Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹43,140
Closing Date
16 Jun 2026, 5:00 pm7d left
Director ARAI
S.No.102,Vetal HIll,Off Paud Road,Kothrud,Pune.411038
CIVIL AND ALLIED WORK FOR ESTABLISHMENT OF NEW HRM AND A CYBER SECURITY OFFICE AT GYM AREA, A BUILDING SECOND FLOOR, ARAI- KOTHRUD, PUNE
2026_DHI_840638_1
ID-12-PR-20015835
Limited.
Civil Works - Building
120 days
S.No.102, Vetal HIll, Off Paud Road, Kothrud, Pune.411
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹43,140
Yes
S.No.102,Vetal HIll,Off Paud Road,Kothrud,Pune.411
5 Jun 2026
5 Jun 2026
17 Jun 2026
5 Jun 2026
16 Jun 2026
6 Jun 2026
6 Jun 2026 - 10 Jun 2026
10 Jun 2026
Name of contractor:
WORK- CIVIL AND ALLIED WORK FOR ESTABLISHMENT OF NEW HRM& A OFFICE AT GYM AREA, A BUILDING SECOND FLOOR, ARAI- KOTHRUD, PUNE
Sr. no Desciption Unit Qty Rate Amount SAC code
1 Dismantling and removing of all types of aluminium partition/ Glass Window with frames (fixed window or sliding winsows or comnination) of any height at any floor; MS grills of all Sizes, with its all fixtures and fastenings completely carefully and without breaking from wall or partition and shifting and stacking the same material within the 500 m radial distance from building with all leads and lifts, cleaning etc. complete as directed by the Engineer-In-Charge. Scope includes all tools & tackles, scaffolding required. Sqm 30
2 Dismantling of steel or wooden doors shutter (single/ double door shutter)along with frame (chaukhat), architrave, holdfasts etc. complete at any floor level and stacking the material within 100 metres lead. Care to be taken that frames & shutters can be reused. Sqm 4
3 Removing the Existing carpet on floor properly so as to reuse at any other location. Scope includes cleaning of surface after removal and disposal of unserviceable material outside ARAI premises and stacking of serviceable material with in 100 meters lead as per instructions of Engineer-in-charge. Sq.m 25
4 Demolition of brickwork including demolition of plaster /Tile/ stone surface/Concrete Sill/ RCC Lintel manually/ by mechanical means for creating door opening, modification of room etc. Scope includes necessary scaffolding with stacking of serviceable material at ID yard and unserviceable material outside ARAI premises at contractors risk & cost as per instruction of EIC. Lead up to 100 meters Cum 3.5
5 Demolition of wall, floor tiles (of any thicknes, up to any height) laid in cement mortar with mechanical means and shifting the unservicable material outside ARAI premises at contractors risk & cost. Scope includes necessary tools & tackels, scaffolding material. Sqm 25
6 Demolition of RCC : Demolition of RCC members such as Loft,chajja, beam, column of any thickness at any height (approximate height 2.2 meters from floor) with mechanical means. Scope includes necessary scaffolding work, tools & tackels, consumables. Scope also includes shifting the unservicable material outside ARAI premises at contractors risk & cost. Contractor will have to provide safety PPE`s to workers. Cum 1.5
7 BBM : Fly Ash Brick Masonry Work - at all heights, any width with Non modular sized, Machine made Fly ash Lime Bricks , confirming to I.S. 12894-2002 , of class designation 7.5, ( 75 kgf/sq. cm ), Any size with fly ash confirming to I.S.3812-1981, : a) Cement mortar 1: 6 (1 cement : 6 coarse sand) in super structure as per CPWD Specification, including scaffolding at all levels, with all lead lift and curing etc. complete for all widths masonry. Masonary should be in line , level, plumb with joints raked as per standard Cum 2
8 Single coat Plaster- Providing & applying in single coat sand faced cement plaster 12-15 thick (on internal / external walls), in cement mortar 1:4, ( 1Cement : 4 fine sand) finished, to concrete, fly ash Block / brick surface, on walls in all levels and at all positions, on joints, and corners rounded off, including scaffolding & curing at any height and any location etc. complete. Plaster should be in line , level and plumb with desired finish Sqm 50
9 AAC block masonry- light weight block masonry: AAC light weight block masonry with cement mortar or chemical of width as per drawing in layers recommended by manufacture at all heights, in super structure as per CPWD Specification, including concrete patali, scaffolding at all levels, with all lead lift and curing etc. complete for all widths masonry. Masonary should be in line , level, plumb with joints raked as per standard Sqm 4.5
10 Providing & applying, in single coat Gypsum plaster 12-15 mm thick on plastered- concrete, fly ash Block / brick surface, on walls in all levels and at all positions, on joints, and corners rounded off, including scaffolding at any height and any location etc. complete. Approved make Saint Gobain, Gyproc, India Gypsum or as per EIC. Sqm 50
11 False ceiling work: Providing and fixing Armstrong or equivalent tiled False Ceiling (RH 99) Classic lite approved materials of size 595x595 mm in true horizontal level , suspended on inter locking metal grid of hot dipped galvanized steel sections consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying metal perforated false ceiling tiles of approved texture and thickness in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be powder coated , all complete for all heights as per specifications, drawings etc completed as per direction of Engineer - in- charge.( Rate should be including of all like tools,tackels,consumables & scaffolding etc complete.) Work execution as per CPWD Guideline Sqm 75
12 Providing and fixing Gypsum Board False Ceiling at height up to 3.2 m from FFL including providing and fixing of frame work made of special Galvanized section Gyprock/Armstrong make for supporting frame structure as per IS :277 and consisting of angle cleats of size 25mm wide X 1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to center, one flange fixed to ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate GI channels 45x15x0.9mm running at spacing of 1200 mm center to center, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tepered flanges of 26mm each having lips of 10.5 mm, at 450mm center to center , shall be fixed in a direction perpendicular to GI intermediate channel with connecting clip made out of 2.64 mm dia x 230 mm long GI wire at every junction, including fixing perimeter channels 0.5mm thick 27 mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of PVC rawl plugs at 450mm centre, with 25mm long dry wall screws of size 3.5 X 25mm at 230mm c/c, including jointing and finishing to flush finish to tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound covering upto 150mm on both side of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making opening for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing, specification and direction of the Engineer in Charge but excluding cost of painting. Sq.m 50
13 Gypsum patta -As per Above item 1 specification vertical patta up to 300mm in Gypsum Board as per detailed drawing Mtr 30
14 SIngle Component Acrylic based waterproofing : Cleaning / Grinding to remove all loose and foreign matter and to achieve a rough profile suitable for proper adhesion of single component acrylic based waterproofing system. Opening of cracks above 1mm wide. Cleaning the cracks, applying single component acrylic based white primer of approved make. Filling the opened cracks with single component flexible acrylic sealant. After completing the surface preparation , crack filling , applying low viscosity, white color , acrylic based single component primer. Observe for absorption of the primer. Apply more primer in case found absorbed in some places. Allow the white primer to dry for at least 3 hours. Applying first coat of single component UV stable, thixotropic, having elongation of 200%, solid content more than 70%, in light grey shade at the consumption of 600 gms/sqm. Laying the non woven polyester fabric of 60 gsm on the wet applied single component acrylic coating as described above. Dry rolling the non woven polyester fabric to remove the entrapped air and wrinkles if any. Applying one more coat of single component acrylic coating at the consumption go 500 gms/sqm. Finally applying the final coat of single component acrylic coating at the consumption of 400 gms/sqm. Allowing the so called liquid applied reinforced waterproofing membrane to cure for 48 hours. The rate shall also include labour, tools & tackeles sand consumables etc complete. Treatment over top terrace, gutter, chajja, verticle surface beam bottom wall joints. etc any surface. Scope include shifting of rabbit material to ground level as per instruction. Scope also includes necessary scaffolding, Spider etc along with Safety PPE`s. Note: Warranty shall be of 5 years on bond paper Sqm 10
15 Vitrified flooring (Tile on tile) : Providing and laying Vitrified Floor tiles, for flooring and skirting, in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on existing mosaic tile flooring by using cementitious grout with 5 mm PVC spacer including filling joints with matching colour pigments epoxy grout etc., complete. Size of Tile 600 mm X 600 mm. Basic Rate of Tile 65/- Sqft Sq.m 100
16 Black granite Door / window sill: Providing and laying Black Granite (premium black/ zed black) for Sill, door floor band in different sizes (16-18mm thk) of approval colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments, including champer/edge polishing to both side etc., complete. Mtr 10
