DAY TO DAY REPAIRS AND MAINT OF INTERNAL ELECTRIC SUPPLY IN VARIOUS BLDGS MAINT OF ELECTRIC WATER GEYSERS CEILLING FANS FTL LED TUBE LIGHT FITTINGS CFL LED MCB MCB DB EXHAUST FANS SWITCH BOARD SWITCHES SOCKETS MH FITTINGS ETC AT TRV NDB LAND AND TECH

Amount

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete including fixtures and fittings such as switches, ceiling roses, holders, regulators, sockets, tube light fittings and making good disturbed surfaces of walls, floors etc to match with existing surfaces of colour shade complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, unsheathed, multistranded, flexible,copper conductor cable 1.5 sqmm,1100 volts grade drawn through and including PVC casing and caping of size 25 mm or above as required at site with all accessories such as Tee,corner, overlaping connector etc.on surface walls, roofs and ceilings etc. including concealed MS box factory made of suitable size fabricated out of 1.6mm thick MS sheet/modular plate and frame suitable for fixing and including bakelite hylam sheet 3 mm thick fixed flush with wall surface by means of stainless steel cadmium plated screws and cup washers suitable for mounting switches, sockets, fan regulators etc.and including 1.5 Sqmm PVC insulated, multistranded, unsheathed(Green colour),FRLS type single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for One light point/ Fan Point controlled by one switch.

All as per item No 2 above, but for One 3 pin 6 amps socket out let point controlled by one 6 amps switch on independent board .

All as per item No 2 above, but for One 3 pin 6 amps socket point controlled by one 6 amps switch on same board .

All as per item No.2 above, but with 2.5 sqmm for One 3 pin 16 amps socket outlet point controlled by one 16 amps switch on independent board

All as per item No.2 above, but with 2.5 sqmm for One 3 pin 16 amps socket outlet point controlled by one 16 amps switch on same board. Make for item No 2 to 6 :- (i) Copper cable :- Plaza/ Finolex/ Havells/ Polycab ISI Marked (ii) PVC casing & caping :- Press fit/ Precision/ Supreme

Supply & fix switch piano, flush type,single pole, 1 way, 6 Amps complete all as specified and directed.

Supply & fix bell push,flush type, 6 Amps complete all as specified and directed.

Supply and fix switch socket combination, flush type, 2 in 1,5pin, 6 Amps complete all as specified and directed.

Supply and fix switch socket combination, flush type, 2 in 1,6pin, 6/16Amps complete all as specified and directed.

Supply & fix stepped type fan regulator electronic, 100 Watts, 240 volts complete all as specified and directed. Make for item No 7 to 11:- Anchor/Leader/Havells ISI Marked

Supply & fix modular switch 6 Amps, one way, one module complete all as specified and directed.

Supply &fix modular switch 6 Amps, two way, one module complete all as specified and directed.

Supply & fix modular bell push 6 Amps,one module complete all as specified and directed.

Supply & fix modular switch 16 Amps,one way, one module complete all as specified and directed.

Supply & fix modular socket 6 Amps, 2/3 Pin combined, two module complete all as specified and directed.

Supply & fix modular socket 6 A/16 Amps, 6 Pin combined, two module complete all as specified and directed.

Supply & fix modular fan regulator stepped type 100 watts, two module complete all as specified and directed. Make for item No 12 to 18 :- Anchor Roma/ Legrand/ Havells crabtree ISI Marked

Supply and fix call bell AC, 230 volts single pole, ding-dong sound type complete all as specified and directed.

Supply & fix ceiling rose, 3 terminal, PVC/polycarbonate body complete all as specified and directed. Make for item No 19 to 20 :- Anchor/Leader/Havells

Supply and Fixing Modular PVC rectangular block for mounting, switches, sockets,fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep

Supply and Fixing Modular PVC rectangular block for mounting, switches, sockets,fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 150 mm and 50 mm deep

Supply and Fixing Modular PVC rectangular block for mounting, switches, sockets,fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep

Supply and Fixing Modular PVC rectangular block for mounting, switches, sockets,fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 350 mm x 300 mm and 50 mm deep

Supply and fixing modular white cover plate with frame 3 module

Supply and fixing modular white cover plate with frame 4 module

Supply and fixing modular white cover plate with frame 6 module

Supply and fixing modular white cover plate with frame 8 module. Make for item No 21 to 28 :- Anchor Roma/ Legrand/ Havells crabtree ISI Marked

