Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC NEAR PROTHRAPUR COMMUNITY HALL PAHARGAON GARACHARMA POST SRI VIJAYA PURAM 744105 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | ₹36.3 L | L1 | Accepted-AOC AOC |
| 2 | L2₹45.1 LRejected-Finance BRICHGUNI CHOWK PROTHRAPUR SOUTH ANDAMAN SRI VIJAYA PURAM 744103 | SRI VIJAYA PURAM | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744103 | ₹45.1 L | L2 | Rejected-Finance Not being L1 |
| 3 | L3₹45.9 LRejected-Finance | ₹45.9 L | L3 | Rejected-Finance Not being L1 |
| 4 | L4₹46.0 LRejected-Finance ATR MAIN ROAD GARACHARMA II OPP MAHINDRA JADWET SHOWROOM SRI VIJAYA PURAM 744105 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | ₹46.0 L | L4 | Rejected-Finance Not being L1 |
| 5 | L5₹46.5 LRejected-Finance OPP MARUTI SERVICE CENTRE SARACHARMA POST SRI VIJAYA PURAM 744 105 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | ₹46.5 L | L5 | Rejected-Finance Not being L1 |
| Sl No | Description | Qty | Unit | M/s Harjas Construction & Waterproofing Co L7 | V CHINNA DURAI L6 | RPG AND COMPANY L4 | D K Enterprises L1 | SIMONS CONSTRUCTION L2 | M/s Ramesh Lal L5 | ANITA VARMA ENTERPRISES L8 | M/s K Moorthi L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down cement plaster on brick or PCC block masonry wall in any description complete all as specified and as directed. | 300 | Sqm | 118 ₹35,400 | 117 ₹35,100 | 112 ₹33,600 | 100 ₹30,000 | 111 ₹33,300 | 115 ₹34,500 | 120 ₹36,000 | 95 ₹28,500 |
| 2.00 | M&L for rendering 10mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth etc., complete all as specified and as directed. | 100 | Sqm | 493 ₹49,300 | 488 ₹48,800 | 468 ₹46,800 | 400 ₹40,000 | 463 ₹46,300 | 477 ₹47,700 | 500 ₹50,000 | 380 ₹38,000 |
| 3.00 | Supply only water proofing compound conforming to IS-2645 1975 all as specified. | 5 | Kg | 118 ₹590 | 117 ₹585 | 112 ₹560 | 60 ₹300 | 111 ₹555 | 115 ₹575 | 120 ₹600 | 110 ₹550 |
| 4.00 | M&L for rendering 15mm thick plaster in CM (1:4) on brick/block wall or concrete surfaces finished even & without using extra cement plaster complete all as specified and as directed. | 100 | Sqm | 448 ₹44,800 | 444 ₹44,400 | 426 ₹42,600 | 400 ₹40,000 | 421 ₹42,100 | 434 ₹43,400 | 455 ₹45,500 | 430 ₹43,000 |
| 5.00 | M&L for rendering to ceiling in 5mm thick on fair faces concrete surface in CM (1:3) finished even and smooth without using extra cement complete all as specified and as directed. | 100 | Sqm | 443 ₹44,300 | 439 ₹43,900 | 421 ₹42,100 | 350 ₹35,000 | 416 ₹41,600 | 429 ₹42,900 | 450 ₹45,000 | 425 ₹42,500 |
| 6.00 | M&L proparing newly plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Tractor uno), Berger (Bison Emulsion), Nerolac (beauty smooth), Shalimar Paints (No.1 Silk). | 100 | Sqm | 197 ₹19,700 | 195 ₹19,500 | 187 ₹18,700 | 150 ₹15,000 | 185 ₹18,500 | 191 ₹19,100 | 200 ₹20,000 | 185 ₹18,500 |
| 7.00 | M&L proparing newly plastered surfaces of CEILING and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge. | 100 | Sqm | 197 ₹19,700 | 195 ₹19,500 | 187 ₹18,700 | 150 ₹15,000 | 185 ₹18,500 | 191 ₹19,100 | 200 ₹20,000 | 189 ₹18,900 |
| 8.00 | M&L for complete removal of old distempered surfaces and applying wall care putty 2 to 3 mm thick on walls surfaces in two layers by rubbing with sand paper to achieve smooth surfaces complete all as specified and as directed. | 200 | Sqm | 177 ₹35,400 | 176 ₹35,200 | 168 ₹33,600 | 150 ₹30,000 | 167 ₹33,400 | 172 ₹34,400 | 180 ₹36,000 | 170 ₹34,000 |
| 9.00 | M & L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE colour with silicon additives coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over new surfaces complete all as specified and as directed by Engineer-in-charge.
Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion). | 100 | Sqm | 256 ₹25,600 | 254 ₹25,400 | 243 ₹24,300 | 250 ₹25,000 | 241 ₹24,100 | 248 ₹24,800 | 260 ₹26,000 | 246 ₹24,600 |
| 10.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the rubbies complete all as specified and as directed. | 230 | Sqm | 217 ₹49,910 | 215 ₹49,450 | 206 ₹47,380 | 100 ₹23,000 | 204 ₹46,920 | 210 ₹48,300 | 220 ₹50,600 | 208 ₹47,840 |
Updated dates
Tender Value
₹33.5 L
EMD Value
₹67,000
Closing Date
7 Jan 2026, 6:00 pmClosed
GE, Minniebay, Sri Vijaya Puram
GE, Minniebay, Junglighat (PO), Sri Vijaya Puram -744103
8671/E8- ADDN / ALTN TO SENIOR SAILORS CREW ROOM AND TOILETS IN P-18 HANGER AT INS UTKRSOH AND PROVN OF COMPACTOR FOR STORAGE BAY AND PARTITION WITH LOCKING ARRANGEMENT AT 34 WEU AND SE SECTION ADMIN OFFICE INS UTKROSH UNDER GE MINNIE BAY, SRI VIJAYA
2025_MES_744484_1
8671/E8
Open Tender
Civil Works
180 days
GE, Minniebay, Sri Vijaya Puram
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
Yes
GE, Minniebay
₹67,000
Yes
3 Mar 2026
13 Dec 2025
9 Jan 2026
13 Dec 2025
7 Jan 2026
31 Dec 2025
Amount
Taking down cement plaster on brick or PCC block masonry wall in any description complete all as specified and as directed.
M&L for rendering 10mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth etc., complete all as specified and as directed.
Supply only water proofing compound conforming to IS-2645 1975 all as specified.
M&L for rendering 15mm thick plaster in CM (1:4) on brick/block wall or concrete surfaces finished even & without using extra cement plaster complete all as specified and as directed.
M&L for rendering to ceiling in 5mm thick on fair faces concrete surface in CM (1:3) finished even and smooth without using extra cement complete all as specified and as directed.
M&L proparing newly plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Tractor uno), Berger (Bison Emulsion), Nerolac (beauty smooth), Shalimar Paints (No.1 Silk).
M&L proparing newly plastered surfaces of CEILING and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge.
M&L for complete removal of old distempered surfaces and applying wall care putty 2 to 3 mm thick on walls surfaces in two layers by rubbing with sand paper to achieve smooth surfaces complete all as specified and as directed.
M & L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE colour with silicon additives coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over new surfaces complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion).
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the rubbies complete all as specified and as directed.
S&F glazed digital ceramic coloured tiles in vertical surfaces 300x450x7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl cutting to reqd shape and size complete all as specified and as directed.
M&L for Double charged/ultracharged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM (1:6) etc., complete all as specified and as directed.
-Ditto all as per item No above but in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over 10mm thick backing in cement mortar (1:3) etc., complete all as specified and as directed.
