Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.4 LAccepted-AOC 47 C MODEL TOWN EXTENSION LUDHIANA PB | LUDHIANA | PUNJAB | 141001 | L1 | Accepted-AOC DUE TO LOWEST BID. | |
| 2 | L2₹16.1 L+₹1.2 L (8.40%)Rejected-Finance | L2 | Rejected-Finance DUE TO HIGHER BID. | |
| 3 | L3₹16.9 L+₹2.1 L (14.0%)Rejected-Finance | L3 | Rejected-Finance DUE TO HIGHER BID. |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
26 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Ferozepur Cantt
GE (West) Ferozepur Cantt
Certain BR repair and periodical services to Abdul Hamid Enclave A Zone AND B Zone (near unit of AP) under AGE BR I of GE (West) Ferozepur Cantt
2023_MES_609671_1
802023/GE-43/E8
Open Tender
Civil Works
Item Rate
270 days
Ferozepur Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (West) Ferozepur Cantt
₹50,000
Yes
23 Oct 2023
30 Aug 2023
28 Sept 2023
30 Aug 2023
26 Sept 2023
13 Sept 2023
Amount
M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and directed.
M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on ceiling including cornices complete all as specified and directed.
M&L washing rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed.
M&L washing rubbing down and stopping of cement based painted surface and applying one coat of cement based paint on wall surfaces including proper curing complete all as specified and directed.
M&L preparation of wood or wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint on already prepared old wooden surfaces complete all as specified and directed.
M&L for preparation of old decorative steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint on already prepared old steel surfaces complete all as specified and directed.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.50sqm each complete all as specified and directed.
All as per ser item No. 7 here-in-before but exceeding 1.5sqm and not exceeding 4.00 sqm.
Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and refixing in the same opening after resecuring or easing complete all as specified and directed.
S&F pressed steel frames made of 1.25mm thick mild steel sheet of profile 105mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long mild steel conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.
All as per ser item no 11 above here-in-before but size 125mmx60mm with double rebate.
S&F 40mm thick flush door shutters, solid core construction, with particle board core and plywood face panels, commercial type, both faces are covered with decorative face veneer with lipping/frame to match, complete all as specified and directed.
S&F factory made 35mm thk, framed panelled shutters of 2nd class hard wood (any no. of panels) with panels of timber flat on both sides feather edged or of veneered particle board medium density wood, with commercial face venners and fitted to chowkats, the size of rails and styles as per IS 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F factory made glazed and skeleton shutters 35mm thick of 2nd class hard wood with or without shash bar (hollock) open rebated and prepared to receive glass, gauze etc divided into square with plain chamfered or rounded and rebated sash bar (any no of bars) for securing glass, gauzed etc sizes of members of shutters as specified in SSR Part-1 sec-8 clause 8.20(a) complete all as specified and directed.
S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube supplying and fixing as per specification complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
M&L PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in filling of steel chowkhats complete all as specified and directed.
Taking down Aluminium windows shutters only (area exceeding 0.5 sqm but not exceeding 1.5 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket & new Aluminium cleats of existing make and also refixing the locks & rollers in existing position with and including new screws including refixing the window shutters in same opening complete all as specified and directed.
S&F Powder coated of (any colour) Aluminium window, ventilator etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding Aluminium frame of approved size, including necessary joining cleats, glazing clips, powder coated Aluminium snap beading, screws, including necessary anodised Aluminium fittings like handles etc complete all as specified as per manufacturers instructions, complete all as specified and directed. Note: EPDM Rubber beading/gasket measured and paid seperatley. Make (Aluminium frame) : Jindal /Hindalco
S&F EPDM Rubber beading around glass in Aluminium windows /ventilator shutters complete all as specified and directed.
Hacking out old broken glass (any thickness,size quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and directed.
S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and directed.
S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality, glass is ground or obscured or frosted, on one side and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
S&F 200mm long Aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.
S&F 150mm long Aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.
S&F 150mm extruded Aluminium alloy handle, complete all as specified and directed.
S&F 150mm in repair extruded Aluminium alloy handle, complete all as specified and directed.
S&F 125mm extruded Aluminium alloy handle complete all as specified and directed.
S&F 125mm extruded Aluminium alloy handle in repair complete all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt 300mm length, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-Aluminium alloy and fixed complete all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt 250mm length, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-Aluminium alloy and fixed complete all as specified and directed.
S&F in repair Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-Aluminium alloy and fixed all as specified.
S&F 100mm size Butt hinges, medium weight, cold rolled mild steel as fixed in repairs all as specified and directed.
S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/ bronze hinge pin complete all as specified and directed
S&F 150 mm floor door stopper of Aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and directed.
S&F 150 mm floor door stopper of Aluminium alloy body and tongue, anodized with hard drawn steel spring as fixed in repair complete all as specified and directed.
S&F 300 mm Mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.
S&F in repair 300 mm Mild steel helical door spring including roller and roller plate complete all as specified and directed.
M&L cutting holes in brick wall built in cement mortar for fixing hold fasts and making good dismantled portion in cement mortar 1:3 or in cement concrete 1:2:4 type B-1, depth of embeded portion of hold fasts measured from the face of jamb into wall exceeding half brick but not ,exceeding one brick complete all as specified and directed.
Dismantling wrought iron work in any position complete all as specified and directed.
S&F mild steel framed work such as grills/guard bars, cooler stand, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290(Gde-E-165) complete all as specified and directed.
Dismantling plain or corrugated steel sheet/fibre sheet on roof covering complete all as specified and directed.
S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with J- type or L- type hook bolts complete all as specified and directed.
S&F Pre-painted galvalume Aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.
M&L forming jambs etc built in cement mortor 1:6 to openings including cutting toothing and properly bonding into to old work also facing, jointoing and pointing to match to existing work complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
M&L preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparing new surfaces of steel of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified and directed.
M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 meter mean radius complete all as specified and directed.
All as per item No 53 here-in-before but using old bricks retrieved from demolition under item 52 here-in-before including cleaning and removal of mortar from old bricks.
M&L brick work with sub class B bricks straight or curved on plan to any radius in half-brick thick wall built in cement mortar 1:4 complete all as specified and directed
Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified and directed.
M&L internal rendering 10mm thick in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished fair and even complete all as specified and directed.
M&L rendering/plastering on external surface of the wall of 15mm thick in cement mortar 1:4 on brick wall surfaces, surfaces finished even and fair complete all as specified and directed.
M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed.
M&L preparation of newly plastered undecorated surfaces of walls & applying three coats coats of white wash complete all as specified and directed.
M&L preparation of newly plastered undecorated surfaces of ceiling & applying three coats of White wash complete all as specified and directed.
M&L preparation of newly plastered surfaces of walls and applyings two coats of cement base paint over a coat of primer complete all as specified and directed.
Dismantling of floor hearth and wall tilling including mortar bedding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L Non skid ceramic coloured (colour & shade as approved) tiles of 7 mm to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
M&L Non skid ceramic coloured (colour & shade as approved) tiles of 7mm to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
M&L for glazed coloured ceramic tiles of size 300mmx200mm / 350mmx250mm / 450mmx350mm and 7 mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar complete all as specified and directed.
M&L Granite 18mm-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 15mm thick screed in cement mortar 1:4 with pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L machine cut Kota stone slab flooring 20mm-25mm thick over 20 mm cement screed base cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as per specified.
M&L Kota stone slab 20mm-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick rendering in cement mortar 1:4 and jointed as per ser item no 85 here-in-before.
S&F machine pressed precast 60mm thick concrete interlocking paver block (M-35) cement concrete tiles with grey cement and pigment of approved design & pattern as approved by GE, set over & including 50mm sand cushion complete all as specified and directed. Note :- Sand will be measured and paid seperately
M&L 50 mm thick PCC, type B-1, 1:2:4 (using 20mm graded stone aggregate) as in flooring in, surface finished even and smooth without using extra cement complete all as specified and directed.
M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors as in floor set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed.
S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed.
Taking up or down 15 mm existing steel tubing and connections and Re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing complete all as specified and as directed. Note:- Cost of new fittings, if required shall deemed inclusive of quoted rates.
All as per ser item No. 76 here-in-before but 20mm dia.
Demolition of boarding of any description and in any position complete all as specified and directed.
S&F 16mm - 18mm Solid PVC board plain colour, fixed with screws or adhesive with complete accessories (magnetic catcher, knobs) as in shelves/shutters with rebates fixed on PVC on three sides as in supporting block to shelves complete all as specified and directed. Make : Rajshree, Echon or equivalent as approved by GE
S&F Continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified and directed.
S&F hasp and staple of Aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed.
S&F steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and directed.
Demolition of unreinforced cement concrete in any position complete all as specified and directed.
M&L 75mm thick, PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.
S&F 15mm bore fancy type chromium plated Stop cock cast Copper alloy screwed down, high pressure screwed both ends for iron pipe or union as fixed in repairs complete all as specified and directed.
S&F Brass Chromium plated Angle cock with long shank/flange and cup (concealed type) 15 mm dia bore screwed down with crutch handle both end screwed for iron pipe or union as fixed in repairs complete all as specified and directed.
S&F 15 mm fancy type chromium plated Stop cock with long shank and cup (concealed type) screwed down, high pressure with crutch handle both end screwed for iron pipe or union as fixed in repairs complete all as specified and directed.
S&F 15mm bore bib tap fancy type of chromium plated cast copper alloy brass, screwed down screwed for iron pipe or for brass ferrule in repair complete all as specified and directed.
S&F 15mm chromium plated wash basin mixer for mixing hot and cold water screwed down for iron pipe and fixed and waste system with 450mm long braided hoses in repairs complete all as specified and directed.
S&F 15mm dia chromium plated Sink cock swan neck regualar spout with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make: Prayag Cat No 9214 or techno commercially equivalent in approved makes
S&F PVC connection both end brass union and length 450 mm long for 15 mm bore pipe complete all as specified and directed.
S&F PVC connection 15mm x 600mm size with PTMT nuts in repair complete all as specified and directed.
S&F PVC waste pipe with waste fittings, 32 mm bore size for sinks,WHB etc with long screwed shanks and fly nuts in repair complete all as specified and directed.
S&F rotational moulded Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed.
S&F Gun-metal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe and as fixed in repairs complete all as specified and directed.
S&F ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed to union etc of size 20mm dia and as fixed in repairs complete all as specified and directed.
S&F ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed to union etc of size 15mm dia and as fixed in repairs complete all as specified and directed.
S&F 125mm dia chromium plated grating doom with waste hole of PTMT (minimum weight 40 gms) in repair complete all as specified and directed
S&F Seat Cover (White colour) for pedestal pattern as fixed in repairs complete all as specified and directed.
S&F Seat cover (white colour) for Anglo Indian pedestal pattern as fixed in repair complete all as specified and directed.
S&F vitreous China WHB white flat back size of 580mmX450mm excluding taps waste chain and plug and porcelien stopper but including brakets 32mm dia waste pipe as fixed in repairs complete all as specified and directed.
S&F Brass chromium plated bottle traps 32mm dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union, cap and fixing in repair complete all as specified and directed. Make: Prayag or equivalent in approved makes
M&L 32mm dia waste coupling fittings brass chromium plated for steel sinks/wash hand basin etc., full or half threaded as fixed in repairs complete all as specified and directed.
S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.
S&F vitreous China white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified and directed.
S&F vitreous China wash down water closet pan semi-pedestal pattern (Anglo-Indian Type) including PVC seat cover and connection to drain or out going pipe and to flush pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified and directed.
S&F vitreous China white squatting pan Orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 mm to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair complete all as specified and directed.
S&F corner glass shelves 300 mm radius, 8mm thick as per sample radius for bath room, fixed on suitable support of brass chromium plated clips complete all as specified and directed.
S&F 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union in repair complete all as specified and directed.
S&F brass chromium plated 20mm dia towel rail of 60cm long fixed with brackets at its ends as fixed in repairs and complete all as specified and directed.
S&F chromium plated Soapdish oval /squaretype as fixed in repairs and complete all as specified and directed.