Supply & fix in repair LED tube light fitting 1X 20 Watt white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed. Make:- Crompton Cat No- LDL-20-CDL or equivalent in Bajaj/Halonix/ Phillips

Supply & fix in repair LED tube light fitting 1X 10 Watt white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed. Make:- Crompton Cat No- LDL-10-CDL or equivalent in Bajaj/Halonix/ Phillips

Supply & fix in repair recess mounting high lumenLED slim panel 2'X2' 36Watt, white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed. Make:- Crompton Cat No- CCR-127-36-57-SL-NWH or equivalent in Bajaj/Halonix/ Phillips

Supply & fix in repair recess mounting glare free LED panel 2'X2' 30Watt, white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed. Make:- Crompton Cat No- LCTLRNE-30-FO-CDL or equivalent in Bajaj/Halonix/ Phillips

Supply and fix in repair recess mounting light fittings and supply and fix new LED 12 watt recess mounting light fitting LED backlit round down lighter with high effcient LEDs & glare free opal diffuser IP20, internally prewired, 230V, complete with all accessories such as electronic driver, connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item with all connected accessories complete all as specified and directed. Make :- Crompton Cat No- LSCRM-12W-CDL or equivalent in Bajaj/Halonix/ Phillips

Supply and fix in repairs electronic ballast 1x36 watts, 240 volts, 50Hz suitable for tube light fitting of any type as per site requirement of all as specified and directed Make :- Bajaj/Crompton/Havells

Supply and fix in repairs starter 240 volts, 50Hz suitable for tube light fitting of any type as per site requirement of all as specified and directed Make :- Bajaj/Crompton/Havells

Supply and fix in repairs MCB distribution board TPN 4 way , double door 415 volts duly painted with epoxy based powder coated painting suitable for mounting MCB TP/FP as incomer of rating upto 63Amps, FP and MCB SP /TP as outgoings complete with 200 amps rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate with IP 42 protection including removing old unserviceable item all as specified and as directed.

Supply and fix in repair, factory made, sheet metal enclosure, double door, 415 volts, AC,TPN, vertical distribution board, 4 way, painted with epoxy based powder coated suitable for mounting MCCB as incomer of rating upto 160Amps, FP, 16-36 KA and MCB SP /TP as outgoings and complete with and including 200 amps rated copper busbar, neutral bar,earth bar, connecting cable links with and including top and bottom removable gland plate, complete with IP 43 protection, all as specified and as directed.

Supply and fix in repairs MCB distribution board SPN 8 way 240 volts, double door with IP 42 protection duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 Amps rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate including removing old unserviceable item complete all as specified and as directed. Make for item No 36 to 38 :- Standard/ Legrand/Schneider/Havells/Siemens

Supply and fix in repair MCB SP 6 to 32 Amps,10 KA, "C" series, 240 volts complete all as specified and directed.

Supply & fix in repair MCB SPN 40 Amps 10 KA, "C" series, 240 volts complete all as specified and directed.

Supply & fix in repair MCB TPN 63 Amps,10 KA, 'C' series 415 volts complete all as specified and as directed.

Supply & fix in repair MCB DP 40 Amps,10 KA, 240 volts complete all as specified and as directed.

Supply & fix in repair MCCB FP 63 Amps,10 KA, 240 volts complete all as specified and as directed. Make for item No 39 to 43 :- Standard/L&T/ Legrand/Schneider/Havells/Siemens ISI Marked

Material and labour for sub main wiring complete with 2 run of 6 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 6 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable item complete all as specified and directed. Note : - 02 run of 6 sqmm single core copper conductor cable and 01 run of 6 sqmm single core copper conductor and 01 run of PVC casing and caping shall be measured as one unit.

Material and labour for sub main wiring complete with 2 run of 4 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 4 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable itemcomplete all as specified and directed. Note : - 02 run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable and 01 run of PVC casing and caping shall be measured as one unit. Make for item No 44 & 45 :- (i) copper cable:- Havells/Finolex/Plaza /Polycab ISI Marked (ii) PVC casing/caping:- Press fit/classic/precision/supreme

Taking down storage type electric water heater (Geyser) 25 Ltrs capacity of any make/model/type from existing wall after disconnecting of electric connection and water pipe connections for carrying out repairs and replacement of unserviceable spare parts/ components such as heating element, thermostat, pilot lamp, insulating glass wool, thermal cut out, pressure release valve, safety valve, aperature plate assembly etc and making water tightness of inner storage tank and renewal of rubber washer/ gasket and nut, bolts and washers etc and assembling all parts/ accessories and adjust to required range of thermostat control including fixing back in same location and making water pipe connections and cable connections and testing for its satisfatory functioning complete all as specified and directed. Note:- (i) Spares/ components will be measured and paid separately under relevant item of schedule as supply only (ii) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate.

All as per item No.46 above, but 50 litres capacity

Supply only heating element of 2.0 KW suitable for storage type water heater (geyser) Make for item No's 46 to 48 :- Hotmax/Bajaj/Crompton

Supply only thermostat adjustable type suitable for storage type/ instant type water heater (geyser) suitable for existing type and any capacity complete all as specified and directed.

Supply only thermal cut out storage type/ instant type water heater (geysers) suitable for existing type and any capacitycomplete all as specified and directed.

Supply only pressure release valve suitable for storage type/instant type water heater (geysers) of any capacity complete all as specified and directed.

Supply only geyser indicator pilot lamp(red and green colour) prewired in round/square/rectangle shape suitable for geysers of any type complete all as specified and directed.

Supply and fix PVC connection pipe 15 mm dia, 450mm long with end nuts and washer suitable for hot water outlet of geyser inlcuding removing old unserviceable item complete all as specified and directed.

Supply and fix PVC connection pipe 15 mm dia, 600 mm long with end nuts and washer suitable for hot water outlet of geyser inlcuding removing old unserviceable item complete all as specified and directed.

Supply and fix PVC connection pipe 15 mm dia, 450mm long with end nuts and washer suitable for cold water inlet of geyser inlcuding removing old unserviceable item complete all as specified and directed.

Supply and fix PVC connection pipe 15 mm dia, 600 mm long with end nuts and washer suitable for cold water inlet of geyser inlcuding removing old unserviceable item complete all as specified and directed.

Supply and fix copper conductor cable 3 core; 2.5 sqmm, PVC insulated, sheathed, flexible, multistranded, 1100 volts grade inlcuding removing old unserviceable item complete all as specified and directed. Make:- Havells/Finolex/Plaza/Polycab ISI Marked

Supply and fix sheet metal enclosure with two pin and earth plug and socket including MCB SP 32 Amp,10KA,'C' series inlcuding removing old unserviceable item complete all as specified and directed. . Make:- Make :- Standard/L&T/ Legrand/Schneider/Havells/Siemens ISI Marked

Material and labour for painting to storage type water heater(Geyser) of capacity 25 litre of any make/type to complete external body with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation of surfaces including marking MES Number with black paint complete all as specified and directed directed. Make of paint:- Asian/Berger/Nerolac Note:- Painting work to be carried out after dismantling of storage type water heater(geyser)

All as per item No 59 above, but of capacity 50 litre

Taking down ceiling fan 1200 mm sweep to 1400 mm sweep of any make from its existing position after disconnecting of electric connection for carrying out repairs including servicing, overhauling, greasing etc after cleaning the body internally and externally with cleaning agent including renewal of minor spare parts such as split pins, cater pins, coupling bolt, capacitor holder, terminal adoptor, screws, nuts and washers etc and replacement of spare parts/accessories such as ball bearings, gun metal bushes, capacitor, canopy top and bottom, shackle clip assembly, rewinding of fan motor, painting and including hanging/ fixing back in existing location and making cable connections and testing for its satisfactory performance complete all as specified and directed.

Taking down exhaust fans 250 mm sweep to 300 mm sweep of any make from any height after disconnecting of electric connection for carrying out repairs including servicing, overhauling, greasing etc after cleaning the body internally and externally with cleaning agent and renewal of minor spare parts such as split pins,cater pins, capacitor holder, terminal adoptor, nuts, bolts and washers etc and replacement of components/accessories such as ball bearings, gun metal bushes, capacitor, rewinding of fan motor including fixing back in existing location and making cable connections and testing for its satisfactory performance complete all as specified and directed.

All as per item No.62 above, but 380mm sweep to 450 mm sweep

Taking down wall mounted fan 400 mm sweep of any make from its existing position after disconnecting of electric connection for carrying out repairs to oscillation and speed regulation mechanism including servicing, overhauling, greasing etc after cleaning the body internally and externally with cleaning agent and renewal of minor spare parts such as split pins, capacitor holder, nuts, bolts and washers etc and replacement of components/accessories such as ball bearings, gun metal bushes, capacitor, rewinding of fan motor including fixing back in existing location and making cable connections and testing for its satisfactory performance complete all as specified and directed. Note :- (i) Spare parts will be measured and paid separately under relevant item of schedule as Supply only. (ii) Rewinding, painting will be measured and paid separetly under relevant item of schedule. (iii) Labour element for fixing of supply only spare parts and removing old unserviceable items are deemed to be included in quoted rate.

Supply only capacitor 2.5 mfd, 240 volts, 50Hz complete all as specified and directed. Make :- Epcos / Havells or equivalent

Supply only capacitor 3.15 mfd, 240 volts, 50Hz complete all as specified and directed. Make :- Epcos / Havells or equivalent

Supply only ball bearing Make:- SKF Cat No 6201/ 6202 or equivalent in NBC/NRB

Supply only ball bearing Make:- SKF Cat No 6203/6204 or equivalent in NBC/NRB

Supply only gun metal bush suitable for ceiling fan/ Exhaust fan/ Air circulator/ wall mounted fan of any sweep complete all as specified and directed.

Supply only shackle clip assembly with rubber bush reel and nuts, bolts and washers suitable for ceiling fan of any sweep complete all as specified and directed.

Supply only PVC canopy top and bottom with tighten screw suitable for ceiling fan of any sweepcomplete all as specified and directed.

Supply and fix galvanised louvre shutter suitable for exhaust fan 380 mm sweep and fixing arrangement at out side of wall surface at any height complete all as specified and directed.

Supply and fix galvanised louvre shutter suitable for exhaust fan 450 mm sweep and fixing arrangement at out side of wall surface at any height complete all as specified and directed.

Supply and fix down rod made of MS pipe medium grade 15mm dia of 450 mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to of down rod with two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Supply and fix down rod made of MS pipe medium grade 15 mm dia of 600 mm long duly drilled holes both ends and slot with hole in other end suitable for fixing of ceiling fan of any sweep and painting to down rod with two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Supply and fix copper conductor cable 3 core; 1.5 sqmm, PVC insulated, sheathed, flexible, multistranded,1100 volts grade for making connection to ceiling fan from ceiling rose complete all as specified and directed Make:- Havells/Finolex/Plaza/polycab ISI Marked

Material and labour for painting to ceiling fan of any sweep complete body, blades and down rod with two coat of synthetic enamel paint similar to match with existing colour after preparation of surfaces by using electric spray machine including marking of MES Number with black paint complete all as specified and directed directed. Make of paint:- Asian/Berger/Nerolac

Material and labour for painting to exhaust fan complete body, blade assembly, frame of 380 mm sweep to 450 mm sweep with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation of surfaces including marking of MES Number with black paint complete all as specified and directed directed. Make of paint:- Asian/Berger/Nerolac

Material and labour for rewinding of ceiling fan motor of 1200 mm sweep to 1400 mm sweep with new supper enamelled copper winding wire of existing gauge and number of turns and applying insulated varnish and assembling including removing burnt out copper winding wire complete all as specified and directed.

Material and labour for rewinding of exhaust fan motor of 250mm sweep to 300 mm sweep with new supper enamelled copper winding wire of existing gauge and number of turns and and applying insulated varnish assembling including removing burnt out copper winding wire complete all as specified and directed.

Material and labour for rewinding of exhaust fan motor of 380mm sweep with new supper enamelled copper winding wire of existing gauge and number of turns and and applying insulated varnish assembling including removing burnt out copper winding wire complete all as specified and directed.

Material and labour for rewinding of exhaust fan motor of 450 mm sweep with new supper enamelled copper winding wire of existing gauge and number of turns and and applying insulated varnish assembling including removing burnt out copper winding wire complete all as specified and directed.

Material and labour for rewinding of wall mounted fan of 400 mm sweep with new supper enamelled copper winding wire of existing gauge and number of turns and and applying insulated varnish assembling including removing burnt out copper winding wire complete all as specified and directed.

Radha Engineering Services