M&L for coloured non-skid ceramic tiles 7 to 8 mm thick exceeding 0.11 sqm but not exceeding 0.18 sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:6) etc., complete all as specified and as directed.
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in CM(1:6) etc., complete all as specified and as directed.
Dismantling of wall / ceiling boards (fiber, pulp, insulation etc) / insulation boards /slabs/blankets of any thickness including cover fillets ridges etc, complete all as specified and directed.
Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge.
Taking down chowkats or frames(without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each.(including Aluminium windows/ventilators etc) complete all as specified and as directed.
Supply and fixing factory made uPVC any colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
S&F of 6mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed.
S&F for factory made single extruded 18/19 mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed. NOTE:- All joint should be filled with sealant
S&F magnet catch for cupboards, drawer,file rack,of brass body and skirting plate complete all as specified.
S&F stainless steel auto closing heavy duty modular hinges for cupboard shutter complete all as specified and as directed.
S&F for 100 mm size hasp and stable , safety type , brass with mild steel hinges pin including bolt to hinge plate with scrows etc., complete all as specified and as directed.
Dismantling , Plain or corrugated steel sheeting any gauge hickness, including Nainital or similar pattern roof coverings complete all as specified
S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.
S & F in repairs Aluminium flat iron work in, wind ties screwed as directed, including all necessary drilling, bolting or riveting etc and similar work complete all as specified and as directed.
Dismantling wrought iron or mild steelwork of any description not otherwise provided for complete all as specified and as directed.
S&F for Rolled sections/Tubular MS pipes as in cross beams, hip and jack rafters, vertical posts, purlins where connected to common rafters fixed with angle cleats or similar work including welding and all necessery works complete all as specified Note : The rates are inclusive of Scaffoldings as required
M&L for Plates (Plain or Chequered) channels, square or notched (Ordinary and counter sunk) forming holes, without any attachment of Fe 290 (Gde E-165) completely all as specified and as directed by Engineer in Charge.
M&L for preparing new or previously untreated surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of redoxide primer all as specified
S&F in replacement ceramic One Piece Water Closet including soft self closing seat cover and all necessary fittings of suitable size all as per Hindware cat part No 20107 (P-18/S-22) or equivalent as approved complete all as spd and directed by Engineer-In-Charge.
S&F in repair Vitreous China Table top wash hand basin of suitable size incl complete necessary fittings excluding taps all as per Hindware cat part no 91088 model PEARL of Italian collection. or equivalent as approved excluding taps complete all as specified and directed., Hindware (Ist Quality).
S&F in repair vitreous china wash down water closet pan (pedestal pattern) of size 540x375x415mm coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed.
S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe make complete all as specified and as directed. Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl
S&F in repair CP towel rail 20 mm dia, 60 cm long fixed with CP screws and wood cleats / rowel plug in wall, complete all as specified and as directed.
S&F in repairs 15mm dia wall mixer cast copper alloy with capstan heads, chromium plated screwed down high, pressure with provn of overhead shower on upper side connecting legs and wall flanges high quality fancy type. Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl
S&F in replacement of pillar mixer taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, complete all specified and directed. Make: Jaquar, Prayag, Parry ware (super fine).
S&F in repair to Bib Taps, cast copper alloy heavy duty, 15 mm dia, Chromium Plated, long body Fancy Type screwed down for iron pipe and fixed etc., complete all as specified and as directed. Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl
S&F in repair Angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore etc., complete all as specified and as directed. Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl
S&F in repair two way bib tap cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore etc., complete all as specified and as directed. Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position etc., complete all as spd and directed by Engineer-In-Charge. Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl
S & F in repairs 32/40mm dia PVC flexible Waste Pipe, 750 mm long fixed to Wash Hand Basin or Sink complete all as specified and directed..
S&F in Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long of approved quality complete all as specified and as directed.
S&F in repair 100 mm dia CP grating with/without hole incl joints with solvent cement complete all as specified and directed.
M&L for complete removal of existing treatment and Preparation of plastered wall surfaces using mechanical means and removing all fungus, black stains, algae etc and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/itre and UV resistance as per IS 15489:2004, Alkali & fungel resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including piming coat of exterior primer applied @ 0.90 litrel 10 sqm over old surfaces complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion)
M&L for preparation of old plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion distemper complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Tractor uno), Berger (Bison Emulsion) Nerolac (Beauty smooth), Shalimar (No.1 silk)
M&L in repairs 20 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.
M&L in repairs 25 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.
Supplying and fixing of CPVC Brass Elbow 20 mm outer dia complete all as specified.
Supplying and fixing of CPVC Brass Tee 20mm outer dia complete all as specified.
Supplying and fixing of CPVC Brass Elbow 25 mm outer dia complete all as specified.
Supplying and fixing of CPVC Brass Tee 25 mm outer dia complete all as specified.
Supplying and fixing of CPVC Brass Union 20 mm outer dia complete all as specified.
Supplying and fixing of CPVC Brass Union 25 mm outer dia complete all as specified.
Supplying and fixing of CPVC Brass Elbow (3/4 X ½) 20mm outer dia complete all as specified.
S&F in repair Vitreous China urinals, all as per Parryware cat part no C8681 or equivalent complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern or spreader with brackets, flush pipe etc complete all as spd and directed by Engineer-In-Charge
S&F110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to floors complete all as specified and as directed.
S&F 110mm dia PVC (SWR) bend with oval access door complete all as specified and as directed.
Providing & fixing in replacement of factory manufactured hollow PVC wall panels of approved shade, 6 mm 10 mm thick, 200-300 mm wide, and in lengths as per required, having interlocking tongue-and-groove edges, fixed over a dry and smooth surface using recommended adhesive/mechanical fixings, complete with all necessary PVC edge trims, internal/external corner profiles, joint strips, and end caps. panels shall be 100% waterproof, termite-proof, fire retardant( class B1 or Equivalent), and UV resistant( if exposed). work to include surface preparation, cutting, fitting around openings, and final cleaning, all complete as per manufacturer's specifications and directed by Engineer-In-Charge.
M&L for taking down carefully existing aluminium point wiring (light, fan, socket or power) complete fittings fixture such as switches Ceiling roses, pendents,regulators, sockets etc to be measured separately)unscrewing from Board/outlet boxes, fittings & fixtures such as switches, sockets, ceiling rose lamp holder tube/ceiling fitting, bulk head fittings, tube lights & regulator etc and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.
M&L for taking down carefully existing old DBs and making good disturbed surfaces of walls to match the existing surfaces complete all as specified and as directed
M&L for taking down unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces all as specified and as directed.
M&L for point wiring (modular type) with two run of PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm (FRLSH), PVC conduit medium grade/ PVC casing caping and pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc) and drawing one run of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor cable (FRLSH) as earth continuity wire in green colour connected to common earth and each terminal box/fitting all as specified and as directed by Engr-in-Charge. (In ceiling Portion surface conduit wiring shall be carried out.) Note: The quoted rate inclusive for the following :- (a) GI metal flush box and Modular cover plate with frame of any module complete. (b) Proper colour coding is to be followed as per IS Specification. (c) wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.
One light/fan point controlled by one one way switch.
One exhaust/Ceiling fan point controlled by one switch.
One 3 pin socket outlet 5/6 Amps independent.
One 3 pin socket outlet 5 Amps on the same board with other switches
All as per item No 65 above but cable with 4.0 sqmm size for socket outlet 15 amps, independent.
M & L for submain wiring with two single core PVC insulated unsheathed multistranded copper conductor cable of size 6 sqmm (FRLSH) and one single core PVC insulated unsheathed multistranded copper conductor cable green colour of size 6 Sqmm (FRLSH) as earth lead in and including concealed with PVC conduit medium grade of suitable size or surface wiring with PVC casing caping of suitable size and making good the disturbed wall surfaces to match with existing specification including takind down unserviceable submain wiring complete all as specified and as directed. Note : (i) Three run of cable with one run of PVC conduit/PVC casing and caping will be measured as one length. (ii) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.