17 P/F Aluminium window ( combination of Fixed window & 3 track sliding window) Providing and fixing in position Fixed Glazed windows at all heights, including 5.5mm Non Tinted NoN toughened glass ( Saint Gobain or equivalent ) fixed in Aluminium frame using appropriate Z or T section etc. complete ,Providing and fixing in position powder coated aluminium section Three Track Sliding window mounted on rectangular frame as per drawing details ( 16 gauge 1" heavy Jindal section series ) and handle selected quality 5.5mm thick Plain glass ( Saint Gobain ) to be fixed in shutter with neoprene gasket with approved quality PVC rollers necessary locks, handles, pvc lining, filling joints by sealants and wooden encasement if required wherever necessary etc. Complete as directed by Engineer In charge, Powder Coated with colour approved by ARAI. Dimenion of window 3.55 x 2.4 meter Bottom fix window & above which sliding window - 3 track - 4 Glass Shutter Sq.m 30
18 Providing & Fixing Laminated Flush Door as per design and colour of laminate on both side. Flush door shutters 30mm thk with solid core cover ISI mark with 1mm thick laminate on both sides as per design and directed by Incharge. Teak wood Lipping, where specified, shall be provided internally on all edges of the shutters with matching oil paint of laminate. Including all Hardware fittings of SS 304 like 4 nos 3"X 5" SS Butt Hinges, 12" SS Main Aldrops, SS Main Door Handle 6", SS Tadi Patti & SS Tower Bolt 10" , SS screws for fixing all hardware of required size, Godrej Make- Hydraulic Door Closer with duel speed control , Product Number-1938, etc. complete. 4. Including providing & Fixing Vision Glass 5mm thk 200mm X 150mm fixed in wooden moulding as per design & Drawing. The shutter shall be free from twist or warp in its plane. Sq.m 6
19 Gypsum Board Dry Wall above glass Partition- Providing and fixing partition at ceiling height above 2.5 mtr to 4m consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/Sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm Dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm Dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work and bottom of wall by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and as per manufacture's specification and direction of engineer in charge all complete.Including H frame or Cup lock scaffolding or Aluminium Ladder only. Sq.m 20
20 Supply and Fixing of Double Glazed Glass partition of 12mm Toughened Glass on both sides using DORMA Alexa System-100-DG Frames to a height of maximum 4m or as per drawing. The Fixed glass to be fixed using DORMA Alexa BP100-DG Profiles at Top & Bottom & Alexa SP100-DG at sides. The profile size of 100x25MM to be fixed on to the floor/wall/ ceiling as per the architect design. DORMA Alexa H Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design. In case of Glass overall panel Alexa OHP100-DG Over panel Profile to be used. In case of Open glass edges EP100-DG End Profile to be used. The Alexa profiles shall be suitable for Glass thickness of 10/12/13.52mm.The Profile shall be matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system. All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing. System should achive DB Difference of 30-35 DB. Approved Manufacturer: Profiles/Frames: DORMA, Glass : Saint Gobain/Asahi Sq.m 40
21 Providing & Fixing of Dormakaba make Alterra Lite45 Rebate door for glass, including Rebate Door Frame with necessary seals in EV1 Grey Finish and hardware in EV1 Grey/SS Finish as Corner Hinge, TS 71 door closer with slide channel & Hold open unit, D Type Pull Handle 300mm , bottom center lock with both side key cylinder 60mm and strick plate, door stopper, Etc. Door Dimension including door frame-1000 mm (W) x2400mm (H) including 12 mm thick clear toughened glass. EA 2
22 Providing and fixing aluminium partition - Providing and fixing Aluminium Fixed Partition & windows with extruded built up standard tubular sections/appropriate Z and other sections of JIndal & equivalent approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Partition with 50% -5.5 mm clear glass (saint Gobain or equivalent),and 50%-12 mm thick prelaminated particle board (IS 12823 Grade I ,Type II, combination of this board and glass shall be as directed by EIC) with approved colour lamination on both side ) Anodised aluminium (anodised transparentor dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Double Partition section of 16 Gauge with mimimum unit wt.0.805kg/rmt & Single Partition section of 16 Gauge with minimum unit wt.0.758 kg/rmt.
22A For Fixed Partitions with fully laminated or 50% Glazing with 5 mm clear Glass ( saint Gobain or equivalent ) and 50% 12mm thick prelaminated particle board with decorative laminate on both sides, flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed with C.P. brass / stainless steel screws etc. complete as per directions of engineer-in-charge , for partitions with aluminium members at average 1.2m horizontal spacing with approximate height as 4m. Sq.m 5
22B For Fixed Partitions with 12mm thick prelaminated particle board with decorative laminate on both sides, flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed with C.P. brass / stainless steel screws etc. complete as per directions of engineer-in-charge , Sq.m 25
23 External paint: Providing and applying Premium Acrylic (100% Acrylic) Smooth exterior paint with Silicone additives of required shade using Asian, Nerolac, Berger, Dulux or approved paint, including base preparation by cleaning with Jet wash, preparing the surface by thoroughly cleaning/ washing oil, grease, dirt and other foreign matter and sand papering, priming etc. as per standard specifications of CPWD. Two or more coats applied @ 1.43 litre/ 10 Sqm as per manufacturers specification at any height and any location, including masking, cleaning etc. complete as directed by engineer in charge. Scope also includes filling of cracks with crack seal and external grade putty for levelling the surface wherever required, necessary tools & tackles, all leads & lifts etc. complete. Colour in pattern or single colour as per EIC. While working at height contractor can use Spider with safety lifeline or scaffolding/cup lock or other suitable safe system as per requirement. Use of advance machinery such as JLG, cherry picker, Crane with bucket etc. at no extra cost will be appreciated but not compulsory. Contractor has to provide all necessary PPE`s to highly skilled labours to execute the work. Contractor should depute the labours who have work experience of Woking on height & has no vertigo issue. Working on Zula & bamboo scaffold is strictly prohibited. Max height above ground is up to 12 meters Mode of measurement: Actual surface area of work in Sqm Sqm 50
24 P/A Plastic Emulsion paint- Providing & applying Painting with Plastic emulsion paint of approved brand (Asian or equivalent make) and manufacture to give an even shade : Two or more coats on new work & old work, including all necessary surface preparation including scrubbing of old paint, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering one coat of putty, one coat of primer and two coats of paint at any height and any location cleaning etc. completed with scaffolding, masking, cleaning as directed by engineer in charge. Sq.m 125
25 P/A Plastic Emulsion paint- Providing & applying Painting with Plastic emulsion paint of approved brand (Asian or equivalent make) and manufacture to give an even shade : Two or more coats on new work & old work, including all necessary surface preparation including scrubbing of old paint, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering one coat of putty, one coat of primer and two coats of paint at any height and any location cleaning etc. completed with scaffolding, masking, cleaning as directed by engineer in charge. Sqm 60
26 Decorative film over glass partition: Application of decorative film( 3M, Garware or equivalent higher approved brand) over glass partition, involves the meticulous cleaning and degreasing of the glass surface to ensure a completely dust-free base for adhesion. It includes the precise measurement and custom cutting of high-quality decorative film—such as frosted, etched, or patterned designs—followed by its expert application using professional wetting solutions and squeegeeing techniques to eliminate air bubbles, wrinkles, or peeling. The scope covers the careful trimming of edges for a seamless fit against the frames, the use of all necessary tools like precision cutters and sprayers, and the provision of any required ladders or scaffolding for high-level panels. This comprehensive rate accounts for the cost of the film, specialized labor, and final site cleanup to remove any film trimmings or residues, provided as an all-inclusive rate per unit of measurement. Scope includes all wastage. Measurement apllication area lenght x height Sqm 30
27 Suncontrol film: Providing and Fixing Dark Sun control films (Garware-NR Grey 05 OR Equivalent approved make) -Thickness 1Mil, Visual Light Transmission 4%, Visible Light Reflectance 6%, Solar Energy transmittance 41%, Solar Energy Reflectance 6%, Solar Energy Absorbance 53%, Ultra Violet Transmittance< 1%, Glare Reduction 96%, Total Solar energy rejection 44%)on Glass to reduce glare from sunlight, from brands 3M# or Garware or approved equivalent Brand including glass cleaning before application etc. complete Sqm 30
28 Decorative wooden wall moulding: Providing and fixing designer wall moulding panels using high-density MDF mouldings (moisture-resistant)/wooden wall moulding using approved quality sections in required profile arranged in classic/modern panel layout, fixed with adhesive and mechanical fasteners, including finishing with PU/duco paint, complete as per approved sample and drawings. Mtr 25
29 Decorative false ceiling MDF/ Acrylic Jali: Providing & fixing designer ceiling jali using high-density MDF/acrylic with intricate CNC/laser-cut patterns, fixed on engineered suspension system, finished with PU coating / backlit acrylic effect, complete as per approved mock-up. including support structure, cutting, fixing, finishing, and complete installation Sqm 5
30 Supply of skilled Labour : Supply of skilled labour to carry out Skilled work apart from above mentioned specific work, including necessary tools & tackles and consumables EA 3
31 Supply of Unskilled labour: Supply of semiskilled labour to carry out semi-Skilled work apart from above mentioned specific work, including necessary tools & tackles EA 3
Amount in words - Rs
Contractor`s sign
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.00 MB
TechnicalTEnder.pdf
Tender Documents • 0.57 MB
HRMACYBERSECURITYOFFICEFURNITURELAYOUTKOTHARUD.pdf
Tender Documents • 0.40 MB
PriceBid.xls
Tender Documents • 0.06 MB
ExistingDrawing.pdf
Tender Documents • 0.02 MB
Download all tender documents and submit your bid