SPL REPAIRS TO TOILETS DRAINAGE SYST AND SPL REPAIR REPLACE OF EPOXY FLOORING OF OT PROVN OF CONNEC PASSAGE IN RIGHT WING TO LEFT WING AT AFH PROVN OF IRON GRILL FOR WINDOW OF CATR SEC MESS OFFICE AND GAS BANK WITH FITTGS AT OFFR MESS AT AFS JORHAT

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F Glazed ceramic coloured tiles of size 450x300x6 to 7mm thick as in vertical surfaces such as skirting and dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 as baking layer of tiles, complete all as specified and directed.

M&L Coloured non skid ceramic tiles of size 6 to 7 mm thick (Square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or colured cement to match, over and including 20 mm thick screed bedding layer in cement mortar 1:6 complete all as specified and directed.

Dismantling of damaged RCC works (cover slab of mainhole septic tank, kit slab or similar articles) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Pre cast reinforced cement concrete 1:2:4, type B1(using 20mm graded stone aggregate) as in cover slab of manhole, septic tanks etc. and set in cement mortar 1:4, complete all as specified and directed.

M& L for form work to sides and soffit of kitchen slab complete all as specified and directed.

M&L 8 mm dia deformed or twisted steel bars, cut to length, bent to shape required, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F in repairs 32 mm dia waste coupling with waste pipe of PTMT (half or full threaded) (Minimum weight 45gms), complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floors, footpaths, aprons or in shelves, platform etc. bedded and pointed in any mortar complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (Table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

S&F 75mm bore PVC (SWR) soil, waste and ventilating pipe, single socket in any length with rubber ring joint fixed to wall with MS clamps, including taking down / up unserviceable pipe complete all as specified and directed.

S&F 110mm bore PVC (SWR) soil, waste and ventilating pipe, single socket in any length with rubber ring joint fixed to wall with MS clamps, including taking down/up unserviceable pipe, complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) bends, any radius complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) bends, any radius complete all as specified and directed.

S&F in repairs 75 mm bore branch pipe, single (single Y) equal or unequal fixed to existing pipe complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) Tee, any radius, complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) Tee, any radius, complete all as specified and directed.

S&F in repairs PVC floor trap 75 mm dia with grating, joint with solvent cement including jointing to waste pipe fixed in plain cement concrete (1:3:6), type C1(using 20mm graded stone aggregate) to preventt all type of seepage in wall / floor from first floor to ground floor and making good the disturbed surface as existing, complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110 dia mm, PVC with grating, joint with solvent cement including jointing to waste pipe fixed in plain cement concrete, type C1(using 20mm graded stone aggregate) to arrest all type of seepage in wall / floor from first floor to ground floor and making good the disturbed surfaces as existing, complete all as specified and directed.

S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated with capstan heads handle, screwed for iron pipe, complete all as specified and directed.

S&F in repairs 15mm bore pillar tap, cast copper alloy, chromium plated with capstan heads, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repairs 15mm bore concealed stop cock fancy type, chromium plated with long shank and cup cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and directed.

Ditto all as per item No. 22 above but Angle cock type. complete all as specified and directed.

S&F in repairs 125 mm dia. PVC Grating Doom fixed in floor including making good the disturbed surface in cement mortar (1:3) complete all as specified and directed.

S&F Vitreous China Squatting pan ‘ORISSA’ Pattern, size 580X440mm, White, with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and socket of WC pan (excluding flushing cistern and flush pipe), fixing with and including provision of 150mm thick lime concrete bedding including taking out unserviceable WC pan and connected items complete all as specified and directed. Cat part No :C0117 of make Parryware or equivalent of Kohler, Cera, Hindware as approved by GE

S&F in repairs PVC (SWR) gully trap 125/110 dia mm, PVC with grating, joint with solvent cement including jointing to waste pipe fixed in plain cement concrete (1:3:6), type C1(using 20mm graded stone aggregate) and prevent all type of seepage in wall / floor from first floor to ground floor and making good the disturbed surface as existing complete all as specified and directed.

S & F in repairs PVC Flushing cistern 10 Litre capacity, low level valve less, symphonic action type, white, with inlet, ball valve, float and handle including 32mm dia PVC flush pipe including brackets, cutting and pinning in ends, making good the disturbed surfaces in cement mortar 1:3 after taking down the unserviceable flushing cistern with connected items complete all as specified and directed.

S&F Vitreous china wash hand basin Counter Top of size 450X400mm 'White', with 32mm dia brass chromium plated waste fitting, galvanised iron ‘Light Grade’ 32mm bore waste pipe and making good the disturbed surfaces in cement mortar 1:3 including taking down un-serviceable wash hand basin and connected items complete all as specified and directed. Cat part No. C0438 of Parryware or its equvalent of Kohler, Cera, Hindware as approved by GE

S&F PVC Connection 15mm size with PTMT Nuts of length 450mm and fixed in repairs, complete all as specified and directed.

