Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.7 LAccepted-AOC NO 46 PERUMAL KOIL STREET MISSION STREET CUTTING PUDUCHERRY 605 001 | PONDICHERRY | PUDUCHERRY | 605001 | ₹15.7 L | L1 | Accepted-AOC found to be in order |
| 2 | L2₹16.9 LRejected-Finance NO 198 M G ROAD MUTHIALPET PUDUCHERRY 605 003 | PONDICHERRY | PUDUCHERRY | 605003 | ₹16.9 L | L2 | Rejected-Finance In order |
| 3 | L3₹19.0 LRejected-Finance KARAIKAL | KARAIKAL | PUDUCHERRY | 609601 | ₹19.0 L | L3 | Rejected-Finance In order |
Tender Value
₹17.4 L
EMD Value
₹43,000
Closing Date
1 Dec 2022, 11:00 amClosed
Superintending Engimeer Oand M PR
Superintending Engimeer Oand M PR, Electricity Department,Puducherry
Supply and laying of 11KV (E) 3x 400 Sq mm Aluminum core XLPE insulated, armored HT UG Cable, erection of steel mounted super pole structure for the proposed Hospice SS at the junction of Laporte Street and Mission Street, Puducherry.
2022_OMPOW_11365_1
e-06/ED/EE-URBAN/JE/22-23
Open Tender
Electrical Works
30 days
Electricity Department
Please refer Tender documents.
3 documents required · 3 mandatory
₹590
Yes
₹43,000
Yes
10 May 2023
16 Nov 2022
1 Dec 2022
16 Nov 2022
1 Dec 2022
16 Nov 2022
16 Nov 2022 - 24 Nov 2022
Fabrication, supply and erection of Steel Mounted Super pole structure suitable for erection of 1 No. of 11/0.433KV, 630 KVA Distribution Transformer and a 5 Panel RMU as per the specification and drawing enclosed. (Before erection at site all steel structure materials shall be sand blasted, cleaned and all burrs before applying one coat of epoxy primer paint. After erection at site two coats of exterior epoxy paint shall be applied to the structure as per the colour guidelines given by the Engineer -in-charge with operator handling support.)
Earthing of Steel Mounted Super pole structure by using 50 mm dia G.I. pipe including excavation of earth pit, fabrication of earth pipe, providing required charcoal, salt and earth pit with lid as per the direction of the Engineer -in -charge.
Supply of 11KV (E) 3 Core 400 Sq.mm XLPE HT UG Cable (Conforming to IS:7098)(Part-11-1985)
Supply of 11KV (E) 3Core 95 Sq.mm XLPE HT UG Cable (Conforming to IS:7098)(Part-II-1985)
Supply of 3.5 Core 400 Sq. mm LT UG cable HR PVC Insulated armoured PVC sheathed cable
Supply of Cast Iron pipe of 150mm Dia. for cable crossing of drains, road, sanitary and water supply lines and the like as per IS.1239/part-1/2004 as required in the Bituminous Road. (Road Cross / Drain Cross).
Supply of 100mm Dia GI Pipe (Conforming to IS: 1536-Part -IV) (Revised 2001) for pole raising.
Supply of RCC Trough as specified in the drawing enclosed.
Labour Charges for laying of one run of XLPE power cable of grade 11 KV of size 3C x 400 Sq.mm direct in ground including excavation of trench of size 0.5 m (W) x 1.2m (D), sand cushioning, protective covering with RCC trough and refilling the trench etc. as required in Bituminous Road (Road Cross / Drain Cross, including laying of 40mts. of UG cable through the C.I. Pipe.
Labour charges for providing of end loose of 11KV 3 x 400 Sq.mm, XLPE cable at both ends of HT UG Cable including RMU (as specified in HT Schedule) including excavation of trench of size 0.5 m (W) x 1.2m (D), sand cushioning, protective covering with RCC trough and refilling the trench etc. as required in Bituminous Road (Road Cross / Drain Cross.
Labour charges for Laying of one run of XLPE power cable of grade 11KV 3 x 95 Sq.mm direct in ground including excavation of trench of size 0.5 m (W) x 1.2m (D), sand cushioning, protective covering with RCC trough and refilling the trench etc. as required in Bituminous Road.
Labour charges for providing of 11KV 3 x 95 Sq.mm, XLPE cable for RMU raising, structure raising and end loose (as specified in the HT schedule) including excavation of trench of size 0.5 m (W) x 1.2m (D), sand cushioning, protective covering with RCC trough and refilling the trench etc. as required in Bituminous Road (Road Cross / Drain Cross.
Labour charges of 3.5 Core 400 Sq. mm LT UG cable HR PVC Insulated armoured PVC sheathed cable direct in ground ncluding excavation of trench of size 0.5 m (W) x 0.75m (D), sand cushioning, protective covering with Bricks and refilling the trench etc. as required in Bituminous Road (Road Cross / Drain Cross
Supply and providing of heat shrinkable long sleeve indoor type cable end termination kit including required aluminum ferrule and other joining materials suitable for 11KV 3 x 400 Sq.mm XLPE power cable in Modular type VCB Switchgear end as specified in the tender specification.
Supply and providing of heat shrinkable long sleeve indoor type cable end termination kit including required aluminum ferrule and other joining materials suitable for 11KV 3 x 95 Sq.mm XLPE power cable at Transformer end as specified in the tender specification.
Supply and providing of heat shrinkable long sleeve outdoor type cable end termination including required aluminum ferrule and other joining materials suitable for 11KV 3 x 95 Sq.mm XLPE power cable at Transformer end as specified in the tender specification.
Supply of Sub-Station Feeder Electric Pillar Box With 6 Way, 600 Amps bus for capacity having Aluminum Bus bar of 100 x 12 mm with 6 Ways fitted With 630 Amps HRC fuse base of S & S (Havells / Siemens) Make the Pillar Box design shall be similar to the existing model of Sub-Station Pillars available with the Department. The Pillar Box shall be supplied with two meomers Copper Fuse Links. Both the incomers shall have separate CT coil and Ammeter, and a common Voltmeter for both ways.
Foundation of SS Pillar Box as per the direction of the Engineer -in -charge.
Supply and providing of Pillar box Earthing using 50 mm G.I. Pipe (pipe supplied by Contractor) Including excavation of earth pit, fabrication of earth pipe linking with 25 x 4 mm G.I. Flat etc.
Supply of Metering arrangement to transformer (as per Technical Specification)
Supply of control box with Metering arrangement for street lights (as per Technical Specification)
Labour charges for metering arrangement to transformer
Labour charges for Metering arrangement for street lights
Transporting of HT UG cable and other required materials to site and devolution of balance materials from site as directed by the Engineer-in-Charge. Removal of excess wastage / debris from the site.
Supplying and concerting the cable route marker plate along the cable route at the location directed by the Engineer -in -Charge.
Preparation and supply of 5 copies of cable route layout drawing pasted using fevicol adhesive on cloth in the Scale of 1:5000 and submission of test report, Contractor's completion certificate and commissioning of 11 KV cables as specified in the Tender specification.
Removal of surplus earth, transportation of surplus materials, if any, to stores section office including coiling the unused cable provided with end caps for both cable ends and removal of cable drum and other materials and unloading at the central office section office as per the direction Engineer - in – Charge.
Mani Electrical Service
M/S. VENUS ELECTRICAL WORKS
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_11614.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid