Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 LAccepted-AOC C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L1 | Accepted-AOC Being First Lowest | |
| 2 | L2₹13.4 L+₹39,100 (3.02%)Rejected-Finance | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹14.3 L+₹1.3 L (10.1%)Rejected-Finance RM 01 RIDHISIDHI I SRI GANGANAGAR 335001 RAJ | SRI GANGANAGAR | SRI GANGANAGAR | RAJASTHAN | 335001 | L3 | Rejected-Finance Other Than First Lowest | |
| 4 | L4₹14.6 L+₹1.6 L (12.2%)Rejected-Finance | L4 | Rejected-Finance Other Than First Lowest | |
| 5 | L5₹15.8 L+₹2.8 L (21.5%)Rejected-Finance 12 MARUTI NAGAR SIKKA HANUMAN MANDIR SIKKA SIKKA JAMNAGAR GUJARAT 361140 | JAMNAGAR | GUJARAT | 361140 | L5 | Rejected-Finance Other Than First Lowest |
Tender Value
Refer Docs
EMD Value
₹37,000
Closing Date
20 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lalgarh Jattan
GE Lalgarh Jattan
SPL REPAIR TO BLDG NO T-136 (LAO) AT LGJ MIL STN
2023_MES_576453_1
8933-62/22-23
Open Tender
Civil Works
Item Rate
180 days
GE Lalgarh Jattan
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
GE Lalgarh Jattan
₹37,000
Yes
9 Mar 2023
21 Jan 2023
23 Feb 2023
21 Jan 2023
20 Feb 2023
6 Feb 2023
Amount
B/R Portion Demolition of cement concrete of any description (unreinforced) and in any position not otherwise specially provided for complete all as specified and directed by Engr-in-charge.
Demolition of reinforced cement concrete of any description and in any position not otherwise specificlly provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engr-in-charge.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed by Engineer in Charge.
Dismantling asbestos cement ( corrugated, semi-corrugated, plain etc.) sheets including ridges as in roof covering complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster on brick terrazoo on brick/ stone walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engr-in-charge.
S & F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.(design as approved by Engineer-in-Charge complete all as specified and directed by Engineer-in-Charge
S & F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.(design as approved by Engineer-in-Charge complete all as specified and directed by Engineer-in-Charge
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
Dismantling timber scantling in fillets, rails, posts, rafters, purlins etc. n exc 40 sqcm in section unframed work complete all as specified and directed by Engineer-in-Charge.
M&L for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:6 on wall finished even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge.
M&L for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 on wall finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for two coats of acrylic distemper over 3mm thick wall care putty on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-charge.
M&L for two coats of cement base paint on newly plastered surfaces incl preparation etc. wall complete all as specified and directed by Engr-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engr-in-charge.
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm but not exc 0.38 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engr-in-charge.
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and as directed by Engineer in Charge.
Material and labour for Non Skid ceramic coloured tiles (jointless) 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement over and including 15mm thick screed base in CM (1:6) complete all as specified and directed by Engineer-in-Charge
M&L for glazed ceramic coloured tiles of size 450 x 300 x 7 mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engr-in-charge.
Dismantling of stone slabs and tiles of any description or thickness and in any position in floors, aprons etc. complete all as specified & directed by Engineer-in-Charge.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed bed in CM 1 : 6 complete all as specified and directed by Engr-in-charge.
M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid over cement screed base laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match shade of the slab including rubbing and plishing complete all as specified and directed by Engr-in-charge.
M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry mixed with pigment to match shade of the slab including rubbing and plishing complete all as specified and directed by Engr-in-charge.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-in-charge.
M&L for reinforced cement concrete 1:2: 4 type B0 using 12.5 mm graded stone aggregrate in Chajjas complete all as specified and as directed by Engineer in Charge.
M&L for reinforced cement concrete M-25 Normal mix using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m Span all as specified and as directed by Engineer-in-Charge. NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule
M&L for formwork to sides and soffits of floor or roof beams, beam hunchings, girders, bressummers, lintels, cantilevers, etc. also splays between floors and beams, etc. fair finish surface of concrete flat all as specified and directed.
S&F mild steel TMT bars(Fe-500D) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clip complete all as specified and directed by Engr-in-charge.
S&F for mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clip all as specified & directed by Engineer-in-Charge.
M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.
M&L for continous brick edging with fly ash bricks old size bricks, with width equal to the width of the brick; liad dry on end vertically all specified and directed.
Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-charge.
Taking down chowkhats or frames exc 1.5 sq. m but n.exc 4.0 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-charge.
Supply and fixing of Fibre glass Reinforced plastic (FRP) door frame of required built in colour in three legged of cross-section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick including laminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood in all three legs frame shall be covered with fibreglass from all sides MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in- charge.
Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled doorshutter conferming to IS:14856-2000 of required colour and made with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge.
S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anosied and fixed type B-21 complete all as specified and directed by Engr-in-charge.
S&F 200 mm long aluminium anodised barrel tower bolt, of extruded sections complete all as specified and directed by Engr-in-charge.
S&F for 150 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and directed by Engr-in-charge.
S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed by Engr-in-charge.
S&F powder coated aluminium frame/shutter for doors, windows, ventilators and aluminium partition with one or more rebates including jointing cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete with locking arrangements for fixing with powder coating on aluminium sections, minimum thickness of poweder coating shall be 50 micron as per the specification. The top and bottom horizontal members and vertical members adjacent to wall shall be fixed with floor, ceiling, walls and cills where required and fixed with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fastners. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required complete in all respect all as specified & directed by Engr-in-Charge. Make of Al Section : Jindal / Hindalco / NALCO
S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing exc 0.55 Kg/m (1.50 to1.80mm thick) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (01 No) hinges type B-21 100 mm long (2 nos suitable handle (01 No) in each window shultter and necessary accessary as required complete all as specified and directed by Engr-in-Charge. (Note : Glass will measured and paid separately)
S & F for Aluminium anodised (Powder coated) Three track sliding window frame with shutters (two glazed and one gauged shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc with the following section of frame and shutter (A) Sections for frame (i) Top and verticals 92 x 29.50 x 1.30 mm thick (ii) Bottom 92 x 29.50 x 1.20 mm thick. (B) Sections for shutter (i) 'A' section 39 x 20 x 1.50 mm thick (ii) 'Interlock' section 39 x 20 x 1.50 mm thick (iii) 'H' section 41 x 20 x 1.10 mm thick
S & F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
M&L double action floor door spring hydraulically regulated,made up of minimum 1.25mm thick aluminium sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other patrs made of mild steel heavy duty complete all as specified.
S&F mild steel mortice lock 4 lever vertical type, size 100mm brass complete all as specified.
S&F for 4.8 mm thick sheet glass ordinary quality and glazing with aluminum snap beading of any size of glass in each pane with solar control film 25 micron reflective type sticked to glass panes as per instuction of manufactures all as specified and directed by Engr-in-charge.
M&L for 4.0 mm thick figured glass, ordinary quality and glazing with aluminium snap beading of any size in each panes complete all as specified and directed by Engineer - in - Charge.
S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe -165 complete all as specified and directed by Engineer - in - Charge.
M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, with preparation of new or previously untreated surfaces priming with one coat of red oxide & finish with two coats of synthetic enamel paint ordinary tint complete all as specified and directed by Engr-in-charge.
S&F in repairs for stainless steel curtain rods, standrad quality, not less than 25mm dia with heads , etc. complete all as specified and directed by Engr-in-charge.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-charge.
S&F in repair brass hat pegs, solid body, 125 mm to 175 mm (4 legs) complete all as specified and directed by Engr-in-charge.
S&F in repair towel rails 20 mm dia, 'D' type 600mm long brass chromium plated superior quality brass chromium plated fancy type complete complete all as specified and directed by Engr-in-charge.
S&F in repair chromium plated fancy type soap dish complete all as specified and directed by Engineer-in-Charge
S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot rests (excl flushing cistern) but including CI 'P' trap set in and including concrete fixed complete all as specified and directed by Engr-in-charge.
S&F in repairs PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle and telescopic pipe and connection to pipe and flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed by Engr-in-charge.
S&F in repair vitreous china wash hand basin coloured Flat back of size 550x400mm, long screwed shank fly nut flange end including cutting for and pinning in ends of brackets in 1:3 CM including 32mm dia chromium plated waste coupling/trap complete all as specified and directed by Engr-in-charge.
S&F in repair pillar tap, fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with or without lettered with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed by Engr-in-charge. Note : Wt should not be less than 450 gms
S&F in repair bib tap 15mm bore cast copper alloy chromium plated long body fancy type with capston head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-charge.
S&F in repair CP brass stop/angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup complete all as specified and directed by Engr-in-charge.
S&F in repair CP brass stop valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup (Concealed type) complete all as specified and directed by Engr-in-charge.
S&F in repair, shower rose, 125 mm size, brass chromium plated with sweivel joint complete all as specified and directed by Engr-in-charge.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engr-in-charge.
Dismantling of water tanks of capacity exc 500 and n.exc 1000 ltrs and removing from site all as specified and directed.
S&F for Rotational moulded polythene water storage tank 500 ltr capacity vertical with closed top hoisted and fixed in position all as specified in SSR part-I. complete all as specified and directed by Engr-in-charge.
S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore fixed in repair all as specified and as approved by GE/Engineer-in-Charge.
