REPAIR/MAINTENANCE OF DOOR/WINDOW ETC FOR MD / OTM ACCN OF DAD AT NEW CANTT PRAYAGRAJ

Amount

Taking down shutters of any description exc. 1.0 sqm but not exc. 2.0 Sqm each leaf complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed.

Refixing shutters in the same opening of any description exc. 1.0 sqm but not exc. 2.0 Sqm each leaf including easing and adjusting including refixing the builders hardware complete all as specified and directed.

S&F for MS Steel single/double rebated door frame of size 105 x 60 /125 x 60 mm of approved shape and size incl necessary fixing lugs, hinges, lock strike plate, rat tail rod etc complete all as specified and directed. Note: rat tail rod shall be paid separatly.

S&F for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for mild steel framed work such as grills, grates etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, framed and hung as gates including pintle hinges, stops, hand made sliding bolts, expanded metal (work to be executed any height) etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or Iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red Oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 X 100 mm single rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 X 125 mm double rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges shall be paid separately)

S&F for 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc., manufacturer's specification & drawings complete all as specified and directed. (Note: stainless steel butt hinges shall be paid separately)

S&F in repair Brass Mortice Lock, 4-6 Lever fixed to aluminium doors complete all as specified and directed.

S&F in repairs aluminium (Die cast) body Door closer hydraulically regulated, designation No. 2,universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed.

S&F for 125 mm long, 12 mm dia SS Dash fasteners for door frames etc incl necessary drilling etc complete all as specified and directed.

S&F for 250mm long SS, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.

S&F for 100 mm size SS butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F for 150mm size SS handle, fabricated type, fixed with screws complete all as specified and directed.

S&F for 200mm size SS tower bolt, fabricated type, fixed with screws complete all as specified and directed.

S&F for SS door stopper double 75mm long having rubber bush 25mm dia fixed to door shutter with steel screw complete all as specified and directed.

S&F in repairs 250mm long SS, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.

S&F in repairs 100 mm size SS butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repairs 150mm size SS handle, fabricated type, fixed with screws complete all as specified and directed.

S&F in repairs 200mm size SS tower bolt, fabricated type, fixed with screws complete all as specified and directed.

S&F for powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc complete all as specified and directed.

Supply & fixing in repairs of Aluminum powder coated grill of size 75x75x4 mm thick for windows, incl joining cleat, aluminium strip beading, necessary screws complete all as specified and directed.

S&F for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

M&L in repairs for 4.80mm thick tinted sheet glass and glazing with EPDM rubber beads fixed to aluminium doors/windows in square, area exc 0.50 Sqm in each pane complete all as specified and directed.

S&F for 12mm thick Milky white frosted toughened glass acid wash/sand blasted glass for doors, fixed glazing, railing, partitions etc with necessary holes for providing SS fittings and including locks, two nos 600 mm long SS handles, bottom and top patch & pivots, SS round door stoppers, hydraulically double action floor springs, channel rails etc quality as approved, fixed with jointing material PVC flap at bottom to make fly proof etc complete all as specified and directed.

Providing and fixing factory made UPVC white colour Sliding Window Three Track made of extruded profiles with wall thickness of 2.3mm (± 0.2mm) Window profile with hollow section with multi chamber, Frame (108mm* 45mm), sliding Sash (39mm *58mm). Sliding mesh sash (39mm* 58mm) Sliding Interlock (One vertical length in each shutters) (45mm* 35mm). Glazing bead (20mm* 18mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 ± 0.2mm thick galvanized steel frame (32mm *13mm), 2 Nos, Sliding Sash (29mm*19mm), Profile to be inserted in required profile, frame will be fixed to the wall with 8mm*100mm long fasteners incl Hardware: Touch Lock of zinc alloyed (White powder coated), steel roller system, glazing and other connected accessories complete all as specified and directed. Note:1. Glazed shutters of float glass thickness not less than 5.00 mm and wire mesh shutter with Stainless steel wire mesh 0.36 mm dia with aparture 1.4 mm shall also be deemed included in quoted rates and No extra payment will be made separately. 2. for UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 3. Provn for fixing of one window AC/cooler of standard size to be done using suitable uPVC section in one window of each rooms (bottom portion of window top hung glazed shutter and top portion of window sliding type) as directed.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as specified and directed. Note:1. plain/figured glass thickness not less than 4.00 mm shall also be deemed included in quoted rates and No extra payment will be made separately. 2. for UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F for factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete with glazing bar, dovetailed or welded complete all as specified and directed.

S&F for factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete without glazing bar, dovetailed or welded complete all as specified and directed.

S&F for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified & directed.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.

S&F in repair for S S Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F in repair figured glass 4mm thick pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane incl Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, aluminium frame, concrete or brick surrounds, glazed with puty or fixed with beads complete all as specified and directed.

S&F in repair Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane incl Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, aluminium frame, concrete or brick surrounds, glazed with puty or fixed with beads complete all as specified and directed.

S&F in repair Stainless steel tubing of 25 mm dia for curtain rod fancy type with brackets including end cap (wall to wall or flush to wall) for securing to curtain rod complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specd and directed.

Supply and fixing /fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick coloured PVC board laminated sheet complete. Make : Rajshree or equivalent all as specified and approved by Accepting Officer.

Supply and fixing /fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick plain PVC sheet complete. Make : Rajshree or equivalent all as specified and approved by Accepting Officer.

S&F for magnetic catches with steel body 'H' type fixed to shutter complete all as specified and directed.

S&F for continues (piano) hinges, mild steel, bright finish width of flap (when open) 30mm complete all as specified and directed.

S&F for brass Locks for cupboard, grade I, size 50 mm, 2 levers with necessary accessories complete all as specifed and directed.

S&F stainless steel accessories suitable for kitchen cabinets as under :- (a) Stainless steel basket (Plain) of size 50cmx37cmx10cm/16cm or Stainless steel thali basket (11-13 division) of size 50cmx37cmx20cm or Stainless steel plate/ partition basket (11-13 division) of size 50cmx37cmx16cm or Stainless steel bottom full out of size 50cmx40cmx16cm in two tier, all made of 4mm thk SS wire or Stainless steel cutlery basket of size 50cmx37cmx10cm made of 4mm thk SS wire and bottom of SS perforated sheet and fixing with two nos Telescopic basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make complete all as specified and directed.

M&L for Forming jambs etc. to openings in CM 1:6 , including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.

M&L Making good under cills or over arches, lintels and bressummers including all pinning when necessary (in CM 1:6) complete all as specified and directed.

M&L for two coats of oil bound distemper over chalk whiting on newly plastered surface of wall and cornices including preparation of surfaces complete all as specified and directed.

M&L for 1 mm thick wall care putty on external and internal wall over newly plastered/old decorated surfaces complete all as specified and directed.

Schedule of Credit (MINUS) Rs. 69,406.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. _____] This amount shall be automatically deducted to arrive at tendered sum

M/S SS Tarders (BID ID -3493286)