S&F in repairs chromium plated (CP) toilet paper holder with chromium plated brass screws complete all as specified and directed.

S&F in repairs brass chromium plated (CP) tubular towel rail, 20mm dia, D-type, 600mm long between flanges brass screws complete all as specified and directed.

S&F in repairs chromium plated soap dish, perforated type and fixing with chromium plated brass screws complete all as specified and directed.

S&F in repairs brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and directed.

S&F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed.

S&F 15mm dia galvanised iron steel tubing "Medium Grade" with all fittings and fixtures fixed to walls, ceiling or laid in floor after taking down the old GI tubing of any grade with connection and fittings complete as all specified and directed.

S&F 20mm dia galvanised iron steel tubing "Medium Grade" with all fittings and fixtures fixed to walls, ceiling or laid in floor after taking down the old GI tubing of any grade with connection and fittings complete as all specified and directed.

S&F in repairs brass chromium plated health foucet with 75 cm long CP flexible connection pipe and chromium plated brass nuts at one end complete all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Taking down chowkhats or frame of area not exc. 1.50 sqm each complete all as specified and directed.

Taking down shutter of any description n exc 1 sqm each, complete all as specified and directed.

S&F 2nd class hard wood plain ,solid, straight, chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F Mild steel hold fast made of flat iron conforming to 410-0 or Fe-310-0, complete all as specified and directed.

M&L for Plain cement concrete,1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping, PCC block for fixing of hold fast, sanitary fittings etc including necessary formwork, complete all as specified and directed.

S&F 75 mm long, "medium weight" cold rolled mild steel butt hinges complete all as specified and directed.

S&F 100 mm long aluminium anodised tower bolt of extruded section including screws complete all as specified and directed.

S&F 100mm size extruded aluminium alloy handles fabricated type anodised, complete all as specified and directed.

S&F 3 mm thick pin head type figured glass and glazing with oil putty in square not exc 0.5 sq.m in each pane, complete all as specified and directed.

M & L for two coats of synthetic enamel paint (first grde quality) over a coat of pink primer after preparation of new wooden surface of any description over 10cm width or girth complete all as specified and directed.

S & F Steel windows or ventilators with side hung shutters including projecting type hinges with steel handle, steel peg stay, glazing bars, dovetailed or welded, complete all as shown in TD drawing AF/TD/175/06 Sh No 1/5 to 5/5 specified and directed.

M&L for applying two coats of synthetic enamel paint (ordinary tint) over a coat of red-oxide zinc chrome primer after preparation of new or previously untreated steel surface of any description over 10 cm width or girth, not otherwise described complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc. of any descriptions, complete all as specified and directed.

M&L for half brick work with sub class B bricks exc 6m mean radius on plan built in cement mortar (1:4) complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster of any description on brick wall or concrete surface etc. including racking out joints, hacking for key, scrubbing down with water, complete all as specified and directed.

M&L for 15 mm thick rendering on other than fair faces of brick wall finished fair & even in cemant mortar 1:6 complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick wall mixing with water proofing compound @ 3% by wt of cement finished fair & even complete all as specified and directed. NOTE:- The Rate of water proofing compound shall be deemed to be included in the item rate quoted.

M&L for 10mm thick rendering in cement mortar 1:3 on brick or concrete surface of ceiling finished fair & even complete all as specified and directed.

M&L for Applying three coats of white wash on ceiling after preparation of newly plastered surface of ceiling and complete all as specified and directed.

M&L for Two coats of cement base paint over a coat of approved primer after preparation of newly plastered surface of wall complete all as specified and directed.

M&L for Applying three coats of white wash on wall after preparation of newly plastered surface of wall complete all as specified and directed.

M&L for Applying one coat of white wash to wall after preparation of old plastered or un-plastered surface of wall and cornices by brooming down with steel wire brushing, scraping down smoke spot moulds, mass and efflorcscent salts and treating oil and greasy spot complete all as specified and directed.

M&L for Applying one coat of white wash on ceiling after preparation of old decorated plastered surfaces of ceiling complete all as specified and directed

M&L for Applying one coat of oil emulsion distemper (oil bound washable distemper) after preparation of old distempered surfaces of wall by washing, rubbing down stopping of distempered or painted surfaces complete all as specified and directed.

M&L for one coat of synthetic enamel paint (first grde quality) after preparation of old wooden surface of any description over 10cm width or girth complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) of area not exc. 1.5 Sqm each complete all as specified and directed.

-Ditto- all as per srl. item No. 66 here-in-before but area exc 1.5 sqm and not exc 4 sqm each complete all as specified and directed.

S&F in Opening solid PVC single rebated door frame of size 50mm x 95mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. tube complete all as per specification & drawing shown in SSR PT II as approved all as specified and directed.

S&F in Opening solid PVC single rebated, door frame of size 100mm x 45mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. tube complete all as per specification & drawing shown in SSR PT II as approved all as specified and directed..

M&L for Second class hard wood 30 mm thick glazed and skelton shutters open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded mitred and sash bars of any number of edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part I section 8 clause 8.20 (b) and fitted to wooden chowkhat, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded palin colour PVC 'C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for TOP rail, lock rail and bottom rail on on either side and as gap insert for top rail and bottom rail. Panellining of plain colour PVC sheet to be fitted in the MS frame welded /sealded to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per specification and drawing complete all as specified and directed.

S&F Factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick (style:), with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face as per specification & drawing complete all as specified and directed.

Demolition of plain cement concrete of any description and in any position other than ground floor (as in sunken floor) exc. 15 cm thickness complete all as specified and directed.

S&F Stainless Steel Toilet Grab Bar (Size 600mm long) the easy solution to prevent yourself from tripping over and meeting with accidents in washrooms and bathrooms. Grab bars made up of 304 grade stainless steel that provides strong grip and lasting performance complete all as specified and directed. Make - Jaquar/ Hindware/ Cera as approved by GE

S&F 15mm CP brass A long handle insures convenient elbow action to start the spout with just a light touch. Wall Mounted Single Lever Sink Mixer with Surgical Purpose Elbow Action Comfort Specially Design for doctors and medical staff with Lower Side Swinging Spout, complete all as specified and directed. Cat part No :FLR-CHR-5166 of Jaquar or its equivalent of Prayag, Cera as approved by GE

S&F 15mm CP brass A long handle insures convenient elbow action to start the spout with just a light touch. Pillar Cock High Neck with Surgical Purpose Elbow Action Comfort Specially Design for Doctors and Medical Staff, complete all as specified and directed. Cat part No :FLR-CHR-5031N of Jaquar or its equivalent of Prayag, Cera as approved by GE

S&F 15mm CP brass A long handle insures convenient elbow action to start the spout with just a light touch. Bib Cock High Neck with Surgical Purpose Elbow Action comfort specially design for doctors and medical staff complete all as specified and directed. Cat part No :FLR-CHR-5043N of Jaquar or its equivalent of Prayag, Cera as approved by GE

M&L for waterproofing treatment to RCC sunken slab as specified below. Make: PIDILITE or equivalent make as approved by GE. (a) Clean the sunken protion of toilet /Bath /WC /Kitchen thoroughly to remove laitance, dirt, dust etc. (b) Form angle fillet of size 40mm x 40mm along the junction of wall and floor using polymer modified mortar (Dr Fixit Pidicrete, URP or eqvt) (c) Sanitary pipes entering through walls and floors shall be sealed with "Dr Fixit Bath seal Tape" and the gaps to be grouted with non-shrink cementitous grout " Dr Fixit Bathseal Grout" or eqvt Nahani traps to be fitted securely and the gaps around it to be grouted in the same manner.

(d) Applying one coat of a Bitumen modified polymer coating "Dr Fixit Bathseal Plus" or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first coat is dry. Extend the coating upto 150mm above the FFL. Above FFL, another cementitious waterproof coating "Dr Fixit Pidifin 2 K " or eqvt can be further applied right upto 2.1m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely.

(f) After 2 to 3 days, sunken portion must be overlaid with a 50mm thick concrete screed M 15 type B0 mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet /WC/Bath Kitchen floor, tiling work (floor and dado) water proofing shall be carried out using suitable Tile adhesive and ready -to-make Tile grouts of makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF as approved by GE.

Excavation in trenches not exceeding 1.5 wide and not exceeding 1.5 m deep and getting out as in soft / loose soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed.

Removal of excavated earth (soil) to a distance not exceeding 50 mtr and depositing where directed, complete all as specified and directed.

M&L for Plain cement concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for Plain cement concrete 1:2:4, type B2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Dismantling damaged RCC works (cover slab or similar articles) of any description in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Pre-cast reinforced cement concrete (RCC), 1:2:4, type B1 (using 20mm graded stone aggregate) as in cover slab and similar articles and set in cement mortar 1:6 including use and waste of formwork complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 150mm bore reinforced concrete pipe, class NP2 including necessary fittings as requried laid and jointed with collars complete all as specified and directed.

M&L for Plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe of 150mm dia including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and directed.

M&L for 300mm bore reinforced concrete pipe, class NP2 including necessary fittings as required laid and jointed complete with collars complete all as specified and directed.

M&L for Plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe of 300 mm dia including packing under and haunching against the side of pipes after they are laid and tested, complete all as specified and directed.

M&L for 450mm bore reinforced concrete pipe, class NP2 including necessary fittings as required laid and jointed complete with collars complete all as specified and directed.

M&L for 600mm bore reinforced pipe, class NP2 including necessary fittings as required laid and jointed complete with collars complete all as specified and directed.

M&L for Plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe of 450 mm dia including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and directed.

M&L for Plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe of 600 mm dia including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 100mm thick Plain cement concrete 1:2:4, type B-2 (using 40mm graded stone aggregate) as in road, path hard standing etc. laid in panels in path & pavement by making impression of expanded metal with and including all necessary form work complete all as specified and directed.

M&L for 50mm thick Plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels with and including all necessary form work complete all as specified and directed.

Excavation over areas exceeding 1.5m deep but not exceeding 3.00m deep and getting out as in soft / loose soil complete all as specified and directed.

M&L for Reinforced cement concrete, M-25 (design mix) in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs and mass concrete complete all as specified and directed.

Form work to sides of concrete foundations, footings, base of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams etc for rough finished flat surfaces complete all as specified and directed.

S&F Rolled mild steel roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance pieces, cleat and notching, drilling, fitting, rivetting and / welding or connecting with bolts and nuts ( including rivets , bolts, nuts) and fixing complete conforming to Fe-410-W Gde E-250 quality-A complete all as specified and directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for Moorum / red bajri filling in floors or pavings, laid in layers not exc.15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for 40mm thick Plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in floors and laid in panels, top surface without using extra cement complete all as specified and directed.

M&L for 300mmX300mmX10mm thick high traffic paver tiles (coloured) joint free as in floor jointed with neat cement slurry and pointed in white / coloured cement to match the surface laid over and including 20mm thick screed bed in cement mortar(1:6), complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coated GI based (Trapezoidal shaped) steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screw including making good the broken gable wall, complete all as specified and directed.

M&L for 4mm thick Epoxy floor coating with application services complete all as specified and directed.

M&L for preparation of old plastered or un-plastered surfaces of wall and cornices by brooming down with steel wire brushing, scraping down smoke spot moulds, mass and efflorcscent salts and trating oil and greay spots and applying Epoxy wall coating materials with primer with application services complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep in soft/ loose soil and getting out all as specified and directed.

M&L for Hardcore of Broken stone or boulder of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick in one piece as in treads of staircase or in any position etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over 20 mm thick screed bed or bedding in CM 1.4 for laying floor finishes, complete all as specified and directed

All as item No 111 here in before but in one piece on vertical surface as skirting/ dado or in wall etc over and incl 10 mm thick rendering in CM 1:3 to receive kota stone/ slab etc all as specified and directed

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of conforming to Fe.290. Gde-E-165 all as specified and directed.

S&F Mild steel, plain, black sheet, 1.25mm thick, as in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specified and directed

S&F Mild steel Angle, Flat as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats and notching, drilling, fitting, rivetting and / welding or connecting with bolts and nuts ( including rivets , bolts, nuts) and fixing complete or other connecting plates of Fe-410-W(GdeE-250) all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Provision of LPG Gas Bank connection from cylinder to gas stove through piping from external bank to Kitchen with complete piping, fittings and fixture like Bronze ferrule cock, Automatic Gas safety device leakage detector with Auto cutoff (Make - INDIA OR equivalent as approved by GE), T 3 way barbed connector, Reinforced Rubber Gas pipe min 2 mtr long with clamp, male & female nozzle, all fittings complete etc Note: Installation & checking for leakage/damage proof of gas is included for the Rate Quoted above

Suppy and fixing aluminium grill of standard section type 'A' diagonal (aluminium deco grill DG/01 7x4.5 mm thick fixed with channel of size 38mm x 12mm x 13mm (section 8778) with 'U' rail necessary jointing cleats, screws, fixed with frame etc. complete all as specified and directed.

S&F Vitreous China Wash down water closet Pan (Pedestal Pattern) white including fixing bolts ( excluding Flushing cistern and Flushing pipe) with Plastic water closet seat, black, closed pattern with Recessed bottom and cover including mild steel chromium plated aluminium hanging device and including taking out unserviceable WC and making good disturbed surfaces with cement mortar 1:3, complete all as specified and directed. Cat part No :C0278 of make Parryware or equivalent of Kohler, Cera, Hindware as approved by GE Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

M/S D J ENTERPRISE

M/S ALO ELECTRICAL HOUSE

Bidder Name

M/S D J ENTERPRISE

M/S ALO ELECTRICAL HOUSE

RAJIB AND CO