S&F in repair ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20mm dia bore pipe complete all as specified and directed by Engr-in-charge.
Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipe complete all as specified and directed by Engr-in-charge.
,---ditto--- all as per srl item No 68 above but 20mm dia pipe complete all as specified and directed by Engr-in-charge.
S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as specified and directed by Engr-in-charge.
,---ditto--- all as per srl item No 70 above but 20mm dia pipe complete all as specified and directed by Engr-in-charge.
Dismantling of cast iron pipes, jointed in cement mortar and tabing out of trenches if required upto 100/75mm dia complete all as specified and as directed by engineer-in-Charge.
S&F in repairs 32 mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed by Engr-in-charge.
S&F in repair stainless steel kitchen plate rack made out with 1mm thick sheet of size 24" x 24" x 10" including taking down existing wooden plate rack complete all as specified and directed by Engineer-in-Charge.
S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.
Supply & fixing 100 mm bore spun cast iron pipe waste and vent pipe in any length with or without ears laid in trenches/floor/wall including clamps, jointing with necessary coupling complete all as specified & directed by Engr-in-charge.
Supply & fixing 75 mm bore spun cast iron pipe waste and vent pipe in any length with or without ears, with cement joint and fixed to wall complete all as specified & directed by Engr-in-charge.
Supply & fixing 75 mm bore spun cast iron pipe waste and vent pipe in any length with or without ears laid in trenches/floor/wall including clamps, jointing with necessary coupling complete all as specified & directed by Engr-in-charge.
S&F in repair 100mm bore cast iron type plain bends (any radius) dimining pieces or tapers (larger bore measured) door fixed with necessary coupling complete all as specified and directed by Engr-in-Charge. Make:- NECO
S&F in repair 75 mm bore cast iron type plain bends (any radius) dimining pieces or tapers (larger bore measured) door fixed with necessary coupling complete all as specified and directed by Engr-in-Charge. Make:- NECO
Supply & fixing 100mm bore cast iron branch pieces single ( equal or unequal ) ordinary or inverted ( spigot or socket type ) or with parallel branches fixed with cement joints complete all as specified & directed by Engineer-in- charge.
Supply and fixing 50 mm dia cast iron 'Cowl " complete all as specified and directed by Engineer-in-Charge.
S&F in repairs cast iron type P trap floor trap 75 mm bore with CP grating including jointing to waste pipe fixed with necessary coupling arrangement complete all as specified and directed by Engineer-in-charge. Make:- NECO
M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base below floors complete all as specified and as directed by Engr-in-Charge.
M&L Machined pressed precast concrete interlocking paver block glossy with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with over Fazilka sand cushion all as specified and directed. (Sand will be measured and paid seperatly)
Suply only Fine aggregate (sand) for Cushioning (Fazilka sand) all as specified and directed
M & L for filleting in any position and to any shape in Cement line Mortar (1:1:6) including all mitres, stops etc. section of fillet n exc 25 sqcm complete all as specified and as directed by the Engineer-in-Charge.
M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in coping and the like including weatjeromg.slightly rounded or chamfered angles and throating, as directed including necessary formwork etc. complete all as specified and directed by Engineer-in-charge.
S & F rolled mild steel, Roof trusses (framed ), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle,channel or flat sections) including distance pices,cleats etc.Fe - 410-W (Gde-E- 250) quality "A" complete all as specified and directed by Engineer-in-charge.
M & L for old size Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6m mean radius, in lime mortar 1:4 complete all as specified and directed by Engineer-in-charge.
M&L for Collapsible steel gates top hung consisting of channel pickets ,pivoted flat bars,top and bottom runners,brass handles etc. erected in position and securing runners with holdfasts and brackets complete all as specified and directed.
M & L Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet PVC frame as per specifications and drawing and including taking down existing wood wall panelling complete all as specified and directed.
M & L for 12mm thick prelaminated partcle board interior grade prelaminated both side with decorative choice lamination ISI marked fixed to aluminium frame as in partition, cupboard and similar work and fancy type knob complete all as specified & directed.
E/M PORTION Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulators, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces complete all as specified and directed by Engr-in-Charge.
Taking down MCB with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed by Engr-in-Charge.
Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engr-in-Charge.
M&L for concealed Point wiring with two single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with modular sheet top cover of required module for mounting switches, sockets etc complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour for One Light point controlled by one, one way switch complete all as specified and directed by Engr-in-Charge. .
,--ditto--- all as per serial item No 97 above, but for One ceiling/exhaust fan point controlled by one switch and regulator complete all as specified and directed by Engr-in-Charge.
,--ditto--- all as per Serial item No 97 above, but for One 3 pin 5 amps switch socket outlet point on same board with other switches complete all as specified and directed by Engr-in-Charge.
