, lock strike plate , etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.

S&F Pressed steel frames for doors size 105x60mm with one or more rebates including necessary fixing lugs, 150mm stainless steel hinges, lock strike plate , etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.

M&L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed.

S&F 35mm thick plain framed panelled door shutter, factory made (any number of panels) of 2nd class hard wood with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces including 2nd class hard wood kail beading 20mm wide tapering from 10mm to 5 mm on one side of shutter & fitted to chowkhats. The size of rail and style shall be as per IS –1003 (Part-I) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.

S&F 30 mm thick 2nd class hard wood glazed & skelton shutters (factory made) open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded mitred and rabated sash bars any number, edges of framing plain chamfered or rounded fitted with cut mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I Section- 8 clause 8.24 (a) and fitted to frames/chowkats as in door shutters. (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification and drg in SSR Part II 2010 complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

S&F for factory made window/ventilator steel rolled framed section of 1 to 1.25mm thick made of galvanized steel, box type hollow , Hollow P Sec incl grill made of 10mm Sq MS bars welded to 12mm x 6mm, MS flat @ 150mm c/c. Grill shall be welded to window frame. The complete unit Ref TD/2013/01 sheet 1/3 to 3/3 shall be a shop coat of zink chromate primer including the following :-. (a) Fly proof shutter shall provided with stainless steel 32mm gauge fly mesh of 304 Gde FE with 144 holes per square mesh. Glazed shutter and fixed glass portion shall be provided with glass of 4mm thick float glass. (b) Window frame shall be fixed to brick wall with by cutting holes and made good dismantled portion in PCC (1:2:4) type B1 four Nos hold fast block for each window/ventilator :- (i) Hold fast 150mm long of 20x3mm MS flat made to shape 4 Nos per window. (ii) Handle of Z Sec 20mm x 25mm, 100mm long – 1 No per leaf. (iii) Mild Steel tower bolt 150mm long - 02 Nos per leaf. (iv) Z Section 20mm x 25mm, 100mm long stopper - 1 No per leaf. (v) Cleat 55 mm long of hollow square 15 x 20 x 63mm welded to hinge 01 No per leaf. (vi) MS pintle hinges size 75 x 12 mm 02 Nos per leaf. NOTE : During Fixing of Window, Surface shall be make good in plumb with existing finishes like cement plaster complete all as specified and directed.

S&F framed work such as grill gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters walk ways railing frame work of ceiling etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F 12mm dia and 150mm long anchor bolt stainless steel with drilling fastner machine compressed in wall complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described exc 10 cm width or girth and applying two coats of synthetic enamels paints over a coat of pink primer complete all as specified & directed..

S&F 150mm, mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F 100mm long stainless steel Butt hinges fixed complete all as specified and directed.

S&F 200mm stainless steel barrel tower bolts with bright bolt and fixed complete all as specified and directed.

S&F 150mm long stainless steel handles, oval type complete all as specified and directed.

S&F 300mm stainless steel sliding door bolts, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 100mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F mild steel Door seal for doors upto 1000mm long and thickness not less than 1mm complete all as specified and directed.

S&F 150mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section in framed work, in any position complete all as specified and directed.

S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe-410 w (Gde E-250) quality-A complete all as specified and directed.

M&L for applying two coats of synthetic enameled paint over a coat of red oxide primer on new steel surfaces exc. 10 cm girth and width including preparation of new steel surfaces complete all as specified and directed.

Dismantiling floor, hearth or wall tiling including cement motar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premishes complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 8 to 9 mm thick exceeding 0.11 sqm but not exceeding 0.18 sqm (Square/rectangular) in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

All as per item No 46.00 (here-in-before) but over 10mm thick rendering in CM (1:3) as in skirting/dado.

M&L for joint free Non skid coloured ceramic tiles 8 to 9 mm thick exceeding 0.18 sqm but not exceeding 0.38 sqm (Square/rectangular) in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

All as per item No 48.00 (here-in-before) but over 10mm thick rendering in CM (1:3) as in skirting/dado.

M&L for glazed coloured ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) for skirting / dado finishes complete all as specified and as directed.

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and as directed

M&L for cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and throating complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2, (1:3:6) using 40mm graded stone aggregate as plinth protection and finished surface even and smooth without using extra cement complete all as specified and directed.

Hacking out old broken glass from wooden frames/metal frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed.

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty or wdn beads in shape n.exc 0.50 Sqm in each pane complete all as specified and directed.

Dismantling structural steel work of any description and in any position complete all as specified and directed.

S&F mild steel flat iron as in hold fasts, wind ties etc and similar small work confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F powder coated aluminum window using 63mmx38mmx1.6mm chowkhats with 48mmx48mmx1.6mm openable section as in shutter including ornamental aluminium grill, 5.5mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100mm-02 Nos, tower bolts 100mm-02Nos, hooks and eye-02 Nos 150mm, butt hinges 100mm 04 Nos etc complete all as specified and directed.

S&F aluminium anodised powder coated door frame and shutters powder coated (minimum thickness of powder coating 50 micron), aluminium section including necessary joining cleats, glazing clips, ruber neoprene packing, handles aluminium 150mm - 2 Nos in each door, aluminium tower bolt 150mm - 02 Nos, hinges, one lock fourlever with duplicate key make goderej and aluminium (extruded section) body hydorlic door closer designation No. 3 universal type, anodised aluminum snap beading screws, 5.5mm thick tinted glass complete all as specified and directed as per detials given below :- (a) Outer frame section - 100mmx50mmx1.2mm (b) Shutter - 90mmx50mmx1.2mm (c) Top, middle & bottom rail - 100mmx50mmx1.2mm

Wornout existing treatment from sunken portion of WC /Bath/Kitchen/Passage area n exc 2.5 Sqm each including taking down floor tiles, plaster, lime/cement concrete, WC trap complete empty of existing sunk. (Taking down of plumbing & sanitary fixing & fixture shall be measured under relevant items).

M&L for treatment of sunken floor slab cosisting of the following specification as under: (i) Cleaning the sunken/lowered portion of RCC slab surfaces(including vertical total depth with skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. (ii) PCC (1:2:4) type B0 40mm thick (average) using 12.5mm graded stone aggregate as in padding to acheive proper slope towards spout . (iii) Rendering of uneven surfaces with 10mm thick in CM (1:4) mixed with liquid water proofing compound (Liquid water proofing shall be measured and paid separately) and finish surface even and fair . (iv) All junctions points of side wall where CI/GI pipes are passing through wall shall be sealed with epoxy putty. (v) After drying putty, wash the slab and sides of sunken portion with water make it clear and clean. (vi) At the end sunken portion shall be checked for dampeness and seepage/leekage. If dampness/seepage is noticed nozzles shall be fixed and grounting carried out complete.

M&L for rendering dubbing coat over irregular surfaces of chajjas roof projections/ceiling/facia etc average 15mm thick in CM (1:4) over cement slurry coat @ 3Kg/Sqm making the surface even followed by 5mm thick rendering in CM (1:3) furnished even & smooth including making of drip course as required complete including roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed.

Supply only Liquid water proofing compound of approved make complete all as specified and directed.

S&F GI tubes medium grade, laid on sunken floor as on spout pipe 50mm bore complete all as specified and directed.

M&L for PCC (1:5:10) type E2 using 40mm grade stone aggregate in sunken portion complete all as specified and directed.

M&L for cutting holes in brick walls exceeding half brick wall and n.exc one brick wall, built in cement mortar for inserting spout and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) Type B-1 as required complete all as specified and directed.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap including cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified and directed.

S&F in repair PVC valve less, symphonic action type, flushing cistern 10 ltr capacity, low level, white/coloured, with inlet, wall valve, float and handle, flush pipe including bracket complete all as specified and directed.

S&F stainless steel kitchen plate rack overall size 900mmX900mmx200mm made out of 0.8 mm thick stainless steel sheet etc complete all as specified and directed.

Taking down existing aluminium door shutter of any size, setting a side and change the Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed and refixing of aluminium door in same position complete all as specified and directed.

S&F in repair door closer hydraulically regulated designation No.3 universal type of Aluminium (Die cast body) suitable for door shutters of 851 to 1000mm in width and fixed complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls including all fittings complete all as specified and as directed.

S&F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls including all fittings complete all as specified and as directed.

S&F PVC (SWR) bend of any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) junction single, ( Single T) equal or unequal 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bend of any radius 75mm bore complete all as specified and directed.

S&F in repair PVC (SWR) floor trap of 75 mm internal bore ISI marked plain including jointing with solvent cement etc complete all as specified and directed.

S&F in repair 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 110mm PVC (SWR) junction double, (double T), equal or unequal complete all as specified and directed.

S&F in repair stack clamps made out of 50mm by 5mm flat iron including bolts and nuts and securing ends of stays to wall or roof for 110mm bore pipe complete all as specified & directed.

S&F in repair stack clamps made out of 50mm by 5mm flat iron including bolts and nuts and securing ends of stays to wall or roof for 75mm bore pipe complete all as specified & directed.

Taking down surface / concealed copper / aluminium point wiring (light,bell,fan,socket or power) complete, including fixtures and fittings such as switches,ceiling roses,lamp holders,pendants,sockets, regulators,light fittings etc and making good disturbed surfaces with plaster on walls, floors etc complete.

M&L for point wiring for one light point controlled by one switch with PVC insulated, unsheathed 1.5 sqmm FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC concealed conduit medium grade not less than 20 mm dia ISI marked ivory colour with and including all conduit fittings and fixing accessories including not less than 1.60mm thick sunken anodised pressed steel terminal boxes/modular boxes suitable for fixing of modular face plates, 3.0 mm thick hylam sheet cover/modular plate cover for mounting switches, sockets, fan regulators etc incuding 1.5 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete.

S&F switch piano flush button single pole, one way 5 Amp 240 Volt complete all as specified and directed.

S&F 36 W LED edge-lit luminaire suitable for armstrong/grid ceiling complete with separate electronic driver 6000K of 2'x2' LED panel for recessed dust-free installation with high brightness LEDs for glare-free homogenous illumination with all connected accessories complete all as specified and directed.

M&L for bands, straps, supports or stays for rainwater , Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and lintle hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

R N AGRAWAL

M/s Hoti Lal Contractor

Ms Kamal Kant Agarwal

JWALA ELECTRIC CONTRACTORS