All as per item No 67 here-in-before but with 6 sqmm cable complete all as specified and as directed.
S&F modular switch one way 6 Amps, 1 module complete all as specified and as directed
S&F modular switch one way 16 Amps, 1 module complete all as specified and as directed.
S&F modular socket, 2/3 pin 6/16 amps, 2 module complete all as specified and as directed.
S&F modular socket, 2/3 pin 6 amps, 2 module complete all as specified and as directed.
Supply & fixing ceiling Rose, 3 terminal polycarbonate isolated body complete all as specified and as directed.
Supply & fixing LED light fitting 20W, 2000lm, CDL, 4 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
S&F as in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, >120lm/watt, IP-20, CCT value 4000k to 6500K, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply and fixing LED 18W inverter batten type fitting 3/4 feet long aluminium extruded housing, charging time 10-12 Hrs with 04 Hrs backup,IP-20 ,rated voltage 230 V, 50 hz, system wattage 20W +/- 10%, system current less than 102 mA, power factor more than 0.95, system lumen efficiency 100lm/watt,CCT 6500K, CRI more than 80, THD less than 30%, driver efficiency more than 85% complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed.
Supply & fixing BLDC ceiling fan 1200mm sweep with blades, suitable electronic remote as per OEM design, down rods and connected accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM, 5 star rated, equipped with brushless direct current motor (BLDC) of wattage < 28W including provision of cable from ceiling rose/connector to fan complete all as specified and as directed.
Supply & fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 HZ, RPM 1200, Copper winding of sweep 250mm and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastner including making arrangement to the window of any type and at any height for fixing of exhaust fan and provision of cable from ceiling rose/connector to fan complete all as specified and as directed.
Supply and fixing as in repair LED building security light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame with lumen output not less than 2500 lumens suitable wattage for efficiency not less than 120 lumens/watt having secondary optics min wattage 25 watt with ingress protection IP 65/66 and potted electronic driver of minimum IP 67 with THD less than 10% CRI>80, P.F>0.95, CCT 5700K, IK>08 SPD of capacity 10 KV and testing on completion complete all as specified and as directed. complete all as specified and as directed.
M&L for GI bracket for street light fitting made out of 25 mm bore pipe ISI marked light grade GI tube bent to shape required not less than 1.20m long fixed with and including MS flat iron clamps made out of 25x3 mm GI flat, bolts, nuts and washer etc., complete all as specified and as directed.
Supply & fixing MCB DB's SPN 8 way, IP-54, IK-09 double door, sheet metal enclosure, 240V, 200 amps rated copper busbar including suitable size of copper lugs for fixing of cable complete all as specified and as directed.
Supply and fixing MCB SPN 40 to 63 Amps ,10 KA, C Curve, 230 Volts ,50 HZ complete all as specified and as directed.
Supply and fixing MCB SP 6-32 Amps ,10 KA, C Curve, 230 Volts ,50 HZ complete all as specified and as directed.
S&F File Compactor push and full type single bay (height 2180mm, width-915mm) (SS1-1, SL1-1,TM1-2) Make Godrej/Methodex/Geeken) complete all as directed. .
SIMONS CONSTRUCTION (BID ID -3518560)
M/s K Moorthi (BID ID -3518199)
RPG AND COMPANY (BID ID -3518508)
M/s Ramesh Lal (BID ID -3518269)
V CHINNA DURAI (BID ID -3518430)
M/s Harjas Construction & Waterproofing Co (BID ID -3518213)
ANITA VARMA ENTERPRISES (BID ID -3518129)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
BOQ_833630.xls
BOQ • 0.30 MB
8671TENDER.pdf
Tender Documents • 1.03 MB
Download all tender documents and submit your bid