REPAIRS TO ROLLING SHUTTER, STATIC WATER TANK, GATES, PATH, ALUMINIUM DOORS / WINDOWS AND CERTAIN OTHER CONNECTED B/R NATURE OF WORKS IN COD DEPOT AND AOR OF AGE B/R-I OF GE (WEST) AGRA

Amount

Taking down rolling shutter of any description with or without ball bearing & with/ without gear box incl taking out lugs etc incl top cover anchoring rod complete all as specified and as directed.

S&F steel rolling shutter of thickness of laths 1.25mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type incl greasing incl match to the existing suface with cement work and finishing complete complete all as specified and as directed.

Securing or easing to rolling shutters without taking off rolling shutter by cleaning / greasing /oiling / over oiling/welding in gear box / crank handle, channels, pulley, adjustment of lock device etc replacement of u/s ball bearing, rolling spring any description area of shutter n.exc 6.00sqm each complete all as specified and directed. Note :- Replaced part shall be measured and paid separately under respective item here in before.

Securing or easing to rolling shutters without taking off rolling shutter by cleaning / greasing /oiling / over oiling/welding in gear box / crank handle, channels, pulley, adjustment of lock device etc replacement of u/s ball bearing, rolling spring any description area of shutter exc 6.00sqm but n.exc. 32 sqm each complete all as specified and directed. Note :- Replaced part shall be measured and paid separately under respective item here in before.

S&F in repairs MS floor, safety lock suitable for rolling shutter 4 levers with duplicate keys fixed incl necessary cement repair complete all as specified and directed

M&L for replacement of damaged medium gde MS pipes of required dia in single length including necessary welding in existing rolling shutter to complete all as specified and as directed.

M&L for replacement of damaged top pinnion in existing rolling shutter as required complete all as specified and directed

M&L for replacement of damaged shaft spring suitable for large size rolling shutter of opening exc 3.00m wide, heavy duty, complete all as specified and as directed.

M&L for replacement of damaged shaft spring suitable for small size rolling shutter of opening n.exc 3.00m wide heavy duty, complete all as specified and as directed.

M&L for replacement of damaged shutter spring suitable for rolling shutter of opening exc 3.00m wide heavy duty, complete all as specified and as directed.

M&L for replacement of damaged rolling shutter spring suitable for rolling shutter of opening n.exc 3.00m wide heavy duty, complete all as specified and as directed.

M&L for replacement of damaged gear box connecting rod made out of 25mm dia GI medium grade tube complete all as specified and directed

Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 but except brick complete all as specified and directed

Demolition of cement concrete of any position not exc 15 cm thickness, above or below ground level, unreinforced complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for cut as required to facilitate demolition complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in walls complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Use & waste of formwork to faces of walls, and similar work etc.; vertical or to batter complete all as specified and directed.

M&L 75mm thickness PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified

M&L 75mm thickness PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in plinth protection complete all as specified

M&L for Chequered cement concrete tiles 300 x 300m x 25mm thick incl Screed bed 15mm thick in CM 1:6 set, jointed and pointed in near cement slurry in floors with grey cement and pigment complete all as specified and directed

M&L for 100mm thickness PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregate) as in hard standing incl necessary joint filling with bitumen complete all as specified

Taking down cement or cement lime plaster of any description on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in cement mortar 1:4 mixed with WPC as per manufacture instructions finished even and smooth w/o using extra cement complete all as specified and directed. (Note: WPC will be measured and paid separately)

Supply only integral water proofing compound (mix in cement mortar as per manufacture instructions) complete all as specified and directed

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F in repairs roof trusses (framed), trussed purlins sing angle iron, including distance pieces, cleats etc Fe 410-W (Gde E 250) quality A complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M & L for preparation of new steel surface over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc or insulation boards/ slabs/ blankets any thickness including cover fillets complete all as specified and as directed.

S & F in repair GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre. size of grid 605 mm x 605mm complete all as specified and as directed.

S &F in repair Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long (removing old hangers) complete all as specified and as directed.

S & F exposed metal frame ceiling with calcium silicate board 6 mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering/valley gutter etc complete all as specified and directed

S & F for pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed self tapping screws complete all as specified and as directed.

S & F for pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding/valley gutter to wall, fixed self tapping screws complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified and as directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls and fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.

S&F in repairs framed work such as grill grating, gates etc with ends of bars shouldered or riveted or forged into spikes frame guard bars etc all complete all as specified and as directed.

M&L in repairs 30mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm and not exceeding 0.5 sqm area fixed with and including one number SS clamps (grade-202) of flat 30mmxx 2mm, 150 mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment Note: The stone size and colour will be provided as per existing on walls and also finished the joints / grooves even and smooth complete all as specified and as directed.

M&L in repairs 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed Note:The stone size and colour will be provided as per already existing on walls and also finished the joints / grooves even and smooth

S&F in repairs Anodized aluminum frame/shutter/grill for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed.

S&F in repairs door closer hydraulically regulated designation No., 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 81 kg and fixed complete all as specified & directed.

S&F in repair 5.50 mm thick tinted sheet glass with necessary jointing cleats, glazing clips, rubber packing & anodized aluminum snap beading complete all as specified and directed. .

S&F in repairs 100 mm long Mortice latch with four levers (vertical type) , aluminum body and fixed complete all as specified & directed.

M&L for 12mm thick veneered particle board exterior grade faced with decorative veneer on both faces including fixing with rubber gasket in repair complete all as specified and directed

Asha Construction

C P Singh and Co

M/S MAKHIJA TRADERS

R.S BUILDERS

JWALA ELECTRIC CONTRACTORS