,--ditto--- all as per Serial item No 97 above, but for One 3 pin 5 amps switch socket outlet point on independent board complete all as specified and directed by Engr-in-Charge.
,--ditto--- all as per Serial item No 97 above, but for wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for 15 amps power point complete all as specified and directed by Engr-in-Charge.
Supply and fix piano switch flush button single pole one way 5/6 Amps complete all as specified and directed by Engineer-in-Charge.
Supply and fix socket outlet 2 in 1, 2/3 pin 6 amp flush type 250 volts AC complete all as specified and directed by Engineer-in-Charge.
Supply and fix socket outlet 2 in 1, 3 pin 5 amp and 15 amp flush type 240 volts AC complete all as specified and directed by Engineer-in-Charge.
Supply and fix piano switch 15 amp flush type 240 volts AC complete all as specified and directed by Engineer-in-Charge.
Supply and fix piano switch flush button single pole one way 5/6 Amps complete all as specified and directed by Engineer-in-Charge.
S & F batton integrated LED light fitting 1 x 20 W, 230 V integral sleek polycarobonate LED Channel with white acrylic cover to roof/ceiling/wall with necessary wooden/PVC blocks etc and connecting with 2 core flexible PVC insulated multistranded copper conductor from ceiling rose to fitting incl taking out old one complete all as specified and directed by Engineer-in-Charge. Note : (i) With lumen efficiency in excess of 100 lumens par watt and driver efficiency>85% (with pf>0.95) (ii) CRI>80 (iii) The warranty of LED fittings is 02 year after completion of liability period
S&F 2X2 ultra modern designed LED lumaniries LED light fitting 1 X 36 W, 230V LED channel with white acrylic cover including making connection complete all as specified and directed
Supply and fix ceiling rose surface bakelite two to three terminals/plate 5 amps complete all as specified and directed by Engr-in-Charge.
S & F stepped type fan regulator electronic solid state with stepssuitable for 1200/1400mm sweep ceiling fan working on 230V AC complete all as specified and directed by Engr-in-Charge. .
Supply and fix Vertical MCB DB TPN 4 ways for 415 volts double door including MCCB 125 Amp 16 KA as incommer with bus bar rating 200 Amps vertical type dust and vermin proof including fixing on wooden board or recessed on wall complete all as specified and directed by Engr-in-Charge.
Supply and fix sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbar flush/surface mounting double door including wooden board complete all as specified and directed by Engr-in-Charge.
Supply and fix MCB single pole 240 volt 6-32 amps 10 KA, complete all as specified and directed by Engr-in-Charge.
Supply and fix MCB SPN 6-32 amp, 240 volt 10KA complete all as specified and directed by Engr-in-Charge.
Supply and fix MCB SP 40 amp, 240 volt 10KA complete all as specified and directed by Engr-in-Charge.
Supply and fixing PVC Blanking Plates one way with internal lock complete all as specified and directed by Engr-in-Charge.
Material & Labour for Sub Main Wiring with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable with and including 6 Sqmm copper green colour earth wire complete all as specified and directed by Engr-in-Charge. NOTE - Two run of 6 sq.mm & One run of 6 sq.mm & One run of PVC conduit with accessories shall be measured as One length.
Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15mm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire galvaniseed iron or steel and thimbles and other end of the earth wire connected to earthing test point and prortected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:2:4) type B1 and CI cover with frame all as shown in electrical plate No 3 of MES Schedule Part I of SSR 2009 complete all as specified and directed by Engr-in-Charge. Note : (i) 20mm dia GI pipe for watering to be provided with a socket and plug and should be 10cms above ground level (ii) Outer edge of earth pit will be 1 metre away from the outer edge of PCC chamber (iii) GI wire upto DBs earth connection is included in this item (iv) Water pipe should be provided in slanting position.
S&F sheet metal enclosure single pole and neutral with 02 Pin and earth plug and socket complete with 01 single pole 20 Amps 240volts, MCB complete incl necessary fixing arrangement and all incoming and outgoing electric connection complete all as specified and directed by Engr-in-Charge. .
Supply and fix fresh air fan 230 mm sweep 240 vot 50 Hz plastic body complete with louvers and including making hole in wall fixing complete all as specified and directed by Engr-in-Charge.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 23 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BE. Five star rated with brushless direct current motor (BLDC) after dismantling old item deposite to MES sote complete all as specified and directed by Engr-in-Charge.
S & F exhaust fan, steel body AC single Phase, 230 V of size 300 m sweep with, blades, and frame and louvers, after dismantling old item deposite to MES store complete all as specified and directed by Engr-in-Charge.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
M/s Karan Builders
KHANNA CONSTRUCTIONS
M/s Tarun Traders
SHIVA CONSTRUCTION COMPANY
AJAY CONSTRUCTION COMPANY
M/S Shree Ram Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .