REPAIR TO VALLEY GUTTER RWP HANGAR DOORS ROLLING SHUTTER FLOORING WORKS PLINTH PROTECTION AND ALLIED WORKS IN TECH AREA AT AFS CHAKERI KANPUR

Amount

Demolition of cement concrete (Un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L Cement concrete 50 mm thick type C- 2, 1:3:6 ( using 40mm graded stone aggregate) as in sub base and floor complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness laid bededd and pointed in any mortar in roof or in any position complete all as specified and directed.

M&L industrial heavy duty full body vitrified tiles shade as directed 15 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed of CM (1:4) complete all as specified and directed.

S&F in repair vitreous china wash basin white round back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets complete all as specified and directed.

S&F in repairs of water closet seat cover, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge.

Dismantling PVC water tanks,exc 250 litres and n.exc 500 litres capacity complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), , triple layer construction, hoisted & fixed in position directed complete all as specified and as directed.

Taking down steel water tubing of 15 mm dia bore incl connection complete all as specified and directed.

Taking down steel water tubing of 20 mm dia bore incl connection complete all as specified and directed.

Taking down steel water tubing of 25 mm dia bore incl connection complete all as specified and directed.

S&F 15mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-charge.

All as per item No 12 above but fixing only GI tubing complete all as specified and as directed.

S&F 20 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-charge.

All as per item No 14 above but fixing only GI tubing complete all as specified and as directed.

S&F 25 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-charge.

All as per item No 16 above but fixing only GI tubing complete all as specified and as directed.

S&F in repair health faucet ,brass chromium plated including 1M long flexible pipe of chromium plated Make Prayag Cat No BEA-81 or equivalent of Cera/Essco complete all as specified and directed

S&F in repair ball/float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore minimum weight 210 gms complete all as specified and as directed.

All as per item no. 19 but 15 mm dia

All as per item no. 19 but 25 mm dia

S & F in repair half stall urinal of size 420x395x635 mm complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge or thickness at any position or similar pattern of roof covering complete all as specified and directed.

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugation side lap fixed with coach screw and washer or self tapping screw in roof, wall etc, including taking down complete all as specified and directed.

S & F 0.80 mm thick precoated Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F 0.80mm thick plain Precoated Galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F . wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

All as per item no. 30 but fixing only

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

Dismantling of Brick work / stone masonry built in cement mortar complete all as specified and directed.

M&L brick work with sub class B bricks old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

All as per item No 34 above but except bricks complete all as specified and as directed. Note:- Old bricks obtained fron item No 33.00 shall be reused after cleaning.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth without extra cement complete all as specified and as directed.

M & L for preparing new plastered surface and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M & L for preparing new plastered surface and applying two coats of Oil emulsion distemper over a coat of primer and a coat of wall care putty complete all as specified and as directed.

S & F in repair wind driven turbo ventilators of size 600 mm dia. The top portion should be made of aluminium with powder coating. The shaft and varipitch should be made of stainless steel and aluminium respectively alongwith heavy quality ball bearing system without FRP base complete all as specified and directed. Make: SVS or equivalent make as approved by GE in writting Note 1. Site for execution shall be handedover as per requirement 2. Contractor have to Supply and fix the ventilator within 10 hrs of communication by department otherwise, there will be a pentalty of Rs 500/- per hour after the prescribed fixing time period.

All as per item no. 39 but with FRP corrugated base sheet

S&F in repairs PVC urinal/WHB waste pipe of required dia, 800 mm long, complete all as specified and directed.

S & F in repair 15 to 16 mm thick of size 600x600 mm mineral fibre false ceiling board of pattern classic lite RH 99 (bevelled tegular) on existing grid system complete all as specified and as directed.

Taking down eaves, gutters and rain water pipes any size and pattern including all fittings complete all as specified and directed.

S & F UPVC rain gutter pipe of dia 250mm and made up in shape of half circle as in valley gutters end connection jointed with elastomeric rubber seal as approved by GE ccomplete all as specified and directed.

S & F PVC pipes 160 mm bore single socketed in any length of pressure rating 4 Kg/Sqcm with or without rubber ring joints fixed to Hangar wall complete all as specified and directed.

S&F PVC SWR bend/shoe of any radius for 160 mm dia complete all as specified and directed.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S&F in repair S.S. jet spray (L-bend type) with 1.5 mtr long tube complete all as specified and directed. Make: prayag cat no. GBEA-118 or equivalent of Cera/ESSCO

M&L for servicing existing unservicable steel rolling shutter of any size and dimension and its operating box including replacement of any operating part like helical spring etc. complete all as specified anfd directed

M&L for servicing existing main steel sliding hangar's doors by aligning cleaning/oiling/ greasing and all necessary welding work, bearing wheels of top and bottom of gate for height upto 21 m including cleaning rails of shutter for smooth movement complete all as specified and directed. Note:- (a) contractor have to make its own arrangement of Scaffolding to reach the top of hangar gate by any means. and for inspection purpose with sufficent man power along with safety equipment for overhauling of sliding door shutter. (b) Site will be given as per requirement basis as decided by Engineer in charge. (c) The contractor will attend and execute item no. 50 with proper fitting and finishing within 8 hours of verbal direction given by Engineer in charge or GE, otherwise, there will be a pentalty of Rs 500/- per hour after the prescribed fixing time period.

SHASHI CONTRACTORS

M/S SDS Construction Co.

J.B.ENTERPRISES

M/S KUSHWAHA BROTHERS

aarohi nirman company