S&F in replacement of pressure JET for EWC including PVC connection and chromium plated fitting as fixed complete all as specified and directed.
S&F Syphon Kit for PVC flushing cistern of 10 litre capacity as fixed in repairs complete all as specified and directed.
S&F wash hand basin, flat back 550mmx400mm vitreous China (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.
S&F 1mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, chromium plated coupling & cantilever brackets embedded in cement and sand mortar in wall, overall size of sink 495mmx420mm, bowl size 410mmx330mmx 160mm as in repair complete all as specified and directed.
S&F 1.00mm thick stainless steel plate racks of size 750mmX600mmX250mm complete all as specified and directed.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings heads shoes bends swan-necks etc., complete all as specified and directed.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.
S&F 75mm dia PVC (SWR) bends any radius, complete all as specified and directed.
S&F 110 mm dia PVC (SWR) bends any radius, complete all as specified and directed.
S&F 75mm dia Junction single (Single or double T) equal or unequal, complete all as specified and directed.
S&F 110mm dia Junction single (Single or double T) equal or unequal, complete all as specified and directed.
S&F 75mm dia PVC (SWR) bends any radius with access oval door, complete all as specified and directed.
S&F 110 mm dia PVC (SWR) bends any radius with oval access door, complete all as specified and directed.
S&F 75 mm bore PVC (SWR) Vent Cowl, complete all as specified and directed.
S&F 110 mm bore PVC (SWR) Vent Cowl, complete all as specified and directed.
Demolition of cement concrete in sunken portion any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L 15mm thick cement mortar 1:3 with WPC on walls as well as on sunken floor portion finished even and smooth using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid for separately.
Supply only water proofing compound.
M&L applying evenly a tack coat of in dustrial bitumen of grade 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.
M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gm/sqm) land on primed surface by forced application complete all as specified and directed.
M&L PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in filling under sunken portion complete all as specified and directed.
M&L 25mm tick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floor finished even and rough to receive top layer complete all as specified and directed.
Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered in writing complete all as specified and directed.
Demolition of mud phuska on roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed.
M&L bedding screed or bedding layer 15 mm thick in cement mortar 1:4 mixed with water proofing compound as directed on roof of concrete surface finished even and smooth without using extra cement including preparation and cleaning of old concrete surfaces or racking out joints in old roof treatment etc complete all as specified and directed. Note:- Water proofing compound to be measured and paid separately.
M&L tack coat of industrial bitumen of grade 85/25 @ 1.20 Kilogram per square metre over a coat of bitumen primer @ 0.30 litre per square metre including preparation of roof surfaces complete all as specified and directed.
M&L polythene film (transparent) 150 micron with 150mm end & side laps bonded with 80/100 grade of bitumen and laid on roof, complete all as specified and directed.
M&L mud phuska, 80mm thick, average consolidated thickness, on flat roofs including 25 mm thick mud plaster complete all as specified and directed.
M&L brick tiles 40mm thick laid over a 25mm thick layer of mud mortar (mud phuska) and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement as the work proceeds complete all as specified and directed.
All as per ser item No: 142 above herein before but except tiles. (tiles retrieved from item No: 136 shall be reused)
S&F flush pointing to roof tiles in cement mortar 1:3 tiles complete all as specified and directed.
S&F spindle for 15mm dia for chromium plated brass fancy Bib Cock as fixed in repairs complete all as specified and directed.
S&F spindle for 15mm dia for chromium plated fancy brass Pillar Cock as fixed in repairs complete all as specified and directed.
Easing of wooden window shutters/CB Shutters (One Unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolts including necessary nail and screws etc. complete all as specified and directed.
Easing of wooden door shutters (One unit shall comprise of one panelled or skeleton door shutter irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolts including necessary nail and screws etc. complete all as specified and directed.
M&L welding in repairs exceeding 6mm but not exceeding 9mm in length, thickness of metal to be welded complete all as specified and directed.
S&F chromium plated handle for Bib tap as fixed in repairs complete all as specified and directed.
M/S N Maini Constrution
CHETAK CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .