SPECIAL REPAIRS TO ROAD, SECURITY WALL AND GATE IN 27 AND 28 KAR BN NCC IN HUBLI UNDER GE BELGAUM.

Amount

Excavating over areas, n exc1.5 metre deep and getting out in Hard/dense soil complete all as specified and as directed.

Removing excavated soil n exc 50 metre and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and as directed.

Material and labour for Sand filling under floor or in foundation including watering and consolidation with 8 to12 tonne Power roller complete all as specified and as directed.

Material and labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering with 8 to12 tonne Power roller complete all as specified and as directed.

Rolling and consolidating formation surfaces in cutting with 8 to12 tonne Power roller complete all as specified and as directed.

Material and labour for 150 mm thick Soling with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to12 tonne Power roller complete all as specified and as directed.

Finishing surface of Concrete pavement by belting complete all as specified and as directed.

Finishing surface of Concrete pavement by brooming complete all as specified and as directed.

Material and labour for Use of Steel Formwork to sides of concrete surface not exceeding 200 mm thick flat finished fair and even complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D2, (Using 40 mm graded stone aggregate ) 100 mm thick as in sub base including necessary steel form work complete all as specified and as directed.

Material and labour for 150mm thick Cement concrete work in pavement of flexural strength 45kg per sqcm in field using min 400kg of cement/cum mixed with non circular synthetic fibre at the rate of 0.25% by weight of cement complete all as specified and as directed.Note :Synthetic fibre shall be measured and paid in item No. 12 mentioned below

Supply only Non-circular synthetic fibre at the rate of 0.25% by weight of cement, complete all as specified and as directed. Note : Polyester fibre used as secondary reinforcement in all types of concrete and mortars Make of Fibre: M/s Reliance Industries Limited,New Delhi or equivalant approved by GE

Material and labour for Polythene film ,black 400 micron laid under cement concrete pavement complete all as specified and as directed.Make:Mecca Ferri or equivalent approved by GE

Material and labour for Forming 12mm thick Expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ in between slab of thickness 150mm complete all as specified and as directed.

Demolition of concrete of any description and in any position in old hardstanding and removal of debris off the premises complete all as specified and as directed. .

Material and labour for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping with extra sand complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick above or below ground level including removal of debris off the premises complete all as specified and as directed.

Surface excavation of depth not exc 30 cm deep and averaging 15 cm deep and getting out in Hard/ dense soil complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation and getting out in Hard/dense soil complete all as specified and as directed.

Material and labour for Plain cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) as in foundation mass concrete complete all as specified and as directed.

Material and labour for Hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surface complete all as specified and as directed.

Material and labour for 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base flooring including necessary steel form work complete all as specified and as directed.

Material and labour for Providing PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection 75 mm thick finished even and smooth without using extra cement including necessary steel form work complete all as specified and as directed.

Material and labour for Coloured chequered cement concrete tile of size 30cmx30cmx25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floor over and including cement screed bed or bedding layer of mortar in CM 1:6 , 20 mm thick complete all as specified and as directed .

Dismantling wrought iron or mild steel work in angle post of any description and taken as credit compete all as specified and as directed.

Dismantling fencing wire mesh,any type, and taken as credit compete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) and scrap iron taken as creditcomplete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, and removing rubbish off the premises compete all as specified and as directed.

Material and labour forUse of Steel Formwork to sides of concrete foundations, footings, and plinth beams with rough finished surface of concrete complete all as specified and as directed.

Material and labour for Reinforced cement concrete 1:2:4 Type B1 using 20 mm graded stone aggregate (nominal mix) as in foundation , including footings, plinth beam, complete all as specified and as directed

Material and labour for Use of steel Formwork to sides of pillar, post, struts, piers, column etc and stanchions in surfaces of concrete complete all as specified and as directed.

Material and labour for Reinforced cement concrete 1:2:4 Type B1 using 20 mm graded stone aggregate (nominal mix) as in Column, pillar, pier, post and struts etc complete all as specified and as directed.

Returning, filling in excavated soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Material and labour for Precast cement concrete block masonry with solid blocks type C1 1:3:6 ( using 20mm graded stone aggregate), exc 10 cm in width in set in cement mortar CM 1:6 complete all as specified and as directed.

Material and labour for Use of steel Formwork to RCC band with rough finished surface of concrete complete all as specified and as directed.

Material and labour for Reinforced cement concrete 1:2:4 Type B1 using 20 mm graded stone aggregate (nominal mix) as in bands,beams, cantilevers, bressummers,lintels over 1.5m span etc complete all as specified and as directed.

Supply and fix Mild steel TMT bar 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Supply and fix Mild steel TMT bar 6 to 8mm dia and over, cut to length bent to shape reqd incl cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Description all as item no:38 here in before but 5 to 10 mm dia as in stirrups / spacer etc complete all as specified and as directed..

Material and labour for Rendering 15mm thick in CM 1:4 on fair faces of PCC block masonry or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of chalk whitening primer complete all as specified and as directed

Material and labour for Preparation of old plastered surfaces of wall and applying two coats of cement based paint complete all as specified and as directed

Surface dressing n.exc 15 cm deep in hard /dense soil complete all as specified and as directed.

Material and labour for 110 mm bore PVC (SWR) pipe , single socketed in any length with rubber ring joints for weep hole complete all as specified and as directed. Make: Finolex, Supreme,Price

Supply and fix Mild steel angle iron Non swan neck post of size 50x50x6mm thick in fencing including cutting tops to shape as directed ,drilling holes notching for wire including necessary drilling, bolting or riveting, etc.and similar work conforming to Fe-290 Gde E-165complete all as specified and as directed.

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for PCC 1:2:4, Type B1 (using 20 mm graded stone aggregate) as in bed block including necessary steel form work complete all as specified and as directed.

Supply and fix Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and as directed.Note :Each line of wire to be measured .

Material and labour for Plain cement concrete 1:3:6 type C1, (Using 20 mm graded stone aggregate ) as in coping etc including necessary steel form work complete all as specified and as directed.

Material and labour for Granite work (table rubbed and polished) in pillars in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including backing coat of 10 mm thick in cement mortar 1:4 complete all as specified and as directed.

Supply and fix Mild steel framed work such as framed and hung as gates, ornamental and intricate design including pintle hinges, stops, hand-made sliding bolts, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doorscomplete all as specified and as directed.

Supply, lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 16 Sqmm, 4.0 core laid in trenches or fixed to wall / passing through pipe / pole compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately under relevent items in this BOQ (ii) Make of XLPE Cable : Gloster/Polycab/KEI

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth in any type of soil up to top of drain pipe,laying of cable etc complete all as specified and as directed.

Material and labour for Double wall corrugated HDPE pipes of ISI marked 63 mm outer dia and 50 mm inner dia as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc complete. all as specified and directed.Note :Make : Rex/ Ketron/Duraline

Supply and fix Galvanised iron water tube 'light grade' of size 50 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:Make of GI Pipe :TATA/JINDAL/ZENITH (ISI MARKED)

Material and labour for Single swan neck Type Steel tubular swaged poles Type 410 SP-31 (9.0 metres long) swan neck type complete with CI base plate , finial taper plug ,bolts and nuts and screws including necessary earth work and excavation , PCC foundation and coping as per manufacturers instructions complete all as specified and as directed.

Supply and fix in repair LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Note : Make :Havells Cat part no : OR equivalent in Bajaj/CG/Philips

Supply and fix Factory made (CPRI approved) Weather proof, dust and vermin proof street light junction box of size 200 (L) x 200 (B) x 100 (D) mm (minimum dimensions) made up of 3.15 mm thick CRCA sheet, powder coated after preparation of surfaces comprising of 04 Nos aluminium bus-bar of size 20 x 4 mm mounted on suitable size spacer insulators with provisionn of 01 No of MCB SP 6 Amps, 10 KA breaking capacity, "C" curve and two openings at the bottom and one opening at the top with cable glands fixing with the help of suitable sized MS clamps to steel poles including testing complete all as specified and as directed.Note: Make of MCB : Indo Asian/L&T /SIEMENS

Supply and fix Post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as spcified and as directed.

Material and labour for Earthing complete with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground in vertical position, earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below ground level connetced with galvanised iron earth lead wire of size 4 mm dia(Upto 7.50 metre length) by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary excavation & earth work, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 3 of MES Schedule Part-I complete to obtain less than 1 Ohm earth resistance, fiaxed in repairs complete all as specified and as directed.

Sadhana Constructions & suppliers

SMLP ASPHALTS