Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹5.5 L+₹4,586.66 (0.84%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹5.6 L+₹16,859.84 (3.08%)Rejected-AOC | L3 | Rejected-AOC L3 |
Tender Value
₹4.7 L
EMD Value
₹4,700
Closing Date
25 Jan 2020, 3:00 pmClosed
Joint General Manager MEP UG
Chennai Metro Rail Limited, Administrative Building, CMRL Depot, Poonamallee High Road, Koyambedu, Chennai 600 107
Providing Lighting Arrangements for Parking areas near VR Mall (Thirumangalam Metro Station)
2020_CMRL_533204_1
CMRL/MEP/UG/07/2019-20
Limited
Electrical Works
Works
45 days
Koyambedu
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹4,700
18 Feb 2020
6 Jan 2020
27 Jan 2020
6 Jan 2020
25 Jan 2020
10 Jan 2020
6 Jan 2020 - 11 Jan 2020
Supply, Laying of 4C 35 Sqmm cable, Jointing, terminating, testing and commissioning of 1100V grade armoured FRLS, XLPE, Al Conductor cable on existing tray at Thirumangalam tunnel ramp dewatering pump panel to VR mall parking area DB
Laying of 4C 16 Sqmm Cable, Jointing, Terminating, Testing and commissioning of 1100V grade armoured FRLS, XLPE, Al Conductor cable on trench from parking area DB to pole light incomer (Cable shall be supplied by CMRL)
Laying of 4C 25 Sqmm Cable, Jointing, Terminating, Testing and commissioning of 1100V grade armoured FRLS, XLPE, Al Conductor cable on trench from parking area DB to pole light incomer (Cable shall be supplied by CMRL)
Laying of 4C 16 Sqmm (Loop Cable from pole to pole) Cable, Jointing, Terminating, Testing and commissioning of 1100V grade armoured FRLS, XLPE, Al Conductor cable on trench from parking area DB to pole light incomer (Cable shall be supplied by CMRL)
Laying of 4C 25 Sqmm (Incoming cable from connector box near ramp to VR mall parking) Cable, Jointing, Terminating, Testing and commissioning of 1100V grade armoured FRLS, XLPE, Al Conductor cable on trench from parking area DB to pole light incomer (Cable shall be supplied by CMRL)
Wiring / Cabling, Jointing, Terminating, Testing & Commissioning of 3C 2.5 Sqmm FRLS, XLPE unarmoured service cable from pole control MCB to light fixtures
Wiring / Cabling, Jointing, Terminating, Testing & Commissioning of 4C 2.5 Sqmm FRLS, XLPE unarmoured service cable from pole control MCB to light fixtures
Supply, Fabrication, Installation of 6mtr GI hot dipped galvanized swaged octoganol pole with foundation bolts, base plate, complete with entry and exit provision and suitable to fix MCB and connector
Supply, Fixing, Terminating, Testing & Commissioning of IP rated ISI 150W LED Light which is suitable to Up / Down adjustment, complete as required.
Construction of RCC base with size of 1m x 0.5m x 0.5m structure with suitable GI base bolt which could withstand 6 Mtr pole including plastering of base structure and applying with suitable paint complete as required
Earthwork excavation for foundation and cable trench, refilling of soil and marking good as same. Trenching from DB area to pole and disposal of surplus excavated soil and bounders including frame work, complete as required
Laying of 40mm HDPE pipe from cable housing to protect cable from damage pipe laying from control DB area to each poles
Supply, Installation, Testing & Commissioning of 415V 3 Ph 4 Wire vertical IP65 rated enclosed panel with neoprene gaskets, fabricated from 2mm thick GI sheet and powder coated door which consist of RYB indicator, detached gland plates for entry of cable from bottom and earthing, neutral provision which is suitable to fix 415V AC operated 3ph energy meter with sight glass arrangement and incomer, sub incomer, out going MCB rail provision and it should have wall mount provision, complete as required
Supply, Instalaltion, Testing & Commissioning of 40A 4 Pole Incomer MCB
Supply, Instalaltion, Testing & Commissioning of 25A 4Pole Sub Incomer ELCB
Supply, Instalaltion, Testing & Commissioning of 16A Single Pole MCB for Outgoing
Supply, Instalaltion, Testing & Commissioning of 6A DP Control MCB for Pole
Supply, Instalaltion, Testing & Commissioning of 3 Phase Energy Meter
Cable Jointing, Termination of 4C 35 Sqmm cable including supply, fixing, crimping of lugs, double compression brass gland, insulation tape etc. complete as reuired
Cable Jointing, Termination of 4C 16 Sqmm cable including supply, fixing, crimping of lugs, double compression brass gland, insulation tape etc. complete as reuired
Cable Jointing, Termination of 4C 4 Sqmm cable including supply, fixing, crimping of lugs, double compression brass gland, insulation tape etc. complete as reuired
Cable Jointing, Termination of 4C 25 Sqmm cable including supply, fixing, crimping of lugs, double compression brass gland, insulation tape etc. complete as reuired
Fabrication, Supply of arm which is suitable to cover 360 degrees should withstand 4 No’s of light fixtures and suitable wiring provision, holding and adjustable nuts, complete as required
Supply & Provision of power socket 5 / 16A power socket with control MCB and suitable box
Installation of single pole arm, complete as required (Pole is supplied by CMRL)
Installation of 72W LED light and internal wiring with suitable accessories
Earthing: Earthing with GI earth pipe 4.5 mtr long 40mm dia pipe fabrication, jointing, connecting of electrode and earth wire with suitable accessories and providing masonary enclosure with cover palte
Providing & fixing of 2 run 8 SWG GI wire on surface or in recess for loop earthing as required for DB and Pole
Laying of GI 100 mm B Class Pipe for cable housing for road crossing from ramp parking to VR mall opposite parking and filling with PCC Concrete
TAURS ENTERPRISES
Leo Labour Contractor
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .